I have a database named creative_db Table name is store_weblinks. Now inside this table there are several columns that holds the entire site's weblinks. My focus is on this column - weblinks_status
Now weblinks_status contains 2 values = waiting and live
So here's what I intend to do - Update any 10 waiting to live status.
I think I need a loop of some kind that would keep a count of how many successful edits are taking place. Once that hits 10 it will stop processing..
So, its like this -- Check if the current item of weblinks_status is waiting. If it is waiting then change it to live and increment the loop counter else proceed to the next waiting item..
Need your help!
Try this STATEMENT:
UPDATE store_weblinks
SET weblinks_status="live"
WHERE weblinks_status="waiting"
LIMIT 10;
This should work to update any 10 entries from waiting to live.
Related
Hi have a bunch of unique codes in a database which should only be used once.
Two users hit a script which assigns them at the same time and got the same codes!
The script is in Magento and the user can order multiple codes. The issue is if one customer orders 1000 codes the script grabs the top 1000 codes from the DB into an array and then runs through them setting them to "Used" and assigning them to an order. If a second user hits the same script at a similar time the script then grabs the top 1000 codes in the DB at that point in time which crosses over as the first script hasn't had a chance to finish assigning them.
This is unfortunate but has happened quite a few times!
My idea was to create a new table, once the user hits the script a row is made with "order_id" "code_type". Then in the same script a check is done so if a row is in this new table and the "code_type" matches that of which the user is ordering it will wait 60 seconds and check again until the previous codes are issued and the table is empty where it will then create a row and off it goes.
I am not sure if this is the best way or if two users hit at the same second again whether two rows will just be inserted and off we go with the same problem!
Any advice is much appreciated!
The correct answer depends on the database you use.
For example in MySQL with InnoDB the possible solution is a transaction with SELECT ... LOCK IN SHARE MODE.
Schematically it works this by firing following queries:
START TRANSACTION;
SELECT * FROM codes WHERE used = 0 LIMIT 1000 LOCK IN SHARE MODE;
// save ids
UPDATE codes SET used=1 WHERE id IN ( ...ids....);
COMMIT;
More information at http://dev.mysql.com/doc/refman/5.7/en/innodb-locking-reads.html
I'm developing a web application with PHP and MySQL in that I have a situation where I have to limit the number of records to be inserted in a table.
...
const MAX= 10
if(/*record count query*/ < $this::MAX) {
/*insert query*/
}
...
For test purpose I'm triggering this code just by using GET request from the browser.
When I click F5 Key(refresh) continuously for about 5 seconds the count exceeds the MAX.
But when I go one by one the count is with in the limit.
This shows that when I click F5 continuously count query got executed while the insert query is executing simultaneously. I have no idea on how to solve this problem some guidance would be helpful to me.
You have to LOCK the table so no other process writes to the database when you are trying to get the current count. Otherwise you are always under the risk that another process currently inserts the data.
For performance reasons, you may use another table just as a counter, which you will lock during those operations.
I have a cron task running every x seconds on n servers. It will "SELECT FROM table WHERE time_scheduled<CURRENT_TIME" and then perform a lengthy task on this result set.
My problem is now: How do I avoid having two seperate servers perform the same task at the same time?
The idea is to update *time_scheduled* with a set interval after selecting it. But if two servers happen to run the query at the same time, that will be too late, no?
All ideas are welcome. It doesnt have to be a strict MySQL solution.
Thanks!
I am guessing you have a single MySQL instance, and connections from your n servers to run this processing job. You're implementing a job queue here.
The table you mention needs to use the InnoDB access method (or one of the other transaction-friendly access methods offered by Percona or MariaDB).
Do these items in your table need to be processed in batches? That is, are they somehow inter-related? Or is it possible for your server processes to handle them one-by-one? This is an important question, because you'll get better load balancing between your server processes if you can handle them individually or in small batches. Let's assume the small batches.
The idea is to prevent any server process from grabbing onto a row in your table if some other server process has that row. I've had to do this kind of thing a lot, and here is my suggestion; I know this works.
First, add an integer column to your table. Call it "working" or some such thing. Give it a default value of zero.
Second, assign a permanent id number to each server. The last part of the server's IP address (for example, if the server's IP address is 10.1.0.123, the id number is 123) is a good choice, because it's probably unique in your environment.
Then, when a server's grabbing work to do, use these two SQL queries.
UPDATE table
SET working = :this_server_id
WHERE working = 0
AND time_scheduled < CURRENT_TIME
ORDER BY time_scheduled
LIMIT 1
SELECT table_id, whatever, whatever
FROM table
WHERE working = :this_server_id
The first query will consistently grab a batch of rows to work on. If another server process comes in at the same time, it won't ever grab the same rows, because no process can grab rows unless working = 0. Notice that the LIMIT 1 will limit your batch size. You don't have to do this, but you can. I also threw in ORDER BY to process the rows first that have been waiting the longest. That's probably a useful way to do things.
