First of all I want to say that I have read other topic where the similar problem arises, but applying solutions, none has operated what I want.
I have in my computer 1 IP: 192.168.1.217 configured a virtualhost.
C:\wamp\bin\apache\Apache2.4.4\conf\extra\httpd-vhosts.conf:
<VirtualHost *: 80>
ServerAdmin webmaster#sfi.com
DocumentRoot "c:/wamp/www/sfi"
<Directory "c:/wamp/www/sfi">
Options Indexes FollowSymLinks
AllowOverride All
Allow from all
</Directory>
ServerName sfi
ErrorLog "logs/sfi-error.log"
CustomLog "logs/sfi-access.log" common
</VirtualHost>
And I have added the following line:
NameVirtualHost *: 80
In the file C:\wamp\bin\apache\Apache2.4.4\conf\httpd.conf I have modified the following lines:
Include `conf/extra/httpd-vhosts.conf` (remove `#`)
<Directory /> (Grant permissions)
AllowOverride none
AllowOverride All
Order deny, allow
Allow from all
</Directory>
<Directory "c:/wamp/www"> (Grant permissions)
Order Deny, Allow
Deny from all
Allow from all
</Directory>
Finally, I added to C:\Windows\System32\drivers\etc\hosts
127.0.0.1 sfi
The virtualhost works perfectly on the machine that has installed wamp server.
In the machine I want to access my project, I set to C:\Windows\System32\ drivers\etc\ hosts the following line:
192.168.1.217 sfi
But not load my project directory.
Is there something I've done wrong?
Thanks.
You simply have a firewall issue, completely outside your httpd configuration.
Related
I am using XAMPP 3.2.1 and creating new virtual host in http-vhosts.conf file in Apache the code below
<VirtualHost *:8080>
DocumentRoot "C:/xampp/htdocs/support/srinet"
ServerName supportcenter.sevplcorp.com
Alias /mrpdf "E:/temp"
<Directory "C:/xampp/htdocs/support/srinet">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
Order Deny,Allow
Allow from all
Require all granted
</Directory>
When I open supportcenter.sevplcorp.com in browser windows it shows like below
You have to edit your host file located at : %WINDIR%\system32\drivers\etc\hosts.
Add a newline 127.0.0.1 supportcenter.sevplcorp.com
Probably you haven't altered your hosts file to map the host domain to server's IP address. Assuming that you're running XAMPP on your own PC, open your editor as Administrator (notepad is sufficient), then open this file:
c:\Windows\System32\Drivers\etc\hosts
...and add this line to the bottom:
127.0.0.1 supportcenter.sevplcorp.com
Save the file and, after that, visiting supportcenter.sevplcorp.com should work. Basically, by altering the hosts file you're telling the browser (and everything else that might want to access supportcenter.sevplcorp.com) that it's actually your PC.
This problem has been bugging me for days and I really need an answer.
I have a previous WAMP server in which I have configured properly so I can set up virtual hosts for applications that I build. It served me well for months.
Recently, there's this software, in which I think is a Malware, that run in my pc. The software was removed and I scanned the pc and there were no viruses.
I re-installed WAMP server and configured it again. It went well but the virtual hosts are not behaving properly.
These are what I have declared:
In httpd-vhost:
<VirtualHost *:80>
ServerAdmin #removed
DocumentRoot "c:/wamp/www/Thesis"
ServerName pixtcha.dev
<Directory "c:/wamp/www/Thesis">
Options Indexes FollowSymLinks
AllowOverride all
Order Deny,Allow
</Directory>
</VirtualHost>
<VirtualHost *:80>
ServerAdmin #removed
DocumentRoot "c:/wamp/www/mvc-pe-system/web"
ServerName copers.com
<Directory "c:/wamp/www/mvc-pe-system/web">
Options Indexes FollowSymLinks
AllowOverride all
Order Deny,Allow
</Directory>
</VirtualHost>
In my hosts file:
127.0.0.1 pixtcha.dev
127.0.0.1 copers.com
The thing is, I am able to access the pixtcha.dev properly and there were no problems, while the copers.com is inaccessible, when I type it, it redirects me to some website from the web. I just don't understand why this happens. I even tried flushing the dns if there were corrupted local files but I just can't figure it out.
