I fought enough to be able to send an email from the API KEY Mandrill with a user it provides me if you have your account. I could find the answer and leave the answer here in case someone else serves.
MandrillTransport
Config Mandrill in email.php
public $mandrill = array(
'transport' => 'Mandrill',
'uri' => 'https://mandrillapp.com/api/1.0/',
'api_key' => 'YR3eo8WM9F-Je2********',
);
My code email :
$email = new CakeEmail();
$email->config('mandrill');
$email->from('example#example.com');
$email->to('example2#example.com');
$email->subject('Subject for Email');
$result = $email->send('Here is some test content for the email.');
print_r($result);
Response :
[Mandrill] => Array
(
[status] => error
[code] => -1
[name] => Invalid_Key
[message] => Invalid API key
)
Under these circumstances you receive this error message (rare for me, since the api key is fine).
EDIT
I realized thanks to the example used instead of api_key key but only rough with change :
'api_key' to 'key' => $apikey,
I realized thanks #César to the example used instead of api_key but key only rough with change in my config :
public $mandrill = array(
'transport' => 'Mandrill',
'uri' => 'https://mandrillapp.com/api/1.0/',
'key' => 'YR3eo8WM9F-Je2********',
);
Related
My aws/aws-sdk-php version is 2.7.27. The emails we sent are marked as spam. I found that my AWS account has got 8 dedicated IPs in Dedicated IPs page. But the sender IP of my email isn't any of the dedicated IPs, it's a shared IP of amazon SES. In developer document of SES, I found that they said I can make a Configuration Set to specify whick IP pool is used for sending. I add a param called 'ConfigurationSetName' as the doc said but it doesn't work, my emails are still sending through shared IPs. My code is like:
$sendingParams = array(
'Source' => $fromEmail,
'Destination' => array(
'ToAddresses' => is_array($email) ? $email : array($email),
//'CcAddresses' => is_array($ccEmail) ? $ccEmail : array($ccEmail),
//'BccAddresses' => is_array($bccEmail) ? $bccEmail : array($bccEmail),
),
'Message' => array(
// Subject is required
'Subject' => array(
// Data is required
'Data' => $subject,
'Charset' => 'utf-8',
),
// Body is required
'Body' => array(
'Html' => array(
// Data is required
'Data' => $content,
'Charset' => 'utf-8',
),
),
),
'ReplyToAddresses' => array($fromEmail),
'ReturnPath' => $returnPath,
'ConfigurationSetName' => 'system',
);
if (!empty($ccEmail)) {
$sendingParams['Destination']['CcAddresses'] = is_array($ccEmail) ? $ccEmail : array($ccEmail);
}
if (!empty($bccEmail)) {
$sendingParams['Destination']['BccAddresses'] = is_array($bccEmail) ? $bccEmail : array($bccEmail);
}
$result = $this->sdkClient->sendEmail($sendingParams);
What's the problem with my code? Should I change the version of the SDK?
I find the problem. My dedicated IPs are warming up, and I can't use them before they were totally warmed up.
I need to send an email for mandrill. This Mandrill API implemented in my project, and send a test mail by apikey provided by the client. I have two options for sending mail, one is by my account of Mandrill and the other is that the user can login by MailChimp. Then insert the API KEY mandrill your account.
I have a default variable in conf file like this:
public $default = array(
'transport' => 'Smtp',
'from' => array('noreply#example.com' => 'Example'),
'host' => 'smtp.mandrillapp.com',
'port' => 587,
'timeout' => 30,
'username' => 'example#example.com',
'password' => '12345678',
'client' => null,
'log' => false
//'charset' => 'utf-8',
//'headerCharset' => 'utf-8',
);
To send mail through my account mandrill I do this:
$email = new FrameworkEmail();
$email->config('default');
$email->emailFormat('html');
And I give my account Mandrill data. But if the user chooses to identify with MailChimp and also add your API KEY Mandrill mails should be sent from your account transactional emails and not mine. Any idea if this is possible?
I do not believe this is possible to authenticate with MailChimp and then send through Mandrill. The Mandrill API uses a different set of keys than the MailChimp API, so you won't have access to a user's Mandrill API keys if they're logged in through MailChimp.
EDIT: If you have a user's Mandrill API key, you should be able to feed it directly into the Mandrill send function from the Mandrill SDK:
<?php
$mandrill = new Mandrill('USER_PROVIDED_API_KEY_GOES_HERE');
$message = array(
'html' => '<p>html content here</p>',
// other details here
)
$async = False;
$ip_pool = null;
$send_at = null;
$result = $mandrill->messages->send($message, $async, $ip_pool, $send_at);
?>
More details on the Message function in the SDK can be found here.
EDIT #2: Same approach can be achieved using CakeEmail - you just need to instantiate the $email class at the time that you receive the user's API key, rather than before.
