I did build orientDB and appserver on docker. They are running as well. This is list containers on docker:
core#localhost ~ $ docker ps
CONTAINER ID IMAGE COMMAND CREATED
STATUS PORTS
NAMES
01abef0204a7 fxrialab/appserver:latest /usr/sbin/httpd -D F 30 minute
s ago Up 30 minutes 0.0.0.0:443->443/tcp, 0.0.0.0:80->80/tcp
appserver
f6d0631bb092 fxrialab/orient:latest /bin/sh -c cd /opt/o 30 minute
s ago Up 30 minutes 0.0.0.0:2424->2424/tcp, 0.0.0.0:2480->2480/tcp
appserver/db,orient
ebc1386250b9 fxrialab/data:latest /usr/sbin/sshd -D 30 minute
s ago Up 30 minutes 0.0.0.0:2200->22/tcp
data
Also i did create database on orientDB. I think orient is working fine. However when i login to my website. I got errors "Connection refused" like this:
Socket error #111: Connection refused
• vendors/OrientDB/OrientDB.php:254
OrientDBSocket->__construct('localhost','2424',30)
• apps/models/DB.php:11 OrientDB->__construct('localhost','2424')
I dont know what reason althought i did test fine on local when i enabled server.bat file. Ah, i using orientdb-1.7
Thank for advance !
localhost is a synonim for ip address 127.0.0.1
your binds are for 0.0.0.0
I am not familiar with OrientDB, but I believe that what you are facing is ports access problem (server configuration), not software problem (in this case software is OrientDB). Most servers are configured to block all ports, unless specifically allowed - for security reasons, so that noone can connect to the server on those blocked ports.
So, what is probably happening is that your local server is fine with using those ports, and remote server is secured and thus prevents connections.
Docker is running a virtual machine with separate network interface for each containers. Thus if your appserver connects to localhost, it won't see the orientdb.
You need to update your configuration to lookup the proper environment variable for the link (see http://docs.docker.com/userguide/dockerlinks/) or just use the db host. Docker injects a hostname into /etc/hosts for each linked container.
I've found cause of this issue, because im config HOST to connect is wrong. It's not localhost because docker uses its own internal IP's. In ssh type docker inspect orient then use global variables for config to access to IP & Port.
Related
I am getting error:
"Lost connection to MySQL server at 'reading initial communication packet, system error: 0"
while I am going to connect my db.
If I am using localhost everything is working fine.
But when I am using my live IP address like below, it's getting error:
mysql_connect("202.131.xxx.106:xxxx", "xxxx", "xxxxx") or die(mysql_error());
Someone here suggests that it might be a firewall problem:
I have just had this problem and found it was my firewall. I use PCTools Firewall Plus and it wasn't allowing full access to MySQL. Once I changed that it was fine.
Could that be it?
Also, someone here suggests that it might be because the MySQL server is bound to the loop-back IP (127.0.0.1 / localhost) which effectively cuts you off from connecting from "outside".
If this is the case, you need to upload the script to the webserver (which is probably also running the MySQL server) and keep your server host as 'localhost'
Open mysql configuration file named my.cnf and try to find "bind-address", here replace the setting (127.0.0.1 OR localhost) with your live server ip (the ip you are using in mysql_connect function)
This will solve the problem definitely.
Allow remote connect to MySQL.
Edit file:
>sudo nano /etc/mysql/my.cnf
Comment line:
#bind-address = 127.0.0.1
Restart MySQL:
>sudo service mysql restart
Create user for remote connection.
>mysql -uroot -p
CREATE USER 'developer'#'localhost' IDENTIFIED BY 'dev_password';
CREATE USER 'developer'#'%' IDENTIFIED BY 'dev_password';
GRANT ALL ON *.* TO 'developer'#'localhost';
GRANT ALL ON *.* TO 'developer'#'%';
In my case I need to connect remotely from Windows to VirtualBox machine with Ubuntu. So I need to allow port 3306 in iptables:
>iptables -A INPUT -i eth0 -p tcp -m tcp --dport 3306 -j ACCEPT
Had this problem when setting up a new slave server. Found it was the slave server IP address was missing from the master server /etc/hosts.allow file. Added the IP address and it let me connect to the master server.
