Related
Problem
I have a form that, when submitted, will run basic code to process the information submitted and insert it into a database for display on a notification website. In addition, I have a list of people who have signed up to receive these notifications via email and SMS message. This list is trivial as the moment (only pushing about 150), however it's enough to cause it takes upwards of a minute to cycle through the entire table of subscribers and send out 150+ emails. (The emails are being sent individually as requested by the system administrators of our email server because of mass email policies.)
During this time, the individual who posted the alert will sit on the last page of the form for almost a minute without any positive reinforcement that their notification is being posted. This leads to other potential problems, all that have possible solutions that I feel are less than ideal.
First, the poster might think the server is lagging and click the 'Submit' button again, causing the script to start over or run twice. I could solve this by using JavaScript to disable the button and replace the text to say something like 'Processing...', however this is less than ideal because the user will still be stuck on the page for the length of the script execution. (Also, if JavaScript is disabled, this problem still exists.)
Second, the poster might close the tab or the browser prematurely after submitting the form. The script will keeping running on the server until it tries to write back to the browser, however if the user then browses to any page within our domain (while the script is still running), the browser hangs loading the page until the script has ended. (This only happens when a tab or window of the browser is closed and not the entire browser application.) Still, this is less than ideal.
(Possible) Solution
I've decided I want to break out the "email" part of the script into a separate file I can call after the notification has been posted. I originally thought of putting this on the confirmation page after the notification has been successfully posted. However, the user will not know this script is running and any anomalies will not be apparent to them; This script cannot fail.
But, what if I can run this script as a background process? So, my question is this: How can I execute a PHP script to trigger as a background service and run completely independent of what the user has done at the form level?
EDIT: This cannot be cron'ed. It must run the instant the form is submitted. These are high-priority notifications. In addition, the system administrators running our servers disallow crons from running any more frequently than 5 minutes.
Doing some experimentation with exec and shell_exec I have uncovered a solution that worked perfectly! I choose to use shell_exec so I can log every notification process that happens (or doesn't). (shell_exec returns as a string and this was easier than using exec, assigning the output to a variable and then opening a file to write to.)
I'm using the following line to invoke the email script:
shell_exec("/path/to/php /path/to/send_notifications.php '".$post_id."' 'alert' >> /path/to/alert_log/paging.log &");
It is important to notice the & at the end of the command (as pointed out by #netcoder). This UNIX command runs a process in the background.
The extra variables surrounded in single quotes after the path to the script are set as $_SERVER['argv'] variables that I can call within my script.
The email script then outputs to my log file using the >> and will output something like this:
[2011-01-07 11:01:26] Alert Notifications Sent for http://alerts.illinoisstate.edu/2049 (SCRIPT: 38.71 seconds)
[2011-01-07 11:01:34] CRITICAL ERROR: Alert Notifications NOT sent for http://alerts.illinoisstate.edu/2049 (SCRIPT: 23.12 seconds)
On Linux/Unix servers, you can execute a job in the background by using proc_open:
$descriptorspec = array(
array('pipe', 'r'), // stdin
array('file', 'myfile.txt', 'a'), // stdout
array('pipe', 'w'), // stderr
);
$proc = proc_open('php email_script.php &', $descriptorspec, $pipes);
The & being the important bit here. The script will continue even if the original script has ended.
Of all the answers, none considered the ridiculously easy fastcgi_finish_request function, that when called, flushes all remaining output to the browser and closes the Fastcgi session and the HTTP connection, while letting the script run in the background.
Example:
<?php
header('Content-Type: application/json');
echo json_encode(['ok' => true]);
fastcgi_finish_request(); // The user is now disconnected from the script
// Do stuff with received data
Note: Due to a wontfix quirk calling flush() after fastcgi_finish_request will cause it to exit without warning/error.
You may wish to call ignore_user_abort(true) beforehand to supress this behavior, or simply avoid calling flush() after you've intentionally closed the connection :)
$connected = true;
// Stuff...
fastcgi_finish_request();
$connected = false;
// ...
if ($connected) {
flush();
}
Or
ignore_user_abort(true);
fastcgi_finish_request();
// Accidental flush()es won't do harm (even if you really shouldn't be calling flush() if you know you've disconnected from the user)
flush();
PHP exec("php script.php") can do it.
