I am a little bit in doubt, if this is a correct notation in a three dimensional array. This is just a part of my code, but when I run the code I get an error, where it says I need ')'.
$property = array(
"green" => array(
"numbers" => array(1 => "#ffffff"
),
"yellow" => array(
"numbers" => array(6 => "#81c77d"
),
"white" => array(
"numbers" => array(24 => "#81e87c"
),
"grey" => array(
"numbers" => array(0 => "#ffffff"
),
"red" => array(
"numbers" => array(34 => "#dfb07b"
)
);
You are missing parentheses - they are always needed to pair up. It should look like this:
$property = array(
"green" => array(
"numbers" => array(1 => "#ffffff")
),
"yellow" => array(
"numbers" => array(6 => "#81c77d")
),
"white" => array(
"numbers" => array(24 => "#81e87c")
),
"grey" => array(
"numbers" => array(0 => "#ffffff")
),
"red" => array(
"numbers" => array(34 => "#dfb07b")
)
);
Use an IDE like Eclipse or Aptana Studio which will show you the syntax errors while you type so that you won't need to run the code to see something is wrong.
$property = array(
"green" => array(
"numbers" => array(1 => "#ffffff")
),
"yellow" => array(
"numbers" => array(6 => "#81c77d")
),
"white" => array(
"numbers" => array(24 => "#81e87c")
),
"grey" => array(
"numbers" => array(0 => "#ffffff")
),
"red" => array(
"numbers" => array(34 => "#dfb07b")
)
);
Parenthesis after the hex code
$property = array(
"green" => array(
"numbers" => array(1 => "#ffffff")
),
"yellow" => array(
"numbers" => array(6 => "#81c77d")
),
"white" => array(
"numbers" => array(24 => "#81e87c")
),
"grey" => array(
"numbers" => array(0 => "#ffffff")
),
"red" => array(
"numbers" => array(34 => "#dfb07b")
),
);
You missed parenthesis.
Related
I would like to replace keys in arrays, because I will move them on two indexes up.
Problem that I am facing is that those are containing same names which will not be ok, if i want to move them up.
This is how array looks like.
$list = array(
'ind' => array(
'messagetype' => 'Alert',
'visibility' => 'Public',
'info' => array(
0 => array(
'urgency' => 'Urgent',
'params' => array(
0 => array(
'Name' => 'display',
'value' => '3; top',
),
1 => array(
'Name' => 'level',
'value' => '1; blue',
),
),
'area' => array(
'ard' => 'Bob',
'code' => array(
0 => array(
'Name' => 'Badge',
'value' => 'GSSD154',
),
),
),
),
1 => array(
'messagetype' => 'Information',
'visibility' => 'Private',
'info' => array(
0 => array(
'urgency' => 'Minor',
'params' => array(
0 => array(
'Name' => 'display',
'value' => '1; left',
),
1 => array(
'Name' => 'level',
'value' => '1; red',
),
),
'area' => array(
'ard' => 'Bob',
'code' => array(
0 => array(
'Name' => 'Badge',
'value' => 'GBECS23',
),
),
),
),
),
),
),
),
);
and this is how I would like the output to be with changing keys in Name0, Name1, which are inside params.
$list = array(
'ind' => array(
'messagetype' => 'Alert',
'visibility' => 'Public',
'info' => array(
0 => array(
'urgency' => 'Urgent',
'params' => array(
0 => array(
'Name0' => 'display',
'value0' => '3; top',
),
1 => array(
'Name1' => 'level',
'value1' => '1; blue',
),
),
'area' => array(
'ard' => 'Bob',
'code' => array(
0 => array(
'Name' => 'Badge',
'value' => 'GSSD154',
),
),
),
),
1 => array(
'messagetype' => 'Information',
'visibility' => 'Private',
'info' => array(
0 => array(
'urgency' => 'Minor',
'params' => array(
0 => array(
'Name0' => 'display',
'value0' => '1; left',
),
1 => array(
'Name1' => 'level',
'value1' => '1; red',
),
),
'area' => array(
'ard' => 'Bob',
'code' => array(
0 => array(
'Name' => 'Badge',
'value' => 'GBECS23',
),
),
),
),
),
),
),
),
);
I have tried with a lots of examples over this website, but could not find one to achieve this.
