First, I wanted to say, that I do aware of that thread: PHP - kill exec on client disconnect, but the solution marked there as answer doesn't work!
Problem:
I got a script, that executes other script that does numeric operations... but would like to force it to stop on disconnect, as those operations may take even few minutes, and are using alot of server resources. Hitting F5 few times only makes those times longer and longer...
What I tried... I tried every solution I found. Especially the one given above, but none of them seems to work. Scripts are still running in background till finish.
Any ideas?
PHP5 + Apache on Debian.
Have you tried to produce some output inside your numerical operations logic using flush()? for example assume you've a recursive algorithm that does some calculations, do the output writing every 100 recursive calls as follows and see if it aborts:
recursive(input) {
if(input % 100 == 0) // check every 100 recursive call
{
echo " ";
flush(); // attempt to write to output stream
if (connection_aborted()) // will be true if output writing fails.
exit;
}
// do something
// your code logic...
input = input + 1;
// and call recursive
recursive(input);
}
Related
I am unable to understand and run a simple PHP script in FCGI mode. I am learning both Perl and PHP and I got the Perl version of FastCGI example below to work as expected.
Perl FastCGI counter:
#!/usr/bin/perl
use FCGI;
$count = 0;
while (FCGI::accept() >= 0) {
print("Content-type: text/html\r\n\r\n",
"<title>FastCGI Hello! (Perl)</title>\n",
"<h1>FastCGI Hello! (Perl)</h1>\n",
"Request number ", $++count,
" running on host <i>$ENV('SERVER_NAME')</i>");
}
Searching for similar in PHP found talk about "fastcgi_finish_request" but have no clue how
to accomplish the counter example in PHP, here is what I tried:
<?php
header("content-type: text/html");
$counter++;
echo "Counter: $counter ";
//http://www.php.net/manual/en/intro.fpm.php
fastcgi_finish_request(); //If you remove this line, then you will see that the browser has to wait 5 seconds
sleep(5);
?>
Perl is not PHP. This must not mean that you can not most often interchange things and port code between the two, however when it comes to runtime environments there are bigger differences you can not just interchange.
FCGI is on the request / protocol level already which is fully abstracted in the PHP runtime and you therefore have not as much control in PHP as you would have with Perl and use FCGI;
Therefore you can not just port that code.
Next to that fastcgi_finish_request is totally unrelated to the Perl code. You must have confused it or thrown it in by sheer luck to give it a try. However it's not really useful in this counter example context.
PHP and HTTP are stateless.
All data is only relevant for the current, ongoing request.
If you need to save state, you might consider storing the data into cookie, session, cache or db.
So the implementation of this "counter" example will be different for PERL and PHP.
Your usage of fastcgi_finish_request won't bring the functionality you expect from PERL.
Think about a long running calculation, where you output data in the middle.
You can do that with fastcgi_finish_request, the data is then pushed to the browsers, while the long running tasks keeps running.
Opening happens together FASTCGI+PHP.
Normally the connection would be open till PHP finishes, then FASTCGI would be closed.
Except you reach the exec timeout of PHP (exec timeout) or fastcgi timeout (connection timeout). fastcgi_finish_request handles the case, where the fascgi connection to the browser is closed BEFORE PHP finishes execution.
Simple Hit Counter Example for PHP
<?php
$hit_count = #file_get_contents('count.txt'); // read count from file
$hit_count++; // increment hit count by 1
echo $hit_count; // display
#file_put_contents('count.txt', $hit_count); // store the new hit count
?>
Honestly, that's not even how you should do it using Perl either.
Instead, I'd recommend using CGI::Session to track session information:
#!/usr/bin/perl
use strict;
use warnings;
use CGI;
use CGI::Carp qw(fatalsToBrowser);
use CGI::Session;
my $q = CGI->new;
my $session = CGI::Session->new($q) or die CGI->Session->errstr;
print $session->header();
# Page View Count
my $count = 1 + ($session->param('count') // 0);
$session->param('count' => $count);
# HTML
print qq{<html>
<head><title>Hello! (Perl)</title></head>
<body>
<h1>Hello! (Perl)</h1>
<p>Request number $count running on host <i>$ENV{SERVER_NAME}</i></p>
</body>
</html>};
Alternatively, if you really want to go barebones, you could keep a local file as demonstrated in: I still don't get locking. I just want to increment the number in the file. How can I do this?
