I have a array that looks like this:
$array = [
["444", "0081"],
["449", "0081"],
["451", "0081"],
["455", "2100"],
["469", "2100"]
];
I need to group as a new array that looks like:
array (
0 =>
array (
0 => '444,449,451',
1 => '0081',
),
1 =>
array (
0 => '455,469',
1 => '2100',
),
)
I'd tried many scripts, but with no success.
function _group_by($array, $key) {
$return = array();
foreach($array as $val) {
$return[$val[$key]][] = $val;
}
return $return;
}
$newArray = _group_by($array, 1); // (NO SUCCESS)
There should be more elegant solutions, but simplest one I can think of would be this.
// The data you have pasted in the question
$data = [];
$groups = [];
// Go through the entire array $data
foreach($data as $item){
// If the key doesn't exist in the new array yet, add it
if(!array_key_exists($item[1], $groups)){
$groups[$item[1]] = [];
}
// Add the value to the array
$groups[$item[1]][] = $item[0];
}
// Create an array for the data with the structure you requested
$structured = [];
foreach($groups as $group => $values){
// With the array built in the last loop, implode it with a comma
// Also add the 'key' from the last array to it ($group)
$structured[] = [implode(',', $values), $group];
}
I haven't tested this but something similar should do the trick. This simply goes through the given array and collects all entries in a structurized manner (so $groups variable will contain an array entry for each group sharing a key, and the key will correspond to the 2nd item in each item within the given array). From there it's just about restructuring it to get the format you have requested.
http://php.net/manual/en/control-structures.foreach.php
Writing two loops is too much effort for this task. Use isset() with temporary keys applied to your output array as you iterate. When finished grouping the data, reindex the output with array_values().
Code (Demo)
$array = [
["444", "0081"],
["449", "0081"],
["451", "0081"],
["455", "2100"],
["469", "2100"]
];
foreach ($array as $row) {
if (!isset($result[$row[1]])) {
$result[$row[1]] = $row; // first occurrence of group, save whole row
} else {
$result[$row[1]][0] .= ',' . $row[0]; // not first occurrence, concat first element in group
}
}
var_export(array_values($result));
Or avoid the temporary associative arrays in the result array by using an array of references. (Demo)
$result = [];
foreach ($array as $row) {
if (!isset($ref[$row[1]])) {
$ref[$row[1]] = $row;
$result[] = &$ref[$row[1]];
} else {
$ref[$row[1]][0] .= ',' . $row[0];
}
}
var_export($result);
Or use array_reduce() to enjoy a functional-style technique. (Demo)
var_export(
array_values(
array_reduce(
$array,
function($result, $row) {
if (!isset($result[$row[1]])) {
$result[$row[1]] = $row;
} else {
$result[$row[1]][0] .= ',' . $row[0];
}
return $result;
}
)
)
);
All will output:
array (
0 =>
array (
0 => '444,449,451',
1 => '0081',
),
1 =>
array (
0 => '455,469',
1 => '2100',
),
)
I have two arrays that I would like to join into one. Both arrays have a common key=>value and I would like to insert the values of one array to the other so that I to create one array.
$array1 = [
['ID' => 123456, 'Key' => 1000, 'value' => 123.45],
['ID' => 789012, 'Key' => 1001, 'value' => 56748.17],
];
$array2 = [
['Key' => 1000, 'description' => 'desc1'],
['Key' => 1001, 'description' => 'desc2'],
];
I would like to join Array2 with Array1 so that the resulting Array is as follows:
array (
0 =>
array (
'ID' => 123456,
'Key' => 1000,
'value' => 123.45,
'description' => 'desc1',
),
1 =>
array (
'ID' => 789012,
'Key' => 1001,
'value' => 56748.17,
'description' => 'desc2',
),
)
So the arrays have been joined using the [Key] value as the, well, key. I've looked at array_merge and other function but I can't seem to get these two arrays to "merge" properly.
