If I had:
$string = "PascalCase";
I need
"pascal_case"
Does PHP offer a function for this purpose?
A shorter solution: Similar to the editor's one with a simplified regular expression and fixing the "trailing-underscore" problem:
$output = strtolower(preg_replace('/(?<!^)[A-Z]/', '_$0', $input));
PHP Demo |
Regex Demo
Note that cases like SimpleXML will be converted to simple_x_m_l using the above solution. That can also be considered a wrong usage of camel case notation (correct would be SimpleXml) rather than a bug of the algorithm since such cases are always ambiguous - even by grouping uppercase characters to one string (simple_xml) such algorithm will always fail in other edge cases like XMLHTMLConverter or one-letter words near abbreviations, etc. If you don't mind about the (rather rare) edge cases and want to handle SimpleXML correctly, you can use a little more complex solution:
$output = ltrim(strtolower(preg_replace('/[A-Z]([A-Z](?![a-z]))*/', '_$0', $input)), '_');
PHP Demo |
Regex Demo
Try this on for size:
$tests = array(
'simpleTest' => 'simple_test',
'easy' => 'easy',
'HTML' => 'html',
'simpleXML' => 'simple_xml',
'PDFLoad' => 'pdf_load',
'startMIDDLELast' => 'start_middle_last',
'AString' => 'a_string',
'Some4Numbers234' => 'some4_numbers234',
'TEST123String' => 'test123_string',
);
foreach ($tests as $test => $result) {
$output = from_camel_case($test);
if ($output === $result) {
echo "Pass: $test => $result\n";
} else {
echo "Fail: $test => $result [$output]\n";
}
}
function from_camel_case($input) {
preg_match_all('!([A-Z][A-Z0-9]*(?=$|[A-Z][a-z0-9])|[A-Za-z][a-z0-9]+)!', $input, $matches);
$ret = $matches[0];
foreach ($ret as &$match) {
$match = $match == strtoupper($match) ? strtolower($match) : lcfirst($match);
}
return implode('_', $ret);
}
Output:
Pass: simpleTest => simple_test
Pass: easy => easy
Pass: HTML => html
Pass: simpleXML => simple_xml
Pass: PDFLoad => pdf_load
Pass: startMIDDLELast => start_middle_last
Pass: AString => a_string
Pass: Some4Numbers234 => some4_numbers234
Pass: TEST123String => test123_string
This implements the following rules:
A sequence beginning with a lowercase letter must be followed by lowercase letters and digits;
A sequence beginning with an uppercase letter can be followed by either:
one or more uppercase letters and digits (followed by either the end of the string or an uppercase letter followed by a lowercase letter or digit ie the start of the next sequence); or
one or more lowercase letters or digits.
A concise solution and can handle some tricky use cases:
function decamelize($string) {
return strtolower(preg_replace(['/([a-z\d])([A-Z])/', '/([^_])([A-Z][a-z])/'], '$1_$2', $string));
}
Can handle all these cases:
simpleTest => simple_test
easy => easy
HTML => html
simpleXML => simple_xml
PDFLoad => pdf_load
startMIDDLELast => start_middle_last
AString => a_string
Some4Numbers234 => some4_numbers234
TEST123String => test123_string
hello_world => hello_world
hello__world => hello__world
_hello_world_ => _hello_world_
hello_World => hello_world
HelloWorld => hello_world
helloWorldFoo => hello_world_foo
hello-world => hello-world
myHTMLFiLe => my_html_fi_le
aBaBaB => a_ba_ba_b
BaBaBa => ba_ba_ba
libC => lib_c
You can test this function here: http://syframework.alwaysdata.net/decamelize
The Symfony Serializer Component has a CamelCaseToSnakeCaseNameConverter that has two methods normalize() and denormalize(). These can be used as follows:
$nameConverter = new CamelCaseToSnakeCaseNameConverter();
echo $nameConverter->normalize('camelCase');
// outputs: camel_case
echo $nameConverter->denormalize('snake_case');
// outputs: snakeCase
Ported from Ruby's String#camelize and String#decamelize.
function decamelize($word) {
return preg_replace(
'/(^|[a-z])([A-Z])/e',
'strtolower(strlen("\\1") ? "\\1_\\2" : "\\2")',
$word
);
}
function camelize($word) {
return preg_replace('/(^|_)([a-z])/e', 'strtoupper("\\2")', $word);
}
One trick the above solutions may have missed is the 'e' modifier which causes preg_replace to evaluate the replacement string as PHP code.
Most solutions here feel heavy handed. Here's what I use:
$underscored = strtolower(
preg_replace(
["/([A-Z]+)/", "/_([A-Z]+)([A-Z][a-z])/"],
["_$1", "_$1_$2"],
lcfirst($camelCase)
)
);
"CamelCASE" is converted to "camel_case"
lcfirst($camelCase) will lower the first character (avoids 'CamelCASE' converted output to start with an underscore)
[A-Z] finds capital letters
+ will treat every consecutive uppercase as a word (avoids 'CamelCASE' to be converted to camel_C_A_S_E)
Second pattern and replacement are for ThoseSPECCases -> those_spec_cases instead of those_speccases
strtolower([…]) turns the output to lowercases
php does not offer a built in function for this afaik, but here is what I use
function uncamelize($camel,$splitter="_") {
$camel=preg_replace('/(?!^)[[:upper:]][[:lower:]]/', '$0', preg_replace('/(?!^)[[:upper:]]+/', $splitter.'$0', $camel));
return strtolower($camel);
}
the splitter can be specified in the function call, so you can call it like so
$camelized="thisStringIsCamelized";
echo uncamelize($camelized,"_");
//echoes "this_string_is_camelized"
echo uncamelize($camelized,"-");
//echoes "this-string-is-camelized"
I had a similar problem but couldn't find any answer that satisfies how to convert CamelCase to snake_case, while avoiding duplicate or redundant underscores _ for names with underscores, or all caps abbreviations.