From the Manual:
If a program is started with this
function, in order for it to continue
running in the background, the output
of the program must be redirected to a
file or another output stream. Failing
to do so will cause PHP to hang until
the execution of the program ends.
So if you redirect the output to a log file (what is a good idea anyways), your calling script will not hang and your email script will run in bg.
And why not making a HTTP Request on the script and ignoring the response ?
http://php.net/manual/en/function.httprequest-send.php
If you make your request on the script you need to call your webserver will run it in background and you can (in your main script) show a message telling the user that the script is running.
The simpler way to run a PHP script in background is
php script.php >/dev/null &
The script will run in background and the page will also reach the action page faster.
How about this?
Your PHP script that holds the form saves a flag or some value into a database or file.
A second PHP script polls for this value periodically and if it's been set, it triggers the Email script in a synchronous manner.
This second PHP script should be set to run as a cron.
As I know you cannot do this in easy way (see fork exec etc (don't work under windows)), may be you can reverse the approach, use the background of the browser posting the form in ajax, so if the post still work you've no wait time.
This can help even if you have to do some long elaboration.
About sending mail it's always suggest to use a spooler, may be a local & quick smtp server that accept your requests and the spool them to the real MTA or put all in a DB, than use a cron that spool the queue.
The cron may be on another machine calling the spooler as external url:
* * * * * wget -O /dev/null http://www.example.com/spooler.php
Background cron job sounds like a good idea for this.
You'll need ssh access to the machine to run the script as a cron.
$ php scriptname.php to run it.
If you can access the server over ssh and can run your own scripts you can make a simple fifo server using php (although you will have to recompile php with posix support for fork).
The server can be written in anything really, you probably can easily do it in python.
Or the simplest solution would be sending an HttpRequest and not reading the return data but the server might destroy the script before it finish processing.
Example server :
<?php
define('FIFO_PATH', '/home/user/input.queue');
define('FORK_COUNT', 10);
if(file_exists(FIFO_PATH)) {
die(FIFO_PATH . ' exists, please delete it and try again.' . "\n");
}
if(!file_exists(FIFO_PATH) && !posix_mkfifo(FIFO_PATH, 0666)){
die('Couldn\'t create the listening fifo.' . "\n");
}
$pids = array();
$fp = fopen(FIFO_PATH, 'r+');
for($i = 0; $i < FORK_COUNT; ++$i) {
$pids[$i] = pcntl_fork();
if(!$pids[$i]) {
echo "process(" . posix_getpid() . ", id=$i)\n";
while(true) {
$line = chop(fgets($fp));
if($line == 'quit' || $line === false) break;
echo "processing (" . posix_getpid() . ", id=$i) :: $line\n";
// $data = json_decode($line);
// processData($data);
}
exit();
}
}
fclose($fp);
foreach($pids as $pid){
pcntl_waitpid($pid, $status);
}
unlink(FIFO_PATH);
?>
Example client :
<?php
define('FIFO_PATH', '/home/user/input.queue');
if(!file_exists(FIFO_PATH)) {
die(FIFO_PATH . ' doesn\'t exist, please make sure the fifo server is running.' . "\n");
}
function postToQueue($data) {
$fp = fopen(FIFO_PATH, 'w+');
stream_set_blocking($fp, false); //don't block
$data = json_encode($data) . "\n";
if(fwrite($fp, $data) != strlen($data)) {
echo "Couldn't the server might be dead or there's a bug somewhere\n";
}
fclose($fp);
}
$i = 1000;
while(--$i) {
postToQueue(array('xx'=>21, 'yy' => array(1,2,3)));
}
?>
If you're on Windows, research proc_open or popen...
