Related
I have Apache 2.4.12 and php 5.6.9 on my Windows 8 computer and I'm trying to enable the curl extension for php however, I haven't had much success. After searching the internet for this issue it appears that other's have had the same trouble. Here are the suggestions I've found:
Uncomment ;extension=php_curl.dll in php.ini
Uncomment ;extension_dir = "ext" in php.ini
Download and replace the php_curl.dll file in the ext directory of php with one from this website
Add to the PATH environment variable where php is installed
Copy libeay32.dll and ssleay32.dll from where php is installed to C:\Windows\System32
I've tried every single suggestion with no success except the third item in the list because it doesn't have a .dll file for curl with php 5.6, in fact the highest version avaible is one for php 5.4. There has to be way to enable this extension without having to downgrade my php version to 5.4 and using a .dll file from that website. I've tried searching the internet for a .dll file like the one on the linked website for php 5.6 opposed to a version of php that's outdated but I've had no luck in finding one so I'd like help with this issue.
How can I enable curl for php 5.6 on my Windows 8 machine?
Locate your php folder and follow these instructions:
Move to Windows\system32 folder:
libssh2.dll, php_curl.dll, ssleay32.dll, libeay32.dll
Move to Apache24\bin folder
libssh2.dll
Uncomment extension=php_curl.dll
Note: Don't overwrite when prompted.
Source
I give you an example of a set up that just worked perfectly for me :
downloaded the VC11 x86 Thread Safe version of PHP,
unzipped it within a directory C:\php,
edited the php.ini-development, uncommenting 2 lines :
extension=php_curl.dll
extension_dir = "ext"
saved this file under php.ini.
I just tested it via the CLI (windows CMD here) on a PHP a file (i.e. C:\php\php myFile.php) and cURL worked.
If you have Apache installed and prefer to test it in a browser, you obviously have to adapt this installation with your own files structure and to do not forget to restart Apache.
Running apache service with a specific user other than local system solved the problem for me. You can test this easily by stopping the apache service and running manually <apache dir>\bin\httpd.exe.
I fixed this problem by adding C:\php and C:\php\ext to PATH system variables.
Press window + pause to bring up the System Properties page.
Click Advanced System Settings
Click Environment Variables
You'll see the Path variable in the System Variables box in the bottom.
Append your PHP path to that variable. Now the system will be able to load the extensions.
In addition to uncommenting the line
;extension_dir = "ext"
Try also setting it to the absolute path of the PHP installation's ext folder and then restarting apache.
e.g.:
extension_dir = "C:\PHP 5.6.19\ext"
I am having below error when I try to implement google and facebook authentication in windows 7 using wamp server.
Fatal error: Call to undefined function curl_init() in
E:\wamp\www\mysite\protected\extensions\eauth\EAuthServiceBase.php
on line 273
I am using,
wampserver 2.2
php version 5.3.13
I have enabled php_curl module as well. I checked in php.ini for confirm and it is uncommented as below.
;extension=php_bz2.dll
extension=php_curl.dll
;extension=php_dba.dll
The code has worked in ubuntu with xampp, but not in wamp in windows. I have done everything I can find. I have tried replacing the php_curl.dll also according to the comment on this thread, Call to undefined function curl_init() - with WAMP
My phpinfo() looks like below.
I have installed wamp in the partition E:\, but the "Configuration File (php.ini) Path" seems different, it is C:\Windows.
Please help me to fix the issue.
Visit this and have a file under Fixed curl extensions:
http://www.anindya.com/php-5-4-3-and-php-5-3-13-x64-64-bit-for-windows/
after download and replace related file then restart server.
In browser navigate to localhost and make sure there is curl extensions showing under Loaded Extensions :
For WAMP running PHP 5.4.3 on Windows 7 64 bit, make sure you use php_curl-5.4.3-VC9-x64.zip NOT php_curl-5.4.3-nts-VC9-x64.zip.