Th problem is as follows:
CamelCaseClass => camel_case_class
ClassName_WithUnderscores => class_name_with_underscore
FAQ => faq
The solution I wrote is a simple two functions call, lowercase and search and replace for consecutive lowercase-uppercase letters:
strtolower(preg_replace("/([a-z])([A-Z])/", "$1_$2", $name));
"CamelCase" to "camel_case":
function camelToSnake($camel)
{
$snake = preg_replace('/[A-Z]/', '_$0', $camel);
$snake = strtolower($snake);
$snake = ltrim($snake, '_');
return $snake;
}
or:
function camelToSnake($camel)
{
$snake = preg_replace_callback('/[A-Z]/', function ($match){
return '_' . strtolower($match[0]);
}, $camel);
return ltrim($snake, '_');
}
If you are looking for a PHP 5.4 version and later answer here is the code:
function decamelize($word) {
return $word = preg_replace_callback(
"/(^|[a-z])([A-Z])/",
function($m) { return strtolower(strlen($m[1]) ? "$m[1]_$m[2]" : "$m[2]"); },
$word
);
}
function camelize($word) {
return $word = preg_replace_callback(
"/(^|_)([a-z])/",
function($m) { return strtoupper("$m[2]"); },
$word
);
}
You need to run a regex through it that matches every uppercase letter except if it is in the beginning and replace it with underscrore plus that letter. An utf-8 solution is this:
header('content-type: text/html; charset=utf-8');
$separated = preg_replace('%(?<!^)\p{Lu}%usD', '_$0', 'AaaaBbbbCcccDdddÁáááŐőőő');
$lower = mb_strtolower($separated, 'utf-8');
echo $lower; //aaaa_bbbb_cccc_dddd_áááá_őőőő
If you are not sure what case your string is, better to check it first, because this code assumes that the input is camelCase instead of underscore_Case or dash-Case, so if the latters have uppercase letters, it will add underscores to them.
The accepted answer from cletus is way too overcomplicated imho and it works only with latin characters. I find it a really bad solution and wonder why it was accepted at all. Converting TEST123String into test123_string is not necessarily a valid requirement. I rather kept it simple and separated ABCccc into a_b_cccc instead of ab_cccc because it does not lose information this way and the backward conversion will give the exact same string we started with. Even if you want to do it the other way it is relative easy to write a regex for it with positive lookbehind (?<!^)\p{Lu}\p{Ll}|(?<=\p{Ll})\p{Lu} or two regexes without lookbehind if you are not a regex expert. There is no need to split it up into substrings not to mention deciding between strtolower and lcfirst where using just strtolower would be completely fine.
Short solution:
$subject = "PascalCase";
echo strtolower(preg_replace('/\B([A-Z])/', '_$1', $subject));
Not fancy at all but simple and speedy as hell:
function uncamelize($str)
{
$str = lcfirst($str);
$lc = strtolower($str);
$result = '';
$length = strlen($str);
for ($i = 0; $i < $length; $i++) {
$result .= ($str[$i] == $lc[$i] ? '' : '_') . $lc[$i];
}
return $result;
}
echo uncamelize('HelloAWorld'); //hello_a_world
A version that doesn't use regex can be found in the Alchitect source:
decamelize($str, $glue='_')
{
$counter = 0;
$uc_chars = '';
$new_str = array();
$str_len = strlen($str);
for ($x=0; $x<$str_len; ++$x)
{
$ascii_val = ord($str[$x]);
if ($ascii_val >= 65 && $ascii_val <= 90)
{
$uc_chars .= $str[$x];
}
}
$tok = strtok($str, $uc_chars);
while ($tok !== false)
{
$new_char = chr(ord($uc_chars[$counter]) + 32);
$new_str[] = $new_char . $tok;
$tok = strtok($uc_chars);
++$counter;
}
return implode($new_str, $glue);
}
So here is a one-liner:
strtolower(preg_replace('/(?|([a-z\d])([A-Z])|([^\^])([A-Z][a-z]))/', '$1_$2', $string));
danielstjules/Stringy provieds a method to convert string from camelcase to snakecase.
s('TestUCase')->underscored(); // 'test_u_case'
Laravel 5.6 provides a very simple way of doing this:
/**
* Convert a string to snake case.
*
* #param string $value
* #param string $delimiter
* #return string
*/
public static function snake($value, $delimiter = '_'): string
{
if (!ctype_lower($value)) {
$value = strtolower(preg_replace('/(.)(?=[A-Z])/u', '$1'.$delimiter, $value));
}
return $value;
}
What it does: if it sees that there is at least one capital letter in the given string, it uses a positive lookahead to search for any character (.) followed by a capital letter ((?=[A-Z])). It then replaces the found character with it's value followed by the separactor _.
If you are not using Composer for PHP you are wasting your time.
composer require doctrine/inflector
use Doctrine\Inflector\InflectorFactory;
// Couple ways to get class name:
// If inside a parent class
$class_name = get_called_class();
// Or just inside the class
$class_name = get_class();
// Or straight get a class name
$class_name = MyCustomClass::class;
// Or, of course, a string
$class_name = 'App\Libs\MyCustomClass';
// Take the name down to the base name:
$class_name = end(explode('\\', $class_name)));
$inflector = InflectorFactory::create()->build();
$inflector->tableize($class_name); // my_custom_class
https://github.com/doctrine/inflector/blob/master/docs/en/index.rst
Use Symfony String
composer require symfony/string
use function Symfony\Component\String\u;
u($string)->snake()->toString()
The direct port from rails (minus their special handling for :: or acronyms) would be
function underscore($word){
$word = preg_replace('#([A-Z\d]+)([A-Z][a-z])#','\1_\2', $word);
$word = preg_replace('#([a-z\d])([A-Z])#', '\1_\2', $word);
return strtolower(strtr($word, '-', '_'));
}
Knowing PHP, this will be faster than the manual parsing that's happening in other answers given here. The disadvantage is that you don't get to chose what to use as a separator between words, but that wasn't part of the question.