Code that I used from
How to replace key in multidimensional array and maintain order
function replaceKey($subject, $newKey, $oldKey) {
// if the value is not an array, then you have reached the deepest
// point of the branch, so return the value
if (!is_array($subject)) {
return $subject;
}
$newArray = array(); // empty array to hold copy of subject
foreach ($subject as $key => $value) {
// replace the key with the new key only if it is the old key
$key = ($key === $oldKey) ? $newKey : $key;
// add the value with the recursive call
$newArray[$key] = replaceKey($value, $newKey, $oldKey);
}
return $newArray;
}
$s = replaceKey($list, 'Name0', 'Name');
print "<PRE>";
print_r($s);
at the moment I get this output:
[0] => Array
(
[Name0] => display
[value] => 1; left
)
[1] => Array
(
[Name0] => level
[value] => 1; red
)
any help would be appreciated. regards
A very strange question, but why not?
The following function returns nothing (a procedure) and changes the array in-place using references but feel free to rewrite it as a "real" function (without references and with a return statement somewhere).
The idea consists to search for arrays, with numeric keys and at least 2 items, in which each item has the Name and value keys. In other words, this approach doesn't care about paths where the targets are supposed to be:
function replaceKeys(&$arr) {
foreach ($arr as &$v) {
if ( !is_array($v) )
continue;
$keys = array_keys($v);
if ( count($keys) < 2 ||
$keys !== array_flip($keys) ||
array_keys(array_merge(...$v)) !== ['Name', 'value'] ) {
replaceKeys($v);
continue;
}
foreach ($v as $k => &$item) {
$item = array_combine(["Name$k", "value$k"], $item);
}
}
}
replaceKeys($list);
print_r($list);
demo
i have a problem with this array, i need get sum form string merge with same key
$data = array(
0 => array(
'name' => 'Alfa Edison, Dwiki',
'budget' => 3700,
),
1 => array(
'name' => 'Maverick Sam',
'budget' => 500,
),
2 => array(
'name' => 'Dwiki',
'budget' => 1000,
),
3 => array(
'name' => 'Steve, Dwiki',
'budget' => 2000,
),
4 => array(
'name' => 'Alfa Edison',
'budget' => 700,
),
5 => array(
'name' => 'Maverick Sam',
'budget' => 4000,
),
6 => array(
'name' => 'Steve, Alfa Edison',
'budget' => 334,
),
);
i want the result this:
array(
0 => array(
'name' => 'Alfa Edison',
'budget' => 4734,
),
1 => array(
'name' => 'Dwiki',
'budget' => 6700,
),
2 => array(
'name' => 'Maverick Sam',
'budget' => 4500,
),
3 => array(
'name' => 'Steve',
'budget' => 2334,
),
);
How to merge String with same Key and Sum the Budget. i try to for each but i'm fail.
i try array_reduce and explode the name but fail.
The problem is that each of the "keys" (names) is really more than one key. So as you iterate the input array you'll need to split those up, then add an inner loop to use the names as keys in the result.
foreach ($data as $item) {
// separate the names
$names = explode(', ', $item['name']);
// iterate the names and set/increase values for them in the result array
foreach ($names as $name) {
$result[$name]['name'] = $name;
$result[$name]['budget'] = $item['budget'] + ($result[$name]['budget'] ?? 0);
}
}
// remove the string keys if necessary
$result = array_values($result);
Hello good morning wherever you are :D, i have a lil problem, i have this code of arrays
$arrayToView is the info of every single user that i want.
$tagsArray are only tags that use every user but i need to merge all the info something like the last array...
$arrayToView = array(
'IVOFACUNDO' = array(
'mails' => 3,
'contacts' => 34,
'blocked' => 23
),
'ESRAYCU' = array(
'mails' => 23,
'contacts' => 124,
'blocked' => 44
)
)
And i have another one like this
$tagsArray= array(
'IVOFACUNDO' = array(
'14' => array(
'id' => 14,
'name' => 'php',
'value' => 1
),
'15' => array(
'id' => 15,
'name' => 'javascript',
'value' => 1
)
),
'ESRAYCU' = array(
'1' => array(
'id' => 1,
'name' => 'python',
'value' => 1
),
'15'=> array(
'id' => 15,
'name' => 'javascript',
'value' => 1
)
)
)
so the question is how i can merge both arrays obviously respectively with the same admin something like this
$arrayToView = array(
'IVOFACUNDO' = array(
'mails' => 3,
'contacts' => 34,
'blocked' => 23,
'tags' => array(
'14' => array(
'id' => 14,
'name' => 'php',
'value' => 1
),
'15' => array(
'id' => 15,
'name' => 'javascript',
'value' => 1
)
)
),
'ESRAYCU' = array(
'mails' => 23,
'contacts' => 124,
'blocked' => 44,
'tags' => array(
'1' => array(
'id' => 1,
'name' => 'python',
'value' => 1
),
'15'=> array(
'id' => 15,
'name' => 'javascript',
'value' => 1
)
)
)
)
The key 'tags' need to be created in the merge of every iteration to add and get one array with all the values, how i can do this?