try this, its linear
$keyval = array();
foreach($array1 as $item)$keyval[$item['Key']] = $item['value'];
foreach($array2 as $key=>$item)$array2[$key]['description'] = isset($keyval[$item['Key']]) ? $keyval[$item['Key']] : '';
You would have to do something like
$result = array();
foreach ($a1 as $v1)
{
foreach ($a2 as $k2 => $v2)
{
if ($v1['Key'] === $v2['Key'])
{
$result[] = array_merge($v1, $v2);
unset($a2[$k2]);
break;
}
}
}
Version with for loops
$result = array();
$c_a1 = count($a1);
$c_a2 = count($a2);
for ($i = 0; $i < $c_a1; $i++)
{
for ($j = 0; $j < $c_a2; $j++)
{
if ($a1[$i]['Key'] === $a2[$j]['Key'])
{
$result[] = array_merge($a1[$i], $a2[$j]);
unset($a2[$j]);
$c_a2--;
break;
}
}
}
This is my approach:
$temp_ array = array_fill_keys (array_map(create_function('$a', 'return $a["Key"];'), $array_1) , $array_1);
$result = array();
foreach ($array_2 as $item) {
if (isset($temp_array[$item['Key']])) {
$result[] = array_merge($item, $temp_array[$item['Key']]);
}
}
I have elaborated more in the code above, and reached this improved version:
function array_merge_items_by_common_key_value($key, $array_1, $array_2)
{
$result = array();
$temp_ array = array_fill_keys(array_map(create_function('$a', 'return $a["' . $key . '"];'), $array_1) , $array_1);
foreach ($array_2 as $item)
{
$result[$item[$key]] = isset($temp_array[$item[$key]]) ? array_merge($item, $temp_array[$item[$key]]) : $item;
}
return array_values(array_merge($result, array_diff_key($array_1, $result)));
}
$merged_arrays = array_merge_items_by_common_key_value('Key', $temp_array, $array_2);
First, a temporary array is created: it is equal to $array_1, but its keys are the values to be matched.
Then, $array_2 is looped. When a match is found, the merge is done. If there is no match, then the $array_2 value is maintained, untouched.
Finally, those values in the $array_1 which were not matched, are also appended to the resulting array.
So, no item of both $array_1 or $array_2 is lost, while the matched items are merged.
#radashk's solution will work if you can always guarantee that $array1[$i] corresponds to $array2[$i]. From my reading of the question, that's not guaranteed, but instead you want to make sure that $array1[$i]['Key'] == $array2[$j]['Key'], and combine elements where those Keys match.
There may be a more elegant solution, but I would do it like this:
// builds up new $tmpArray, using the Key as the index
$tmpArray = array();
foreach($array1 as $innerArray1){
$tmpArray[$innerArray1['Key']] = $innerArray1;
}
//Merges the values from $array2 into $tmpArray
foreach($array2 as $innerArray2) {
if (isset($tmpArray[$innerArray2['Key']])) {
$tmpArray[$innerArray2['Key']] = array_merge($tmpArray[$innerArray2['Key']], $innerArray2);
}else{
$tmpArray[$innerArray2['Key']] = $innerArray2;
}
}
Use temporary first level keys to swiftly identify matching Key values between the two arrays. When an array2 row qualifies for merger with the first, use the union-assignment operator (+=). Call array_value() after looping if you don't want to preserve the temporary keys.
Code: (Demo)
$result = array_column($array1, null, 'Key');
foreach ($array2 as $row) {
if (isset($result[$row['Key']])) {
$result[$row['Key']] += $row;
}
}
var_export(array_values($result));
I have an associative array in the form key => value where key is a numerical value, however it is not a sequential numerical value. The key is actually an ID number and the value is a count. This is fine for most instances, however I want a function that gets the human-readable name of the array and uses that for the key, without changing the value.
I didn't see a function that does this, but I'm assuming I need to provide the old key and new key (both of which I have) and transform the array. Is there an efficient way of doing this?
$arr[$newkey] = $arr[$oldkey];
unset($arr[$oldkey]);
The way you would do this and preserve the ordering of the array is by putting the array keys into a separate array, find and replace the key in that array and then combine it back with the values.
