Related
I tried to use UTF-8 and ran into trouble.
I have tried so many things; here are the results I have gotten:
???? instead of Asian characters. Even for European text, I got Se?or for Señor.
Strange gibberish (Mojibake?) such as Señor or 新浪新闻 for 新浪新闻.
Black diamonds, such as Se�or.
Finally, I got into a situation where the data was lost, or at least truncated: Se for Señor.
Even when I got text to look right, it did not sort correctly.
What am I doing wrong? How can I fix the code? Can I recover the data, if so, how?
This problem plagues the participants of this site, and many others.
You have listed the five main cases of CHARACTER SET troubles.
Best Practice
Going forward, it is best to use CHARACTER SET utf8mb4 and COLLATION utf8mb4_unicode_520_ci. (There is a newer version of the Unicode collation in the pipeline.)
utf8mb4 is a superset of utf8 in that it handles 4-byte utf8 codes, which are needed by Emoji and some of Chinese.
Outside of MySQL, "UTF-8" refers to all size encodings, hence effectively the same as MySQL's utf8mb4, not utf8.
I will try to use those spellings and capitalizations to distinguish inside versus outside MySQL in the following.
Overview of what you should do
Have your editor, etc. set to UTF-8.
HTML forms should start like <form accept-charset="UTF-8">.
Have your bytes encoded as UTF-8.
Establish UTF-8 as the encoding being used in the client.
Have the column/table declared CHARACTER SET utf8mb4 (Check with SHOW CREATE TABLE.)
<meta charset=UTF-8> at the beginning of HTML
Stored Routines acquire the current charset/collation. They may need rebuilding.
UTF-8 all the way through
More details for computer languages (and its following sections)
Test the data
Viewing the data with a tool or with SELECT cannot be trusted.
Too many such clients, especially browsers, try to compensate for incorrect encodings, and show you correct text even if the database is mangled.
So, pick a table and column that has some non-English text and do
SELECT col, HEX(col) FROM tbl WHERE ...
The HEX for correctly stored UTF-8 will be
For a blank space (in any language): 20
For English: 4x, 5x, 6x, or 7x
For most of Western Europe, accented letters should be Cxyy
Cyrillic, Hebrew, and Farsi/Arabic: Dxyy
Most of Asia: Exyyzz
Emoji and some of Chinese: F0yyzzww
More details
Specific causes and fixes of the problems seen
Truncated text (Se for Señor):
The bytes to be stored are not encoded as utf8mb4. Fix this.
Also, check that the connection during reading is UTF-8.
Black Diamonds with question marks (Se�or for Señor);
one of these cases exists:
Case 1 (original bytes were not UTF-8):
The bytes to be stored are not encoded as utf8. Fix this.
The connection (or SET NAMES) for the INSERT and the SELECT was not utf8/utf8mb4. Fix this.
Also, check that the column in the database is CHARACTER SET utf8 (or utf8mb4).
Case 2 (original bytes were UTF-8):
The connection (or SET NAMES) for the SELECT was not utf8/utf8mb4. Fix this.
Also, check that the column in the database is CHARACTER SET utf8 (or utf8mb4).
Black diamonds occur only when the browser is set to <meta charset=UTF-8>.
Question Marks (regular ones, not black diamonds) (Se?or for Señor):
The bytes to be stored are not encoded as utf8/utf8mb4. Fix this.
The column in the database is not CHARACTER SET utf8 (or utf8mb4). Fix this. (Use SHOW CREATE TABLE.)
Also, check that the connection during reading is UTF-8.
Mojibake (Señor for Señor):
(This discussion also applies to Double Encoding, which is not necessarily visible.)
The bytes to be stored need to be UTF-8-encoded. Fix this.
The connection when INSERTing and SELECTing text needs to specify utf8 or utf8mb4. Fix this.
The column needs to be declared CHARACTER SET utf8 (or utf8mb4). Fix this.
HTML should start with <meta charset=UTF-8>.
If the data looks correct, but won't sort correctly, then
either you have picked the wrong collation,
or there is no collation that suits your need,
or you have Double Encoding.
