I was trying to find any information about using Memcached with PHP7, but I failed. The only valuable information is short Readme.md of php-memcached repo.
Unfortunately, its travis build failed as well as 30/126 tests on my machine.
However make install command was successful and created memcached.so file. Does it mean I can use this extension in production or it still has bugs and is not recommended for using?
I will very appreciate any advice or working solution.
You need to use the php7 branch; see here, Travis is passing.
This should be the complete set of steps to install the memcached extension on a Debian/Ubuntu OS:
sudo apt-get update
sudo apt-get install -y libmemcached-dev libmemcached11 git build-essential
git clone https://github.com/php-memcached-dev/php-memcached
cd php-memcached
git checkout php7
git pull
/usr/local/php7/bin/phpize
./configure --with-php-config=/usr/local/php7/bin/php-config
make
sudo make install
You may need to change some of the paths if you have them installed at different locations.
To install memcached on the latest ubuntu for the latest php use:
sudo apt-get install php-memcached
For Debian 8 users, you can use:
sudo apt-get install php7.0-memcached
I came to this question via an issue with getting artisan to work in the Laravel Lumen framework.
I'm using PHP 7. PHP 7.0.15-0ubuntu0.16.04.4 to be precise.
I found the only solution was to install what appears to be the PHP 5 version* with memcached†:
sudo apt install memcached php-memcached
*
php-memcached/xenial,now 2.2.0-51-ge573a6e+2.2.0-2build2 amd64 [installed]
memcached extension module for PHP5, uses libmemcached
† If you find you then get the error: [RuntimeException] Could not establish Memcached connection., you need to install the memcached extension as the above sudo apt install memcached (if you're on 16.04+, use apt-get if < 16.04)
Related
I have been meaning to install ffmpeg as an extension to my PHP setup. So before I can install it, I need to phpize it. I installed php5-dev by sudo apt-get install php5-dev. But now when I run phpize I get the following error :
phpize
Cannot find config.m4.
Make sure that you run '/usr/bin/phpize' in the top level source directory of the module
The location of my php.ini is /usr/local/zend/etc/php.ini
From another online resource I tried this
sudo apt-get install autoconf automake libtool m4
But all of them are already installed.
Locate config.m4 didn't return anything.
Any pointers here how I can get phpize and thus, ffmpeg up and running?
For recent versions of Debian/Ubuntu (Debian 9+ or Ubuntu 16.04+) install the php-dev dependency package, which will automatically install the correct version of php{x}-dev for your distribution:
sudo apt install php-dev
Older versions of Debian/Ubuntu:
For PHP 5, it's in the php5-dev package.
sudo apt-get install php5-dev
For PHP 7.x (from rahilwazir comment):
sudo apt-get install php7.x-dev
RHEL/CentOS/yum
yum install php-devel # see comments
For PHP7 Users
7.1
sudo apt install php7.1-dev
7.2
sudo apt install php7.2-dev
7.3
sudo apt install php7.3-dev
7.4
sudo apt install php7.4-dev
If not sure about your PHP version, simply run command php -v
Ohk.. I got it running by typing /usr/bin/phpize instead of only phpize.
Under Redhat Enterprise / CentOS, use yum to install the php-devel module:
yum install php-devel
For PHP 7, you need:
yum install php70-php-devel
Step - 1: If you are unsure about the php version installed,
then first run the following command in terminal
php -v
Output: the above command will output the php version installed on your machine, mine is 7.2
PHP 7.2.3-1ubuntu1 (cli) (built: Mar 14 2018 22:03:58) ( NTS )
Copyright (c) 1997-2018 The PHP Group
Zend Engine v3.2.0, Copyright (c) 1998-2018 Zend Technologies
with Zend OPcache v7.2.3-1ubuntu1, Copyright (c) 1999-2018, by Zend Technologies
Step 2: Then to install phpize run the following command, Since my php version is 7.2.3. i will replace it with 7.2, so the command will be,
sudo apt-get install php7.2-dev
Step 3: Done!
Alternate method(Optional):
To automatically install the phpize version based on the php version installed on your machine run the following command.
sudo apt-get install php-dev
This command will automatically detect the appropriate version of php installed and will install the matching phpize for the same.
Hmm... actually i dont know how this solved it? But the following steps solved it for me:
find / -name 'config.m4'
Now look if the config.m4 is anywhere in a folder of that stuff you want to phpize. Go to that folder and run phpize directly in there.