Note that I use hosts.allow and hosts.deny to control access.
I had this problem and it ended up being the prior sys admin changed the port MySQL was running on. MySQL Workbench was trying to connect to the default 3306 but the server was running on 20300.
The error means that it didn't receive a response from the port it expected to find the server on. The causes range from contacting the wrong machine (For one of a number of reasons) to the server not being on the expected port.
Check which port your server is bound to in /etc/mysql/my.cnf. Does that correspond to what is in your connect statement. If they match then try connecting with mysql from the server itself and from the command line of the machine where you are running the client. If it works form one place and not another then you may have a firewall / router configuration issue.
One more reason...
I ran into an Ubuntu server where everything was customized and could not connect because of that same error.
This setting was inside /etc/ssh/sshd_config
PermitTunnel no
After turning into
PermitTunnel yes
I was able to connect remotely to my MySQL DB
The problem on my case was MySQL being bind only to the lo on linux.
in order to solve the problem i have edited the my.cnf (found at /etc/mysql/my.cnf) removing the line bind-address=127.0.0.1
this allows mysql to bind to any network interface
I just set up mysql on a windows box. I got the OP's error when trying to connect with the Navicat MySql client on the same box. I had to specify 127.0.0.1 as the host, and that got it.
localhost, or the servers actual ip address both did not work.
This error occurred to me while trying to connect to the Google Cloud SQL using MySQL Workbench 6.3.
After a little research I found that my IP address has been changed by the internet provider and he was not allowed in the Cloud SQL.
I authorized it and went back to work.
I faced the same problem. I checked and tried to set AllowTcpForwarding Yes but it was missing in my sshd_config so no help.I didn't change sshd_config or my.cnf. Make sure the ssh hostname is NOT the same with the mysql hostname(use localhost).
In workbench, choose + to add new connection and set the following:
connection method: standard TCP/IP over SSH
SSH Hostname: 192.168.0.50:22 (replace remote SSH server IP and port(optional))
SSH Username: sshuser
You can set password or add at the prompt
MYSQL Hostname: localhost or 127.0.0.1
MYSQL Server port:3306
You can set password or add at the prompt
Test connection. It should be successful then hit OK.Viola!
I ran into this exact same error when connecting from MySQL workbench. Here's how I fixed it. My /etc/my.cnf configuration file had the bind-address value set to the server's IP address. This had to be done to setup replication. Anyway, I solved it by doing two things:
create a user that can be used to connect from the bind address in the my.cnf file
e.g.
CREATE USER 'username'#'bind-address' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON schemaname.* TO 'username'#'bind-address';
FLUSH PRIVILEGES;
change the MySQL hostname value in the connection details in MySQL workbench to match the bind-address
The problem for me was that DNS queries were blocked by the FW within the subnet. The solution was to disable DNS lookups within MySQL.
The problem was quite stupid for me.
I used to get the same issue on AWS EC2 Ubuntu machine (MariaDB is installed locally for the time being), so I tried to make SSH tunneling, and had the same issue. So I tried to ssh tunnel over terminal:
ssh -L13306:127.0.0.1:3306 root#ip.address -i my/private/key.pem
And it told me this:
Please login as the user "ubuntu" rather than the user "root".
I changed ssh user from root to ubuntu, just like my ssh config, and it connected just fine.
So check your SSH connecting user.
I oversaw this, so this too half an hour of my time, so I hope this will be useful for you.
For me the config file was found "/etc/mysql/mysql.conf.d/mysqld.cnf" commenting out bind address did the trick.
As we can see here:
Instead of skip-networking the default is now to listen only on
localhost which is more compatible and is not less secure.