Double Encoding can be confirmed by doing the SELECT .. HEX .. described above.
é should come back C3A9, but instead shows C383C2A9
The Emoji 👽 should come back F09F91BD, but comes back C3B0C5B8E28098C2BD
That is, the hex is about twice as long as it should be.
This is caused by converting from latin1 (or whatever) to utf8, then treating those
bytes as if they were latin1 and repeating the conversion.
The sorting (and comparing) does not work correctly because it is, for example,
sorting as if the string were Señor.
Fixing the Data, where possible
For Truncation and Question Marks, the data is lost.
For Mojibake / Double Encoding, ...
For Black Diamonds, ...
The Fixes are listed here. (5 different fixes for 5 different situations; pick carefully): http://mysql.rjweb.org/doc.php/charcoll#fixes_for_various_cases
I had similar issues with two of my projects, after a server migration. After searching and trying a lot of solutions, I came across with this one:
mysqli_set_charset($con,"utf8mb4");
After adding this line to my configuration file, everything works fine!
I found this solution for MySQLi—PHP mysqli set_charset() Function—when I was looking to solve an insert from an HTML query.
I was also searching for the same issue. It took me nearly one month to find the appropriate solution.
First of all, you will have to update you database will all the recent CHARACTER and COLLATION to utf8mb4 or at least which support UTF-8 data.
For Java:
while making a JDBC connection, add this to the connection URL useUnicode=yes&characterEncoding=UTF-8 as parameters and it will work.
For Python:
Before querying into the database, try enforcing this over the cursor
cursor.execute('SET NAMES utf8mb4')
cursor.execute("SET CHARACTER SET utf8mb4")
cursor.execute("SET character_set_connection=utf8mb4")
If it does not work, happy hunting for the right solution.
Set your code IDE language to UTF-8
Add <meta charset="utf-8"> to your webpage header where you collect data form.
Check your MySQL table definition looks like this:
CREATE TABLE your_table (
...
) ENGINE=InnoDB DEFAULT CHARSET=utf8
If you are using PDO, make sure
$options = array(PDO::MYSQL_ATTR_INIT_COMMAND=>'SET NAMES utf8');
$dbL = new PDO($pdo, $user, $pass, $options);
If you already got a large database with above problem, you can try SIDU to export with correct charset, and import back with UTF-8.
Depending on how the server is setup, you have to change the encode accordingly. utf8 from what you said should work the best. However, if you're getting weird characters, it might help if you change the webpage encoding to ANSI.
This helped me when I was setting up a PHP MySQLi. This might help you understand more: ANSI to UTF-8 in Notepad++
I tried to use UTF-8 and ran into trouble.
I have tried so many things; here are the results I have gotten:
???? instead of Asian characters. Even for European text, I got Se?or for Señor.
Strange gibberish (Mojibake?) such as Señor or 新浪新闻 for 新浪新闻.
Black diamonds, such as Se�or.
Finally, I got into a situation where the data was lost, or at least truncated: Se for Señor.
Even when I got text to look right, it did not sort correctly.
What am I doing wrong? How can I fix the code? Can I recover the data, if so, how?
This problem plagues the participants of this site, and many others.
You have listed the five main cases of CHARACTER SET troubles.
Best Practice
Going forward, it is best to use CHARACTER SET utf8mb4 and COLLATION utf8mb4_unicode_520_ci. (There is a newer version of the Unicode collation in the pipeline.)
utf8mb4 is a superset of utf8 in that it handles 4-byte utf8 codes, which are needed by Emoji and some of Chinese.
Outside of MySQL, "UTF-8" refers to all size encodings, hence effectively the same as MySQL's utf8mb4, not utf8.
I will try to use those spellings and capitalizations to distinguish inside versus outside MySQL in the following.
Overview of what you should do
Have your editor, etc. set to UTF-8.
HTML forms should start like <form accept-charset="UTF-8">.
Have your bytes encoded as UTF-8.
Establish UTF-8 as the encoding being used in the client.
Have the column/table declared CHARACTER SET utf8mb4 (Check with SHOW CREATE TABLE.)