Here is a function that does just that:
function change_key( $array, $old_key, $new_key ) {
if( ! array_key_exists( $old_key, $array ) )
return $array;
$keys = array_keys( $array );
$keys[ array_search( $old_key, $keys ) ] = $new_key;
return array_combine( $keys, $array );
}
if your array is built from a database query, you can change the key directly from the mysql statement:
instead of
"select ´id´ from ´tablename´..."
use something like:
"select ´id´ **as NEWNAME** from ´tablename´..."
The answer from KernelM is nice, but in order to avoid the issue raised by Greg in the comment (conflicting keys), using a new array would be safer
$newarr[$newkey] = $oldarr[$oldkey];
$oldarr=$newarr;
unset($newarr);
$array = [
'old1' => 1
'old2' => 2
];
$renameMap = [
'old1' => 'new1',
'old2' => 'new2'
];
$array = array_combine(array_map(function($el) use ($renameMap) {
return $renameMap[$el];
}, array_keys($array)), array_values($array));
/*
$array = [
'new1' => 1
'new2' => 2
];
*/
You could use a second associative array that maps human readable names to the id's. That would also provide a Many to 1 relationship. Then do something like this:
echo 'Widgets: ' . $data[$humanreadbleMapping['Widgets']];
If you want also the position of the new array key to be the same as the old one you can do this:
function change_array_key( $array, $old_key, $new_key) {
if(!is_array($array)){ print 'You must enter a array as a haystack!'; exit; }
if(!array_key_exists($old_key, $array)){
return $array;
}
$key_pos = array_search($old_key, array_keys($array));
$arr_before = array_slice($array, 0, $key_pos);
$arr_after = array_slice($array, $key_pos + 1);
$arr_renamed = array($new_key => $array[$old_key]);
return $arr_before + $arr_renamed + $arr_after;
}
Simple benchmark comparison of both solution.
Solution 1 Copy and remove (order lost, but way faster) https://stackoverflow.com/a/240676/1617857
<?php
$array = ['test' => 'value', ['etc...']];
$array['test2'] = $array['test'];
unset($array['test']);
Solution 2 Rename the key https://stackoverflow.com/a/21299719/1617857
<?php
$array = ['test' => 'value', ['etc...']];
$keys = array_keys( $array );
$keys[array_search('test', $keys, true)] = 'test2';
array_combine( $keys, $array );
Benchmark:
<?php
$array = ['test' => 'value', ['etc...']];
for ($i =0; $i < 100000000; $i++){
// Solution 1
}
for ($i =0; $i < 100000000; $i++){
// Solution 2
}
Results:
php solution1.php 6.33s user 0.02s system 99% cpu 6.356 total
php solution1.php 6.37s user 0.01s system 99% cpu 6.390 total
php solution2.php 12.14s user 0.01s system 99% cpu 12.164 total
php solution2.php 12.57s user 0.03s system 99% cpu 12.612 total
If your array is recursive you can use this function:
test this data:
$datos = array
(
'0' => array
(
'no' => 1,
'id_maquina' => 1,
'id_transaccion' => 1276316093,
'ultimo_cambio' => 'asdfsaf',
'fecha_ultimo_mantenimiento' => 1275804000,
'mecanico_ultimo_mantenimiento' =>'asdfas',
'fecha_ultima_reparacion' => 1275804000,
'mecanico_ultima_reparacion' => 'sadfasf',
'fecha_siguiente_mantenimiento' => 1275804000,
'fecha_ultima_falla' => 0,
'total_fallas' => 0,
),
'1' => array
(
'no' => 2,
'id_maquina' => 2,
'id_transaccion' => 1276494575,
'ultimo_cambio' => 'xx',
'fecha_ultimo_mantenimiento' => 1275372000,
'mecanico_ultimo_mantenimiento' => 'xx',
'fecha_ultima_reparacion' => 1275458400,
'mecanico_ultima_reparacion' => 'xx',
'fecha_siguiente_mantenimiento' => 1275372000,
'fecha_ultima_falla' => 0,
'total_fallas' => 0,
)
);
here is the function:
function changekeyname($array, $newkey, $oldkey)
{
foreach ($array as $key => $value)
{