In windows 7 with PHP 5.5.31 after check that php_curl.dll extension is enabled (and still doesnt working), work for me to copy libeay32.dll and libssh2.dll from php directory to Apache bin.
just a guess - this section in php.ini does not reference the correct location
; Directory in which the loadable extensions (modules) reside.
extension_dir = *some value*
http://www.php.net/manual/en/ini.core.php#ini.extension-dir
edit
Also, look for this block in your phpinfo, if it's not there, curl isn't loading (obviously). You're not looking for matching version numbers - just for the block's existence.
edit
look at this question also
PHP and CURL under Windows 7 64 bits and Apache
When using WAMP..
You should have one file php.ini in the main PHP directory
In the php.ini enable the extension extension=php_curl.dll, by removing the ; char
The extension_dir must look like this example: extension_dir = "D:\AMP\PHP\ext\", so not a relative path
You need to restart Apache server only once. No need to restart it many times
Just make sure, you have the php_curl.dll in the ext directory
(windows 10 user)
Since this is the first result in Google and I had exactly the same problem and none of your solutions worked for me and I finally find the correct solution in an other thread of stackoverflow, I'll post link here :
EasyPHP Devserver 16.1 Curl Win 10
The solution is to add the your current PHP directory (depend of which version you use) to your global "path" variable in windows (like explained in the link, but you don't need to add all php directorias of course)
Not sure where to put my experience, hope it will be useful for someone.
In my case (win7 x64 + apache 2.4 + php 7.2), curl extension was enabled in php.ini but did not load. Resolved by replacing libs libssl-1_1-x64.dll and libcrypto-1_1-x64.dll in Apache's bin folder with the latest builds of OpenSSL
For those running PHP 7+ on windows, there is no php.ini file in the php directory by default.
You need to:
create a php.ini file in your PHP directory (it should be under C:\php\, or wherever your php directory is located)
Copy the content of either php.ini-development or php.ini-production into the php.ini file you've created.
Finally remove the semicolon (;) before extension=curl
Change the extention in php.ini file uncomment by removing ; like below
;extension=php_bz2.dll
extension=php_curl.dll
;extension=php_dba.dll
Then restart all services and it will work.
I'm trying to locate php_intl.dll and install it.
Does anyone have any tips?
For the php_intl.dll extension to work correctly, you need to have the following files in a folder in your PATH:
icudt36.dll
icuin36.dll
icuio36.dll
icule36.dll
iculx36.dll
icutu36.dll
icuuc36.dll
By default they're sitting in your PHP directory, but that directory isn't necessarily in your PATH (it wasn't for me, using xampp)
This has to be in your global path, not just your user's path. To set the global path, go to system info (windows key + PAUSE), then Advanced System Settings (Vista+) or Advanced (XP) and click the "Environment Variables" button and add the appropriate directory to the PATH variable in the System Variables list.
The packages at http://windows.php.net/download/ all contain the php\_intl.dll which is located in the subdir ext/.
All you have to do is to check if your extension_dir points to the right directory and add (or uncomment) the extension=php\_intl.dll directive.
I have XAMPP 1.8.3-0 and PHP 5.5.0 installed.
1) edit php.ini:
from
;extension=php_intl.dll
to
extension=php_intl.dll
Note: After modification, need to save the file(php.ini) as well as need to restart the Apache Server.
2) Simply copy all icu* * * *.dll files:
from
C:\xampp\php
to
C:\xampp\apache\bin
Then intl extension works!!!
Had the same issue ... I found the files needed by searching my drive for icu**.dll and found the ones listed above but with 46 instead of 36 in the php folder. I copy pasted them to the apache/bin file and tried starting apache and it finally started. On the Server Checks page it has now changed from Yellow Check to Green OK. Hope this helps.
If you read error message, "icuuc36.dll" is missing.