<meta charset=UTF-8> at the beginning of HTML
Stored Routines acquire the current charset/collation. They may need rebuilding.
UTF-8 all the way through
More details for computer languages (and its following sections)
Test the data
Viewing the data with a tool or with SELECT cannot be trusted.
Too many such clients, especially browsers, try to compensate for incorrect encodings, and show you correct text even if the database is mangled.
So, pick a table and column that has some non-English text and do
SELECT col, HEX(col) FROM tbl WHERE ...
The HEX for correctly stored UTF-8 will be
For a blank space (in any language): 20
For English: 4x, 5x, 6x, or 7x
For most of Western Europe, accented letters should be Cxyy
Cyrillic, Hebrew, and Farsi/Arabic: Dxyy
Most of Asia: Exyyzz
Emoji and some of Chinese: F0yyzzww
More details
Specific causes and fixes of the problems seen
Truncated text (Se for Señor):
The bytes to be stored are not encoded as utf8mb4. Fix this.
Also, check that the connection during reading is UTF-8.
Black Diamonds with question marks (Se�or for Señor);
one of these cases exists:
Case 1 (original bytes were not UTF-8):
The bytes to be stored are not encoded as utf8. Fix this.
The connection (or SET NAMES) for the INSERT and the SELECT was not utf8/utf8mb4. Fix this.
Also, check that the column in the database is CHARACTER SET utf8 (or utf8mb4).
Case 2 (original bytes were UTF-8):
The connection (or SET NAMES) for the SELECT was not utf8/utf8mb4. Fix this.
Also, check that the column in the database is CHARACTER SET utf8 (or utf8mb4).
Black diamonds occur only when the browser is set to <meta charset=UTF-8>.
Question Marks (regular ones, not black diamonds) (Se?or for Señor):
The bytes to be stored are not encoded as utf8/utf8mb4. Fix this.
The column in the database is not CHARACTER SET utf8 (or utf8mb4). Fix this. (Use SHOW CREATE TABLE.)
Also, check that the connection during reading is UTF-8.
Mojibake (Señor for Señor):
(This discussion also applies to Double Encoding, which is not necessarily visible.)
The bytes to be stored need to be UTF-8-encoded. Fix this.
The connection when INSERTing and SELECTing text needs to specify utf8 or utf8mb4. Fix this.
The column needs to be declared CHARACTER SET utf8 (or utf8mb4). Fix this.
HTML should start with <meta charset=UTF-8>.
If the data looks correct, but won't sort correctly, then
either you have picked the wrong collation,
or there is no collation that suits your need,
or you have Double Encoding.
Double Encoding can be confirmed by doing the SELECT .. HEX .. described above.
é should come back C3A9, but instead shows C383C2A9
The Emoji 👽 should come back F09F91BD, but comes back C3B0C5B8E28098C2BD
That is, the hex is about twice as long as it should be.
This is caused by converting from latin1 (or whatever) to utf8, then treating those
bytes as if they were latin1 and repeating the conversion.
The sorting (and comparing) does not work correctly because it is, for example,
sorting as if the string were Señor.
Fixing the Data, where possible
For Truncation and Question Marks, the data is lost.
For Mojibake / Double Encoding, ...
For Black Diamonds, ...
The Fixes are listed here. (5 different fixes for 5 different situations; pick carefully): http://mysql.rjweb.org/doc.php/charcoll#fixes_for_various_cases
I had similar issues with two of my projects, after a server migration. After searching and trying a lot of solutions, I came across with this one:
mysqli_set_charset($con,"utf8mb4");
After adding this line to my configuration file, everything works fine!
I found this solution for MySQLi—PHP mysqli set_charset() Function—when I was looking to solve an insert from an HTML query.
I was also searching for the same issue. It took me nearly one month to find the appropriate solution.
First of all, you will have to update you database will all the recent CHARACTER and COLLATION to utf8mb4 or at least which support UTF-8 data.
For Java:
while making a JDBC connection, add this to the connection URL useUnicode=yes&characterEncoding=UTF-8 as parameters and it will work.