if (is_array($value))
$array[$key] = changekeyname($value,$newkey,$oldkey);
else
{
$array[$newkey] = $array[$oldkey];
}
}
unset($array[$oldkey]);
return $array;
}
I like KernelM's solution, but I needed something that would handle potential key conflicts (where a new key may match an existing key). Here is what I came up with:
function swapKeys( &$arr, $origKey, $newKey, &$pendingKeys ) {
if( !isset( $arr[$newKey] ) ) {
$arr[$newKey] = $arr[$origKey];
unset( $arr[$origKey] );
if( isset( $pendingKeys[$origKey] ) ) {
// recursion to handle conflicting keys with conflicting keys
swapKeys( $arr, $pendingKeys[$origKey], $origKey, $pendingKeys );
unset( $pendingKeys[$origKey] );
}
} elseif( $newKey != $origKey ) {
$pendingKeys[$newKey] = $origKey;
}
}
You can then cycle through an array like this:
$myArray = array( '1970-01-01 00:00:01', '1970-01-01 00:01:00' );
$pendingKeys = array();
foreach( $myArray as $key => $myArrayValue ) {
// NOTE: strtotime( '1970-01-01 00:00:01' ) = 1 (a conflicting key)
$timestamp = strtotime( $myArrayValue );
swapKeys( $myArray, $key, $timestamp, $pendingKeys );
}
// RESULT: $myArray == array( 1=>'1970-01-01 00:00:01', 60=>'1970-01-01 00:01:00' )
Here is a helper function to achieve that:
/**
* Helper function to rename array keys.
*/
function _rename_arr_key($oldkey, $newkey, array &$arr) {
if (array_key_exists($oldkey, $arr)) {
$arr[$newkey] = $arr[$oldkey];
unset($arr[$oldkey]);
return TRUE;
} else {
return FALSE;
}
}
pretty based on #KernelM answer.
Usage:
_rename_arr_key('oldkey', 'newkey', $my_array);
It will return true on successful rename, otherwise false.
this code will help to change the oldkey to new one
$i = 0;
$keys_array=array("0"=>"one","1"=>"two");
$keys = array_keys($keys_array);
for($i=0;$i<count($keys);$i++) {
$keys_array[$keys_array[$i]]=$keys_array[$i];
unset($keys_array[$i]);
}
print_r($keys_array);
display like
$keys_array=array("one"=>"one","two"=>"two");
Easy stuff:
this function will accept the target $hash and $replacements is also a hash containing newkey=>oldkey associations.
This function will preserve original order, but could be problematic for very large (like above 10k records) arrays regarding performance & memory.
function keyRename(array $hash, array $replacements) {
$new=array();
foreach($hash as $k=>$v)
{
if($ok=array_search($k,$replacements))
$k=$ok;
$new[$k]=$v;
}
return $new;
}
this alternative function would do the same, with far better performance & memory usage, at the cost of losing original order (which should not be a problem since it is hashtable!)
function keyRename(array $hash, array $replacements) {
foreach($hash as $k=>$v)
if($ok=array_search($k,$replacements))
{
$hash[$ok]=$v;
unset($hash[$k]);
}
return $hash;
}
This page has been peppered with a wide interpretation of what is required because there is no minimal, verifiable example in the question body. Some answers are merely trying to solve the "title" without bothering to understand the question requirements.
The key is actually an ID number and the value is a count. This is
fine for most instances, however I want a function that gets the
human-readable name of the array and uses that for the key, without
changing the value.
PHP keys cannot be changed but they can be replaced -- this is why so many answers are advising the use of array_search() (a relatively poor performer) and unset().
Ultimately, you want to create a new array with names as keys relating to the original count. This is most efficiently done via a lookup array because searching for keys will always outperform searching for values.