The problem is that you don't have the PHP dir in your PATH, or you can copy all "intl" files from php directory to apache\bin directory.
They are :
icudt36.dll
icuin36.dll
icuio36.dll
icule36.dll
iculx36.dll
icutu36.dll
icuuc36.dll
The package is already included in the extensions for PHP 7.2 and above and you just need to uncomment the following line in php.ini
extension=intl
I resolved this issue by adding PHP directory to PATH variable.
I just appended ;C:\xampp\php to Path variable in Windows Environment Variables.
For WampServer 2.5 (Apache 2.4.9 and PHP 5.5.12):
In default I've had php_intl enabled (you can enable it when you left click on the wamp icon in the system tray > PHP > PHP extensions and check if is it marked)
To have it properly working, I've had to copy:
C:\wamp\bin\php\php5.5.12\icu**51.dll
(total 8 files)
to
C:\wamp\bin\apache\apache2.4.9\bin
Then just restart the wamp and everything was just fine.
You can type this command in terminal: sudo apt-get install php-intl
I have PHP 5.3.1 and Apache
When I add the extension=php_intl.dll to php.ini and restart apache, it comes an alert that says "the requested operation has failed"
And this error on Event Monitor:
Faulting application name: httpd.exe, version: 2.2.14.0, time stamp: 0x4ac181d6
Faulting module name: php5ts.dll, version: 5.3.1.0, time stamp: 0x4b051b35
Exception code: 0xc0000005
The problem was some DLLs like icudt36.dll were missing (noticed with sysinternals ProcMon), I've downloaded php 5.3.1 zip version and extract all DLL's to PHP folder. That solved the problem.
When I faced this issue it was sorted out by using below mentioned steps:
Edit php.ini:
Make
;extension=php_intl.dll
to
extension=php_intl.dll
Simply copy all icu* * * *.dll files(any icu file with dll extension) from
C:\xampp\php to C:\xampp\apache\bin
Also If you have the msvcp110.dll missing file error. You have to download the right .dll or just go here http://www.microsoft.com/es-es/download/confirmation.aspx?id=30679 and install the vcredist_x64.exe and vcredist_x86.exe.
Now the intl extension should work :-)
I have IIS 7 and installed PHP using Microsoft Web Platform Installer on Windows 7. In IIS, go to PHP Manager in settings main page -> PHP Extensions -> Enable or Disable an Extension.
Intl extension is disabled by default.
I hope this helps
If you have the msvcp110.dll missing file error. You have to download the right .dll or just go here http://www.microsoft.com/es-es/download/confirmation.aspx?id=30679 and install the vcredist_x64.exe and vcredist_x86.exe, it worked for me.
There is a better way of doing this.
I was having same kind of problem with ldap, intl, curl php extensions. I've solved those issues by the following ways:
At first you've to check whether these extensions have been enabled in the php.ini file by removing semicolon (;) in front of the following lines:
;extension=php_intl.dll
;extension=php_ldap.dll
;extension=php_curl.dll
Now you can directly load those necessary dll files (ie libeay32, libssh2, ssleay32, icu**.dll ) from your httpd.conf (apache configuratio file) file. You don't have to do any other things like copying them to the apache's bin directory or php's ext directory. Just add them directly in you apache's httpd.conf file.
Please note that the followng example is for php version 5.5.x.
LoadFile "C:/php/icudt51.dll"
LoadFile "C:/php/icuin51.dll"
LoadFile "C:/php/icuio51.dll"
LoadFile "C:/php/icule51.dll"
LoadFile "C:/php/iculx51.dll"
LoadFile "C:/php/icutest51.dll"
LoadFile "C:/php/icutu51.dll"
LoadFile "C:/php/icuuc51.dll"
LoadFile "C:/php/libeay32.dll"
LoadFile "C:/php/libssh2.dll"
LoadFile "C:/php/ssleay32.dll"
That's it. Now, restart your apache or wamp and you're good to go.