Also check the relevant rails source code
Note that this is intended for use with ASCII identifiers. If you need to do this with characters outside of the ASCII range, use the '/u' modifier for preg_matchand use mb_strtolower.
Here is my contribution to a six-year-old question with god knows how many answers...
It will convert all words in the provided string that are in camelcase to snakecase. For example "SuperSpecialAwesome and also FizBuzz καιΚάτιΑκόμα" will be converted to "super_special_awesome and also fizz_buzz και_κάτι_ακόμα".
mb_strtolower(
preg_replace_callback(
'/(?<!\b|_)\p{Lu}/u',
function ($a) {
return "_$a[0]";
},
'SuperSpecialAwesome'
)
);
Yii2 have the different function to make the word snake_case from CamelCase.
/**
* Converts any "CamelCased" into an "underscored_word".
* #param string $words the word(s) to underscore
* #return string
*/
public static function underscore($words)
{
return strtolower(preg_replace('/(?<=\\w)([A-Z])/', '_\\1', $words));
}
This is one of shorter ways:
function camel_to_snake($input)
{
return strtolower(ltrim(preg_replace('/([A-Z])/', '_\\1', $input), '_'));
}
function camel2snake($name) {
$str_arr = str_split($name);
foreach ($str_arr as $k => &$v) {
if (ord($v) >= 64 && ord($v) <= 90) { // A = 64; Z = 90
$v = strtolower($v);
$v = ($k != 0) ? '_'.$v : $v;
}
}
return implode('', $str_arr);
}
The worst answer on here was so close to being the best(use a framework). NO DON'T, just take a look at the source code. seeing what a well established framework uses would be a far more reliable approach(tried and tested). The Zend framework has some word filters which fit your needs. Source.
here is a couple of methods I adapted from the source.
function CamelCaseToSeparator($value,$separator = ' ')
{
if (!is_scalar($value) && !is_array($value)) {
return $value;
}
if (defined('PREG_BAD_UTF8_OFFSET_ERROR') && preg_match('/\pL/u', 'a') == 1) {
$pattern = ['#(?<=(?:\p{Lu}))(\p{Lu}\p{Ll})#', '#(?<=(?:\p{Ll}|\p{Nd}))(\p{Lu})#'];
$replacement = [$separator . '\1', $separator . '\1'];
} else {
$pattern = ['#(?<=(?:[A-Z]))([A-Z]+)([A-Z][a-z])#', '#(?<=(?:[a-z0-9]))([A-Z])#'];
$replacement = ['\1' . $separator . '\2', $separator . '\1'];
}
return preg_replace($pattern, $replacement, $value);
}
function CamelCaseToUnderscore($value){
return CamelCaseToSeparator($value,'_');
}
function CamelCaseToDash($value){
return CamelCaseToSeparator($value,'-');
}
$string = CamelCaseToUnderscore("CamelCase");
There is a library providing this functionality:
SnakeCaseFormatter::run('CamelCase'); // Output: "camel_case"
If you use Laravel framework, you can use just snake_case() method.
How to de-camelize without using regex:
function decamelize($str, $glue = '_') {
$capitals = [];
$replace = [];
foreach(str_split($str) as $index => $char) {
if(!ctype_upper($char)) {
continue;
}
$capitals[] = $char;
$replace[] = ($index > 0 ? $glue : '') . strtolower($char);
}
if(count($capitals) > 0) {
return str_replace($capitals, $replace, $str);
}
return $str;
}
An edit:
How would I do that in 2019:
PHP 7.3 and before:
function toSnakeCase($str, $glue = '_') {
return ltrim(
preg_replace_callback('/[A-Z]/', function ($matches) use ($glue) {
return $glue . strtolower($matches[0]);
}, $str),
$glue
);
}
And with PHP 7.4+:
function toSnakeCase($str, $glue = '_') {
return ltrim(preg_replace_callback('/[A-Z]/', fn($matches) => $glue . strtolower($matches[0]), $str), $glue);
}
If you're using the Laravel framework, a simpler built-in method exists:
$converted = Str::snake('fooBar'); // -> foo_bar
See documentation here:
https://laravel.com/docs/9.x/helpers#method-snake-case
The open source TurboCommons library contains a general purpose formatCase() method inside the StringUtils class, which lets you convert a string to lots of common case formats, like CamelCase, UpperCamelCase, LowerCamelCase, snake_case, Title Case, and many more.
https://github.com/edertone/TurboCommons
To use it, import the phar file to your project and:
use org\turbocommons\src\main\php\utils\StringUtils;
echo StringUtils::formatCase('camelCase', StringUtils::FORMAT_SNAKE_CASE);
// will output 'camel_Case'
Related
I'm looking for a way to replace all but first occurrences of a group or some character.
For example a following random string:
+Z1A124B555ND124AB+A555
1,5,2,4,A,B and + are repeating through out the string.
124, 555 are groups of characters that are also reoccurring.
Now, let's say I want to remove every but first occurrence of 555, A and B.
What regex would be appropriate? I could think of an example replacing all:
preg_replace('/555|A|B/','',$string);
Something like ^ that, but I want to keep the first occurrence... Any ideas?
Are your strings always delimited by plus signs? Do 555, A, and B always occur in the first "group" (delimited by +)?
If so, you can split, replace and then join:
$input = '+Z1A124B555+A124AB+A555';
$array = explode('+', $input, 3); // max 3 elements
$array[2] = str_replace(array('555', 'A', 'B'), '', $array[2]);
$output = implode('+', $array);
ps. No need to use regexes, when we can use a simple str_replace
Use the preg_replace_callback function:
$replaced = array('555' => 0, 'A' => 0, 'B' => 0);
$input = '+Z1A124B555+A124AB+A555';
$output = preg_replace_callback('/555|[AB]/', function($matches) {
static $replaced = 0;
if($replaced++ == 0) return $matches[0];
return '';
}, $input);
This solution could be modified to do what you want: PHP: preg_replace (x) occurrence?