Code: (Demo)
$idCounts = [
3 => 15,
7 => 12,
8 => 10,
9 => 4
];
$idNames = [
1 => 'Steve',
2 => 'Georgia',
3 => 'Elon',
4 => 'Fiona',
5 => 'Tim',
6 => 'Petra',
7 => 'Quentin',
8 => 'Raymond',
9 => 'Barb'
];
$result = [];
foreach ($idCounts as $id => $count) {
if (isset($idNames[$id])) {
$result[$idNames[$id]] = $count;
}
}
var_export($result);
Output:
array (
'Elon' => 15,
'Quentin' => 12,
'Raymond' => 10,
'Barb' => 4,
)
This technique maintains the original array order (in case the sorting matters), doesn't do any unnecessary iterating, and will be very swift because of isset().
If you want to replace several keys at once (preserving order):
/**
* Rename keys of an array
* #param array $array (asoc)
* #param array $replacement_keys (indexed)
* #return array
*/
function rename_keys($array, $replacement_keys) {
return array_combine($replacement_keys, array_values($array));
}
Usage:
$myarr = array("a" => 22, "b" => 144, "c" => 43);
$newkeys = array("x","y","z");
print_r(rename_keys($myarr, $newkeys));
//must return: array("x" => 22, "y" => 144, "z" => 43);
You can use this function based on array_walk:
function mapToIDs($array, $id_field_name = 'id')
{
$result = [];
array_walk($array,
function(&$value, $key) use (&$result, $id_field_name)
{
$result[$value[$id_field_name]] = $value;
}
);
return $result;
}
$arr = [0 => ['id' => 'one', 'fruit' => 'apple'], 1 => ['id' => 'two', 'fruit' => 'banana']];
print_r($arr);
print_r(mapToIDs($arr));
It gives:
Array(
[0] => Array(
[id] => one
[fruit] => apple
)
[1] => Array(
[id] => two
[fruit] => banana
)
)
Array(
[one] => Array(
[id] => one
[fruit] => apple
)
[two] => Array(
[id] => two
[fruit] => banana
)
)
This basic function handles swapping array keys and keeping the array in the original order...
public function keySwap(array $resource, array $keys)
{
$newResource = [];
foreach($resource as $k => $r){
if(array_key_exists($k,$keys)){
$newResource[$keys[$k]] = $r;
}else{
$newResource[$k] = $r;
}
}
return $newResource;
}
You could then loop through and swap all 'a' keys with 'z' for example...
$inputs = [
0 => ['a'=>'1','b'=>'2'],
1 => ['a'=>'3','b'=>'4']
]
$keySwap = ['a'=>'z'];
foreach($inputs as $k=>$i){
$inputs[$k] = $this->keySwap($i,$keySwap);
}
This function will rename an array key, keeping its position, by combining with index searching.
function renameArrKey($arr, $oldKey, $newKey){
if(!isset($arr[$oldKey])) return $arr; // Failsafe
$keys = array_keys($arr);
$keys[array_search($oldKey, $keys)] = $newKey;
$newArr = array_combine($keys, $arr);
return $newArr;
}
Usage:
$arr = renameArrKey($arr, 'old_key', 'new_key');
this works for renaming the first key:
$a = ['catine' => 'cat', 'canine' => 'dog'];
$tmpa['feline'] = $a['catine'];
unset($a['catine']);
$a = $tmpa + $a;
then, print_r($a) renders a repaired in-order array:
Array
(
[feline] => cat
[canine] => dog
)
this works for renaming an arbitrary key:
$a = ['canine' => 'dog', 'catine' => 'cat', 'porcine' => 'pig']
$af = array_flip($a)
$af['cat'] = 'feline';
$a = array_flip($af)
print_r($a)
Array
(
[canine] => dog
[feline] => cat
[porcine] => pig
)
a generalized function:
function renameKey($oldkey, $newkey, $array) {
$val = $array[$oldkey];
$tmp_A = array_flip($array);
$tmp_A[$val] = $newkey;
return array_flip($tmp_A);
}
There is an alternative way to change the key of an array element when working with a full array - without changing the order of the array.
It's simply to copy the array into a new array.
For instance, I was working with a mixed, multi-dimensional array that contained indexed and associative keys - and I wanted to replace the integer keys with their values, without breaking the order.
I did so by switching key/value for all numeric array entries - here: ['0'=>'foo']. Note that the order is intact.