But if we're on the same server "Linux" running cpanel then this is the right approach:
#!/usr/bin/php
<?php
$pid = shell_exec("nohup nice php -f
'path/to/your/script.php' /dev/null 2>&1 & echo $!");
While(exec("ps $pid"))
{ //you can also have a streamer here like fprintf,
// or fgets
}
?>
Don't use fork() or curl if you doubt you can handle them, it's just like abusing your server
Lastly, on the script.php file which is called above, take note of this make sure you wrote:
<?php
ignore_user_abort(TRUE);
set_time_limit(0);
ob_start();
// <-- really optional but this is pure php
//Code to be tested on background
ob_flush(); flush();
//this two do the output process if you need some.
//then to make all the logic possible
str_repeat(" ",1500);
//.for progress bars or loading images
sleep(2); //standard limit
?>
For background worker, I think you should try this technique. It will help to call as many as pages you like all pages will run at once independently without waiting for each page response as asynchronous.
form_action_page.php
<?php
post_async("http://localhost/projectname/testpage.php", "Keywordname=testValue");
// post_async("http://localhost/projectname/testpage.php", "Keywordname=testValue2");
// post_async("http://localhost/projectname/otherpage.php", "Keywordname=anyValue");
// call as many as pages you like all pages will run at once //independently without waiting for each page response as asynchronous.
// Your form db insertion or other code goes here do what ever you want //above code will work as background job this line will direct hit before //above lines response
/*
* Executes a PHP page asynchronously so the current page does not have to wait for it to finish running.
*/
function post_async($url,$params)
{
$post_string = $params;
$parts = parse_url($url);
$fp = fsockopen($parts['host'],
isset($parts['port'])?$parts['port']:80,
$errno, $errstr, 30);
$out = "GET ".$parts['path']."?$post_string"." HTTP/1.1\r\n";//you can use POST instead of GET if you like
$out .= "Host: ".$parts['host']."\r\n";
$out .= "Content-Type: application/x-www-form-urlencoded\r\n";
$out .= "Content-Length: ".strlen($post_string)."\r\n";
$out .= "Connection: Close\r\n\r\n";
fwrite($fp, $out);
fclose($fp);
}
?>
testpage.php
<?php
echo $_REQUEST["Keywordname"];//case1 Output > testValue
// here do your background operations it will not halt main page
?>
P.S: if you want to send url parameters as loop then follow this answer: https://stackoverflow.com/a/41225209/6295712
Assuming you are running on a *nix platform, use cron and the php executable.
EDIT:
There are quite a number of questions asking for "running php without cron" on SO already. Here's one:
Schedule scripts without using CRON
That said, the exec() answer above sounds very promising :)
In my case I have 3 params, one of them is string (mensaje):
exec("C:\wamp\bin\php\php5.5.12\php.exe C:/test/N/trunk/api/v1/Process.php $idTest2 $idTest3 \"$mensaje\" >> c:/log.log &");
In my Process.php I have this code:
if (!isset($argv[1]) || !isset($argv[2]) || !isset($argv[3]))
{
die("Error.");
}
$idCurso = $argv[1];
$idDestino = $argv[2];
$mensaje = $argv[3];
Use Amphp to execute jobs in parallel & asynchronously.
Install the library
composer require amphp/parallel-functions
Code sample
<?php
require "vendor/autoload.php";
use Amp\Promise;
use Amp\ParallelFunctions;
echo 'started</br>';
$promises[1] = ParallelFunctions\parallel(function (){
// Send Email
})();
$promises[2] = ParallelFunctions\parallel(function (){
// Send SMS
})();
Promise\wait(Promise\all($promises));
echo 'finished';
Fo your use case, You can do something like below
<?php
use function Amp\ParallelFunctions\parallelMap;
use function Amp\Promise\wait;
$responses = wait(parallelMap([
'a#example.com',
'b#example.com',
'c#example.com',
], function ($to) {
return send_mail($to);
}));
This works for me. try this:
exec("php asyn.php > /dev/null 2>/dev/null &);
What I've to do it's a bit complicated.
I've a python script and I want to run it from PHP, but in background. I had seen somewhere that for run a python script in background I have to use the PHP command exec(script.py) to run without wait for a return: and thus far no problem.
First question:
I have to stop this loop script with another PHP command, how to do this?
Second question:
I have to implement a server-side timer, who stops the script at the end of the time.