You can try this snippet.
foreach($arrayToView as $key => $arr){
if(array_key_exists($key, $tagsArray)){
$arrayToView[$key]['tags'] = $tagsArray[$key];
}
}
echo '<pre>';print_r($arrayToView);echo '</pre>';
Use php inbuilt function
$result_Arr = array_merge_recursive($arrayToView,$tagsArray);
<?php
$arrayToView = array(
'IVOFACUNDO' => array(
'mails' => 3,
'contacts' => 34,
'blocked' => 23
),
'ESRAYCU' => array(
'mails' => 23,
'contacts' => 124,
'blocked' => 44
)
);
$tagsArray= array(
'IVOFACUNDO' => array(
'14' => array(
'id' => 14,
'name' => 'php',
'value' => 1
),
'15' => array(
'id' => 15,
'name' => 'javascript',
'value' => 1
)
),
'ESRAYCU' => array(
'1' => array(
'id' => 1,
'name' => 'python',
'value' => 1
),
'15'=> array(
'id' => 15,
'name' => 'javascript',
'value' => 1
)
)
);
foreach($arrayToView as $key => $value){
if(isset($tagsArray[$key])){
$arrayToView[$key]['tags'] = array();
foreach($tagsArray[$key] as $key2 => $value2){
$arrayToView[$key]['tags'][$key2] = $tagsArray[$key][$key2];
}
}
}
echo'<pre>';
print_r($arrayToView);
echo'</pre>';
?>
my main array name is $constant...
$constants = array(
'residential' => array(
"flat" => "Flat", "swimming_pool" => "Swimming pool",
"hall" => "Hall", "garden" => "Garden", "clubhouse" => "Clubhouse"
),'commercial' => array(
"shop" => "Shop", "office" => "Office"
),);
i can merge this array using array_merge like
$result = array_merge($constants['residential'],$constants['commercial']);
but i want to merge this array where i declare that array like..
$constants = array(
'residential' => array(
"flat" => "Flat", "swimming_pool" => "Swimming pool",
"hall" => "Hall", "garden" => "Garden", "clubhouse" => "Clubhouse"
),'commercial' => array(
"shop" => "Shop", "office" => "Office"
),
'test' => array_merge('residential','commercial'));
is that possible please help.....
No, this is not possible - you can't use values from the array that is just in the process of being declared, so the way to do it is similar to your first code snippet:
$constants = array(
'society_types' => array(
"residential"=>"Residential", "commercial"=>"Commercial", "resicumcomm" => "Residential cum Commercial"
),
'residential' => array(
"flat" => "Flat", "swimming_pool" => "Swimming pool", "hall" => "Hall", "garden" => "Garden", "clubhouse" => "Clubhouse"
)
);
$constants['test'] = array_merge($constants['society_types'], $constants['residential']);
I use the suggest wizard in TYPO3 backend.
The following code is in the tca:
'tx_db_colors' => array (
'exclude' => 0,
'label' => 'Farbe',
'config' => array (
"type" => "group",
"allowed" => "tx_db_colors",
"foreign_table" => "tx_db_colors",
"internal_type" => "db",
"size" => 1,
"minitems" => 0,
"maxitems" => 1,
'items' => array(array('', ''),),
'wizards' => array(
'suggest' => array(
'type' => 'suggest',
),
),
)
),
Is there a solution, to get matched records in substring of the label, not from scratch?
Example:
The records label is named 'coffee black'
When I type 'co' into the search field, the record will be shown.
'blac' won't match to any record.
Is this possible to find this record, when I type in a substring? Else I have to extend the autocompletion. TYPO3 Core, yuk! :-)
Thank you in advance!
After hours, I found the solution.
You have to write the tca like this:
'tx_db_colors' => array (
'exclude' => 0,
'label' => 'Farbe',
'config' => array (
"type" => "group",
"allowed" => "tx_db_colors",
"foreign_table" => "tx_db_colors",
"internal_type" => "db",
"size" => 1,
"minitems" => 0,
"maxitems" => 1,
'items' => array(array('', ''),),
'wizards' => array(
'suggest' => array(
'type' => 'suggest',
'default' => array(
'searchWholePhrase' => 1
),
),
),
)
),
Just add
'default' => array(
'searchWholePhrase' => 1
),
into the 'suggest' array.