i'm new to MySQL and PHP. And i have some problems trying to get data values from two tables in one query using JOIN. What i want to do is query "user_builds" and SUM(amount) where the owner_id=1 AND type=1. The problems comes in now where i have to grab the build_type from another table called "builds".
I have tried to solve this as i mentioned with JOIN, but the closest i came was to get the amount of rows that was equal to how many rows user_id=1 had.
What i want is select the total SUM of "amount"(user_builds) where "type=1"(builds) and "owner_id=1"(user_builds).
I hope you understand what i try to do here, if not i will try to elaborate it more. And also sorry for not providing any of the querys i tried, but as none of them worked it feels irrelevant. Thank you for your time.
Edit:
+-------------------+
| user_builds |
+---------+---------+----------+-------+
| id |owner_id | build_id | amount|
+---------+---------+----------+-------+
| 1 | 1 | 1 | 5 |
| 2 | 2 | 2 | 15 |
| 3 | 2 | 3 | 15 |
| 4 | 1 | 4 | 5 |
| 5 | 1 | 5 | 5 |
| 6 | 1 | 6 | 10 |
+---------+---------+----------+-------+
+----------------------+
| build |
+---------+------------+-----------+--------+
| id | name |description| type |
+---------+------------+-----------+--------+
| 1 | House | desc | 1 |
| 2 | Kitchen | desc | 2 |
+---------+------------+-----------+--------+
I want to query "user_builds" and get the total of "amount" where owner_id=1 and type=1. (type is found in "build" table).
Try this code, I hope it works appropriately.
select sum(ub.amount)
from user_builds ub
left join build b
on ub.build_id = b.id
where b.type=1
and ub.owner_id = 1
select SUM(amount) from user_builds left join builds on build.type = user_builds.type where "owner_id=1"
try this query and replace my query field with your original fields
best of luck...
Related
Ok, I have a single MySQL table with the name 'car' and 3 columns.
+----+--------+------------+
| ID | car_id | engine |
+----+--------+------------+
| 1 | 123 | on |
| 2 | 123 | on |
| 3 | 123 | off |
| 4 | 123 | on |
| 5 | 123 | on |
| 6 | 123 | on |
| 7 | 123 | off |
| 8 | 123 | on |
| 9 | 123 | off |
+----+--------+------------+
Now I want to show the trips this car did. The trips would be determined based on car engine start and stop. For example from the above example we can see that user has made 3 trips as total(From on to off). Now What I want is that if there is a query which gives me only 3 results from on to off meaning if somehow the query groups the records by considering a starting point on and ending point off. Is it possible in mysql? or the other way around is doing it manually by fetching all the records and working in arrays?
At the moment I am fetching all the records and doing it manually by looping all the data and doing accordingly But this process is slow.
Can you try it ?
SELECT * from cars WHERE `engine` = 'off' AND id IN(SELECT id+1 FROM `cars` WHERE `engine` = 'on')
Hello :) I am fairly new to using INNER JOIN and still trying to comprehend it's logic which I think I am sort of beginning to understand. After being across a few different articles on the topic I have generated a query for finding duplicates in my table of phone numbers.
My table structure is as such:
+---------+-------+
| PhoneID | Phone |
+---------+-------+
Very simple. I created this query:
SELECT A.PhoneID, B.PhoneID FROM T_Phone A
INNER JOIN T_Phone B
ON A.Phone = B.Phone AND A.PhoneID < B.PhoneID
Which returns the ID of a phone that matches another one. I don't know how to word that properly so here is an example output:
+---------+---------+
| PhoneID | PhoneID |
+---------+---------+
| 17919 | 17969 |
| 17919 | 22206 |
| 17919 | 23837 |
| 17920 | 17970 |
| 17920 | 22203 |
| 17920 | 23834 |
| 17921 | 17971 |
| 17921 | 22225 |
| 17921 | 22465 |
| 17921 | 24011 |
| 17921 | 24047 |
| 17922 | 17972 |
| 17922 | 22198 |
| 17922 | 23879 |
| 17923 | 17973 |
| 17923 | 22199 |
| 17923 | 23880 |
+---------+---------+
You can note that on the left there is repeating IDs, the phone number that matches will be on the right (These are just the IDs of said numbers). what I am trying to accomplish, is to actually change a join table relative to the ID on the right. The join table structure is as such:
+----------+-----------+
| T_JoinID | T_PhoneID |
+----------+-----------+
Where T_JoinID is a larger object with a collection of those T_PhoneIDs, hence the join table. What I want to do is take a row from the original match query, and find the right side PhoneID in the join table, then update that item in the Join to be equal to the left side PhoneID. Repeating this for each row.