The second query retrieves the information you need to do the work. Don't forget to retrieve the primary key values (I called them table_id) for the rows you're working on.
Then, your server process does whatever it needs to do.
When it's done, it needs to throw the row back into the queue for a later time. To do that, the server process needs to set the time_scheduled to whatever it needs to be, then to set working = 0. So, for example, you could run this query for each row you're processing.
UPDATE table
SET time_scheduled = CURRENT_TIME + INTERVAL 5 MINUTE,
working = 0
WHERE table_id = ?table_id_from_previous_query
That's it.
Except for one thing. In the real world these queuing systems get fouled up sometimes. Server processes crash. Etc. Etc. See Murphy's Law. You need a monitoring query. That's easy in this system.
This query will give a list of all jobs that are more than five minutes overdue, along with the server that's supposed to be working on them.
SELECT working, COUNT(*) stale_jobs
FROM table
WHERE time_scheduled < CURRENT_TIME - INTERVAL 5 MINUTE
GROUP BY WORKING
If this query comes up empty, all is well. If it comes up with lots of jobs with working set to zero, your servers aren't keeping up. If it comes up with jobs with working set to some server's id number, that server is taking a lunch break.
You can reset all the jobs assigned to the server that's gone to lunch with this query, if need be.
UPDATE table
SET working=0
WHERE working=?server_id_at_lunch
By the way, a compound index on (working, time_scheduled) will probably help this perform well.
I have to update a 100,000 + MySQL database from PHP that pulls data from an API. It fails if I try and do more than 5,000 at the time.
I'm thinking the best approach might be to do 5,000 by using an update query with a limit 0, 5000 and then timestamping these records with the time they are updated. Then, select the next 5,000 where the time last updated is over 20 minues since current time.
Can anyone please offer any help on how to construct this query? Or is this approach not optimal?
So this is the solution I have gone with, rightly or wrongly it works. So to recap the problem, I have 100k rows, I need to loop through these and pass a userid to an API that returns a json feed.
I use the data returned to update each record. For some reason this fails either becasue of a timeout or server 500 error which I believe to be due to the API. So instead of selecting all 100k reords, I just select 5k (limit 0, 5000) and add a column called 'updated' and mark this as true once it has updated.
I keep doing this until all records are updated. When this happens I set the updated column to false and start the process again. This script runs on a chron job every 30 minutes and seems to work fine. I guess I could discover why it was timing out in the first place but I suspect it could be a php ini issue (timeout setting) which I don'thave access to.
Thanks
Jonathan
Create a temporary table, multi insert the update data and then
UPDATE `table`, `tmp`
SET `table`.`column` = `tmp`.`column`
WHERE `table`.`id` = `tmp`.`id`;
I would like to do a lot of inserts, but could it be possible to update mysql after a while.
For example if there is a query such as
Update views_table SET views = views + 1 WHERE id = 12;
Could it not be possible to maybe store this query until the views have gone up to 100 and then run the following instead of running the query from above 100 times.
Update views_table SET views = views + 100 WHERE id = 12;
Now, lets say that is done, then comes the problem of data integrity. Let's say, there are 100 php files open which are all about to run the same query. Now unless there is a locking mechanism on incrementing the cached views, there is a possibility that multiple files may have a same value of the cached view, so lets say process 1 may have 25 cached views and php process 2 may have 25 views and process 3 may have 27 views from the file. Now lets say process 3 finishes and increments the counter to 28. Then lets say php process is about finish and it finished just after process 3, which means that the counter would be brought back down to 26.
So do you guys have any solutions that are fast but are data secure as well.
Thanks
As long as your queries use relative values views=views+5, there should be no problems.
Only if you store the value somewhere in your script, and then calculate the new value yourself,you might run into trouble. But why would you want to do this? Actually, why do you want to do all of this in the first place? :)
If you don't want to overload the database, you could use UPDATE LOW_PRIORITY table set ..., the LOW_PRIORITY keyword will put the update action in a queue and wait for the table to no longer be used by reads or inserts.
First of all: with these queries: regardless of when a process starts, the UPDATE .. SET col = col + 1 is a safe operation, so it will not 'decrease' the counter, ever.
Regarding to 'store this query until the views have gone up to 100 and then run the following instead of running the query from above 100 times': not really. You can store a counter in faster memory (memcached comes to mind), with a process that transfers it to the database once in a while, or store it in another table with a AFTER UPDATE trigger, but I don't really see a point doing that.