Also, I have tried using the server names from my previous virtual host and they are all inaccessible too. They are giving me:
http://copers.edu.ph is not available
So I resorted to using new server names, but I don't understand why can't I use the previous server names from my previous WAMP configuration. :(
What do you think are the problems? And how to solve them?
Please help. Thanks in advance.
Ok a couple of things that might help here.
As Apache 2.4 is IPV4 and IPV6 aware you need to change your HOSTS file like this so if the browser decides to use IPV6 it knows where to find your domains. I wish I knew what controls the broswers decision, but I dont.
127.0.0.1 localhost
127.0.0.1 pixtcha.dev
127.0.0.1 copers.com
::1 localhost
::1 pixtcha.dev
::1 copers.com
Dont forget to restart the dnscache or reboot after changing this file.
From a command windows, started using the 'Run as Administrator' option, do these 2 commands to restart the dnscache.
net stop dnscache
net start dnscache
Also when you create Virtual Hosts the default host, as defined in httpd.conf, is ignored, so you need to add a VHOST definition for localhost.
Also you are using old Apache 2.2 syntax in your VHOST definitions, incorrectly as well as it happens, and this should be changed to Apache 2.4 syntax
Also it is better to stick to lower case for directory names, Windows does not care but if you ever move code to a Unix live server it may cause confusion.
# Should be the first VHOST definition so that it is the default virtual host
# Also access rights should remain restricted to the local PC and the local network
# So that any random ip address attack will recieve an error code and not gain access
<VirtualHost *:80>
DocumentRoot "c:/wamp/www"
ServerName localhost
ServerAlias localhost
<Directory "c:/wamp/www">
AllowOverride All
Require local
</Directory>
</VirtualHost>
<VirtualHost *:80>
ServerAdmin #removed
DocumentRoot "c:/wamp/www/thesis"
ServerName pixtcha.dev
<Directory "c:/wamp/www/thesis">
Options Indexes FollowSymLinks
AllowOverride all
Require local
</Directory>
</VirtualHost>
<VirtualHost *:80>
ServerAdmin #removed
DocumentRoot "c:/wamp/www/mvc-pe-system/web"
ServerName copers.com
<Directory "c:/wamp/www/mvc-pe-system/web">
Options Indexes FollowSymLinks
AllowOverride all
Require local
</Directory>
</VirtualHost>
Check and make sure that your scripts (PHP?) in your copers.com root (index.php?) are not redirecting to these outside URLs, or to URLs further inside your local site that would redirect outside as well.
Also in Chrome, you can open the Network tab of Developer Tools to see what actual web requests are being made, and in what order.
In order for me to be able to run a Zend Framework project on my local development machine, I made changes to Apache's \etc\apache2\httpd.conf and the openSUSE system's \etc\hosts files. I set up a test3.local alias for an individual Zend project, and things seem to "work".
Before I started fiddling with things, I could access phpMyAdmin simply by entering http://localhost/phpMyAdmin/ in my browser. And if I take away my changes, that once again works.
Using this answer as a basis, I tried to set up an additional virtual host specifically for phpMyAdmin, hoping to "solve" this problem. But right now if key in the virtual host name, admin.local, that I intend to take me to phpMyAdmin, I get a 403 error like this:
(source: willmatheson.com)
Here is my present httpd.conf:
### Virtual server configuration ############################################
IncludeOptional /etc/apache2/vhosts.d/*.conf
<VirtualHost *:80>
ServerName test3.local
DocumentRoot /home/william/public_html/ZendTest3/public
SetEnv APPLICATION_ENV "development"
<Directory /home/william/public_html/ZendTest3/public>
DirectoryIndex index.php
AllowOverride All
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
<VirtualHost *:80>
ServerName admin.local
DocumentRoot /var/lib/mysql/phpMyAdmin
# This gives permission to serve the directory
<Directory /var/lib/mysql/phpMyAdmin>
DirectoryIndex index.php
Options None
AllowOverride All
# This allows eveyone to access phpmyadmin, which you may not want
Order Allow,Deny
Allow from all
</Directory>
</VirtualHost>
and hosts:
127.0.0.1 localhost
127.0.0.1 local
127.0.0.1 test3.local
127.0.0.1 admin.local
Ideally I'd like to not have to specify a virtual host for phpMyAdmin at all, because I'm sure to muck it up, and just somehow have the settings to make the Zend project work but to also have phpMyAdmin work like it did before.
