I am working on an existing project on CodeIgniter and there was a need to create new routes. Existing routes work correctly, but new ones give a 404 error. Even when I make a copy of the route and controller, I also get a 404 error.
$route['offer/list'] = "offer/list_offers";
$route['offer/list1'] = "offer/list_offerss";
Second is copy.
For an example.
After you added the routes, always create the Controller after that and call the view.
Note :
Don't use my $this->loadviews()...
Use the default
$this->load->view('phpNameWithoutTheExtension');
I use $this->loadviews() because i have another libraries that controll the view.
I am working on a newly created Phalcon project, and I don't really know how to actually use multiples views.
What is the entry point? I don't really know when each method in the controller is called, under which conditions, etc.
Where is the control flow defined? is it based in the name of the view? or is there a place where you can register them?
Phalcon is a bit different than other well-known PHP frameworks, in that not much is pre-configured or pre-built by default. It's quite loosely-coupled. So you have to decide where and how your control flow will work. This means that you will need to dig deeper in the documentation and also that there could be different way to achieve the same thing.
I'm going to walk you through a simple example and provide references, so you can understand it more.
1) You would start by defining a bootstrap file (or files) that will define the routes, or entry points, and will setup and create the application. This bootstrap file could be called by an index.php file that is the default file served by the web server. Here is an example of how such bootstrap file will define the routes or entry points (note: these are just fragments and do not represent all the things that a bootstrap file should do):
use Phalcon\Di\FactoryDefault;
// initializes the dependency injector of Phalcon framework
$injector = new FactoryDefault();
// defines the routes
$injector->setShared('router', function () {
return require_once('some/path/routes.php');
});
Then it the routes.php file:
use Phalcon\Mvc\Router;
use Phalcon\Mvc\Router\Group as RouterGroup;
// instantiates the router
$router = new Router(false);
// defines routes for the 'users' controller
$user_routes = new RouterGroup(['controller' => 'users']);
$user_routes->setPrefix('/users');
$user_routes->addGet('/show/{id:[0-9]{1,9}}', ['action' => 'show']);
$router->mount($user_routes);
return $router;
Im defining routes in an alternate way, by defining routes groups. I find it to be more easy to organize routes by resource or controller.
2) When you enter the url example.com/users/show/123, the routes above will match this to the controller users and action show. This is specified by the chunks of code ['controller' => 'users'], setPrefix('/users') and '/show/{id:[0-9]{1,9}}', ['action' => 'show']
3) So now you create the controller. You create a file in, let's say, controllers/UsersController.php. And then you create its action; note the name that you used in the route (show) and the suffix of Action:
public function showAction(int $id) {
// ... do all you need to do...
// fetch data
$user = UserModel::findFirst(blah blah);
// pass data to view
$this->view->setVar('user', $user);
// Phalcon automatically calls the view; from the manual:
/*
Phalcon automatically passes the execution to the view component as soon as a particular
controller has completed its cycle. The view component will look in the views folder for
a folder named as the same name of the last controller executed and then for a file named
as the last action executed.
*/
// but in case you would need to specify a different one
$this->view->render('users', 'another_view');
}
There is much more stuff related to views; consult the manual.
Note that you will need to register such controller in the bootstrap file like (Im also including examples on how to register other things):
use Phalcon\Loader;
// registers namespaces and other classes
$loader = new Loader();
$loader->registerNamespaces([
'MyNameSpace\Controllers' => 'path/controllers/',
'MyNameSpace\Models' => 'path/models/',
'MyNameSpace\Views' => 'path/views/'
]);
$loader->register();
4) You will also need to register a few things for the views. In the bootstrap file
use Phalcon\Mvc\View;
$injector->setShared('view', function () {
$view = new View();
$view->setViewsDir('path/views/');
return $view;
});
And this, together with other things you will need to do, particularly in the bootstrap process, will get you started in sending requests to the controller and action/view defined in the routes.
Those were basic examples. There is much more that you will need to learn, because I only gave you a few pieces to get you started. So here are some links that can explain more. Remember, there are several different ways to achieve the same thing in Phalcon.
