This question already has answers here:
Creating and uploading a file in PHP to an FTP server without saving locally
(4 answers)
Closed 7 years ago.
I want to create a CSV file in a remote server in a certain folder. I have the FTP details, and the code for creating the CSV ready, but my problem is I am unable to save that CSV in that remote server. I used below code to connect to FTP:
$ftp_server = "127.0.0.1"; // FTP Server Address (exlucde ftp://)
$ftp_user_name = "username"; // FTP Server Username
$ftp_user_pass = "password"; // Password
// Connect to FTP Server
$conn_id = ftp_connect($ftp_server);
// Login to FTP Server
$login_result = ftp_login($conn_id, $ftp_user_name, $ftp_user_pass);
Now I want to save the file to the connection made above.
Currently below is the code that i used to open a csv stream.
$structure = './orderexport/'.$order_date;
if (!mkdir($structure, 0777, true)) {
$filename = "orderexport/".$order_date."/test_".$order_id.".csv";
} else{
$filename = "orderexport/".$order_date."/test_".$order_id.".csv";
}
$fp = fopen($filename, 'w');
Is there anything I need to do on csv end too to save it to remote server?
Just for your reference ( Code not tested , just make use of ftp_mkdir() & ftp_put() )
$ftp_server = "127.0.0.1"; // FTP Server Address (exlucde ftp://)
$ftp_user_name = "username"; // FTP Server Username
$ftp_user_pass = "password"; // Password
// Connect to FTP Server
$conn_id = ftp_connect($ftp_server);
// Login to FTP Server
$login_result = ftp_login($conn_id, $ftp_user_name, $ftp_user_pass);
$structure = './orderexport/'.$order_date;
if (ftp_mkdir($ftp_conn, $structure )) {
$filename = "orderexport/".$order_date."/test_".$order_id.".csv";
ftp_put($conn_id, $filename, $file, FTP_ASCII);
echo 'Success';
}
else{
echo 'Error';
}
Related
This is a very basic question since I do not properly understand the underlying concepts of the different protocols. Please be indulgent.
I can upload files to my site with FTP using Filezilla. Now I'm developing a user interface for sending data to update a database and files (photos) to be saved in a directory. I send this data with POST (see here). I get the file, but cannot save it to the destination directory performing
move_uploaded_file($_FILES['PhotoToUpload']['tmp_name'],"../../Photos/".$file_name);
I think is because of permissions (currently 755). Since I can currently upload with Filezilla FTP (so I understand I have the permissions to do that),
my question is:
Is bad practice (or conceptually wrong) to take the temp file created after the POST and load it with a FTP code like the following (taken from here)?
<?php
$ftp_server = "myftp.co.uk";
$ftp_user_name = "myusername";
$ftp_user_pass = "mypass";
$destination_file = "../../Photos/";
$source_file = $_FILES['PhotoToUpload']['tmp_name'];
// set up basic connection
$conn_id = ftp_connect($ftp_server);
ftp_pasv($conn_id, true);
// login with username and password
$login_result = ftp_login($conn_id, $ftp_user_name, $ftp_user_pass);
// check connection
if ((!$conn_id) || (!$login_result)) {
echo "FTP connection has failed!";
echo "Attempted to connect to $ftp_server for user $ftp_user_name";
exit;
} else {
echo "Connected to $ftp_server, for user $ftp_user_name";
}
// upload the file
$upload = ftp_put($conn_id, $destination_file, $source_file, FTP_BINARY);
// check upload status
if (!$upload) {
echo "FTP upload has failed!";
} else {
echo "Uploaded $source_file to $ftp_server as $destination_file";
}
// close the FTP stream
ftp_close($conn_id);
?>
I'm trying to download file via php script, but unfortunately with this script i get error:
PHP Warning: ftp_connect(): php_network_getaddresses: getaddrinfo
failed: nodename nor servname provided, or not known in
/Users/apple/projects/asystem/download_dump.php on line 15
i try to put different FTP address test it and it worked fine
so the problem is 100% in the server address...
// define some variables
$folder_path = "/Users/apple/projects/asystem";
$local_file = "auct_lots_full.xml.zip";
$server_file = "auct_lots_full.xml.zip";
//-- Connection Settings
$ftp_server = "ftp://xxxx_user:Eecohshxxxxxx#auctionsdata.xxxxx.com"; // Address of FTP server.