I'm trying to find a way in which I can echo out the output of an exec call, and then flush that to the screen while the process is running. I have written a simple PHP script which accepts a file upload and then converts the file if it is not the appropriate file type using FFMPEG. I am doing this on a windows machine. Currently my command looks like so:
$cmd = "ffmpeg.exe -i ..\..\uploads\\".$filename." ..\..\uploads\\".$filename.".m4v 2>&1";
exec( $cmd, $output);
I need something like this:
while( $output ) {
print_r( $output);
ob_flush(); flush();
}
I've read about using ob_flush() and flush() to clear the output buffer, but I only get output once the process has completed. The command works perfectly, It just doesn't update the Page while converting. I'd like to have some output so the person knows what's going on.
I've set the time out
set_time_limit( 10 * 60 ); //5 minute time out
and would be very greatful if someone could put me in the right direction. I've looked at a number of solutions which come close one Stackoverflow, but none seem to have worked.
Since the exec call is a blocking call you have no way of using buffers to get status.
Instead you could redirect the output in the system call to a log file. Let the client query the server for progress update in which case the server could parse the last lines of the log file to get information about current progress and send it back to the client.
exec() is blocking call, and will NOT return control to PHP until the external program has terminated. That means you cannot do anything to dump the output on a line-by-line basis because PHP is suspended while the external app is running.
For what you want, you need to use proc_open, which returns a filehandle you can read from in a loop. e.g.
$fh = proc_open('.....');
while($line = fgets($fh)) {
print($line);
flush();
}
There are two problems with this approach:
The first is that, as #Marc B notes, the fact that exec will block until it's finished. You'll have to devise some way of measuring progress.
The second is that using ob_flush() in this way amounts to holding the connection between server & client open and dribbling the data out a little at a time. This is not something that the HTTP protocol was designed for and while it might work sometimes, it's not going to work consistently - different browsers and different servers will time out differently. The better way to do it is via AJAX calls: using Javascript's setTimeout() function (or setInterval()), make a call to the server periodically and have the server send back a progress report.
I've been completely unsuccessful finding an answer to this question. Hopefully someone here can help.
I have a PHP script (a WordPress template, to be specific) that automatically imports and processes images when a user hits it. The problem is that the image processing takes up a lot of memory, particularly if multiple users are accessing the template at the same time and initiating the image processing. My server crashed multiple times because of this.
My solution to this was to not execute the image-processing function if it was already running. Before the function started running, I would check a database entry named image_import_running to see if it was set to false. If it was, the function then ran. The very first thing the function did was set image_import_running to true. Then, after it was all finished, I set it back to false.
It worked great -- in theory. The site hasn't crashed since, I can tell you that. But there are two major problems with it:
If the user closes the page while it's loading, the script never finishes processing the images and therefore never sets image_import_running back to false. The template will never process images again until it's manually set to false.
If the script times out while it's processing images -- and that's a strong possibility if there are many images in the queue -- you have essentially the same problem as No. 1: the script never gets to the point where it sets image_import_running back to false.
To handle No. 1 (the first one of the two problems I realized), I added ignore_user_abort(true) to the script. Did it work? I don't know, because No. 2 is still an issue. That's where I'm stumped.
If I could ask the server whether the script was running or not, I could do something like this:
if($import_running && $script_not_running) {
$import_running = false;
}
But how do I set that $script_not_running variable? Beats me.
I've shared this entire story with you just in case you have some other brilliant solution.
Try using
ignore_user_abort(true); it will continue to run even if the person leaves and closes the browser.
you might also want to put a number instead of true false in the db record and set a maximum number of processes that can run together
As others have suggested, it would be best to move the image processing out of the request itself.
As an interim "fix", store a timestamp alongside image_import_running when a processing job begins (e.g., image_import_commenced). This is a very crude mechanism, but if you know the maximum time that a job can run before timing out, the script can check whether that period of time has elapsed.
e.g., if image_import_running is still true but the current time is more than 10 minutes since image_import_commenced, run the processing anyway.