Bootstrapping:
https://docs.phalconphp.com/en/3.2/di
https://docs.phalconphp.com/en/3.2/loader
https://docs.phalconphp.com/en/3.2/dispatcher
Routing: https://docs.phalconphp.com/en/3.2/routing
Controllers: https://docs.phalconphp.com/en/3.2/controllers
More on Views (from registering to passing data to them, to templating and more): https://docs.phalconphp.com/en/3.2/views
And a simple tutorial to teach you some basic things: https://docs.phalconphp.com/en/3.2/tutorial-rest
The application begins with the routing stage. From there you grab the controller and action from the router, and feed it to the dispatcher. You set the view then call the execute the dispatcher so it access your controller's action. From there you create a new response object and set its contents equal to the view requests, and finally send the response to the client's browser -- both the content and the headers. It's a good idea to do this through Phalcon rather than echoing directly or using PHP's header(), so it's only done at the moment you call $response->send(); This is best practice because it allows you to create tests, such as in phpunit, so you can test for the existence of headers, or content, while moving off to the next response and header without actually sending anything so you can test stuff. Same idea with exit; in code, is best to avoid so you can write tests and move on to the next test without your tests aborting on the first test due to the existence of exit.
As far as how the Phalcon application works, and in what steps, it's much easier to follow the flow by looking at manual bootstrapping:
https://docs.phalconphp.com/en/3.2/application#manual-bootstrapping
At the heart of Phalcon is the DI, the Dependency Injection container. This allows you to create services, and store them on the DI so services can access each other. You can create your own services and store them under your own name on the DI, there's nothing special about the names used. However depending on the areas of Phalcon you used, certain services on the DI are assumed like "db" for interacting with your database. Note services can be set as either shared or not shared on the DI. Shared means it implements singleton and keeps the object alive for all calls afterwards. If you use getShared, it does a similar thing even if it wasn't initially a shared service. The getShared method is considered bad practice and the Phalcon team is talking about removing the method in future Phalcon versions. Please rely on setShared instead.
Regarding multiple views, you can start with $this->view->disable(); from within the controller. This allows you to disable a view so you don't get any content generated to begin with from within a controller so you can follow how views work from within controllers.
Phalcon assumes every controller has a matching view under /someController/someView followed by whatever extension you registered on the view, which defaults to .volt but can also be set to use .phtml or .php.
These two correspond to:
Phalcon\Mvc\View\Engine\Php and Phalcon\Mvc\View\Engine\Volt
Note that you DON'T specify the extension when looking for a template to render, Phalcon adds this for you
Phalcon also uses a root view template index.volt, if it exists, for all interactions with the view so you can use things like the same doctype for all responses, making your life easier.
Phalcon also offers you partials, so from within a view you can render a partial like breadcrumbs, or a header or footer which you'd otherwise be copy-pasting into each template. This allows you to manage all pages from the same template so you're not repeating yourself.
As far as which view class you use within Phalcon, there's two main choices:
Phalcon\Mvc\View and Phalcon\Mvc\View\Simple
While similar, Phalcon\Mvc\View gives you a multiple level hierarchy as described before with a main template, and a controller-action based template as well as some other fancy features. As far as Phalcon\Mvc\View\Simple, it's much more lightweight and is a single level.
You should be familiar with hierarchical rendering:
https://docs.phalconphp.com/en/3.2/views#hierarchical-rendering
The idea is with Phalcon\Mvc\View that you have a Main Layout (if this template exists) usually stored in /views/index.volt, which is used on every page so you can toss in your doctypes, the title (which you would set with a variable the view passed in), etc. You'd have a Controller Layout, which would be stored under /views/layouts.myController.volt and used for every action within a controller (if this template exists), finally you'd have the Action Layout which is used for the specific action of the controller in /views/myController/myAction.volt.
There are all types of ways you can break from Phalcon's default behavior. You can do the earlier stated $this->view->disable(); so you can do everything manually yourself so Phalcon doesn't assume anything about the view template. You can also use ->pick to pick which template to use if it's going to be different than the controller and action it's ran in.
You can also return a response object from within a controller and Phalcon will not try to render the templates and use the response object instead.
