I'm grabbing data out of an API, and every once in a while, a value comes back in one of the fields I'm capturing that has a comma in it, which is causing my results to be offset by 1 each time it happens.
after I've gotten the results from the API, I put it into $answerSearch, then I json_decode it.
$json = json_decode($answerSearch, true);
foreach ($json['Result']['a']['b'] as $i) {
$y = "{$i['number']},{$i['Type']},{$i['c']},{$i['d']},{$i['e']}";
$x = explode("," , $y);
array_push($output, $x);
}
One of these {$i['number']} values may be "1234,123", and because I use comma as a delimiter, it's causing the entire array to screw up.
How do I tell PHP that the , in the middle of this string is part of the string and not a delimeter?
Update
I can't just change $x = explode("," , $y); to use another delimiter because ,, /, ;, etc are all used in the actual strings that are being returned, I was just using , as an example.
There is no for the conversion from array to string back to an array, to add the selected values to the $output array use:
$output[]=array({$i['number']},{$i['Type']},{$i['c']},{$i['d']},{$i['e']});
Related
Is there any way to do this with preg_replace or other php code?
I have a string that looks like this:
[[10],[11],[2],[3],[5],[1],[10],[15],[20],[21],[14],[16],[17],[6],[9],[4]]
I want to display like this:
[[10,11],[2,3],[5,1],[10,15],[20,21],[14,16],[17,6],[9,4]]
So I replaced the "],[" part with str_replace
$xy1 = str_replace('],[', ',', $xy1);
And now looks like this:
[[10,11,2,3,5,1,10,15,20,21,14,16,17,6,9,4]]
But I need to add an extra "]" after every second number and an extra [ after every second comma ex.:
[[10,11],[2,3],[5,1]
A couple of possibilities:
The string is valid JSON, whether it was intended to be or not, so you can decode it, chunk the resulting array and re-encode it.
$result1 = json_encode(array_chunk(array_column(json_decode($string),0),2));
If you are producing the string in your previous code via json_encode it would be much better to just use array_chunk at that time, but if it's coming from some other source you obviously can't do that.
For this specific string, it may be less cumbersome to pair the numbers with a regex.
$result2 = preg_replace('/(\d+)\D+(\d+)/', '$1,$2', $string);
Or a combination of both ways, extract all the numbers and then chunk and encode.
preg_match_all('/\d+/', $string, $numbers);
$result3 = json_encode(array_chunk($numbers[0], 2), JSON_NUMERIC_CHECK);
This might help, extract the nested array values and then group them by pairs.
$newArray = array_chunk( array_column( $array, 0 ), 2 );
i am making php array count value function i am taking values from file get content and using it in it and want to count values but due to space its not working properly Here is my codes
$data = file_get_contents('testr.txt');
preg_match_all('#mob:-(\S+)-#',$data,$matches);
$nu=$matches[1];
$n=implode($nu,',');
$n="9024453561,9024453561,9024453561,9024453561,9024453561 ";
//in value of $n i am getting spce at end so array_count _value not working
$array = array($n);
$counts = array_count_values($array);
echo $counts['9024453561'];
Using array_map(), map over your data where your call implode like so:
$n=array_map('trim', implode($nu,','));
This will remove any white space you have in your array values.
Hope that helps,
You do not split the string into an array by array($n). Instead you get a single element containing the entire string including commas. Use trim and preg_split to get an array of values.
$n="9024453561,9024453561,9024453561,9024453561,9024453561 ";
$array = preg_split('~\\s*,\\s*~u', trim($n));
$counts = array_count_values($array);
echo $counts['9024453561'];
This also splits a string like " 123 , 456 , 789 ". \s* means zero or more whitespaces. The double slash is to escape the slash in the string literal. trim removes spaces from the begin and the end of the entire string.
There is no need to go through the implode at all, just call array_count_values on your preg_match_all result:
$data = file_get_contents('testr.txt');
preg_match_all('#mob:-(\S+)-#',$data,$matches);
$nu=$matches[1];
$counts = array_count_values($nu);
echo $counts['9024453561'];
I have a text box.
I am enter the value in text box like 12 13 14.
and i am want to convert this into 12,13,14 and then convert it into array and show each separate value.
If your form field asks for the values without a comma, then you will need to explode the POST data by space. What you're doing now is imploding it by comma (you can't implode a string to begin with), and then trying to pass that into a foreach loop. However, a foreach loop will only accept an array.
$ar = explode(' ',$da);
That simple change should fix it for you. You will want to get rid of the peculiar die() after your foreach (invalid syntax, and unclear what you're trying to do there!), and validate your data before the loop instead. By default, if you explode a string and no matching delimiters are found, the result will be an array with a single key, which you can pass into a loop without a problem.