CakeEmail recommends in a standard setup that you do this in your initial configuration:
class EmailConfig {
public $mandrill = array(
'transport' => 'Mandrill.Mandrill',
'from' => 'from#example.com',
'fromName' => 'FromName',
'timeout' => 30,
'api_key' => 'YOUR_API_KEY',
'emailFormat' => 'both',
);
}
But we can't set this up with default values and then change it per user, using their API key. We need to instantiate this at the time that we receive the user's email, like so:
App::uses('CakeEmail', 'Network/Email');
// PHP code that takes in user email
$user_api_key = // this would come from a form, or from a user's record in the database
$email = new CakeEmail(array(
'transport' => 'Mandrill.Mandrill',
'from' => 'from#example.com',
'fromName' => 'FromName',
'timeout' => 30,
'api_key' => $user_api_key,
'emailFormat' => 'both',
));
// add CakeEmail details like $email->template, $email->subject(), etc.
$email->send();
So the principles are the same regardless of what framework is used. Rather than instantiating Mandrill configuration details in a global setting (like most email frameworks recommend), you will need to instantiate them at the time the user wants to send an email, using user-specific details.
I am attempting to send mail using AWS SES sendEmail method, and I'm having trouble with an error. I have read this question: AWS SDK Guzzle error when trying to send a email with SES
I am dealing with a very similar issue. The original poster indicates that they have a solution, but did not post the solution.
My code:
$response = $this->sesClient->sendEmail('example#example.com',
array('ToAddresses' => array($to)),
array('Subject.Data' => array($subject), 'Body.Text.Data' => array($message)));
Guzzle code producing the error (from aws/Guzzle/Service/Client.php):
return $this->getCommand($method, isset($args[0]) ? $args[0] : array())->getResult();
Error produced:
Catchable fatal error: Argument 2 passed to Guzzle\Service\Client::getCommand() must be of the type array, string given
Looking at the Guzzle code, I can see that the call to getCommand will send a string if args[0] is set and is a string. If args[0] is NOT set then an empty array is sent.
What am I missing here please?
SOLUTION:
It turns out I was trying to use SDK1 data structures on the SDK2 code base. Thanks to Charlie Smith for helping me to understand what I was doing wrong.
For others (using AWS SDK for PHP 2) :
Create the client -
$this->sesClient = \Aws\Ses\SesClient::factory(array(
'key' =>AWS_ACCESS_KEY_ID,
'secret' => AWS_SECRET_KEY,
'region' => Region::US_EAST_1
));
Now, structure the email (don't forget that if you're using the sandbox you will need to verify any addresses you send to. This restriction doesn't apply if you have been granted production status) -
$from = "Example name <example#example.com>";
$to ="example#verified.domain.com";
$subject = "Testing AWS SES SendEmail()";
$response = $this->sesClient->getCommand('SendEmail', array(
'Source' => $from,
'Destination' => array(
'ToAddresses' => array($to)
),
'Message' => array(
'Subject' => array(
'Data' => $subject
),
'Body' => array(
'Text' => array(
'Data' => "Hello World!\n Testing AWS email sending."
),
'Html' => array(
'Data' => "<h1>Hello World!</h1><p>Testing AWS email sending</p>"
)
),
),
))->execute();
That should work now.
Here is the relevant section in the AWS SDK for PHP 2 documentation:
http://docs.aws.amazon.com/aws-sdk-php-2/latest/class-Aws.Ses.SesClient.html#_sendEmail
I am currently building a e-mail client (inbound and outbound sending) using Mandrill as the e-mail sending / inbound service and Laravel 3.x.
In order to send messages, I am using the HTTPful bundle with the Mandrill using the following code in my mail/compose POST method.
$url = 'https://mandrillapp.com/api/1.0/messages/send.json';
$data = array(
'key' => '{removedAPIkey}',
'message' => array (
'to' => array( array( "email" => $_to ) ),
'from_name' => Auth::user()->name,
'from_email' => Auth::user()->email,
'subject' => $_subject,
'html' => $_body
),
'async' => true
);
$request = Httpful::post($url)->sendsJson()->body($data)->send();
Link to better formatted code above: http://paste.laravel.com/m79
Now as far as I can tell from the API log, the request is correctly made (with the expected JSON) and a response of the following format is sent back:
[
{
"email": "test#test.com",
"status": "queued",
"_id": "longmessageID"
}
]
However, what I am trying to do is access the response from the request (specifically the _id attribute), which is in JSON. Now as far as I'm aware, the HTTPful class should do this automatically (using json_decode()). However, accessing:
$request->_id;
is not working and I'm not entirely sure how to get this data out (it is required so I can record this for soft-bounce, hard-bounce and rejection messages for postmaster-like functionality)
Any assistance would be appreciated.