What about setting a transient with an expiry time that would throttle the operation?
if(!get_transient( 'import_running' )) {
set_transient( 'import_running', true, 30 ); // set a 30 second transient on the import.
run_the_import_function();
}
I would rather store the job into database flagging it pending and set a cron job to execute the processing one job at a time.
For Me i use just this simple idea with a text document. for example run.txt file
in the top script use :
if((file_get_contents('run.txt') != 'run'){ // here the script will work
$file = fopen('run.txt', 'w+');
fwrite($file, 'run');
fclose('run.txt');
}else{
exit(); // if it find 'run' in run.txt the script will stop
}
And add this in the end of your script file
$file = fopen('run.txt', 'w+');
fwrite($file, ''); //will delete run word for the next try ;)
fclose('run.txt');
That will check if script already work by checking runt.txt contents
if run word exist in run.txt it will not run
Running a cron would definitively be a better solution. Idea to store url in a table is a good one.
To answer to the original question, you may run a ps auxwww command with exec (Check this page: How to get list of running php scripts using PHP exec()? ) and move your function in a separated php file.
exec("ps auxwww|grep myfunction.php|grep -v grep", $output);
Just add following on the top of your script.
<?php
// Ensures single instance of script run at a time.
$fileName = basename(__FILE__);
$output = shell_exec("ps -ef | grep -v grep | grep $fileName | wc -l");
//echo $output;
if ($output > 2)
{
echo "Already running - $fileName\n";
exit;
}
// Your php script code.
?>
I wanted to execute a bunch of code for 5 seconds and if it has not finished executing within the specificed time frame I need to execute another piece of code..
Whether it's possible?
Ex..
There are two functions A and B
If A takes more than 30 seconds to execute the control should pass on to B
During function A you could periodically check how long the script has been executing, and if it goes over x seconds, run B:
function checkTime($start) {
$current = time();
$secondsToExecute = 5;
if (($start+$secondsToExecute) <= $current) {
func_b();
}
}
function func_a($start) {
// do some code
checkTime($start);
// do some code
checkTime($start);
// do some code
}
function func_b() {
// do something else
exit();
}
func_a(time());
http://php.net/manual/en/features.connection-handling.php
Set a time limit and a shutdown function, which checks if the status is 2 (timeout) and does your stuff if so.
One thing to note is that the time limit set this way only counts actual php processing time. Time spent with php waiting for another process or a database or http connection, etc, will not count and your time limit will not be considered reached.
If you need to count actual time that passed, even if it was not php processing time, you're going to have to go with the above suggested answer. Manually inserting that time check in places where it makes sense is the best, i.e. inside loops that you know may run too long, maybe even not on every iteration but on every N iterations, etc. Alternatively a more general approach is to use register_tick_function(), but that might lead to a noticeable performance hit with a low tick count, and you must take care to unregister it or use appropriate flags so you don't end up infinitely starting more and more calls to your timeout handling code once the timeout has happened.
Other approaches are also possible, you can register a handler for some signal using pcntl_signal() and have it sent to your process when the time limit is reached by an outside program ('man timeout' if you are on a linux box) or by a fork()-ed instance of your own php script, etc.
The question sort of says it all - is there a function which does the same as the JavaScript function setTimeout() for PHP? I've searched php.net, and I can't seem to find any...
There is no way to delay execution of part of the code of in the current script. It wouldn't make much sense, either, as the processing of a PHP script takes place entirely on server side and you would just delay the overall execution of the script. There is sleep() but that will simply halt the process for a certain time.
You can, of course, schedule a PHP script to run at a specific time using cron jobs and the like.
There's the sleep function, which pauses the script for a determined amount of time.
See also usleep, time_nanosleep and time_sleep_until.
PHP isn't event driven, so a setTimeout doesn't make much sense. You can certainly mimic it and in fact, someone has written a Timer class you could use. But I would be careful before you start programming in this way on the server side in PHP.
A few things I'd like to note about timers in PHP:
1) Timers in PHP make sense when used in long-running scripts (daemons and, maybe, in CLI scripts). So if you're not developing that kind of application, then you don't need timers.
2) Timers can be blocking and non-blocking. If you're using sleep(), then it's a blocking timer, because your script just freezes for a specified amount of time.