Are you sure you want to expect the user enters data in that particular format? I mean, what if the user uses more than one space character, or separate the numbers actually with commas? or with semicolons? or enters letters instead of numbers? Anyway.. at least you could transform all the spaces to a single space character and then do the explode() as suggested:
$da = trim(preg_replace('/\s+/', ' ', $_POST['imp']));
$ar = explode(' ', $da);
before your foreach().
use explode instead of implode as
The explode() function breaks a string into an array.
The implode() function returns a string from the elements of an array.
and you cannot do foreach operation for a string.
$da=$_POST['imp'];
$ar = explode(' ',$da);
foreach($ar as $k)
{
$q="insert into pb_100_fp (draw_3_fp) values ('".mysqli_real_escape_string($conn, $k)."')";
$rs=mysqli_query($conn, $q);
echo $k.",";
}
then you will get this output
o/p : 12,13,14,
I have a comma separated string stored in a column of data type blob ,with values as given below.
date,time,A,B,C,D
11/31/2013,11:00,20,17,18,11
12/31/2013,14:00,18,16,18,14
10/31/2013,17:00,15,17,10,22
09/31/2013,19:00,19,17,20,17
I want the string parsed and the string containing date and time removed corresonding to its values finally i require it like this
A,B,C,D
20,17,18,11
18,16,18,14
15,17,10,22
19,17,20,17
I tried using
$exp = explode(',',$arr[0]);
$arrayOfReplacements = array(':' => '','/'=>'');
$clean = strtr($arr[0], $arrayOfReplacements);
print_r($clean);
it needs to remove the date,time and its values also.
what more needs to be done ?
You could use something like:
$exp = explode(',',$arr[0]);
array_shift($exp);
array_shift($exp);
$output = implode(',',$exp);
Assuming $arr[0] contains the comma separated values:
echo join(',', array_slice(explode(',', $arr[0]), 2));
See also: array_slice()
Alternatively, use substr() with strpos():
echo substr($arr[0], strpos($arr[0], ',', strpos($arr[0], ',') + 1) + 1);
The above assumes that the format of the blob column can be trusted to have at least two commas.
If the format of date and time columns is not going to change, it can be further simplified:
echo substr($arr[0], 17);
Background
I have an array which I create by splitting a string based on every occurrence of 0d0a using preg_split('/(?<=0d0a)(?!$)/').
For example:
$string = "78781110d0a78782220d0a";
will be split into:
Array ( [0] => 78781110d0a [1] => 78782220d0a )
A valid array element has to start with 7878 and end with 0d0a.
The Problem
But sometimes, there's an additional 0d0a in the string which splits into an extra and invalid array element, i.e., that doesn't begin with 7878.
Take this string for example:
$string = "78781110d0a2220d0a78783330d0a";
This is split into:
Array ( [0] => 78781110d0a [1] => 2220d0a [2] => 78783330d0a )
But it should actually be:
Array ( [0] => 78781110d0a2220d0a [1] => 78783330d0a)
My Solution
I've written the following (messy) code to get around this:
$data = Array('78781110d0a','2220d0a','78783330d0a');
$i = 0; //count for $data array;
$j = 0; //count for $dataFixed array;
$dataFixed = $data;
foreach($data as $packet) {
if (substr($packet,0,4) != "7878") { //if packet doesn't start with 7878, do some fixing
if ($i != 0) { //its the first packet, can't help it!
$j++;
if ((substr(strtolower($packet), -4, 4) == "0d0a")) { //if the packet doesn't end with 0d0a, its 'mostly' not valid, so discard it
$dataFixed[$i-$j] = $dataFixed[$i-$j] . $packet;
}
unset($dataFixed[$i-$j+1]);
$dataFixed = array_values($dataFixed);
}
}
$i++;
}
Description
I first copy the array to another array $dataFixed. In a foreach loop of the $data array, I check whether it starts with 7878. If it doesn't, I join it with the previous array in $data. I then unset the current array in $dataFixed and reset the array elements with array_values.
But I'm not very confident about this solution.. Is there a better, more efficient way?
UPDATE
What if the input string doesn't end in 0d0a like its supposed to? It will stick to the previous array element..
For e.g.: in the string 78781110d0a2220d0a78783330d0a0000, 0000 should be separated as another array element.
Use another positive lookahead (?=7878) to form:
preg_split('/(?<=0d0a)(?=7878)/',$string)
Note: I removed (?!$) because I wasn't sure what that was for, based on your example data.