Here is a modified solution for you:
<?php
class Parser {
private $i;
public function parse($source) {
$this->i=array();
return preg_replace_callback('/555|A|B/', array($this, 'on_match'), $source);
}
private function on_match($m) {
$first=$m[0];
if(!isset($this->i[$first]))
{
echo "I'm HERE";
$this->i[$first]=1;
}
else
{
$this->i[$first]++;
}
// Return what you want the replacement to be.
if($this->i[$first]>1)
{
$result="";
}
else
{
$result=$m[0];
}
return $result;
}
}
$sample = '+Z1A124B555ND124AB+A555';
$parse = new Parser();
$result = $parse->parse($sample);
echo "Result is: [$result]\n";
?>
A more generic function that works with every pattern.
function replaceAllButFirst($pattern, $replacement, $subject) {
return preg_replace_callback($pattern,
function($matches) use ($replacement, $subject) {
static $s;
$s++;
return ($s <= 1) ? $matches[0] : $replacement;
},
$subject
);
}
I have a PHP array of about 20,000 names, I need to filter through it and remove any name that has the word job, freelance, or project in the name.
Below is what I have started so far, it will cycle through the array and add the cleaned item to build a new clean array. I need help matching the "bad" words though. Please help if you can
$data1 = array('Phillyfreelance' , 'PhillyWebJobs', 'web2project', 'cleanname');
// freelance
// job
// project
$cleanArray = array();
foreach ($data1 as $name) {
# if a term is matched, we remove it from our array
if(preg_match('~\b(freelance|job|project)\b~i',$name)){
echo 'word removed';
}else{
$cleanArray[] = $name;
}
}
Right now it matches a word so if "freelance" is a name in the array it removes that item but if it is something like ImaFreelaner then it does not, I need to remove anything that has the matching words in it at all
A regular expression is not really necessary here — it'd likely be faster to use a few stripos calls. (Performance matters on this level because the search occurs for each of the 20,000 names.)
With array_filter, which only keeps elements in the array for which the callback returns true:
$data1 = array_filter($data1, function($el) {
return stripos($el, 'job') === FALSE
&& stripos($el, 'freelance') === FALSE
&& stripos($el, 'project') === FALSE;
});
Here's a more extensible / maintainable version, where the list of bad words can be loaded from an array rather than having to be explicitly denoted in the code:
$data1 = array_filter($data1, function($el) {
$bad_words = array('job', 'freelance', 'project');
$word_okay = true;
foreach ( $bad_words as $bad_word ) {
if ( stripos($el, $bad_word) !== FALSE ) {
$word_okay = false;
break;
}
}
return $word_okay;
});
I'd be inclined to use the array_filter function and change the regex to not match on word boundaries
$data1 = array('Phillyfreelance' , 'PhillyWebJobs', 'web2project', 'cleanname');
$cleanArray = array_filter($data1, function($w) {
return !preg_match('~(freelance|project|job)~i', $w);
});
Use of the preg_match() function and some regular expressions should do the trick; this is what I came up with and it worked fine on my end:
<?php
$data1=array('JoomlaFreelance','PhillyWebJobs','web2project','cleanname');
$cleanArray=array();
$badWords='/(job|freelance|project)/i';
foreach($data1 as $name) {
if(!preg_match($badWords,$name)) {
$cleanArray[]=$name;
}
}
echo(implode($cleanArray,','));
?>
Which returned:
cleanname
Personally, I would do something like this:
$badWords = ['job', 'freelance', 'project'];
$names = ['JoomlaFreelance', 'PhillyWebJobs', 'web2project', 'cleanname'];
// Escape characters with special meaning in regular expressions.
$quotedBadWords = array_map(function($word) {
return preg_quote($word, '/');
}, $badWords);
// Create the regular expression.
$badWordsRegex = implode('|', $quotedBadWords);
// Filter out any names that match the bad words.
$cleanNames = array_filter($names, function($name) use ($badWordsRegex) {
return preg_match('/' . $badWordsRegex . '/i', $name) === FALSE;
});
This should be what you want:
if (!preg_match('/(freelance|job|project)/i', $name)) {
$cleanArray[] = $name;
}
I have to set some routing rules in my php application, and they should be in the form
/%var/something/else/%another_var
In other words i beed a regex that returns me every URI piece marked by the % character, String marked by % represent var names so they can be almost every string.
another example:
from /%lang/module/controller/action/%var_1
i want the regex to extract lang and var_1
i tried something like
/.*%(.*)[\/$]/
but it doesn't work.....
Seeing as it's routing rules, and you may need all the pieces at some point, you could also split the string the classical way:
$path_exploded = explode("/", $path);
foreach ($path_exploded as $fragment) if ($fragment[0] == "%")
echo "Found $fragment";
$str='/%var/something/else/%another_var';
$s = explode("/",$str);
$whatiwant = preg_grep("/^%/",$s);
print_r($whatiwant);
I don’t see the need to slow down your script with a regex … trim() and explode() do everything you need:
function extract_url_vars($url)
{
if ( FALSE === strpos($url, '%') )
{
return $url;
}
$found = array();
$parts = explode('/%', trim($url, '/') );
foreach ( $parts as $part )
{
$tmp = explode('/', $part);
$found[] = ltrim( array_shift($tmp), '%');
}
return $found;
}
// Test
print_r( extract_url_vars('/%lang/module/controller/action/%var_1') );
// Result:
Array
(
[0] => lang
[1] => var_1
)
You can use:
$str = '/%lang/module/controller/action/%var_1';
if(preg_match('#/%(.*?)/[^%]*%(.*?)$#',$str,$matches)) {
echo "$matches[1] $matches[2]\n"; // prints lang var_1
}
If I had:
$string = "PascalCase";
I need
"pascal_case"
Does PHP offer a function for this purpose?