For Python:
Before querying into the database, try enforcing this over the cursor
cursor.execute('SET NAMES utf8mb4')
cursor.execute("SET CHARACTER SET utf8mb4")
cursor.execute("SET character_set_connection=utf8mb4")
If it does not work, happy hunting for the right solution.
Set your code IDE language to UTF-8
Add <meta charset="utf-8"> to your webpage header where you collect data form.
Check your MySQL table definition looks like this:
CREATE TABLE your_table (
...
) ENGINE=InnoDB DEFAULT CHARSET=utf8
If you are using PDO, make sure
$options = array(PDO::MYSQL_ATTR_INIT_COMMAND=>'SET NAMES utf8');
$dbL = new PDO($pdo, $user, $pass, $options);
If you already got a large database with above problem, you can try SIDU to export with correct charset, and import back with UTF-8.
Depending on how the server is setup, you have to change the encode accordingly. utf8 from what you said should work the best. However, if you're getting weird characters, it might help if you change the webpage encoding to ANSI.
This helped me when I was setting up a PHP MySQLi. This might help you understand more: ANSI to UTF-8 in Notepad++
I tried to use UTF-8 and ran into trouble.
I have tried so many things; here are the results I have gotten:
???? instead of Asian characters. Even for European text, I got Se?or for Señor.
Strange gibberish (Mojibake?) such as Señor or 新浪新闻 for 新浪新闻.
Black diamonds, such as Se�or.
Finally, I got into a situation where the data was lost, or at least truncated: Se for Señor.
Even when I got text to look right, it did not sort correctly.
What am I doing wrong? How can I fix the code? Can I recover the data, if so, how?
This problem plagues the participants of this site, and many others.
You have listed the five main cases of CHARACTER SET troubles.
Best Practice
Going forward, it is best to use CHARACTER SET utf8mb4 and COLLATION utf8mb4_unicode_520_ci. (There is a newer version of the Unicode collation in the pipeline.)
utf8mb4 is a superset of utf8 in that it handles 4-byte utf8 codes, which are needed by Emoji and some of Chinese.
Outside of MySQL, "UTF-8" refers to all size encodings, hence effectively the same as MySQL's utf8mb4, not utf8.
I will try to use those spellings and capitalizations to distinguish inside versus outside MySQL in the following.
Overview of what you should do
Have your editor, etc. set to UTF-8.
HTML forms should start like <form accept-charset="UTF-8">.
Have your bytes encoded as UTF-8.
Establish UTF-8 as the encoding being used in the client.
Have the column/table declared CHARACTER SET utf8mb4 (Check with SHOW CREATE TABLE.)
<meta charset=UTF-8> at the beginning of HTML
Stored Routines acquire the current charset/collation. They may need rebuilding.
UTF-8 all the way through
More details for computer languages (and its following sections)
Test the data
Viewing the data with a tool or with SELECT cannot be trusted.
Too many such clients, especially browsers, try to compensate for incorrect encodings, and show you correct text even if the database is mangled.
So, pick a table and column that has some non-English text and do
SELECT col, HEX(col) FROM tbl WHERE ...
The HEX for correctly stored UTF-8 will be
For a blank space (in any language): 20
For English: 4x, 5x, 6x, or 7x
For most of Western Europe, accented letters should be Cxyy
Cyrillic, Hebrew, and Farsi/Arabic: Dxyy
Most of Asia: Exyyzz
Emoji and some of Chinese: F0yyzzww
More details
Specific causes and fixes of the problems seen
Truncated text (Se for Señor):
The bytes to be stored are not encoded as utf8mb4. Fix this.
Also, check that the connection during reading is UTF-8.
Black Diamonds with question marks (Se�or for Señor);
one of these cases exists:
Case 1 (original bytes were not UTF-8):
The bytes to be stored are not encoded as utf8. Fix this.
The connection (or SET NAMES) for the INSERT and the SELECT was not utf8/utf8mb4. Fix this.
Also, check that the column in the database is CHARACTER SET utf8 (or utf8mb4).
Case 2 (original bytes were UTF-8):
The connection (or SET NAMES) for the SELECT was not utf8/utf8mb4. Fix this.