$ftp_user_name = "xxxxx_user"; // Username
$ftp_user_pass = "xxxx"; // Password
#$destination_file = "FILEPATH";
// set up basic connection
$conn_id = ftp_connect($ftp_server);
// login with username and password
$login_result = ftp_login($conn_id, $ftp_user_name, $ftp_user_pass);
// try to download $server_file and save to $local_file
if (ftp_get($conn_id, $local_file, $server_file, FTP_BINARY)) {
echo "Successfully written to $local_file\n";
} else {
echo "There was a problem\n";
}
// close the connection
ftp_close($conn_id);
?>
so yes! the problem was that i use wrong path to the FTP. This code works:
//-- Connection Settings
$ftp_server = "auctionsdata.xxxxx.com"; // Address of FTP server.
$ftp_user_name = "xxxxx_user"; // Username
$ftp_user_pass = "xxxx"; // Password
I have searched a lot for the answer and found some results but none of one is working for me. I want to transfer zip file from one server to another server using ftp functions. File went transferred but without data. Here is my code as follows:
<?php
$file = 'LICENSE.zip';
$fp = 'LICENSE.zip';
$ftp_server = "ftpserver name";
$ftp_user_name = "ftp username";
$ftp_user_pass = "ftp password";
// set up basic connection
$conn_id = ftp_connect($ftp_server);
$login_result = ftp_login($conn_id, $ftp_user_name, $ftp_user_pass);
// login with username and password
// upload a file
ftp_chdir($conn_id,'/dev');
if (ftp_put($conn_id, $file, $fp, FTP_BINARY)) {
echo "successfully uploaded $file\n";
} else {
echo "There was a problem while uploading $file\n";
}
// close the connection
ftp_close($conn_id);
fclose($fp);
?>
Even I am unable to transfer a simple .php or .txt file with their data. In this case only files without data is moving.
Is it possible for a cron job to copy a file from a remote server and move it to our server and over-right the file currently sitting there?
I have looked for an answer on here and not found a suitable solution as most are moving a file to and not from a remote server
there will be two sets of ftp details to include.
This is for a product feed and i really cant get my head around it.
Am i on the right line of thinking with this that i have adapted.
<?php
$file = 'remotefile.txt';
$remote_file = 'ourfile.txt';
$ftp_server ='example.com';
$ftp_user_name = 'username';
$ftp_user_pass = 'password';
// set up basic connection
$conn_id = ftp_connect($ftp_server);
// login with username and password
$login_result = ftp_login($conn_id, $ftp_user_name, $ftp_user_pass);
// upload a file
if (ftp_put($conn_id, $remote_file, $file, FTP_ASCII)) {
echo "successfully uploaded $file\n";
} else {
echo "There was a problem while uploading $file\n";
}
// close the connection
ftp_close($conn_id);
?>
Yes, it's possible.
Cronjobs are made to execute scripts periodically (every hours, every day, etc...).
So everything you can do with a script, you can do with cronjobs.
after playing around with the code i noticed i was using ftp_put and not ftp_get
here is the working code
<?php
$file = 'remotefile.txt';
$remote_file = 'ourfile.txt';
$ftp_server ='example.com';
$ftp_user_name = 'username';
$ftp_user_pass = 'password';
// set up basic connection
$conn_id = ftp_connect($ftp_server);
// login with username and password
$login_result = ftp_login($conn_id, $ftp_user_name, $ftp_user_pass);
// upload a file
if (ftp_get($conn_id, $remote_file, $file, FTP_ASCII)) {
echo "successfully uploaded $file\n";
} else {
echo "There was a problem while uploading $file\n";
}
// close the connection
ftp_close($conn_id);
?>
Variation of my question on Ubuntu.SE:
This is (basically) what I'm doing when I log into a FTP:
ftp user:password#server
ftp: user:password#server: Unknown host
ftp> echo HELLO WORLD!
ftp> quit
Is it possible to "echo" over ftp in PHP?
<?php
$ftp_server = "server";
$ftp_user_name = "user";
$ftp_user_pass = "SuperSecretPassword";
$message = "Hello World!";
// connect
$conn_id = ftp_connect($ftp_server);
// login with username and password
$login_result = ftp_login($conn_id, $ftp_user_name, $ftp_user_pass);
// Echo Message
$upload = ftp_echo($conn_id, $message);
// close the FTP stream
ftp_close($conn_id);
?>
Maybe I'm an idiot, but all the commands I see are for pushing, pulling or doing stuff locally. Does something else act as 'ftp> echo "Hello World!"' and am I'm looking right at it without realizing it?
I think you want ftp_raw. You'd use this to put an arbitrary command to your ftp server.
<?php
$fp = ftp_connect("ftp.example.com");
/* This is the same as:
ftp_login($fp, "joeblow", "secret"); */
ftp_raw($fp, "USER joeblow");
ftp_raw($fp, "PASS secret");
?>