I know this question was already answered, but I thought I'd share what I did to overcome a similar problem, in case it helps anyone else.
My problem was:
I started to get localhost/phpmyadmin 404 error after changing the DocumentRoot folder in httpd.conf. The change I made was to change the DocumentRoot
from:
DocumentRoot "C:\Program Files (x86)\Zend\Apache2/htdocs"
to:
DocumentRoot "C:\Program Files (x86)\Zend\Apache2/htdocs/a/deeper/folder"
I fixed it by changing a line in zend.conf
from:
Alias /phpMyAdmin "C:\Program Files (x86)\Zend\phpMyAdmin"
to:
Alias /phpMyAdmin "C:\Program Files (x86)\Zend\ZendServer\data\apps\http\__default__\0\phpMyAdmin\4.0.5.4_41"
Hope this helps somebody else!
Well, there's a good reason I was getting a 403 - I was digging in the wrong place. My installation of phpMyAdmin was actually in /srv/www/htdocs/phpMyAdmin. Changed that, restarted Apache (sudo systemctl restart apache2.service) and things seem to work.
If you're interested in how the heck to find files and folders on openSUSE, the following steps worked for me:
sudo zypper install findutils-locate
su
updatedb (go check your e-mail)
locate phpMyAdmin (like that, not 'phpmyadmin')
I'm new to using XAMPP so this may be simple to some people.
I have a few php projects that I would like to be able to debug locally and view in the browser (not concurrently, but without having to change config files/copy project folders each time I want to work on a different project).
On IIS, you could set up multiple sites to serve from your machine, and I'm looking for something similar in XAMPP. When using IIS, I added multiple records to the Windows hosts file so I could access the locally hosted sites by typing friendly web-style addresses (like http://myproject1.dev)
Thanks.
Greg, you're almost there--you need (like Moses said) to setup virtual hosts.
So if your Windows hosts file has
127.0.0.1 localhost
127.0.0.1 mysite-dev.com
127.0.0.1 anothersite-dev.com
Your virtual hosts file (httpd-vhosts.conf) might look like:
<VirtualHost *:80>
DocumentRoot C:/xampp/htdocs/
ServerName localhost
</VirtualHost>
<VirtualHost *:80>
ServerName mysite-dev.com
DocumentRoot "C:/sites/mysite-dev"
<Directory "C:/sites/mysite-dev">
Options Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
<VirtualHost *:80>
ServerName anothersite-dev.com
DocumentRoot "C:/sites/anothersite-dev"
<Directory "C:/sites/anothersite-dev">
Options Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
Don't forget to restart the web server after you make any changes.
I would like to make an additional in terms of up to date information.
XAMMP uses port 80 by default and we are able to publish 1 website. I also use IIS for .Net projects. In this respect, I set the port to XAMMP except the 80 port. So I avoid a conflict.
When we want to publish more than one website, we should do the following operations to httpd.conf (this is the current name).
1. Setting the ports
Find the #Listen expression in the httpd.conf file.
Change Listen 80 to Listen 8000 (or whatever else you want)
Listen 8000
If you need 3 different websites, type the others, including 1 definition on each line, as follows.
Listen 8001
Listen 8002
Listen 8003
2. Define the file paths of sites accessed through ports
Again, find in the httpd.conf file.
Identify the folders of each website as follows.
As you would see, I've created 3 directories called 8000, 8001, 8002 and 8003 under the htdocs directory within the XAMMP directory.