For example you might want to do:
return $this->response->redirect('index/index');
This would redirect the user's browser to said page. You could also do a forward instead which would be used internally within Phalcon to access a different controller and/or action.
You can config the directory the views are stored with setViewsDir. You can also do this from within the controller itself, or even within the view as late as you want, if you have some exceptions due to a goofy directory structure.
You can do things like use $this->view->setTemplateBefore('common') or $this->view->setTemplateAfter('common'); so you can have intermediate templates.
At the heart of the view hierarchy is <?php echo $this->getContent(); ?> or {{ content() }} if you're using Volt. Even if you're using Volt, it gets parsed by Phalcon and generates the PHP version with $this->getContent(), storing it in your /cache/ directory, before it is executed.
The idea with "template before" is that it's optional if you need another layer of hierarchy between your main template and your controller template. Same idea with "template after" etc. I would advise against using template before and after as they are confusing and partials are better suited for the task.
It all depends on how you want to organize your application structure.
Note you can also swap between your main template to another main template if you need to swap anything major. You could also just toss in an "if" statement into your main template to decide what to do based on some condition, etc.
With all that said, you should be able to read the documentation and make better sense of how to utilize it:
https://docs.phalconphp.com/en/3.2/api/Phalcon_Mvc_View
In Laravel, I want to have dynamic routes for simple pages functionality.
So say I have couple routes, like /blog will call BlogController and so on. And I have routes like this /page/{slug} that call PageController.
How can I do it so if route is not found (for example /my-test-page), the system would call the controller as if the route was /page/my-test-page (so that 404 is only throw if PageController cannot find the page in the database).
I saw I can catch the 404 exceptions, but I don't know how I can simulate the route call to PageController from there?
Thanks a lot!
redirect(action(PageController#methodName))
Does this solves your problem? Of course you will need to import the redirect() method.
I am using the resource route to access several crud functions on my site but I am getting a NotFoundHttpException error when accessing one of several pages. This was working this earlier and I don't think I have changed anything.
Route::resource('/contractors', 'ContractorController');
The specific ContractorController method:
public function skills($id)
{
$contractor = Contractor::find($id);
return View::make('contractors.skills')
->with('contractor', $contractor);
}
I have all of the basic crud methods located in the ContractorController too. I am using the skills method to create a new view that edits tags in a pivot table
my url is public/contractors/1/skills and this blade view:
contractors/skills.blade.php
Do you see anything that I am doing wrong?
There's only a few routes that Resource controllers by default will handle, you can see a full list of them (7 in all) in the documentation entry for Resource Controllers.
The skills URI segment is not one of them. You will need to add a separate route for that:
Route::get('/contractors/{contractorId}/skills', 'ContractorController#skills');
However, this isn't really RESTful design. You may be better off with a separate skills resource.
I might be approaching this the wrong way, but in my Base Controller I have defined, in the construct, my Asset container "header", eg:
Asset::container('header')->add('main-css', 'css/style.css');
// etc
As all my other controllers extend the base controller this is working fine and my assests are placed in the header container when I call
{{Asset::container('header')->styles()}}
In my master.blade.php
However, when a 404 is triggered
Event::listen('404', function()
{
return Response::error('404');
});
My styles aren't loaded. I assume this is because the laravel error controller isn't extending the base controller.
Any easy way around this without redeclaring my assets or something. I was assuming that declaring all my assets in the blade layout wasn't the best approach.
Ah ha!
I've just worked it out.
The answer is to use View Composers (one of the Laravel concepts I never properly investigated..)
So in my routes.php (temporary placement - I should probably place composers in their own auto-loaded file) I've just added the following.
View::composer(array('layout.master'), function($view)
{
Asset::container('header')->add('bootstrap-css', 'bundles/bootstrapper/css/bootstrap.min.css');
Asset::container('header')->add('main-css', 'css/style.css');
Asset::container('footer')->add('bootbox', 'js/vendor/bootbox.min.js');
});
Given that every frontend file I have is using /views/layout/master.blade.php then I know that I can apply assets to it by passing 'layout.master' to View::composer.
Et voila - now my 404 view is also loading the correct assets.