Also, check that the column in the database is CHARACTER SET utf8 (or utf8mb4).
Black diamonds occur only when the browser is set to <meta charset=UTF-8>.
Question Marks (regular ones, not black diamonds) (Se?or for Señor):
The bytes to be stored are not encoded as utf8/utf8mb4. Fix this.
The column in the database is not CHARACTER SET utf8 (or utf8mb4). Fix this. (Use SHOW CREATE TABLE.)
Also, check that the connection during reading is UTF-8.
Mojibake (Señor for Señor):
(This discussion also applies to Double Encoding, which is not necessarily visible.)
The bytes to be stored need to be UTF-8-encoded. Fix this.
The connection when INSERTing and SELECTing text needs to specify utf8 or utf8mb4. Fix this.
The column needs to be declared CHARACTER SET utf8 (or utf8mb4). Fix this.
HTML should start with <meta charset=UTF-8>.
If the data looks correct, but won't sort correctly, then
either you have picked the wrong collation,
or there is no collation that suits your need,
or you have Double Encoding.
Double Encoding can be confirmed by doing the SELECT .. HEX .. described above.
é should come back C3A9, but instead shows C383C2A9
The Emoji 👽 should come back F09F91BD, but comes back C3B0C5B8E28098C2BD
That is, the hex is about twice as long as it should be.
This is caused by converting from latin1 (or whatever) to utf8, then treating those
bytes as if they were latin1 and repeating the conversion.
The sorting (and comparing) does not work correctly because it is, for example,
sorting as if the string were Señor.
Fixing the Data, where possible
For Truncation and Question Marks, the data is lost.
For Mojibake / Double Encoding, ...
For Black Diamonds, ...
The Fixes are listed here. (5 different fixes for 5 different situations; pick carefully): http://mysql.rjweb.org/doc.php/charcoll#fixes_for_various_cases
I had similar issues with two of my projects, after a server migration. After searching and trying a lot of solutions, I came across with this one:
mysqli_set_charset($con,"utf8mb4");
After adding this line to my configuration file, everything works fine!
I found this solution for MySQLi—PHP mysqli set_charset() Function—when I was looking to solve an insert from an HTML query.
I was also searching for the same issue. It took me nearly one month to find the appropriate solution.
First of all, you will have to update you database will all the recent CHARACTER and COLLATION to utf8mb4 or at least which support UTF-8 data.
For Java:
while making a JDBC connection, add this to the connection URL useUnicode=yes&characterEncoding=UTF-8 as parameters and it will work.
For Python:
Before querying into the database, try enforcing this over the cursor
cursor.execute('SET NAMES utf8mb4')
cursor.execute("SET CHARACTER SET utf8mb4")
cursor.execute("SET character_set_connection=utf8mb4")
If it does not work, happy hunting for the right solution.
Set your code IDE language to UTF-8
Add <meta charset="utf-8"> to your webpage header where you collect data form.
Check your MySQL table definition looks like this:
CREATE TABLE your_table (
...
) ENGINE=InnoDB DEFAULT CHARSET=utf8
If you are using PDO, make sure
$options = array(PDO::MYSQL_ATTR_INIT_COMMAND=>'SET NAMES utf8');
$dbL = new PDO($pdo, $user, $pass, $options);
If you already got a large database with above problem, you can try SIDU to export with correct charset, and import back with UTF-8.
Depending on how the server is setup, you have to change the encode accordingly. utf8 from what you said should work the best. However, if you're getting weird characters, it might help if you change the webpage encoding to ANSI.
This helped me when I was setting up a PHP MySQLi. This might help you understand more: ANSI to UTF-8 in Notepad++
I tried to use UTF-8 and ran into trouble.
I have tried so many things; here are the results I have gotten:
???? instead of Asian characters. Even for European text, I got Se?or for Señor.
Strange gibberish (Mojibake?) such as Señor or 新浪新闻 for 新浪新闻.
Black diamonds, such as Se�or.
Finally, I got into a situation where the data was lost, or at least truncated: Se for Señor.
Even when I got text to look right, it did not sort correctly.
What am I doing wrong? How can I fix the code? Can I recover the data, if so, how?