It's sort of a way to save space and get rid of matching numbers, I can just point the matching ones to the original and use that as a reference when I need to retrieve it.
After that I need to actually delete the original numbers that I reset the reference for but... This seems like a job for 2 or 3 different queries.
EDIT:
Sorry I know I didn't include enough detail. Here is some additional info:
My exact table structure is not the same as here but I am only using the columns that I listed so I didn't consider the fact that any of the others would matter. Most of the tables have a unique ID that is auto incremented. The phone table has carrier, type, ect columns. The additional columns I felt were irrelevant to include, but if there is a solution that includes the auto incremented ID of each table, let me know :) Anyway, I sort of found a solution, using multiple queries though I am still interested to learn and apply knowledge based on this question. So I have a that join table that I mentioned. It might look something like this for the expected results. There is a before and after table in one sorry for poor formatting.
+--------------------+---------+----------+---------+
| Join Table Results | | | |
+--------------------+---------+----------+---------+
| Before | | After | |
| Join | Table | Join | Table |
| PersonID | PhoneID | PersonID | PhoneID |
| 1 | 1 | 1 | 1 |
| 1 | 2 | 1 | 2 |
| 1 | 3 | 1 | 3 |
| 2 | 4 | 2 | 1 |
| 2 | 5 | 2 | 5 |
| 2 | 6 | 2 | 6 |
| 3 | 7 | 3 | 5 |
| 3 | 8 | 3 | 5 |
| 3 | 9 | 3 | 5 |
| 3 | 10 | 3 | 8 |
| 3 | 11 | 3 | 9 |
+--------------------+---------+----------+---------+
So you can see that in the before columns, 7, 8, and 9 would all be duplicate phone numbers in the PhoneID - PhoneID relationship table I posted originally. After the query I wanted to retrieve the duplicates using the PhoneID - PhoneID comparison and take the ones that match, to change the join table in a way that I have shown directly above. So 7, 8, 9 all turn to 5. Because 5 is the original number, and 7, 8, 9 coincidentally were duplicates of 5. So I am basically pointing all of them to 5, and then deleting what would have been 7, 8, 9 in my Phone table since they all have a new relationship to 5. Is this making sense? xD It sounds outrageous typing it out.
End Edit
How can I improve my query to accomplish this task? Is it possible using an UPDATE statement? I was also considering just looping through this output and updating each row individually but I had a hope to just use a single query to save time and code. Typing it out makes me feel a tad obnoxious but I had hope there was a solution out there!
Thank you to anyone in advance for taking your time to help me out :) I really appreciate it. If it sounds outlandish, let me know I will just use multiple queries.
i am trying to build something like an order management tool for a car garage.
The main function of the tool is to manage repair orders and inspection orders as well
Therefore i have created this following three tables.
In the first one you can see the cars and the state of the repair and inspection.
The second one shows the information about the single repair orders the relation between the first and this is 1:n.
The last one shows the automaticly created inspection orders for each car out of the first table. This is an 1:n relation as well.
So what i try to do is to show all the open repair and inspection orders for the cars in one table. But only the open ones.
I tried it with some where statements but i got totaly confused.
My question is, how i can realise it?