For many tasks blocking timers are fine. For example, sending statistics every 10 seconds. It's ok to block the script:
while (true) {
sendStat();
sleep(10);
}
3) Non-blocking timers make sense only in event driven apps, like websocket-server. In such applications an event can occur at any time (e.g incoming connection), so you must not block your app with sleep() (obviously).
For this purposes there are event-loop libraries, like reactphp/event-loop, which allows you to handle multiple streams in a non-blocking fashion and also has timer/ interval feature.
4) Non-blocking timeouts in PHP are possible.
It can be implemented by means of stream_select() function with timeout parameter (see how it's implemented in reactphp/event-loop StreamSelectLoop::run()).
5) There are PHP extensions like libevent, libev, event which allow timers implementation (if you want to go hardcore)
Not really, but you could try the tick count function.
http://php.net/manual/en/class.evtimer.php is probably what you are looking for, you can have a function called during set intervals, similar to setInterval in javascript. it is a pecl extension, if you have whm/cpanel you can easily install it through the pecl software/extension installer page.
i hadn't noticed this question is from 2010 and the evtimer class started to be coded in 2012-2013. so as an update to an old question, there is now a class that can do this similar to javascripts settimeout/setinterval.
Warning: You should note that while the sleep command can make a PHP process hang, or "sleep" for a given amount of time, you'd generally implement visual delays within the user interface.
Since PHP is a server side language, merely writing its execution output (generally in the form of HTML) to a web server response: using sleep in this fashion will generally just stall or delay the response.
With that being said, sleep does have practical purposes. Delaying execution can be used to implement back off schemes, such as when retrying a request after a failed connection. Generally speaking, if you need to use a setTimeout in PHP, you're probably doing something wrong.
Solution: If you still want to implement setTimeout in PHP, to answer your question explicitly: Consider that setTimeout possesses two parameters, one which represents the function to run, and the other which represents the amount of time (in milliseconds). The following code would actually meet the requirements in your question:
<?php
// Build the setTimeout function.
// This is the important part.
function setTimeout($fn, $timeout){
// sleep for $timeout milliseconds.
sleep(($timeout/1000));
$fn();
}
// Some example function we want to run.
$someFunctionToExecute = function() {
echo 'The function executed!';
}
// This will run the function after a 3 second sleep.
// We're using the functional property of first-class functions
// to pass the function that we wish to execute.
setTimeout($someFunctionToExecute, 3000);
?>
The output of the above code will be three seconds of delay, followed by the following output:
The function executed!
if you need to make an action after you execute some php code you can do it with an echo
echo "Success.... <script>setTimeout(function(){alert('Hello')}, 3000);</script>";
so after a time in the client(browser) you can do something else, like a redirect to another php script for example or echo an alert
There is a Generator class available in PHP version > 5.5 which provides a function called yield that helps you pause and continue to next function.
generator-example.php
<?php
function myGeneratorFunction()
{
echo "One","\n";
yield;
echo "Two","\n";
yield;
echo "Three","\n";
yield;
}
// get our Generator object (remember, all generator function return
// a generator object, and a generator function is any function that
// uses the yield keyword)
$iterator = myGeneratorFunction();
OUTPUT
One
If you want to execute the code after the first yield you add these line
// get the current value of the iterator
$value = $iterator->current();
// get the next value of the iterator
$value = $iterator->next();
// and the value after that the next value of the iterator
// $value = $iterator->next();
Now you will get output
One
Two
If you minutely see the setTimeout() creates an event loop.
In PHP there are many libraries out there E.g amphp is a popular one that provides event loop to execute code asynchronously.
Javascript snippet
setTimeout(function () {
console.log('After timeout');
}, 1000);
console.log('Before timeout');
Converting above Javascript snippet to PHP using Amphp
Loop::run(function () {
Loop::delay(1000, function () {
echo date('H:i:s') . ' After timeout' . PHP_EOL;
});
echo date('H:i:s') . ' Before timeout' . PHP_EOL;
});
Check this Out!
<?php
set_time_limit(20);
while ($i<=10)
{
echo "i=$i ";
sleep(100);
$i++;
}
?>
Output:
i=0 i=1 i=2 i=3 i=4 i=5 i=6 i=7 i=8 i=9 i=10