I found this code:
<?php
$timer = 60*5; // seconds
$timestamp_file = 'end_timestamp.txt';
if(!file_exists($timestamp_file))
{
file_put_contents($timestamp_file, time()+$timer);
}
$end_timestamp = file_get_contents($timestamp_file);
$current_timestamp = time();
$difference = $end_timestamp - $current_timestamp;
if($difference <= 0)
{
echo 'time is up, BOOOOOOM';
// execute your function here
// reset timer by writing new timestamp into file
file_put_contents($timestamp_file, time()+$timer);
}
else
{
echo $difference.'s left...';
}
?>
From this answer.
Then, there is a way to implement it in a MySQL database? (The integration with the script stop is not a problem)
That's actually pretty simple. You can use a memory object caching system. I would recommend memcached. Memory objects from memcached can be accessed literally from anywhere in your system. The only requirement is that a connection to the memcached backend server is supported. (PHP does, Python does, etc.)
Answer to your first question:
Create a variable called stopme with the value 0 in the memcached database.
Connect from your python script to the memcached database and read the variable stopme permanently. Let's say the python script is running when the variable stopme has the value 0.
In order to stop your script from PHP, make a connection from your PHP script to the memcached server and set stopme to 1.
The python script receives the updated value instantly and exits.
Answer to your second question:
It could be done like explained in my answer before through reading shared variables, but additionally I would like to mention that you also could use a cronjob to kill a running script.
Problem
I have a form that, when submitted, will run basic code to process the information submitted and insert it into a database for display on a notification website. In addition, I have a list of people who have signed up to receive these notifications via email and SMS message. This list is trivial as the moment (only pushing about 150), however it's enough to cause it takes upwards of a minute to cycle through the entire table of subscribers and send out 150+ emails. (The emails are being sent individually as requested by the system administrators of our email server because of mass email policies.)
During this time, the individual who posted the alert will sit on the last page of the form for almost a minute without any positive reinforcement that their notification is being posted. This leads to other potential problems, all that have possible solutions that I feel are less than ideal.
First, the poster might think the server is lagging and click the 'Submit' button again, causing the script to start over or run twice. I could solve this by using JavaScript to disable the button and replace the text to say something like 'Processing...', however this is less than ideal because the user will still be stuck on the page for the length of the script execution. (Also, if JavaScript is disabled, this problem still exists.)
Second, the poster might close the tab or the browser prematurely after submitting the form. The script will keeping running on the server until it tries to write back to the browser, however if the user then browses to any page within our domain (while the script is still running), the browser hangs loading the page until the script has ended. (This only happens when a tab or window of the browser is closed and not the entire browser application.) Still, this is less than ideal.
(Possible) Solution
I've decided I want to break out the "email" part of the script into a separate file I can call after the notification has been posted. I originally thought of putting this on the confirmation page after the notification has been successfully posted. However, the user will not know this script is running and any anomalies will not be apparent to them; This script cannot fail.
But, what if I can run this script as a background process? So, my question is this: How can I execute a PHP script to trigger as a background service and run completely independent of what the user has done at the form level?
EDIT: This cannot be cron'ed. It must run the instant the form is submitted. These are high-priority notifications. In addition, the system administrators running our servers disallow crons from running any more frequently than 5 minutes.
Doing some experimentation with exec and shell_exec I have uncovered a solution that worked perfectly! I choose to use shell_exec so I can log every notification process that happens (or doesn't). (shell_exec returns as a string and this was easier than using exec, assigning the output to a variable and then opening a file to write to.)
I'm using the following line to invoke the email script:
shell_exec("/path/to/php /path/to/send_notifications.php '".$post_id."' 'alert' >> /path/to/alert_log/paging.log &");
It is important to notice the & at the end of the command (as pointed out by #netcoder). This UNIX command runs a process in the background.
The extra variables surrounded in single quotes after the path to the script are set as $_SERVER['argv'] variables that I can call within my script.