A shorter solution: Similar to the editor's one with a simplified regular expression and fixing the "trailing-underscore" problem:
$output = strtolower(preg_replace('/(?<!^)[A-Z]/', '_$0', $input));
PHP Demo |
Regex Demo
Note that cases like SimpleXML will be converted to simple_x_m_l using the above solution. That can also be considered a wrong usage of camel case notation (correct would be SimpleXml) rather than a bug of the algorithm since such cases are always ambiguous - even by grouping uppercase characters to one string (simple_xml) such algorithm will always fail in other edge cases like XMLHTMLConverter or one-letter words near abbreviations, etc. If you don't mind about the (rather rare) edge cases and want to handle SimpleXML correctly, you can use a little more complex solution:
$output = ltrim(strtolower(preg_replace('/[A-Z]([A-Z](?![a-z]))*/', '_$0', $input)), '_');
PHP Demo |
Regex Demo
Try this on for size:
$tests = array(
'simpleTest' => 'simple_test',
'easy' => 'easy',
'HTML' => 'html',
'simpleXML' => 'simple_xml',
'PDFLoad' => 'pdf_load',
'startMIDDLELast' => 'start_middle_last',
'AString' => 'a_string',
'Some4Numbers234' => 'some4_numbers234',
'TEST123String' => 'test123_string',
);
foreach ($tests as $test => $result) {
$output = from_camel_case($test);
if ($output === $result) {
echo "Pass: $test => $result\n";
} else {
echo "Fail: $test => $result [$output]\n";
}
}
function from_camel_case($input) {
preg_match_all('!([A-Z][A-Z0-9]*(?=$|[A-Z][a-z0-9])|[A-Za-z][a-z0-9]+)!', $input, $matches);
$ret = $matches[0];
foreach ($ret as &$match) {
$match = $match == strtoupper($match) ? strtolower($match) : lcfirst($match);
}
return implode('_', $ret);
}
Output:
Pass: simpleTest => simple_test
Pass: easy => easy
Pass: HTML => html
Pass: simpleXML => simple_xml
Pass: PDFLoad => pdf_load
Pass: startMIDDLELast => start_middle_last
Pass: AString => a_string
Pass: Some4Numbers234 => some4_numbers234
Pass: TEST123String => test123_string
This implements the following rules:
A sequence beginning with a lowercase letter must be followed by lowercase letters and digits;
A sequence beginning with an uppercase letter can be followed by either:
one or more uppercase letters and digits (followed by either the end of the string or an uppercase letter followed by a lowercase letter or digit ie the start of the next sequence); or
one or more lowercase letters or digits.
A concise solution and can handle some tricky use cases:
function decamelize($string) {
return strtolower(preg_replace(['/([a-z\d])([A-Z])/', '/([^_])([A-Z][a-z])/'], '$1_$2', $string));
}
Can handle all these cases:
simpleTest => simple_test
easy => easy
HTML => html
simpleXML => simple_xml
PDFLoad => pdf_load
startMIDDLELast => start_middle_last
AString => a_string
Some4Numbers234 => some4_numbers234
TEST123String => test123_string
hello_world => hello_world
hello__world => hello__world
_hello_world_ => _hello_world_
hello_World => hello_world
HelloWorld => hello_world
helloWorldFoo => hello_world_foo
hello-world => hello-world
myHTMLFiLe => my_html_fi_le
aBaBaB => a_ba_ba_b
BaBaBa => ba_ba_ba
libC => lib_c
You can test this function here: http://syframework.alwaysdata.net/decamelize
The Symfony Serializer Component has a CamelCaseToSnakeCaseNameConverter that has two methods normalize() and denormalize(). These can be used as follows:
$nameConverter = new CamelCaseToSnakeCaseNameConverter();
echo $nameConverter->normalize('camelCase');
// outputs: camel_case
echo $nameConverter->denormalize('snake_case');
// outputs: snakeCase
Ported from Ruby's String#camelize and String#decamelize.
function decamelize($word) {
return preg_replace(
'/(^|[a-z])([A-Z])/e',
'strtolower(strlen("\\1") ? "\\1_\\2" : "\\2")',
$word
);
}
function camelize($word) {
return preg_replace('/(^|_)([a-z])/e', 'strtoupper("\\2")', $word);
}
One trick the above solutions may have missed is the 'e' modifier which causes preg_replace to evaluate the replacement string as PHP code.
Most solutions here feel heavy handed. Here's what I use:
$underscored = strtolower(
preg_replace(
["/([A-Z]+)/", "/_([A-Z]+)([A-Z][a-z])/"],
["_$1", "_$1_$2"],
lcfirst($camelCase)
)
);
"CamelCASE" is converted to "camel_case"
lcfirst($camelCase) will lower the first character (avoids 'CamelCASE' converted output to start with an underscore)
[A-Z] finds capital letters
+ will treat every consecutive uppercase as a word (avoids 'CamelCASE' to be converted to camel_C_A_S_E)
Second pattern and replacement are for ThoseSPECCases -> those_spec_cases instead of those_speccases
strtolower([…]) turns the output to lowercases
php does not offer a built in function for this afaik, but here is what I use
function uncamelize($camel,$splitter="_") {
$camel=preg_replace('/(?!^)[[:upper:]][[:lower:]]/', '$0', preg_replace('/(?!^)[[:upper:]]+/', $splitter.'$0', $camel));
return strtolower($camel);
}
the splitter can be specified in the function call, so you can call it like so
$camelized="thisStringIsCamelized";
echo uncamelize($camelized,"_");
//echoes "this_string_is_camelized"
echo uncamelize($camelized,"-");
//echoes "this-string-is-camelized"
I had a similar problem but couldn't find any answer that satisfies how to convert CamelCase to snake_case, while avoiding duplicate or redundant underscores _ for names with underscores, or all caps abbreviations.