For example, this code:
$string = "78781110d0a2220d0a78783330d0a";
$array = preg_split('/(?<=0d0a)(?=7878)(?!$)/',$string);
print_r($array);
Results in:
Array ( [0] => 78781110d0a2220d0a [1] => 78783330d0a )
UPDATE:
Based on your revised question of having possible random characters at the end of the input string, you can add three lines to make a complete program of:
$string = "78781110d0a2220d0a787830d0a330d0a0000";
$array = preg_split('/(?<=0d0a)(?=7878)/',$string);
$temp = preg_split('/(7878.*0d0a)/',$array[count($array)-1],null,PREG_SPLIT_NO_EMPTY|PREG_SPLIT_DELIM_CAPTURE);
$array[count($array)-1] = $temp[0];
if(count($temp)>1) { $array[] = $temp[1]; }
print_r($array);
We basically do the initial splitting, then split the last element of the resulting array by the expected data format, keeping the delimiter using PREG_SPLIT_DELIM_CAPTURE. The PREG_SPLIT_NO_EMPTY ensures we won't get an empty array element if the input string doesn't end in random characters.
UPDATE 2:
Based on your comment below where it seems you're implying there might be random characters between any of the desired matches, and you want these random characters preserved, you could do this:
$string = "0078781110d0a2220d0a2220d0a0000787830d0a330d0a000078781110d0a2220d0a0000787830d0a330d0a0000";
$split1 = preg_split('/(7878.*?0d0a)/',$string,null,PREG_SPLIT_NO_EMPTY|PREG_SPLIT_DELIM_CAPTURE);
$result = array();
foreach($split1 as $e){
$split2 = preg_split('/(.*0d0a)/',$e,null,PREG_SPLIT_NO_EMPTY|PREG_SPLIT_DELIM_CAPTURE);
foreach($split2 as $el){
// test if $el doesn't start with 7878 and ends with 0d0a
if(strpos($el,'7878') !== 0 && substr($el,-4) == '0d0a'){
//if(preg_match('/^(?!7878).*0d0a$/',$el) === 1){
$result[ count($result)-1 ] = $result[ count($result)-1 ] . $el;
} else {
$result[] = $el;
}
}
}
print_r($result);
The strategy employed here is different than above. First we split the input string based on the delimiter that matches your desired data, using the nongreedy regex .*?. At this point we have some strings that contain the ending of a desired value and some garbage at the end, so we split again based on the last occurrence of "0d0a" with the greedy regex .*0d0a. We then append any of those resulting values that don't start with "7878" but end with "0d0a" to the previous value, as this should repair the first and second halves that got split because it contained an extra "0d0a".
I provided two methods for the innermost if statement, one using regular expressions. The regex one is marginally slower in my testing, so I've left that one commented out.
I might still not have your full requirements, so you'll have to let me know if it works and perhaps provided your full dataset.
I think you are using a delimiter "0d0a" which also happens to be part of a content! Its not possible to avoid getting junk data as long as delimiter can also be part of content. Somehow delimiter must be unique.
Possible solutions.
Change the delimited to something else that doesn't occur as part of your data ( 000000, #!.;)
If you are definite about length of text that easy arrange item may have, use it. As per examples its not possible.
Solutions given in answers considering only sample data you have shared. If you are confidant about what will be the content of string, then these solutions given by others are pretty good to use. Otherwise these solutions wont assure you guarantee!
Best solution: Fix right delimiter then use regex or explode whatever you prefer.
Why don't you use preg_match_all instead? You can avoid all of the non-capturing groups (the look aheads, look behinds) in order to split the string (which without the non-capturing groups removes the matches), and just find the matches you're looking for:
Updated
<?php
$string = "00787817878110d0a22278780d0a78783330d0a00";
preg_match_all('/7878.*?0d0a(?=7878|[^(7878)]*?$)/', $string, $arr);
print_r($arr);
?>
Gives an array $arr[0] => ( [0] => 787817878110d0a22278780d0a, [1] => 78783330d0a ). Strips leading and trailing garbage characters (whatever doesn't start with 7878 or end with 7878 or 0d0a.
So $arr[0] would be the array of values that you are looking for.
See example on ideone
Works with multiple 7878 values and multiple 0d0a values (even though that's ridiculous).
Update
If splitting is more your style, why not avoid regular expressions altogether?
<?php
$string = "787817878110d0a22278780d0a78783330d0a";
$arr = explode('0d0a7878', $string);
$string = implode('0d0a,7878', $arr);
$arr = explode(',', $string);
print_r($arr);
?>
Here we split the string by the delimiter 0d0a7878, which is what #CharlieGorichanaz's solution is doing, and props to him for the quick, accurate solution. We then add a comma, because who doesn't love comma separated values? And we explode again on the commas for an array of desired values. Performance-wise, this ought to be faster than using regular expressions. See example.