The email script then outputs to my log file using the >> and will output something like this:
[2011-01-07 11:01:26] Alert Notifications Sent for http://alerts.illinoisstate.edu/2049 (SCRIPT: 38.71 seconds)
[2011-01-07 11:01:34] CRITICAL ERROR: Alert Notifications NOT sent for http://alerts.illinoisstate.edu/2049 (SCRIPT: 23.12 seconds)
On Linux/Unix servers, you can execute a job in the background by using proc_open:
$descriptorspec = array(
array('pipe', 'r'), // stdin
array('file', 'myfile.txt', 'a'), // stdout
array('pipe', 'w'), // stderr
);
$proc = proc_open('php email_script.php &', $descriptorspec, $pipes);
The & being the important bit here. The script will continue even if the original script has ended.
Of all the answers, none considered the ridiculously easy fastcgi_finish_request function, that when called, flushes all remaining output to the browser and closes the Fastcgi session and the HTTP connection, while letting the script run in the background.
Example:
<?php
header('Content-Type: application/json');
echo json_encode(['ok' => true]);
fastcgi_finish_request(); // The user is now disconnected from the script
// Do stuff with received data
Note: Due to a wontfix quirk calling flush() after fastcgi_finish_request will cause it to exit without warning/error.
You may wish to call ignore_user_abort(true) beforehand to supress this behavior, or simply avoid calling flush() after you've intentionally closed the connection :)
$connected = true;
// Stuff...
fastcgi_finish_request();
$connected = false;
// ...
if ($connected) {
flush();
}
Or
ignore_user_abort(true);
fastcgi_finish_request();
// Accidental flush()es won't do harm (even if you really shouldn't be calling flush() if you know you've disconnected from the user)
flush();
PHP exec("php script.php") can do it.
From the Manual:
If a program is started with this
function, in order for it to continue
running in the background, the output
of the program must be redirected to a
file or another output stream. Failing
to do so will cause PHP to hang until
the execution of the program ends.
So if you redirect the output to a log file (what is a good idea anyways), your calling script will not hang and your email script will run in bg.
And why not making a HTTP Request on the script and ignoring the response ?
http://php.net/manual/en/function.httprequest-send.php
If you make your request on the script you need to call your webserver will run it in background and you can (in your main script) show a message telling the user that the script is running.
The simpler way to run a PHP script in background is
php script.php >/dev/null &
The script will run in background and the page will also reach the action page faster.
How about this?
Your PHP script that holds the form saves a flag or some value into a database or file.
A second PHP script polls for this value periodically and if it's been set, it triggers the Email script in a synchronous manner.
This second PHP script should be set to run as a cron.
As I know you cannot do this in easy way (see fork exec etc (don't work under windows)), may be you can reverse the approach, use the background of the browser posting the form in ajax, so if the post still work you've no wait time.
This can help even if you have to do some long elaboration.
About sending mail it's always suggest to use a spooler, may be a local & quick smtp server that accept your requests and the spool them to the real MTA or put all in a DB, than use a cron that spool the queue.
The cron may be on another machine calling the spooler as external url:
* * * * * wget -O /dev/null http://www.example.com/spooler.php
Background cron job sounds like a good idea for this.
You'll need ssh access to the machine to run the script as a cron.
$ php scriptname.php to run it.
Assuming you are running on a *nix platform, use cron and the php executable.
EDIT:
There are quite a number of questions asking for "running php without cron" on SO already. Here's one:
Schedule scripts without using CRON
That said, the exec() answer above sounds very promising :)
If you can access the server over ssh and can run your own scripts you can make a simple fifo server using php (although you will have to recompile php with posix support for fork).
The server can be written in anything really, you probably can easily do it in python.
Or the simplest solution would be sending an HttpRequest and not reading the return data but the server might destroy the script before it finish processing.