Th problem is as follows:
CamelCaseClass => camel_case_class
ClassName_WithUnderscores => class_name_with_underscore
FAQ => faq
The solution I wrote is a simple two functions call, lowercase and search and replace for consecutive lowercase-uppercase letters:
strtolower(preg_replace("/([a-z])([A-Z])/", "$1_$2", $name));
"CamelCase" to "camel_case":
function camelToSnake($camel)
{
$snake = preg_replace('/[A-Z]/', '_$0', $camel);
$snake = strtolower($snake);
$snake = ltrim($snake, '_');
return $snake;
}
or:
function camelToSnake($camel)
{
$snake = preg_replace_callback('/[A-Z]/', function ($match){
return '_' . strtolower($match[0]);
}, $camel);
return ltrim($snake, '_');
}
If you are looking for a PHP 5.4 version and later answer here is the code:
function decamelize($word) {
return $word = preg_replace_callback(
"/(^|[a-z])([A-Z])/",
function($m) { return strtolower(strlen($m[1]) ? "$m[1]_$m[2]" : "$m[2]"); },
$word
);
}
function camelize($word) {
return $word = preg_replace_callback(
"/(^|_)([a-z])/",
function($m) { return strtoupper("$m[2]"); },
$word
);
}
You need to run a regex through it that matches every uppercase letter except if it is in the beginning and replace it with underscrore plus that letter. An utf-8 solution is this:
header('content-type: text/html; charset=utf-8');
$separated = preg_replace('%(?<!^)\p{Lu}%usD', '_$0', 'AaaaBbbbCcccDdddÁáááŐőőő');
$lower = mb_strtolower($separated, 'utf-8');
echo $lower; //aaaa_bbbb_cccc_dddd_áááá_őőőő
If you are not sure what case your string is, better to check it first, because this code assumes that the input is camelCase instead of underscore_Case or dash-Case, so if the latters have uppercase letters, it will add underscores to them.
The accepted answer from cletus is way too overcomplicated imho and it works only with latin characters. I find it a really bad solution and wonder why it was accepted at all. Converting TEST123String into test123_string is not necessarily a valid requirement. I rather kept it simple and separated ABCccc into a_b_cccc instead of ab_cccc because it does not lose information this way and the backward conversion will give the exact same string we started with. Even if you want to do it the other way it is relative easy to write a regex for it with positive lookbehind (?<!^)\p{Lu}\p{Ll}|(?<=\p{Ll})\p{Lu} or two regexes without lookbehind if you are not a regex expert. There is no need to split it up into substrings not to mention deciding between strtolower and lcfirst where using just strtolower would be completely fine.
Short solution:
$subject = "PascalCase";
echo strtolower(preg_replace('/\B([A-Z])/', '_$1', $subject));
Not fancy at all but simple and speedy as hell:
function uncamelize($str)
{
$str = lcfirst($str);
$lc = strtolower($str);
$result = '';
$length = strlen($str);
for ($i = 0; $i < $length; $i++) {
$result .= ($str[$i] == $lc[$i] ? '' : '_') . $lc[$i];
}
return $result;
}
echo uncamelize('HelloAWorld'); //hello_a_world
A version that doesn't use regex can be found in the Alchitect source:
decamelize($str, $glue='_')
{
$counter = 0;
$uc_chars = '';
$new_str = array();
$str_len = strlen($str);
for ($x=0; $x<$str_len; ++$x)
{
$ascii_val = ord($str[$x]);
if ($ascii_val >= 65 && $ascii_val <= 90)
{
$uc_chars .= $str[$x];
}
}
$tok = strtok($str, $uc_chars);
while ($tok !== false)
{
$new_char = chr(ord($uc_chars[$counter]) + 32);
$new_str[] = $new_char . $tok;
$tok = strtok($uc_chars);
++$counter;
}
return implode($new_str, $glue);
}
So here is a one-liner:
strtolower(preg_replace('/(?|([a-z\d])([A-Z])|([^\^])([A-Z][a-z]))/', '$1_$2', $string));
danielstjules/Stringy provieds a method to convert string from camelcase to snakecase.
s('TestUCase')->underscored(); // 'test_u_case'
Laravel 5.6 provides a very simple way of doing this:
/**
* Convert a string to snake case.
*
* #param string $value
* #param string $delimiter
* #return string
*/
public static function snake($value, $delimiter = '_'): string
{
if (!ctype_lower($value)) {
$value = strtolower(preg_replace('/(.)(?=[A-Z])/u', '$1'.$delimiter, $value));
}
return $value;
}
What it does: if it sees that there is at least one capital letter in the given string, it uses a positive lookahead to search for any character (.) followed by a capital letter ((?=[A-Z])). It then replaces the found character with it's value followed by the separactor _.
If you are not using Composer for PHP you are wasting your time.
composer require doctrine/inflector
use Doctrine\Inflector\InflectorFactory;
// Couple ways to get class name:
// If inside a parent class
$class_name = get_called_class();
// Or just inside the class
$class_name = get_class();
// Or straight get a class name
$class_name = MyCustomClass::class;
// Or, of course, a string
$class_name = 'App\Libs\MyCustomClass';
// Take the name down to the base name:
$class_name = end(explode('\\', $class_name)));
$inflector = InflectorFactory::create()->build();
$inflector->tableize($class_name); // my_custom_class
https://github.com/doctrine/inflector/blob/master/docs/en/index.rst
Use Symfony String
composer require symfony/string
use function Symfony\Component\String\u;
u($string)->snake()->toString()
The direct port from rails (minus their special handling for :: or acronyms) would be
function underscore($word){
$word = preg_replace('#([A-Z\d]+)([A-Z][a-z])#','\1_\2', $word);
$word = preg_replace('#([a-z\d])([A-Z])#', '\1_\2', $word);
return strtolower(strtr($word, '-', '_'));
}
Knowing PHP, this will be faster than the manual parsing that's happening in other answers given here. The disadvantage is that you don't get to chose what to use as a separator between words, but that wasn't part of the question.