Edit
Using the following code, results in the mail being sent but an error returned:
$url = 'https://mandrillapp.com/api/1.0/messages/send.json';
$data = array(
'key' => '{removedAPIkey}',
'message' => array (
'to' => array( array( "email" => $_to ) ),
'from_name' => Auth::user()->name,
'from_email' => Auth::user()->email,
'subject' => $_subject,
'html' => $_body
),
'async' => true
);
$request = Httpful::post($url)->sendsJson()->body($data)->send();
if ( $request[0]->status == "queued" ) {
$success = true;
}
Results in an exception being thrown: Cannot use object of type Httpful\Response as array
I must say, a huge thanks to Aiias for his assistance. I managed to fix this myself (I must have spent hours looking at this). For anyone who wants to know, the HTTPful bundle has a body array, where the response is kept. Therefore, the code below works:
$url = 'https://mandrillapp.com/api/1.0/messages/send.json';
$data = array(
'key' => '{removedAPIkey}',
'message' => array (
'to' => array( array( "email" => $_to ) ),
'from_name' => Auth::user()->name,
'from_email' => Auth::user()->email,
'subject' => $_subject,
'html' => $_body
),
'async' => true
);
$request = Httpful::post($url)->sendsJson()->body($data)->send();
if ( $request->body[0]->status == "queued" ) {
$success = true;
}
Again, huge thanks to Aiias for clearing some major confusion up for me!
This is my first post in this forum.
I'm trying to develop all the payments to Adyen using the WS, instead of the skin/post method that I was using until now.
So, I downloaded from their example, this code (I'm posting also the class method to connect by WS)
function Adyen($login, $password, $host ="live", $debug=FALSE ) {
$this->DEBUG = $debug;
$this->client = new SoapClient( "https://pal-$host.adyen.com/pal/Payment.wsdl",
array(
"login" => $login,
"password" => $password,
'trace' => 1,
'soap_version' => SOAP_1_1,
'style' => SOAP_DOCUMENT,
'encoding' => SOAP_LITERAL
)
);
}
function authorise( $amount,$currencyCode,$cardHolder,$cardNumber,$expm,$expy,$cvc,$reference) {
global $merchantAccount;
$response = $this->client->authorise( array(
"paymentRequest" => array
(
"amount" => array (
"value" => $amount,
"currency" => $currencyCode),
"card" => array (
"cvc" => $cvc,
"expiryMonth" => $expm,
"expiryYear" => $expy,
"holderName" => $cardHolder,
"number" => $cardNumber,
),
"merchantAccount" => $merchantAccount,
"reference" => $reference,
)
)
);
When I'm executing this code, it returns this error
#!/usr/bin/php SOAP Error on test SoapFault Object ( [message:protected] => security 010 Not allowed [string:Exception:private] =>
Do you have any suggestions to solve it?
Best Regards.
Edit:
It's too strange, cause with the same method, but with different parameters (In case of the recurring payment, I haven't this error. This the case runs
$response = $this->client->authorise(
array(
"paymentRequest" =>
array(
"amount" => array("value" => $amount,
"currency" => $currencyCode),
"merchantAccount" => $merchantAccount,
"reference" => $reference,
"shopperReference" => $reference",
"shopperEmail" => $email,
"recurring" => array("contract" => "RECURRING"),
"selectedRecurringDetailReference" => "LATEST",
"shopperInteraction" => "ContAuth"
)
)
);
Had the same question, here is the support answer:
You are trying to make an API payment. Please be aware that there are a few downsides using the direct integration API.
Most important, due to strict industry regulations, the Merchant is required to be PCI DSS (Payment Card Industry Data Security Standard) compliant at Level 1 or 2. The PCI DSS certification process requires a big contribution from you in both time and money.
http://en.wikipedia.org/wiki/PCI_DSS
The direct integration also offers a limited set of payment methods and might require you to implement features like the 3D secure mechanism.
The normal integration works as follow:
Redirect the shopper from your website to our Hosted Payment Pages.
Shopper can choose several payment methods and makes the payment.
Shopper is redirected back to your website and we pass back a result code of the payment.
We sent also a notification via SOAP or HTTP Post.
From Adyen documentation
010 Not allowed You are not allowed to perform this action
I think you should send email to their support. May be your account not ready for use.
You need to add your ip in the ca admin area for the user 'Edit Allowed User IP Range'.
I think in this code you have mistakenly put extra double quotes( "shopperReference" => $reference",).
$response = $this->client->authorise(
array(
"paymentRequest" =>
array(
"amount" => array("value" => $amount,
"currency" => $currencyCode),
"merchantAccount" => $merchantAccount,
"reference" => $reference,
"shopperReference" => $reference",
"shopperEmail" => $email,
"recurring" => array("contract" => "RECURRING"),
"selectedRecurringDetailReference" => "LATEST",
"shopperInteraction" => "ContAuth"
)
)
);