<VirtualHost *:8000>
DocumentRoot "C:\XAMPP\htdocs\8000"
ServerName localhost:8000
<\ VirtualHost>
<VirtualHost *:8001>
DocumentRoot "C:\XAMPP\htdocs\8001"
ServerName localhost:8001
<\ VirtualHost>
<VirtualHost *:8002>
DocumentRoot "C:\XAMPP\htdocs\8002"
ServerName localhost:8002
<\ VirtualHost>
<VirtualHost *:8003>
DocumentRoot "C:\XAMPP\htdocs\8003"
ServerName localhost:8003
<\ VirtualHost>
Restart your Apahche server on XAMMP.
You can now view your 3rd site, such as http://localhost:8003 or http://192.168.1.1:8003/.
Hope to be useful.
This question was asked almost ten years ago, and the answers above are a bit dated. Note that XAMPP has a "How-To" for virtual hosts avilable off the dashboard, when you install it.
From the "Welcome to XAMPP for Windows" page (localhost/dashboard, the default when you first load localhost) click on the "HOW-TO" Guides in the top menu bar. From there, look for the link "Configure Virtual Hosts" which will lead you to the localhost page "http://localhost/dashboard/docs/configure-vhosts.html"
In a nutshell, the process involves editing the "httpd-vhosts.conf" file (typically in C:\XAMPP\apache\conf\extra) and replacing the contents of that file with something like this:
<VirtualHost *:80>
DocumentRoot "C:/xampp/htdocs/"
ServerName localhost
</VirtualHost>
# vhosts - note sample entry from XAMPP how-to throws an error, so try this:
<VirtualHost *:80>
DocumentRoot "C:/Users/jdoe/Documents/dev.mysite.com/htdocs"
ServerName mysite.local
<Directory "C:/Users/jdoe/Documents/dev.mysite.com/htdocs">
Require all granted
Options Indexes FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
Additional vhosts (including SSL hosts) can be had by cloning the entry, and modifying DocumentRoot and ServerName directives and port numbers (e.g. 443 for TLS (SSL)). You can find tutorials on the web for creating and signing your own certificate, if you want to go that route.
The final step is to get your Windows machine to point your browser to the Apache host for your virtual domain (e.g. above, http://mysite.local). Using a text editor (Notebook will do) as administrator append the following entry onto your hosts file, which lives here:
C:\Windows\System32\drivers\etc\hosts
Append this entry to the hosts file:
127.0.0.1 mysite.local
IMPORTANT - you must restart your Windows machine or the new host will not respond. Some documentations will tell you just to restart the browser and Apache server, but I've found that's not sufficient.
IME, the hosts system and Apache directives can be particular, so be patient. You may need to rebuild configs, restart Apache, and restart your machine more than once.
First time cake user and I'm having real apache problems. For some reason the .htaccess is trying to find
File does not exist: /Library/WebServer/Documents/Users
but there is no such directory as Users. I have tried setting up the following also:
/etc/apache2/extra/httpd-vhosts.conf
<VirtualHost *:80 >
DocumentRoot "/Users/username/Sites/mysite/app/webroot"
ServerName mysite.dev
ServerAlias www.mysite.dev mysite.dev *.mysite.dev
<Directory "/Users/username/Sites/mysite/app/webroot">
Options Indexes FollowSymLinks
AllowOverride All
</Directory>
</VirtualHost>
/etc/hosts
127.0.0.1 mysite.dev
/etc/apache2/users/username.conf
<Directory "/Users/username/Sites/">
Options Indexes MultiViews FollowSymlinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
That also hasn't worked, but with a different error Failed opening required 'cake/libs/cache/file.php'
Although I'd rather not use virtual hosts, and just run it off localhost
Seems like the solution that worked for me was to edit /etc/apache2/users/username.conf and add this at the top:
DocumentRoot "/Users/username/Sites"
And the default cakePHP download now runs ok.
Looks like Apache is trying to find your webroot in a different location--the default location, if memory serves. If you want to use virtual hosts (which would be my recommendation, for whatever it's worth), ensure that the NameVirtualHost directive is uncommented. By default, it's commented out:
NameVirtualHost *:80
If you'd prefer not to use virtual hosts for whatever reason, ensure that the NameVirtualHost is commented out (your <VirtualHost> blocks will be ignored) and change the DocumentRoot value to the proper directory:
DocumentRoot "/Users/username/Sites/mysite/app/webroot"
That should tell Apache to look in the right place.