+------+--------------------------+----------+------------+
| IDWZ | wz_name | wz_stand | wz_vistand |
+------+--------------------------+----------+------------+
| 1 | Querbr?cke vorn | 0 | 0 |
| 2 | Front Lateral Support | 0 | 1 |
| 3 | Rear Support | 1 | 1 |
| 4 | MID-X-Member Upper Shell | 1 | 1 |
| 5 | Front Lateral Support | 1 | 1 |
+------+--------------------------+----------+------------+
+---------+-----------------+--------------+
| IDWZTBL | rep_wzrepstatus | rep_wzfehler |
+---------+-----------------+--------------+
| 2 | 1 | REP 1 |
| 1 | 1 | REp2 |
| 1 | 1 | REp 3 MASS |
| 1 | 0 | 444 |
| 2 | 0 | |
+---------+-----------------+--------------+
+--------+-------------+
| VIWZID | vi_repstand |
+--------+-------------+
| 1 | 0 |
+--------+-------------+
Sry for that!
So the IDWZ is the foreign KEY in the second table(IDWZTBL) and in the third (VIWZID).
I tried it with
SELECT wz_name, wz_stand, wz_vistand, rep_wzrepstatus, vi_repstand FROM tbl_wz LEFT JOIN tbl_orders ON tbl_wz.IDWZ = tbl_orders.IDWZTBL LEFT JOIN tbl_vi ON tbl_wz.IDWZ = tbl_vi.VIWZID WHERE wz_stand='0' AND rep_wzrepstatus='0' ...
Only for the first table cars to the second one repair orders, that WHERE staement (WHERE wz_stand='0' AND rep_wzrepstatus='0') works fine.
But if i try to add the third table (VI) doing the same, i could fetch the result i wanna have.
What i wanna see in the Overview table is only the last open repair order and the last open inspection order.
I'm trying to build a query with Doctrine, but i'm not sure if it can be done.
What i need is to get a result displaying the ID of a Requested Item and its SUM of Quantity already fulfilled.
I have four tables:
Request
RequestItems
Order
OrderItems
I can create a Request and assign one or more Items to this Request which are stored at RequestItems, then i need to create an Order to this Request, the Order must aim to fulfill the Requested Items, but it might be with a single Order or Multiple ones, therefore each Order contains one or many items which are stored at OrderItems.
The following is an example of tables:
Request
| ID | Date |
|----|------------|
| 1 | 2014-05-12 |
| 2 | 2014-05-13 |
RequestItems
| ID | RequestID | Name |Qtty |
|----|-----------|---------------------|-----|
| 1 | 1 | 60W Light Bulb | 5 |
| 2 | 1 | Bticino switch | 3 |
| 3 | 2 | 60W Light Bulb | 10 |
| 4 | 2 | 80W Light Bulb Warm | 15 |
Order
| ID | RequestId | Date | State |
|----|-----------|------------|-------|
| 1 | 1 | 2014-05-14 | 1 |
| 2 | 1 | 2014-05-15 | 1 |
| 3 | 2 | 2014-05-15 | 1 |
| 4 | 2 | 2014-05-16 | 1 |
| 5 | 2 | 2014-05-17 | 1 |
OrderItems
| ID | RequestItemsID | OrderID | Qtty |
|----|----------------|---------|------|
| 1 | 1 | 1 | 5 |
| 2 | 2 | 2 | 3 |
| 3 | 3 | 3 | 2 |
| 4 | 3 | 4 | 2 |
| 5 | 3 | 5 | 1 |
| 6 | 4 | 5 | 10 |
Here i have two Requests:
No. 1: Have two items requested (5 60W light bulbs, 3 Bticino switches)
No. 2: Have one item requested (10 60W light bulbs, 15 80W warm light bulbs)
For these requests i have created 5 Orders, two of them to fulfill first request and 3 to fulfill second request.
The first two Orders have addressed the first request and provided the requested items so first request should be completed.
The last three Orders are addressing the second Request and have provided already 5 of the 10 60W light bulbs and 10 of the 80W warm light bulbs.