For ubuntu 14.04LTS with php 7, issue:
sudo apt-get install php-dev
Then install:
pecl install memcache
In Ubuntu 16.04, you can install phpize with the command
aptitude install php7.1-dev // for php 7.1
which is equivalent to
apt-get install php7.1-dev // for php 7.1
If you're having problems with phpize not found on CentOS7.x after you have installed the relevant devel tools for your version/s of PHP, this path finally worked for me:
For PHP 7.2.x
/opt/cpanel/ea-php72/root/usr/bin/phpize
For PHP 7.3.x
/opt/cpanel/ea-php73/root/usr/bin/phpize
For PHP 7.4.x
/opt/cpanel/ea-php74/root/usr/bin/phpize
Run this in your folder containing the downloaded PHP extension, for example in line 3 below:
Example based on installing the PHP v7.3.x Brotli Extension from https://github.com/kjdev/php-ext-brotli
git clone --recursive --depth=1 https://github.com/kjdev/php-ext-brotli.git
cd /php-ext-brotli
/opt/cpanel/ea-php73/root/usr/bin/phpize
./configure --with-php-config=/opt/cpanel/ea-php73/root/usr/bin/php-config
make
make test
Install from linux terminal
sudo apt-get install <php_version>-dev
Example :
sudo apt-get install php5-dev #For `php` version 5
sudo apt-get install php7.0-dev #For `php` version 7.0
Of course in PHP7.2
sudo apt-get install php7.2-dev
This might help someone on ubuntu. No promises.
sudo apt-get install libcurl3 php5-dev libcurl4-gnutls-dev libmagic-dev
sudo apt-get install php-http make
sudo pecl install pecl_http
And adding "extension=http.so" to php.ini (Normally located at /etc/php5/apache2/php.ini)
Then restart Apache (sudo service apache2 restart).
If in doubt, check your apache logs:
sudo su --
cd /var/log/apache2
tail -25 error.log
Is http.so starting or failing?
For instance, if you wanted to use the "phpize" command for PHP 5.6, you would use the full path:
Code:
/opt/cpanel/ea-php56/root/usr/bin/phpize
For ubuntu with Plesk installed run apt-get install plesk-php56-dev, for other versions just change XX in phpXX (without the dot)
Go to the downloaded folder and there you find config.m4. Open the terminal and run phpsize.
I had this exact problem on macOS in 2018.
For me, first running brew install php before sudo pecl install mongodb did the trick.
You didn't specify what operating system you're using, and 90% of the answers assume Ubuntu/Debian Linux because of the apt-get install autoconf automake libtool m4 command that you posted (and over half expect you to be running CPanel), so I'm giving you a slightly more generic solution which ought to work on any Un*x clone (including Microsoft's WSL!).
You will need at least a few prerequisites:
A working C/C++ compiler — GCC or clang being the most popular options these days.
A 'developer edition' of PHP, which some package managers call 'development headers'. In the case of aptitude, as shown on the other answers, you ought to be fine with just sudo apt install php-dev. Beware of the mentioned caveats: you might end up with a slightly more unstable version of PHP which might not be updated correctly with future versions.
These days (that's late 2021 for me!), for those running Ubuntu, and wishing to seriously tinker with PHP, the recommendation is to use Ondřej Surý's personal package archive for PHP. Ondřej keeps his PPA always up to date, sometimes within a few hours after release; he keeps up with the latest four Ubuntu distributions and all the currently supported PHP versions that haven't reached end-of-life status yet (sorry, PHP5 is considered completely obsolete and plagued with unpatched bugs and security issues, so it's not supported — for very good reasons!); and he provides a lot of PHP extensions, too. Sadly, ffmpeg-php is not one of them...
There is a good reason for the overall lack of support of ffmpeg-php. Allegedly, the original repository for that was hosted at Sourceforge but has been abandoned in 2007. The recommended package these days is PHP-FFMpeg which is constantly being updated, and ought to be easily installed using composer — get it before starting your compilation!
Alternatively, instead of relying on an external non-official PHP extension (albeit one that is both popular and updated regularly!), you ought to launch the ffmpeg binary using shell_exec(). This is the officially recommended approach, mostly because converting videos always takes a long time, and the authors of that recommendation suggest a simple architecture where the PHP script basically launches ffmpeg in the background, accepting batches of videos for processing. The page is a bit old, but the technique shown is sound.