I am trying to connect my db docker container on Ubuntu 18.04, same problem.
First check your device by run nmcli dev to check if device docker0 is connected.
If it is not connected, try to restart docker service:
sudo service docker restart
I tried make a telnet over remote server on port 3306.
The error message is clear
Host 'x.x.x.x' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'Connection closed by foreign host.
As root at server mysqladmin flush-hosts worked at all!
I had the same error when using localhost. I restarted the MySQL service and it worked fine.
in my case, I had ALL: ALL in hosts.deny. Changing this to ALL: PARANOID solved my problem when connecting over ssh
Ran into this same issue, Bind Address back and forth to no avail. Solution for me was flushing privileges.
mysql> FLUSH PRIVILEGES;
Firewalld blocks the IP address. so to give access, use these commands:
firewall-cmd --permanent --zone=trusted --add-source=YOUR_IP/32
firewall-cmd --permanent --zone=trusted --add-port=3306/tcp
firewall-cmd --reload
For me setting bind-address = 0.0.0.0 in mysql/my.cnf worked. It basically listens to all addresses (but still one port) then.
And don't forget restart your server: systemctl restart mysql
I just had the same problem, but in my case I solved it with
service mysqld start
In my case it was the university wifi blocking port 3306. I was able to connect by using a mobile hotspot.
Change to a mobile hotspot or another network, and if it works there, then you know that original network is blocking port 3306. If you get the same error on more than 1 network, then you know it's specific to your machine.
I had port 3306 in Docker container but in Dockerfile it was 33060. I edited the port in Docker container to 33060
Must have been added to the Dockerfile
ENV MYSQL_ROOT_HOST 172.17.0.1
I have done below 3 steps then working for me.
bind-address = "YOUR MACHINE IP" in my.cnf file at /etc/my.cnf
Restart service by command : service mysql restart
GRANT ALL PRIVILEGES ON yourDB.* TO 'username'#'YOUR_APPLICATION_IP' IDENTIFIED BY 'YOUR_PASSWORD' WITH GRANT OPTION;
I had the same issue installing MySQL docker image then trying to connect from WSL2 MySQL client.
As it was stated in the accepted answer that it should be a firewall issue, in my case this error was caused due to not allowing docker for windows to communicate to private network.
I changed the settings on "Firewall & network protection", "allow an app through firewall", "change settings" (need administrator rights) and allowed "Docker desktop backend" to connect to private network.
I had the same error on my Mac with a local MySQL installation. The problem was that the number files that MySQL was opening was too high for MacOS.
To see if you have the same problem you can run this command and look for File Descriptor errors:
tail -200 /usr/local/var/mysql/$(whoami).err | grep "Warning"
I added this line to my.cnf file and the problem was fixed:
table_open_cache = 200
Had the same problem, what worked for me was:
Go to Windows Firewall where you allow applications.
mysql probably won't be in the list, so you need to add it, its path is typically C:/Program Files (x86)/MySQL/bin/mysql
Mark both private and public networks, apply.
When connecting to Mysql remotely, I got the error.
I had this warning in /var/log/mysqld.log:
[Warning] IP address 'X.X.X.X' could not be resolved: Temporary failure in name resolution
I just added this line to /etc/hosts file:
X.X.X.X some_name
Problem solved! Not using skip-name-resolve caused some errors in my local app when connecting to MySQL.
Good day,
I am using Kubernetes to run containers on the google container engine.
The idea is to run two containers in a pod. One container uses the docker mysql image, the other runs php, laravel, nginx and composer.
Locally, this works. The idea is that the php can connect to the database on localhost, and this should work if both containers are in the same pod. However, when the pod is launched, we see the following message in the log:
SQLSTATE[HY000] [2002] Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
The only difference is that when testing locally, I change localhost to the internal docker ip.