This problem plagues the participants of this site, and many others.
You have listed the five main cases of CHARACTER SET troubles.
Best Practice
Going forward, it is best to use CHARACTER SET utf8mb4 and COLLATION utf8mb4_unicode_520_ci. (There is a newer version of the Unicode collation in the pipeline.)
utf8mb4 is a superset of utf8 in that it handles 4-byte utf8 codes, which are needed by Emoji and some of Chinese.
Outside of MySQL, "UTF-8" refers to all size encodings, hence effectively the same as MySQL's utf8mb4, not utf8.
I will try to use those spellings and capitalizations to distinguish inside versus outside MySQL in the following.
Overview of what you should do
Have your editor, etc. set to UTF-8.
HTML forms should start like <form accept-charset="UTF-8">.
Have your bytes encoded as UTF-8.
Establish UTF-8 as the encoding being used in the client.
Have the column/table declared CHARACTER SET utf8mb4 (Check with SHOW CREATE TABLE.)
<meta charset=UTF-8> at the beginning of HTML
Stored Routines acquire the current charset/collation. They may need rebuilding.
UTF-8 all the way through
More details for computer languages (and its following sections)
Test the data
Viewing the data with a tool or with SELECT cannot be trusted.
Too many such clients, especially browsers, try to compensate for incorrect encodings, and show you correct text even if the database is mangled.
So, pick a table and column that has some non-English text and do
SELECT col, HEX(col) FROM tbl WHERE ...
The HEX for correctly stored UTF-8 will be
For a blank space (in any language): 20
For English: 4x, 5x, 6x, or 7x
For most of Western Europe, accented letters should be Cxyy
Cyrillic, Hebrew, and Farsi/Arabic: Dxyy
Most of Asia: Exyyzz
Emoji and some of Chinese: F0yyzzww
More details
Specific causes and fixes of the problems seen
Truncated text (Se for Señor):
The bytes to be stored are not encoded as utf8mb4. Fix this.
Also, check that the connection during reading is UTF-8.
Black Diamonds with question marks (Se�or for Señor);
one of these cases exists:
Case 1 (original bytes were not UTF-8):
The bytes to be stored are not encoded as utf8. Fix this.
The connection (or SET NAMES) for the INSERT and the SELECT was not utf8/utf8mb4. Fix this.
Also, check that the column in the database is CHARACTER SET utf8 (or utf8mb4).
Case 2 (original bytes were UTF-8):
The connection (or SET NAMES) for the SELECT was not utf8/utf8mb4. Fix this.
Also, check that the column in the database is CHARACTER SET utf8 (or utf8mb4).
Black diamonds occur only when the browser is set to <meta charset=UTF-8>.
Question Marks (regular ones, not black diamonds) (Se?or for Señor):
The bytes to be stored are not encoded as utf8/utf8mb4. Fix this.
The column in the database is not CHARACTER SET utf8 (or utf8mb4). Fix this. (Use SHOW CREATE TABLE.)
Also, check that the connection during reading is UTF-8.
Mojibake (Señor for Señor):
(This discussion also applies to Double Encoding, which is not necessarily visible.)
The bytes to be stored need to be UTF-8-encoded. Fix this.
The connection when INSERTing and SELECTing text needs to specify utf8 or utf8mb4. Fix this.
The column needs to be declared CHARACTER SET utf8 (or utf8mb4). Fix this.
HTML should start with <meta charset=UTF-8>.
If the data looks correct, but won't sort correctly, then
either you have picked the wrong collation,
or there is no collation that suits your need,
or you have Double Encoding.
Double Encoding can be confirmed by doing the SELECT .. HEX .. described above.
é should come back C3A9, but instead shows C383C2A9
The Emoji 👽 should come back F09F91BD, but comes back C3B0C5B8E28098C2BD
That is, the hex is about twice as long as it should be.
This is caused by converting from latin1 (or whatever) to utf8, then treating those
bytes as if they were latin1 and repeating the conversion.
The sorting (and comparing) does not work correctly because it is, for example,
sorting as if the string were Señor.
Fixing the Data, where possible
For Truncation and Question Marks, the data is lost.