Also check the relevant rails source code
Note that this is intended for use with ASCII identifiers. If you need to do this with characters outside of the ASCII range, use the '/u' modifier for preg_matchand use mb_strtolower.
Here is my contribution to a six-year-old question with god knows how many answers...
It will convert all words in the provided string that are in camelcase to snakecase. For example "SuperSpecialAwesome and also FizBuzz καιΚάτιΑκόμα" will be converted to "super_special_awesome and also fizz_buzz και_κάτι_ακόμα".
mb_strtolower(
preg_replace_callback(
'/(?<!\b|_)\p{Lu}/u',
function ($a) {
return "_$a[0]";
},
'SuperSpecialAwesome'
)
);
Yii2 have the different function to make the word snake_case from CamelCase.
/**
* Converts any "CamelCased" into an "underscored_word".
* #param string $words the word(s) to underscore
* #return string
*/
public static function underscore($words)
{
return strtolower(preg_replace('/(?<=\\w)([A-Z])/', '_\\1', $words));
}
This is one of shorter ways:
function camel_to_snake($input)
{
return strtolower(ltrim(preg_replace('/([A-Z])/', '_\\1', $input), '_'));
}
function camel2snake($name) {
$str_arr = str_split($name);
foreach ($str_arr as $k => &$v) {
if (ord($v) >= 64 && ord($v) <= 90) { // A = 64; Z = 90
$v = strtolower($v);
$v = ($k != 0) ? '_'.$v : $v;
}
}
return implode('', $str_arr);
}
The worst answer on here was so close to being the best(use a framework). NO DON'T, just take a look at the source code. seeing what a well established framework uses would be a far more reliable approach(tried and tested). The Zend framework has some word filters which fit your needs. Source.
here is a couple of methods I adapted from the source.
function CamelCaseToSeparator($value,$separator = ' ')
{
if (!is_scalar($value) && !is_array($value)) {
return $value;
}
if (defined('PREG_BAD_UTF8_OFFSET_ERROR') && preg_match('/\pL/u', 'a') == 1) {
$pattern = ['#(?<=(?:\p{Lu}))(\p{Lu}\p{Ll})#', '#(?<=(?:\p{Ll}|\p{Nd}))(\p{Lu})#'];
$replacement = [$separator . '\1', $separator . '\1'];
} else {
$pattern = ['#(?<=(?:[A-Z]))([A-Z]+)([A-Z][a-z])#', '#(?<=(?:[a-z0-9]))([A-Z])#'];
$replacement = ['\1' . $separator . '\2', $separator . '\1'];
}
return preg_replace($pattern, $replacement, $value);
}
function CamelCaseToUnderscore($value){
return CamelCaseToSeparator($value,'_');
}
function CamelCaseToDash($value){
return CamelCaseToSeparator($value,'-');
}
$string = CamelCaseToUnderscore("CamelCase");
There is a library providing this functionality:
SnakeCaseFormatter::run('CamelCase'); // Output: "camel_case"
If you use Laravel framework, you can use just snake_case() method.
How to de-camelize without using regex:
function decamelize($str, $glue = '_') {
$capitals = [];
$replace = [];
foreach(str_split($str) as $index => $char) {
if(!ctype_upper($char)) {
continue;
}
$capitals[] = $char;
$replace[] = ($index > 0 ? $glue : '') . strtolower($char);
}
if(count($capitals) > 0) {
return str_replace($capitals, $replace, $str);
}
return $str;
}
An edit:
How would I do that in 2019:
PHP 7.3 and before:
function toSnakeCase($str, $glue = '_') {
return ltrim(
preg_replace_callback('/[A-Z]/', function ($matches) use ($glue) {
return $glue . strtolower($matches[0]);
}, $str),
$glue
);
}
And with PHP 7.4+:
function toSnakeCase($str, $glue = '_') {
return ltrim(preg_replace_callback('/[A-Z]/', fn($matches) => $glue . strtolower($matches[0]), $str), $glue);
}
If you're using the Laravel framework, a simpler built-in method exists:
$converted = Str::snake('fooBar'); // -> foo_bar
See documentation here:
https://laravel.com/docs/9.x/helpers#method-snake-case
The open source TurboCommons library contains a general purpose formatCase() method inside the StringUtils class, which lets you convert a string to lots of common case formats, like CamelCase, UpperCamelCase, LowerCamelCase, snake_case, Title Case, and many more.
https://github.com/edertone/TurboCommons
To use it, import the phar file to your project and:
use org\turbocommons\src\main\php\utils\StringUtils;
echo StringUtils::formatCase('camelCase', StringUtils::FORMAT_SNAKE_CASE);
// will output 'camel_Case'
I've the following method which allows me to protect MySQL entities:
public function Tick($string)
{
$string = explode('.', str_replace('`', '', $string));
foreach ($string as $key => $value)
{
if ($value != '*')
{
$string[$key] = '`' . trim($value) . '`';
}
}
return implode('.', $string);
}
This works fairly well for the use that I make of it.
It protects database, table, field names and even the * operator, however now I also want it to protect function calls, ie:
AVG(database.employees.salary)
Should become:
AVG(`database`.`employees`.`salary`) and not `AVG(database`.`employees`.`salary)`
How should I go about this? Should I use regular expressions?
Also, how can I support more advanced stuff, from:
MAX(AVG(database.table.field1), MAX(database.table.field2))
To:
MAX(AVG(`database`.`table`.`field1`), MAX(`database`.`table`.`field2`))
Please keep in mind that I want to keep this method as simple/fast as possible, since it pretty much iterates over all the entity names in my database.