Thanks and good day
On Unix, MySQL programs treat the host name localhost specially, in a way that is likely different from what you expect compared to other network-based programs. For connections to localhost, MySQL programs attempt to connect to the local server by using a Unix socket file. This occurs even if a --port or -P option is given to specify a port number. To ensure that the client makes a TCP/IP connection to the local server, use --host or -h to specify a host name value of 127.0.0.1, or the IP address or name of the local server. You can also specify the connection protocol explicitly, even for localhost, by using the --protocol=TCP option. For example:
shell> mysql --host=127.0.0.1
shell> mysql --protocol=TCP
The --protocol option enables you to establish a particular type of connection even when the other options would normally default to some other protocol.
The other solution is using Kubernetes Volume abstraction to share a path between containers. Edit /etc/mysql/my.cnf on both containers' images and change socket location for both MySQL server and client to point to the shared directory or disk.
MySQL comes preconfigured to only support named pipe connections on the localhost, if you are going to connect to it from another logical machine you need to locate the following line in your my.cnf file...
#bind-address = 127.0.0.1
and replace it with...
bind-address = {your network ip here}
Once you have enabled the bind address restart your mysql server, check the error log to ensure that no exceptions occurred with binding the address, and then login as root and create a new user account attached to that ip address which you can then use to access MySQL from any other logical machine as long as you connect to it using the IP address you defined in my.cnf.
Please note by default the root account is only accessible from the localhost so you will either need to create a new user account or alter the root account to support remote connections (not secure)
In OS X Mavericks (and newer), start a PHP server from the command line:
cd to/your/directory
php -S localhost:8888
It works, but the server only available on that computer only. Is there a way to test it on other devices within the same LAN?
EDIT:
You will want to launch the server with the command
php -S 0.0.0.0:8888
This will allow you to access the server remotely (see docs http://php.net/manual/en/features.commandline.webserver.php)
After this is done there are 2 ways to view the site on your local network
http://192.168.1.2:8888 where 192.168.1.2 is the IP address of your computer which you can find in your System Preferences under Network.
http://myMac.local:8888 where myMac is your local computer name which you can find in your System Preferences under Sharing.
REMEMBER: Both of these options may require your firewall to allow incoming traffic to port 8888 (or whatever port your script is listening on), if you have that running.
Start with:
php -S 0.0.0.0:8888
otherwise you bind the server to localhost;
XAMPP server should run on port : 80 by default, but here in our case XAMPP server running on multiple ports shown in the span short below.
Why it happens and how to prevent this?
Also TaskMgr shows two apache services running:
XAMPP httpd.conf file is here:
After running 2 or 3 hours XAMPP server, Server got slow and not responding where I think the problem would be generated by the multiple open ports?
Any idea? how to block and allow only port 80 as it is already by default?
it's mostly because of internal connections between apache and another service on the server.
for example it could be because connecting to 3306 (mysql)
to find out that you can use netstat button on the right of the xampp panel
or type this command in command prompt (DOS)
netstat -na
e.g: if you saw lots of :3306 it means that you did not close mysql connection!
I am getting error:
"Lost connection to MySQL server at 'reading initial communication packet, system error: 0"
while I am going to connect my db.
If I am using localhost everything is working fine.
But when I am using my live IP address like below, it's getting error:
mysql_connect("202.131.xxx.106:xxxx", "xxxx", "xxxxx") or die(mysql_error());
Someone here suggests that it might be a firewall problem:
I have just had this problem and found it was my firewall. I use PCTools Firewall Plus and it wasn't allowing full access to MySQL. Once I changed that it was fine.
Could that be it?
Also, someone here suggests that it might be because the MySQL server is bound to the loop-back IP (127.0.0.1 / localhost) which effectively cuts you off from connecting from "outside".
If this is the case, you need to upload the script to the webserver (which is probably also running the MySQL server) and keep your server host as 'localhost'
Open mysql configuration file named my.cnf and try to find "bind-address", here replace the setting (127.0.0.1 OR localhost) with your live server ip (the ip you are using in mysql_connect function)
This will solve the problem definitely.
Allow remote connect to MySQL.