Example server :
<?php
define('FIFO_PATH', '/home/user/input.queue');
define('FORK_COUNT', 10);
if(file_exists(FIFO_PATH)) {
die(FIFO_PATH . ' exists, please delete it and try again.' . "\n");
}
if(!file_exists(FIFO_PATH) && !posix_mkfifo(FIFO_PATH, 0666)){
die('Couldn\'t create the listening fifo.' . "\n");
}
$pids = array();
$fp = fopen(FIFO_PATH, 'r+');
for($i = 0; $i < FORK_COUNT; ++$i) {
$pids[$i] = pcntl_fork();
if(!$pids[$i]) {
echo "process(" . posix_getpid() . ", id=$i)\n";
while(true) {
$line = chop(fgets($fp));
if($line == 'quit' || $line === false) break;
echo "processing (" . posix_getpid() . ", id=$i) :: $line\n";
// $data = json_decode($line);
// processData($data);
}
exit();
}
}
fclose($fp);
foreach($pids as $pid){
pcntl_waitpid($pid, $status);
}
unlink(FIFO_PATH);
?>
Example client :
<?php
define('FIFO_PATH', '/home/user/input.queue');
if(!file_exists(FIFO_PATH)) {
die(FIFO_PATH . ' doesn\'t exist, please make sure the fifo server is running.' . "\n");
}
function postToQueue($data) {
$fp = fopen(FIFO_PATH, 'w+');
stream_set_blocking($fp, false); //don't block
$data = json_encode($data) . "\n";
if(fwrite($fp, $data) != strlen($data)) {
echo "Couldn't the server might be dead or there's a bug somewhere\n";
}
fclose($fp);
}
$i = 1000;
while(--$i) {
postToQueue(array('xx'=>21, 'yy' => array(1,2,3)));
}
?>
If you're on Windows, research proc_open or popen...
But if we're on the same server "Linux" running cpanel then this is the right approach:
#!/usr/bin/php
<?php
$pid = shell_exec("nohup nice php -f
'path/to/your/script.php' /dev/null 2>&1 & echo $!");
While(exec("ps $pid"))
{ //you can also have a streamer here like fprintf,
// or fgets
}
?>
Don't use fork() or curl if you doubt you can handle them, it's just like abusing your server
Lastly, on the script.php file which is called above, take note of this make sure you wrote:
<?php
ignore_user_abort(TRUE);
set_time_limit(0);
ob_start();
// <-- really optional but this is pure php
//Code to be tested on background
ob_flush(); flush();
//this two do the output process if you need some.
//then to make all the logic possible
str_repeat(" ",1500);
//.for progress bars or loading images
sleep(2); //standard limit
?>
For background worker, I think you should try this technique. It will help to call as many as pages you like all pages will run at once independently without waiting for each page response as asynchronous.
form_action_page.php
<?php
post_async("http://localhost/projectname/testpage.php", "Keywordname=testValue");
// post_async("http://localhost/projectname/testpage.php", "Keywordname=testValue2");
// post_async("http://localhost/projectname/otherpage.php", "Keywordname=anyValue");
// call as many as pages you like all pages will run at once //independently without waiting for each page response as asynchronous.
// Your form db insertion or other code goes here do what ever you want //above code will work as background job this line will direct hit before //above lines response
/*
* Executes a PHP page asynchronously so the current page does not have to wait for it to finish running.
*/
function post_async($url,$params)
{
$post_string = $params;
$parts = parse_url($url);
$fp = fsockopen($parts['host'],
isset($parts['port'])?$parts['port']:80,
$errno, $errstr, 30);
$out = "GET ".$parts['path']."?$post_string"." HTTP/1.1\r\n";//you can use POST instead of GET if you like
$out .= "Host: ".$parts['host']."\r\n";
$out .= "Content-Type: application/x-www-form-urlencoded\r\n";
$out .= "Content-Length: ".strlen($post_string)."\r\n";
$out .= "Connection: Close\r\n\r\n";
fwrite($fp, $out);
fclose($fp);
}
?>
testpage.php
<?php
echo $_REQUEST["Keywordname"];//case1 Output > testValue
// here do your background operations it will not halt main page
?>
P.S: if you want to send url parameters as loop then follow this answer: https://stackoverflow.com/a/41225209/6295712
In my case I have 3 params, one of them is string (mensaje):
exec("C:\wamp\bin\php\php5.5.12\php.exe C:/test/N/trunk/api/v1/Process.php $idTest2 $idTest3 \"$mensaje\" >> c:/log.log &");
In my Process.php I have this code:
if (!isset($argv[1]) || !isset($argv[2]) || !isset($argv[3]))
{
die("Error.");
}
$idCurso = $argv[1];
$idDestino = $argv[2];
$mensaje = $argv[3];
Use Amphp to execute jobs in parallel & asynchronously.