If this is quoting parts of an SQL statement, and they have only complexity that you descibe, a RegEx is a great approach. On the other hand, if you need to do this to full SQL statements, or simply more complicated components of statements (such as "MAX(AVG(val),MAX(val2))"), you will need to tokenize or parse the string and have a more sophisticated understanding of it to do this quoting accurately.
Given the regular expression approach, you may find it easier to break the function name out as one step, and then use your current code to quote the database/table/column names. This can be done in one RE, but it will be tricker to get right.
Either way, I'd highly recommend writing a few unit test cases. In fact, this is an ideal situation for this approach: it's easy to write the tests, you have some existing cases that work (which you don't want to break), and you have just one more case to add.
Your test can start as simply as:
assert '`ticked`' == Tick('ticked');
assert '`table`.`ticked`' == Tick('table.ticked');
assert 'db`.`table`.`ticked`' == Tick('db.table.ticked');
And then add:
assert 'FN(`ticked`)' == Tick('FN(ticked)');
etc.
Using the test case ndp gave I created a regex to do the hard work for you. The following regex will replace all word boundaries around words that are not followed by an opening parenthesis.
\b(\w+)\b(?!\()
The Tick() functionality would then be implemented in PHP as follows:
function Tick($string)
{
return preg_replace( '/\b(\w+)\b(?!\()/', '`\1`', $string );
}
It's generally a bad idea to pass the whole SQL to the function. That way, you'll always find a case when it doesn't work, unless you fully parse the SQL syntax.
Put the ticks to the names on some previous abstraction level, which makes up the SQL.
Before you explode your string on periods, check if the last character is a parenthesis. If so, this call is a function.
<?php
$string = str_replace('`', '', $string)
$function = "";
if (substr($string,-1) == ")") {
// Strip off function call first
$opening = strpos($string, "(");
$function = substr($string, 0, $opening+1);
$string = substr($string, $opening+1, -1);
}
// Do your existing parsing to $string
if ($function == "") {
// Put function back on string
$string = $function . $string . ")";
}
?>
If you need to cover more advanced situations, like using nested functions, or multiple functions in sequence in one "$string" variable, this would become a much more advanced function, and you'd best ask yourself why these elements aren't being properly ticked in the first place, and not need any further parsing.
EDIT: Updating for nested functions, as per original post edit
To have the above function deal with multiple nested functions, you likely need something that will 'unwrap' your nested functions. I haven't tested this, but the following function might get you on the right track.
<?php
function unwrap($str) {
$pos = strpos($str, "(");
if ($pos === false) return $str; // There's no function call here
$last_close = 0;
$cur_offset = 0; // Start at the beginning
while ($cur_offset <= strlen($str)) {
$first_close = strpos($str, ")", $offset); // Find first deep function
$pos = strrpos($str, "(", $first_close-1); // Find associated opening
if ($pos > $last_close) {
// This function is entirely after the previous function
$ticked = Tick(substr($str, $pos+1, $first_close-$pos)); // Tick the string inside
$str = substr($str, 0, $pos)."{".$ticked."}".substr($str,$first_close); // Replace parenthesis by curly braces temporarily
$first_close += strlen($ticked)-($first_close-$pos); // Shift parenthesis location due to new ticks being added
} else {
// This function wraps other functions; don't tick it
$str = substr($str, 0, $pos)."{".substr($str,$pos+1, $first_close-$pos)."}".substr($str,$first_close);
}
$last_close = $first_close;
$offset = $first_close+1;
}
// Replace the curly braces with parenthesis again
$str = str_replace(array("{","}"), array("(",")"), $str);
}
If you are adding the function calls in your code, as opposed to passing them in through a string-only interface, you can replace the string parsing with type checking:
function Tick($value) {
if (is_object($value)) {
$result = $value->value;
} else {
$result = '`'.str_replace(array('`', '.'), array('', '`.`'), $value).'`';
}
return $result;
}
class SqlFunction {
var $value;
function SqlFunction($function, $params) {
$sane = implode(', ', array_map('Tick', $params));
$this->value = "$function($sane)";
}
}
function Maximum($column) {
return new SqlFunction('MAX', array($column));
}
function Avg($column) {
return new SqlFunction('AVG', array($column));
}
function Greatest() {
$params = func_get_args();
return new SqlFunction('GREATEST', $params);
}
$cases = array(
"'simple'" => Tick('simple'),
"'table.field'" => Tick('table.field'),
"'table.*'" => Tick('table.*'),
"'evil`hack'" => Tick('evil`hack'),
"Avg('database.table.field')" => Tick(Avg('database.table.field')),
"Greatest(Avg('table.field1'), Maximum('table.field2'))" => Tick(Greatest(Avg('table.field1'), Maximum('table.field2'))),
);
echo "<table>";
foreach ($cases as $case => $result) {
echo "<tr><td>$case</td><td>$result</td></tr>";
}
echo "</table>";
This avoids any possible SQL injection while remaining legible to future readers of your code.
You could use preg_replace_callback() in conjunction with your Tick() method to skip at least one level of parens:
public function tick($str)
{
return preg_replace_callback('/[^()]*/', array($this, '_tick_replace_callback'), $str);
}
protected function _tick_replace_callback($str) {
$string = explode('.', str_replace('`', '', $string));
foreach ($string as $key => $value)
{
if ($value != '*')
{
$string[$key] = '`' . trim($value) . '`';
}
}
return implode('.', $string);
}
Are you generating the SQL Query or is it being passed to you? If you generating the query I wouldn't pass the whole query string just the parms/values you want to wrap in the backticks or what ever else you need.
EXAMPLE:
function addTick($var) {
return '`' . $var . '`';
}
$condition = addTick($condition);
$SQL = 'SELECT' . $what . '
FROM ' . $table . '
WHERE ' . $condition . ' = ' . $constraint;
This is just a mock but you get the idea that you can pass or loop through your code and build the query string rather than parsing the query string and adding your backticks.