Edit file:
>sudo nano /etc/mysql/my.cnf
Comment line:
#bind-address = 127.0.0.1
Restart MySQL:
>sudo service mysql restart
Create user for remote connection.
>mysql -uroot -p
CREATE USER 'developer'#'localhost' IDENTIFIED BY 'dev_password';
CREATE USER 'developer'#'%' IDENTIFIED BY 'dev_password';
GRANT ALL ON *.* TO 'developer'#'localhost';
GRANT ALL ON *.* TO 'developer'#'%';
In my case I need to connect remotely from Windows to VirtualBox machine with Ubuntu. So I need to allow port 3306 in iptables:
>iptables -A INPUT -i eth0 -p tcp -m tcp --dport 3306 -j ACCEPT
Had this problem when setting up a new slave server. Found it was the slave server IP address was missing from the master server /etc/hosts.allow file. Added the IP address and it let me connect to the master server.
Note that I use hosts.allow and hosts.deny to control access.
I had this problem and it ended up being the prior sys admin changed the port MySQL was running on. MySQL Workbench was trying to connect to the default 3306 but the server was running on 20300.
The error means that it didn't receive a response from the port it expected to find the server on. The causes range from contacting the wrong machine (For one of a number of reasons) to the server not being on the expected port.
Check which port your server is bound to in /etc/mysql/my.cnf. Does that correspond to what is in your connect statement. If they match then try connecting with mysql from the server itself and from the command line of the machine where you are running the client. If it works form one place and not another then you may have a firewall / router configuration issue.
One more reason...
I ran into an Ubuntu server where everything was customized and could not connect because of that same error.
This setting was inside /etc/ssh/sshd_config
PermitTunnel no
After turning into
PermitTunnel yes
I was able to connect remotely to my MySQL DB
The problem on my case was MySQL being bind only to the lo on linux.
in order to solve the problem i have edited the my.cnf (found at /etc/mysql/my.cnf) removing the line bind-address=127.0.0.1
this allows mysql to bind to any network interface
I just set up mysql on a windows box. I got the OP's error when trying to connect with the Navicat MySql client on the same box. I had to specify 127.0.0.1 as the host, and that got it.
localhost, or the servers actual ip address both did not work.
This error occurred to me while trying to connect to the Google Cloud SQL using MySQL Workbench 6.3.
After a little research I found that my IP address has been changed by the internet provider and he was not allowed in the Cloud SQL.
I authorized it and went back to work.
I faced the same problem. I checked and tried to set AllowTcpForwarding Yes but it was missing in my sshd_config so no help.I didn't change sshd_config or my.cnf. Make sure the ssh hostname is NOT the same with the mysql hostname(use localhost).
In workbench, choose + to add new connection and set the following:
connection method: standard TCP/IP over SSH
SSH Hostname: 192.168.0.50:22 (replace remote SSH server IP and port(optional))
SSH Username: sshuser
You can set password or add at the prompt
MYSQL Hostname: localhost or 127.0.0.1
MYSQL Server port:3306
You can set password or add at the prompt
Test connection. It should be successful then hit OK.Viola!
I ran into this exact same error when connecting from MySQL workbench. Here's how I fixed it. My /etc/my.cnf configuration file had the bind-address value set to the server's IP address. This had to be done to setup replication. Anyway, I solved it by doing two things:
create a user that can be used to connect from the bind address in the my.cnf file
e.g.
CREATE USER 'username'#'bind-address' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON schemaname.* TO 'username'#'bind-address';
FLUSH PRIVILEGES;
change the MySQL hostname value in the connection details in MySQL workbench to match the bind-address
The problem for me was that DNS queries were blocked by the FW within the subnet. The solution was to disable DNS lookups within MySQL.
The problem was quite stupid for me.
I used to get the same issue on AWS EC2 Ubuntu machine (MariaDB is installed locally for the time being), so I tried to make SSH tunneling, and had the same issue. So I tried to ssh tunnel over terminal:
ssh -L13306:127.0.0.1:3306 root#ip.address -i my/private/key.pem
And it told me this:
Please login as the user "ubuntu" rather than the user "root".