What i need here is to get the ID and Quantity of the RequestItems and The SUM of Qtty on OrderItems grouped by the RequestItem ID and filtered by the Order State and Request ID
As a sample i need to get how many RequestedItems where requested and have already been ordered for the Request No. 2 where its Order State is 1
| RequestItemsID | QttyRequested | QttyOrdered (SUM) |
|----------------|---------------|-------------------|
| 3 | 10 | 5 |
| 4 | 15 | 10 |
This result groups requested items by its ID and return the Requested Quantity, also SUM the already ordered ammounts of OrderItems for this RequestItem
Given this result i can calculate pending items also.
I've managed to solve this issue building two Queries one to get RequestedItems and one to get OrderedItems and matching these two with PHP but i think it is possible to do this on the database side.
If anyone can help me with this it would be much appreciated.
Thanks.
UPDATE #1:
I have issues with subqueries inside a join when using the QueryBuilder, but i managed to build a working query, adding the subquery in the join condition.
I'm adding my working query below but i still need to do multiple checks to see if it is really my answer.
You can get the example result by executing
SELECT ri.ID AS RequestItemsID, ri.Qtty AS QttyRequested,
SUM(oi.qtty) AS QttyOrdered
FROM RequestItems ri
INNER JOIN Order AS o ON o.RequestId = ri.RequestId
INNER JOIN OrderItems AS oi ON oi.OrderId = o.ID
WHERE ri.RequestId = 2 AND o.State = 1
GROUP BY ri.RequestId, o.State
It seems Doctrine doesnt support subqueries in the JOIN part of the query but i managed to add a subquery in the condition part of my JOIN.
Based on https://groups.google.com/forum/#!topic/doctrine-user/0rNbXlD0E_8 this can be solved with IN(SUBQUERY)
This is what is working right now given the example in the OP
SELECT ri.ID AS RequestItemsID, ri.Qtty AS QttyRequested, COALESCE(SUM(oi.Qtty), 0) AS QttyOrdered
FROM RequestItems AS ri
LEFT JOIN OrderItems AS oi ON oi.RequestItemsID = ri.ID AND oi.OrderID IN (
SELECT o.ID FROM Order AS o WHERE o.State = 1 AND o.RequestID = 2
)
WHERE ri.RequestID = 2
GROUP BY ri.ID;
i have a table in following format:
id | title
---+----------------------------
1 | php jobs, usa
3 | usa, php, jobs
4 | ca, mysql developer
5 | developer
i want to get the most popular keywords in title field, please guide.
If you have a list of keywords, you can do the following:
select kw.keyword, count(*)
from t cross join
keywords kw
on concat(', ', t.title, ',') like concat(', ', kw.keyword, ',')
As others have mentioned, though, you have a non-relational database design. The keywords in the title should be stored in separate rows, rather than as a comma separated list.
If your data is small (a few hundred thousand rows or less), you can put it into Excel, use the text-to-columns function, rearrange the keywords, and create a new, better table in the database.
SELECT title 1, COUNT(*) FROM table GROUP BY title 1
EDIT
Since you've edited and presented a non-normalized table, I would recommend you normalize it.
Have a read of: http://blog.fedecarg.com/2009/02/22/mysql-split-string-function/
You need to modify your database. You should have something like this:
items
+----+---------------+
| id | title |
+----+---------------+
| 1 | something |
| 3 | another thing |
| 4 | yet another |
| 5 | one last one |
+----+---------------+
keywords
+----+-----------------+
| id | keyword |
+----+-----------------+
| 1 | php jobs |
| 2 | usa |
| 3 | php |
| 4 | jobs |
| 5 | ca |
| 6 | mysql developer |
| 7 | developer |
+----+-----------------+
items_to_keywords
+---------+------------+
| item_id | keyword_id |
+---------+------------+
| 1 | 1 |
| 1 | 2 |
| 3 | 2 |
| 3 | 3 |
| 3 | 4 |
| 4 | 5 |
| 4 | 6 |
| 5 | 7 |
+---------+------------+
Do you see the advantage? The ability to make relations is what you should be leveraging here.