I am using XAMPP on Linux mint and it is by default installed if your don't have
sudo apt-get install php7.0-dev
// or
sudo apt-get install php-dev
know more
I am using Ubuntu 17 with php 7.1 and am trying to install Laravel 5.5 but it is telling me to check the minimum requirements.
I can't install the recommended php extensions. I am using sudo add-apt-repository ppa:ondrej/php but it appears the extension are not there and there is a mismatch from the repo
Repository 'http://ppa.launchpad.net/ondrej/php/ubuntu artful InRelease' changed its 'Label' value from '***** The main PPA for PHP (5.6, 7.0, 7.1) with many PECL extensions *****' to '***** The main PPA for supported PHP versions with many PECL extensions *****'
Your composer should say what extensions you need.
You also check doc https://laravel.com/docs/master#installation
PHP >= 7.0.0
OpenSSL PHP Extension
PDO PHP Extension
Mbstring PHP Extension
Tokenizer PHP Extension
XML PHP Extension
sudo apt-get install curl php-curl php-mcrypt php-mbstring php-gettext
Install PHP 7.1 on Ubuntu
Use the following set of commands to add PPA for PHP 7 in your Ubuntu system and install it.
> sudo apt-get install python-software-properties
> sudo add-apt-repository ppa:ondrej/php
> sudo apt-get update
> sudo apt-get install -y php7.1
Now use the following command to check installed php version on your system.
> php -v
Install PHP 7 Modules/Extensions
Find all the available PHP 7 modules using the following command:
> sudo apt-cache search php7-*
Install required PHP extensions using the following command
> sudo apt-get install <extension-name>
You can install multiple extensions using the same command. Separate extension names by a space.
For example
> sudo apt-get install php7.1-xml php7.1-xmlrpc php7.1-zip
Laravel 5.5 System Requirements Checker
To verify system requirements for Laravel 5.5 you can then use the following simple app.
https://github.com/mitesh1409/laravel-system-requirements-checker
Do git clone of this repo inside your server's root directory and then execute it.
For example using Apache server on Ubuntu 16.04, do git clone of this repo inside "var/www/html". It will create an app folder named "laravel-system-requirements-checker". Now you can run this using the url "http://localhost/laravel-system-requirements-checker/".
I hope this will help everyone starting development on Laravel 5.5.
Thanks.
Laravel-Requirement-Checker from browser
https://github.com/hosamalzagh/Laravel-Requirement-Checker
I installed php7/apache2.4/mysql5.6 via this script, but it turns out that the extensions xsl and intl are missing (need them to run Magento2).
I'm using Ubuntu 14.04.
If it is for dev purposes only, the easiest way would be use a PPA like ppa:ondrej/php-7.0 and then apt-get install php7.0-intl and apt-get install php7.0-xsl. PPAs should NEVER be used in production.
You can run sudo apt-get install php7.0-intl to get it installed.
You dont need PPA adding on 16.10 .
1st you need to add ppa repository to server
this can be done by :
sudo add-apt-repository ppa:ondrej/php
when PPA repo installed, update the local package cache by :
sudo apt-get update
after this you need to run following command to install intl & xsl extensions
sudo apt-get install php7.0-intl
sudo apt-get install php7.0-xsl
check the php extensions by :
php -m
if the extension does load on browser , than you need to check your php.ini for apache2
that can be found by calling <?php phpinfo();?> in info.php file
I want to install the v8js extension for PHP5.5 on Ubuntu 12.04 but can't make it working.
When I try to install the v8js extension version 0.2.0 (latest) with PECL, I have this message:
configure: error: libv8 must be version 3.24.6 or greater
ERROR: `/tmp/pear/temp/v8js/configure --with-v8js' failed
If I try to install an old version, I have a compilation error. This message is very similar to my issue: Install v8js for php on ubuntu
How can I fix this issue?