I changed ssh user from root to ubuntu, just like my ssh config, and it connected just fine.
So check your SSH connecting user.
I oversaw this, so this too half an hour of my time, so I hope this will be useful for you.
For me the config file was found "/etc/mysql/mysql.conf.d/mysqld.cnf" commenting out bind address did the trick.
As we can see here:
Instead of skip-networking the default is now to listen only on
localhost which is more compatible and is not less secure.
I am trying to connect my db docker container on Ubuntu 18.04, same problem.
First check your device by run nmcli dev to check if device docker0 is connected.
If it is not connected, try to restart docker service:
sudo service docker restart
I tried make a telnet over remote server on port 3306.
The error message is clear
Host 'x.x.x.x' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'Connection closed by foreign host.
As root at server mysqladmin flush-hosts worked at all!
I had the same error when using localhost. I restarted the MySQL service and it worked fine.
in my case, I had ALL: ALL in hosts.deny. Changing this to ALL: PARANOID solved my problem when connecting over ssh
Ran into this same issue, Bind Address back and forth to no avail. Solution for me was flushing privileges.
mysql> FLUSH PRIVILEGES;
Firewalld blocks the IP address. so to give access, use these commands:
firewall-cmd --permanent --zone=trusted --add-source=YOUR_IP/32
firewall-cmd --permanent --zone=trusted --add-port=3306/tcp
firewall-cmd --reload
For me setting bind-address = 0.0.0.0 in mysql/my.cnf worked. It basically listens to all addresses (but still one port) then.
And don't forget restart your server: systemctl restart mysql
I just had the same problem, but in my case I solved it with
service mysqld start
In my case it was the university wifi blocking port 3306. I was able to connect by using a mobile hotspot.
Change to a mobile hotspot or another network, and if it works there, then you know that original network is blocking port 3306. If you get the same error on more than 1 network, then you know it's specific to your machine.
I had port 3306 in Docker container but in Dockerfile it was 33060. I edited the port in Docker container to 33060
Must have been added to the Dockerfile
ENV MYSQL_ROOT_HOST 172.17.0.1
I have done below 3 steps then working for me.
bind-address = "YOUR MACHINE IP" in my.cnf file at /etc/my.cnf
Restart service by command : service mysql restart
GRANT ALL PRIVILEGES ON yourDB.* TO 'username'#'YOUR_APPLICATION_IP' IDENTIFIED BY 'YOUR_PASSWORD' WITH GRANT OPTION;
I had the same issue installing MySQL docker image then trying to connect from WSL2 MySQL client.
As it was stated in the accepted answer that it should be a firewall issue, in my case this error was caused due to not allowing docker for windows to communicate to private network.
I changed the settings on "Firewall & network protection", "allow an app through firewall", "change settings" (need administrator rights) and allowed "Docker desktop backend" to connect to private network.
I had the same error on my Mac with a local MySQL installation. The problem was that the number files that MySQL was opening was too high for MacOS.
To see if you have the same problem you can run this command and look for File Descriptor errors:
tail -200 /usr/local/var/mysql/$(whoami).err | grep "Warning"
I added this line to my.cnf file and the problem was fixed:
table_open_cache = 200
Had the same problem, what worked for me was:
Go to Windows Firewall where you allow applications.
mysql probably won't be in the list, so you need to add it, its path is typically C:/Program Files (x86)/MySQL/bin/mysql
Mark both private and public networks, apply.
When connecting to Mysql remotely, I got the error.
I had this warning in /var/log/mysqld.log:
[Warning] IP address 'X.X.X.X' could not be resolved: Temporary failure in name resolution
I just added this line to /etc/hosts file:
X.X.X.X some_name
Problem solved! Not using skip-name-resolve caused some errors in my local app when connecting to MySQL.