For Mojibake / Double Encoding, ...
For Black Diamonds, ...
The Fixes are listed here. (5 different fixes for 5 different situations; pick carefully): http://mysql.rjweb.org/doc.php/charcoll#fixes_for_various_cases
I had similar issues with two of my projects, after a server migration. After searching and trying a lot of solutions, I came across with this one:
mysqli_set_charset($con,"utf8mb4");
After adding this line to my configuration file, everything works fine!
I found this solution for MySQLi—PHP mysqli set_charset() Function—when I was looking to solve an insert from an HTML query.
I was also searching for the same issue. It took me nearly one month to find the appropriate solution.
First of all, you will have to update you database will all the recent CHARACTER and COLLATION to utf8mb4 or at least which support UTF-8 data.
For Java:
while making a JDBC connection, add this to the connection URL useUnicode=yes&characterEncoding=UTF-8 as parameters and it will work.
For Python:
Before querying into the database, try enforcing this over the cursor
cursor.execute('SET NAMES utf8mb4')
cursor.execute("SET CHARACTER SET utf8mb4")
cursor.execute("SET character_set_connection=utf8mb4")
If it does not work, happy hunting for the right solution.
Set your code IDE language to UTF-8
Add <meta charset="utf-8"> to your webpage header where you collect data form.
Check your MySQL table definition looks like this:
CREATE TABLE your_table (
...
) ENGINE=InnoDB DEFAULT CHARSET=utf8
If you are using PDO, make sure
$options = array(PDO::MYSQL_ATTR_INIT_COMMAND=>'SET NAMES utf8');
$dbL = new PDO($pdo, $user, $pass, $options);
If you already got a large database with above problem, you can try SIDU to export with correct charset, and import back with UTF-8.
Depending on how the server is setup, you have to change the encode accordingly. utf8 from what you said should work the best. However, if you're getting weird characters, it might help if you change the webpage encoding to ANSI.
This helped me when I was setting up a PHP MySQLi. This might help you understand more: ANSI to UTF-8 in Notepad++
Unfortunately all my databases (and Collations) are utf8_general_ci and I just recently learn it is better to use utf8_unicode_ci as it supports more Unicode characters accurately.
Will there be any issues if I use phpMyAdmin to change the Collations and database Table Charsets through their menus?
Also as I didn't know the importance of charsets, I have not been setting my MySQLi charsets for my database connection in PHP. Should I go through and do mysqli->set_charset("utf8") for all my connections? It is currently set as "latin1" by default. I assume this could be an issue as as I am storing as UTF8 but accepting latin1? (I am however declaring UTF8 on my html pages with
meta charset="utf-8"
I also read it might be better to go straight to utf8mb4? Again, would I have any issues changing that with phpMyAdmin and is it worth it? If I do go utf8mb4 do I have to do mysqli->set_charset('utf8mb4') ?
Thanks! I really should of done this to start.
Thanks!
CHARACTER SET is the encoding of the bytes. COLLATION is how characters are compared (for WHERE and ORDER BY).
You cannot trivially change either of those after the table is built. Instead you need to do some form of ALTER, probably ALTER ... CONVERT TO ....
The character set utf8mb4 has the advantage of handling all of Chinese (utf8 is missing some characters) and Emoji (the newer smileys).
The collation utf8_unicode_520_ci (or utf8mb4_unicode_520_ci for character set utf8mb4) is based on a newer Unicode standard, so it is arguably the 'best' available in MySQL.
So, yes,
ALTER TABLE tbl CONVERT TO CHARACTER SET utf8mb4 COLLATION utf8mb4_unicode_520_ci;
mysqli->set_charset('utf8mb4'); right after connecting.
In HTML, have <meta charset=UTF-8>
There is a chance that the CONVERT TO will come across "duplicate keys", since the _unicode_ collations work differently than *_general_ci. That won't happen for English, and won't happen for most of Europe. Two exceptions come to mind: the German ß in some UNIQUE or PRIMARY column, and any accented letters that are 'composed' of a 'non-spacing' accent together with a letter. (The latter is very rare.)