EDIT: I couldn't install it on Ubuntu 14.04 with PHP5.5, even with a PHP downgrade with PHPbrew to PHP 5.4. However, using Ubuntu 12.04 with PHP 5.4 works great. I didn't try the downgrade from PHP 5.5 to 5.4 on Ubuntu 12.04.
in case you can't find libv8-dev or libv8-dbg, you can find the correct version by run command
~$ apt-cache search libv8
libv8-3.14-dbg - V8 JavaScript engine - debugging symbols
libv8-3.14-dev - V8 JavaScript engine - development files for 3.14 branch
libv8-3.14.5 - V8 JavaScript engine - runtime library
libv8-dev - V8 JavaScript engine - development files for latest branch
then you can run
~$ sudo apt-get install libv8-3.14-dev libv8-3.14-dbg g++ cpp
then you can try to install v8js via pecl by running
~$ sudo pecl install v8js-0.2.0
if that command return error like this
configure: error: libv8 must be version 3.24.6 or greater
ERROR: `/tmp/pear/temp/v8js/configure --with-v8js' failed
you can try to install v8js-0.1.3 instead by running
~$ sudo pecl install v8js-0.1.3
then edit your php.ini to add v8js extension
~$ echo "extension=v8js.so" >> /etc/php5/cli/php.ini
Open your terminal/console
sudo apt-get install libv8-dev libv8-dbg g++ cpp
Make an update sudo apt-get update
Try sudo pecl install v8js-0.2.0 (or other version i.e.: sudo pecl install v8js-0.1.3)
Edit your php.ini (Check: Where is my php.ini file?) file by adding: extension=v8js.so.
Restart server
If it the extension still doesn't work, try to edit /etc/php5/conf.d/v8js.ini and add extension=v8js.so and restart server again.
Hope this helps.
These other answers work well and I used v8js-0.1.3 for the past 1.5 years but after needing to upgrade to PHP 7 I needed a better solution as v0.1.3 doesn't compile with PHP 7 (something to do with php_smart_str being renamed to php_smart_string).
After a couple hours of frustrating research and compiling libv8 myself, I didn't want to have to go through this whole process on every server I provisioned.
Anyway, I found this site which points you to a launchpad PPA site that provides a couple different ubuntu packages with the 5.1 and 5.2 libv8 libraries.
I ran these commands (please don't add repositories of 3rd party devs without understanding the risks).
sudo apt-add-repository ppa:pinepain/libv8-5.2
sudo apt-get update
sudo apt-get install libv8-5.2-dev
sudo pecl install v8js-1.1.0
(Thanks #JeyKeu for suggesting to add "apt-get update" to these commands)
I couldn't get v8js-1.3.0 or 1.2.0 to build, but 1.1.0 worked well. I checked the changelog and found that the latest updates are not necessary in my circumstance anyway.
I'm trying to install Facebook PHP SDK with Composer. This is what I get
$ composer install
Loading composer repositories with package information
Installing dependencies (including require-dev)
Your requirements could not be resolved to an installable set of packages.
Problem 1
- Installation request for facebook/php-sdk dev-master -> satisfiable by facebook/php-sdk[dev-master].
- facebook/php-sdk dev-master requires ext-curl * -> the requested PHP extension curl is missing from your system.
Problem is, I have curl extension enabled (uncommented in php.ini). When I run phpinfo(), it says it's enabled.
Only clue I have is that when I run $ php -m, 'curl' line is missing but I don't know what to do about it.
I have wamp 2.4 on Win8 and I'm running composer in cmd.exe.
This is caused because you don't have a library php5-curl installed in your system,
On Ubuntu its just simple run the line code below, in your case on Xamp take a look in Xamp documentation
sudo apt-get install php5-curl
For anyone who uses php7.0
sudo apt-get install php7.0-curl
For those who uses php7.1
sudo apt-get install php7.1-curl
For those who use php7.2
sudo apt-get install php7.2-curl
For those who use php7.3
sudo apt-get install php7.3-curl
For those who use php7.4
sudo apt-get install php7.4-curl
For those who use php8.0
sudo apt-get install php8.0-curl
Or simply run below command to install by your version:
sudo apt-get install php-curl
This worked for me: http://ubuntuforums.org/showthread.php?t=1519176
After installing composer using the command curl -sS https://getcomposer.org/installer | php just run a sudo apt-get update then reinstall curl with sudo apt-get install php5-curl. Then composer's installation process should work so you can finally run php composer.phar install to get the dependencies listed in your composer.json file.
on php7 run for example:
> sudo apt-get install php-curl
> sudo apt-get install php-mbstring
for every missing extension. Then:
> sudo apt-get update
and finally (in the project's root folder):
> composer install
As Danack said in comments, there are 2 php.ini files. I uncommented the line with curl extension in the one in Apache folder, which is php.ini used by the web server.
Composer, on the other hand, uses php for console which is a whole different story. Php.ini file for that program is not the one in Apache folder but it's in the PHP folder and I had to uncomment the line in it too. Then I ran the installation again and it was OK.