<?php
$arr = [
'foo',
'bar'=>'alfa',
'baz'=>['a'=>'hello', 'b'=>'world'],
];
foreach($arr as $k=>$v) {
$kk = is_numeric($k) ? $v : $k;
$vv = is_numeric($k) ? null : $v;
$arr2[$kk] = $vv;
}
print_r($arr2);
Output:
Array (
[foo] =>
[bar] => alfa
[baz] => Array (
[a] => hello
[b] => world
)
)
best way is using reference, and not using unset (which make another step to clean memory)
$tab = ['two' => [] ];
solution:
$tab['newname'] = & $tab['two'];
you have one original and one reference with new name.
or if you don't want have two names in one value is good make another tab and foreach on reference
foreach($tab as $key=> & $value) {
if($key=='two') {
$newtab["newname"] = & $tab[$key];
} else {
$newtab[$key] = & $tab[$key];
}
}
Iterration is better on keys than clone all array, and cleaning old array if you have long data like 100 rows +++ etc..
One which preservers ordering that's simple to understand:
function rename_array_key(array $array, $old_key, $new_key) {
if (!array_key_exists($old_key, $array)) {
return $array;
}
$new_array = [];
foreach ($array as $key => $value) {
$new_key = $old_key === $key
? $new_key
: $key;
$new_array[$new_key] = $value;
}
return $new_array;
}
Here is an experiment (test)
Initial array (keys like 0,1,2)
$some_array[] = '6110';//
$some_array[] = '6111';//
$some_array[] = '6210';//
I must change key names to for example human_readable15, human_readable16, human_readable17
Something similar as already posted. During each loop i set necessary key name and remove corresponding key from the initial array.
For example, i inserted into mysql $some_array got lastInsertId and i need to send key-value pair back to jquery.
$first_id_of_inserted = 7;//lastInsertId
$last_loop_for_some_array = count($some_array);
for ($current_loop = 0; $current_loop < $last_loop_for_some_array ; $current_loop++) {
$some_array['human_readable'.($first_id_of_inserted + $current_loop)] = $some_array[$current_loop];//add new key for intial array
unset( $some_array[$current_loop] );//remove already renamed key from array
}
And here is the new array with renamed keys
echo '<pre>', print_r($some_array, true), '</pre>$some_array in '. basename(__FILE__, '.php'). '.php <br/>';
If instead of human_readable15, human_readable16, human_readable17 need something other. Then could create something like this
$arr_with_key_names[] = 'human_readable';
$arr_with_key_names[] = 'something_another';
$arr_with_key_names[] = 'and_something_else';
for ($current_loop = 0; $current_loop < $last_loop_for_some_array ; $current_loop++) {
$some_array[$arr_with_key_names[$current_loop]] = $some_array[$current_loop];//add new key for intial array
unset( $some_array[$current_loop] );//remove already renamed key from array
}
Hmm, I'm not test before, but I think this code working
function replace_array_key($data) {
$mapping = [
'old_key_1' => 'new_key_1',
'old_key_2' => 'new_key_2',
];
$data = json_encode($data);
foreach ($mapping as $needed => $replace) {
$data = str_replace('"'.$needed.'":', '"'.$replace.'":', $data);
}
return json_decode($data, true);
}
You can write simple function that applies the callback to the keys of the given array. Similar to array_map
<?php
function array_map_keys(callable $callback, array $array) {
return array_merge([], ...array_map(
function ($key, $value) use ($callback) { return [$callback($key) => $value]; },
array_keys($array),
$array
));
}
$array = ['a' => 1, 'b' => 'test', 'c' => ['x' => 1, 'y' => 2]];
$newArray = array_map_keys(function($key) { return 'new' . ucfirst($key); }, $array);
echo json_encode($array); // {"a":1,"b":"test","c":{"x":1,"y":2}}
echo json_encode($newArray); // {"newA":1,"newB":"test","newC":{"x":1,"y":2}}
Here is a gist https://gist.github.com/vardius/650367e15abfb58bcd72ca47eff096ca#file-array_map_keys-php.