In my case adding PHP directory to PATH in user environment didn't work. After some testing I've found that it should be added to system PATH (I don't know what's the name of this part of system setting windows, 'couse I have Polish Windows).
/Digger here/
Moving the icu*****.dll files to /ext/ seems to resolve the issue as well.
( If you specified the extension directory to be there of course )
In my xampp control panel, Click config to open php.ini
remove ; in
;extension=php_intl.dll
Then restart the apache.
Under php extensions in your wampserver, ensure intl is checked
check your extension_dir in your php/v7.0/php file ensure the directory is not commented and it is accurate
(Dont know if this contributed but i did all three)In your extension list in the same file as 2 above, include the intl file in the same format as the rest(if it is not included).
All the best
I was having trouble getting intl to run using PHP 7.1.7 and PhpStorm on Windows 10. Based on other answers here I could tell it was a PATH/DLL dependency problem but I couldn't seem to find all of the required files even after (re-)installing the Visual C++ Redistributable.
I eventually went searching my C: drive for vcr*.dll and found a copy of vcruntime140.dll in my C:\Program Files\Mozilla Firefox directory. So, in addition to making these changes to php.ini:
extension_dir = "ext"
extension=php_intl.dll
I also set my runtime PATH to ONLY the PHP directory (in my case, C:\Program Files\PHP\7.1.7) and the Firefox directory (above) and it FINALLY worked! I know it needs more than just the vcruntime140.dll but the other required DLLs must be in the FF directory too (there are a few dozen but I didn't bother to figure out which ones are essential).
You have to modify the php.ini file by removing the semi-colon on the line containing
extension=php_intl.dll
After this, go to the php folder of Xamp or Wamp or EasyPHP, copy every dll file containing
icu*,
Paste them inside your windows file.
That worked for me.
Configuration : EasyPHP Dev Server, Windows 10.
Update: The problem appears to have been corrupt DLLs somewhere in my PHP installation, or possibly a bug in PHP 5.2.9 on Win2k. I downloaded the windows (binaries-only) distribution of PHP 5.2.10 from php.net and extracted that to my c:\PHP directory. After doing that, everything worked fine.
Update2: I undid everything that I tried earlier (everything from the bulleted list below), except that I left "extension=php_curl.dll" uncommented in my php.ini file. It turns out that is all you should have to do in a proper installation.
I'm trying to get CURL to work on a Windows installation of PHP (version 5.2.9-2), and I am at wit's end. I have found the PHP CURL installation page, this SO question which references this page, and this SO question. I've tried most of the suggestions in all of those pages but I still get an error. Here is my very simple test page:
<?php
$ch = curl_init();
?>
<b>Success!</b>
This gives me:
Fatal error: Call to undefined function curl_init() in C:\ApacheRoot\curltest.php on line 2
In my Apache error log I get this each time the server starts:
PHP Warning: PHP Startup: Unable to load dynamic library 'C:\\PHP\\ext\\php_curl.dll' - The specified procedure could not be found.\r\n in Unknown on line 0
I have done the following:
Uncommented the following line in php.ini: extension=php_curl.dll
Copied ssleay32.dll and libeay32.dll from C:\PHP to C:\WINNT\System32
Downloaded cURL for Win32 from curl.haxx.se and extracted the .zip file to C:\cURL
Added C:\cURL to my system PATH environment variable.
Verified that:
php.ini includes extension_dir="C:\PHP\ext"
The directory C:\PHP\ext contains php_curl.dll
The only php.ini file on my system is in C:\PHP (i.e. especially that there is no C:\WINNT\php.ini)
The Apache httpd.conf file includes the line PHPIniDir "C:/PHP/"
I have also rebooted the machine (several times, in fact...).
You don't have to reboot the computer, just restart the apache and the php module will read the new ini.
Did you change the correct php.ini? In case of doubt
<?php echo 'php.ini: ', get_cfg_var('cfg_file_path'); ?>
can tell you.