I ran into the same issue trying to install Dropbox SDK.
CURL was indeed enabled on my system but this meant by the php.ini in the wamp\bin\apache folder.
I simply had to manually edit the php.ini situated in wamp\bin\php, uncomment the extension=php_curl.dll line, restart Wamp and it worked perfectly.
Why there are those 2 php.ini and only one is used is still a mystery for me...
Hope it's helpul to someone!
I had this problem after upgrading to PHP5.6. My answer is very similar to Adriano's, except I had to run:
sudo apt-get install php5.6-curl
Notice the "5.6". Installing php5-curl didn't work for me.
For anyone who encounters this issue on Windows i couldn't find my answer on google at all.
I just tried running composer require ext-curl and this worked.
Alternatively add the following in your composer.json file:
"require": {
"ext-curl": "^7.3"
}
According to https://github.com/composer/composer/issues/2119 you could extend your local composer.json to state that it provides the extension (which it doesn't really do - that's why you shouldn't publicly publish your package, only use it internally).
I ran into a similar issue when trying to get composer to install some dependencies.
It turns out the .dll my version of Wamp came with had a conflict, I am guessing, with 64 bit Windows.
This url has fixed curl dlls: http://www.anindya.com/php-5-4-3-and-php-5-3-13-x64-64-bit-for-windows/
Scroll down to the section that says: Fixed Curl Extensions.
I downloaded "php_curl-5.4.3-VC9-x64.zip". I just overwrote the dll inside the wamp/bin/php/php5.4.3/ext directory with the dll that was in the zip file and composer worked again.
I am running 64 bit Windows 8.
Hope this helps.
if use wamp go to:
wamp\bin\php\php.5.x.x\php.ini
find:
;extension=php_curl.dll
remove (;)
Enable in php 7 try below command
sudo apt-get install php7.0-curl
Not sure why an answer with Linux commands would get so many up votes for a Windows related question, but anyway...
If phpinfo() shows Curl as enabled, yet php -m does NOT, it means that you probably have a php-cli.ini too. run php -i and see which ini file loaded. If it's different, diff it and reflect and differences in the CLI ini file. Then you should be good to go.
Btw download and use Git Bash instead of cmd.exe!
I have Archlinux with php 7.2, which has Curl integrated, so no amount of configuration voodoo would make Composer see ext-curl, that PHP could see and work with happily. Work around is to use Composer with --ignore-platform-reqs.
eg composer update --ignore-platform-reqs
Reference = https://github.com/composer/composer/issues/1426
try install php5-curl by using below snippet.
sudo apt-get install php5-curl
if it won't work try below code i m sure it will work fine.
sudo apt-get install php-curl
for me it worked... all the best :)
In my case I moved from PHP5 to PHP7 and I ve got this error,
Simply go to your /bin/php/php7/php.ini , then uncomment extension=php_curl.dll and restart your server, re-run your composer install.
If you getting error like php7.2-curl doesn't have installable candidate or not locate any package or dependencies is php7.2-common Or libcurl3 Do this
You have to tackle in mature way. Install aptitude these ubuntu package manager will finds all dependencies, and will install one by one.
apt-get install aptitude
Now you have to check if aptitude can download it or not if download it follow instructions
sudo aptitude install php7.2-curl
If you have gotten any error like this
E: Unable to locate package php7.2-curl
E: Couldn't find any package by glob 'php7.2-curl'
Any type on error i'm not talking about proper these errors
Try to add php package again
sudo apt-add-repository ppa:ondrej/php
sudo apt-get update
Now try this command
sudo aptitude install php7.2-curl
Aptitude will ask you you want to keep current version of all dependencies
The following actions will resolve these dependencies:
Keep the following packages at their current version:
1) php7.2-curl [Not Installed]
Accept this solution? [Y/n/q/?]
Type n then Enter
Aptitude will find all dependencies and ask you to install all package type
y
Again
y
Then
systemctl restart apache2
For centos of rhel
systemctl restart httpd
It will Not enabling PHP 7.2 FPM by default.
NOTICE: To enable PHP 7.2 FPM in Apache2 do
a2enmod proxy_fcgi setenvif
a2enconf php7.2-fpm
This method is not only for this error you can find any of php apache2 or ubuntu system package solution using aptitude.
Upvote if you find your solution
If you are ubuntu, this will work for you.
composer update --ignore-platform-reqs