Install the library
composer require amphp/parallel-functions
Code sample
<?php
require "vendor/autoload.php";
use Amp\Promise;
use Amp\ParallelFunctions;
echo 'started</br>';
$promises[1] = ParallelFunctions\parallel(function (){
// Send Email
})();
$promises[2] = ParallelFunctions\parallel(function (){
// Send SMS
})();
Promise\wait(Promise\all($promises));
echo 'finished';
Fo your use case, You can do something like below
<?php
use function Amp\ParallelFunctions\parallelMap;
use function Amp\Promise\wait;
$responses = wait(parallelMap([
'a#example.com',
'b#example.com',
'c#example.com',
], function ($to) {
return send_mail($to);
}));
This works for me. try this:
exec("php asyn.php > /dev/null 2>/dev/null &);
I need to build a system that a user will send file to the server
then php will run a command-line tool using system() ( example tool.exe userfile )
i need a way to see the pid of the process to know the user that have start the tool
and a way to know when the tool have stop .
Is this possible on a Windows vista Machine , I can't move to a Linux Server .
besides that the code must continue run when the user close the browser windows
Rather than trying to obtain the ID of a process and monitor how long it runs, I think that what you want to do is have a "wrapper" process that handles pre/post-processing, such as logging or database manipulation.
The first step to the is to create an asynchronous process, that will run independently of the parent and allow it to be started by a call to a web page.
To do this on Windows, we use WshShell:
$cmdToExecute = "tool.exe \"$userfile\"";
$WshShell = new COM("WScript.Shell");
$result = $WshShell->Run($cmdToExecute, 0, FALSE);
...and (for completeness) if we want to do it on *nix, we append > /dev/null 2>&1 & to the command:
$cmdToExecute = "/usr/bin/tool \"$userfile\"";
exec("$cmdToExecute > /dev/null 2>&1 &");
So, now you know how to start an external process that will not block your script, and will continue execution after your script has finished. But this doesn't complete the picture - because you want to track the start and end times of the external process. This is quite simple - we just wrap it in a little PHP script, which we shall call...
wrapper.php
<?php
// Fetch the arguments we need to pass on to the external tool
$userfile = $argv[1];
// Do any necessary pre-processing of the file here
$startTime = microtime(TRUE);
// Execute the external program
exec("C:/path/to/tool.exe \"$userfile\"");
// By the time we get here, the external tool has finished - because
// we know that a standard call to exec() will block until the called
// process finishes
$endTime = microtime(TRUE);
// Log the times etc and do any post processing here
So instead of executing the tool directly, we make our command in the main script:
$cmdToExecute = "php wrapper.php \"$userfile\"";
...and we should have a finely controllable solution for what you want to do.
N.B. Don't forget to escapeshellarg() where necessary!
I'll show some code, first:
echo exec("compile\\save.exe Untitled.c tmpUntitled.c");
I have a program, named save.exe and i want to know if it already stopped?
If stopped, ok... Do something...
If not, may be an error, or a loop...
Now: I want to build same way to control the time that program use, and put a limit (time limit exceed, something like this...)
Any one has a sugestion ?
Edit[1]:save.exe is a program wrote on C language, and use two parameters: source and destiny.
popen just don't execute save.exe, i say this because it don't gerenate anymore the destiny (with execit happens);
exec() will suspend your script while the exec'd program is running. Control will be returned only when the external program terminates. If you want to see if the program's hung up or waiting for input or somesuch, you use popen(), which returns a filehandle from which you can read the program's output. At that point you can do a polling loop to see if there's been any output:
$app = popen("your shell command here");
while($output = fgets($app)) {
// handle output
sleep(5); // sleep 5 seconds
}
If you want to send something to the app as input, then you have to use proc_open(), which allows bi-directional communication between your script and the external program.