Is there something in the error.log of the apache that indicates that something went wrong while loading php and the php_curl.dll?
Did you start the apache as a win32 service? If you did try to start it as a console application. Error messages will show up on the console then. Or start it as a service and take a look at the error.log file and the windows event log (start, run, eventvwr.msc /s).
edit:
"The specified procedure could not be found"
You need a dll that is compatible with your php version and build. Exactly what did you install and where did you get it from?
Try this:
Stop WAMP completely.
Find your WAMP folder: C:\Path\To\WAMP\bin\Apache\ApacheVersion\bin\
Edit that php.ini and uncomment extension=php_curl.dll
Restart WAMP.
That should hopefully solve it.
*EDIT: Do the same thing # C:\Path\To\WAMP\bin\php\PHPVersion\
This is what worked for me
Answered by Soren from another SO thread - CURL for WAMP
"There seems to be a bug somewhere. If you are experiencing this on Win 7 64 bit then try installing apache addon version 2.2.9 and php addon version 5.3.1 and switching to those in WAMP and then activating the CURL extension. That worked for me."
This fixed it for me:
Go to here:
http://www.anindya.com/php-5-4-3-and-php-5-3-13-x64-64-bit-for-windows/
Download 'php_curl-5.3.13-VC9-x64.zip'
Stop WAMP Server from Running
Extract the file 'php_curl.dll'.
On your local machine, browse to (or where your WAMP installation is found) c:\wamp\bin\php\php5.3.13\ext
Rename php_curl.dll to php_curl.dll.old (or whatever you choose) and then copy the new file into the above directory.
Restart WAMP Server
All should be working ok now.
I had the same problem with php-5.5.26-Win32-VC11-x64 (on Windows) and I tried everything listed here with no luck. Finally I got it working by adding PHP installation directory to windows Path.
With PHP 5.6.9 on Windows Server Core 2012 x64 cURL was not working, not showing up in phpinfo despite uncommenting php_curl.dll extension in my php.ini and restarting the Apache 2.4 service. Added the php path and the php\ext path to my $evn:path. No joy.
Fix: I didn’t need to download any other php_curl.dll file and couldn’t find one for PHP 5.6 anyway. What finally worked was to copy these three files into the Apache24\bin folder then restart Apache:
libeay32.dll
libssh2.dll
ssleay32.dll
Copying these to System or System32 was not needed.
If the problem persists after you uncomment the module from both php.ini files (that people are already talking about and which are located on apache folder and php folder) and even after you check that you got the php_curl.dll ** at
C:\WAMP\bin\php\php5.3.13\ext
YOU SHOULD TRY TO REPLACE THE ORIGINAL DLL THAT COMES WITH WAMPSERVER with one from this website:
http://www.anindya.com/php-5-4-3-and-php-5-3-13-x64-64-bit-for-windows/
My problem was there!
Hope it helps.
I am running a tweaked webmail application. However, for some reason the openssl extension isn't loading. I have enabled it in the php.ini, but when I run my application and check for loaded extensions using get_loaded_extensions, the openssl is not in the array of loaded extensions. What is wrong here? The php_openssl.dll is physically there - I am running a wampserver and it looks ok. But on the execution end it is not working.
Depending on how php_openssl.dll was built/linked it depends on libeay32.dll and/or ssleay32.dll. Windows must be able to (also) load those two .dlls into the process running php in order to make the php_openssl.dll available/functional.
Since windows searches for .dlls (amongst other places) in the directory of the executable try placing libeay32.dll and ssleay32.dll in the apache/bin directory (where the httpd.exe resides) and restart the webserver.
see also: Dynamic-Link Library Search Order
and How to use Dependency Walker
Have you tried restarting your apache server?
And is the DLL in the right place?
This may help you. Copy dll files in windows and windows/system32 folders and then restart Apache server.