I'm having an issue was hoping I could get some help with configuring Atom and Xdebug. I can set breakpoints and they show up in the breakpoint panel, but the process never pauses. Oddly, the process does pause on a exception warning, so I know it's connecting somewhat, but just not pausing at breakpoints.
My php.ini is as described in the readme:
xdebug.remote_enable=1
xdebug.remote_host=127.0.0.1
xdebug.remote_connect_back=1 # Not safe for production servers
xdebug.remote_port=9000
xdebug.remote_handler=dbgp
xdebug.remote_mode=req
xdebug.remote_autostart=true
Here's my settings:
"php-debug":
PhpException:
Warning: false
PathMapping: [
{
local: "C:\\wamp\\www\\sgn\\com-forums\\www\\index.php"
remote: "localhost/sgn/com-forums/www/index.php"
}
]
I'm developing locally using WAMP with PHP 5.5.12, xdebug 2.3.5, Atom 1.2.3, & php-debug 0.1.4. As well, I'm using Chrome with Xdebug helper. What should the idekey be? Any ideas why it isn't working? Thank you for any assistance.
I am trying to get XDEBUG up and going but having trouble getting the cookie to show. Below is what is put in my php.ini file. I restarted apache. I did a phpinfo() call and I do see xdebug enabled and the settings set. But when I do a localhost/?XDEBUG_SESSION_START=1 I am expecting to see a Cookie set to 1 in my browser right ?
zend_extension ="/usr/lib/php/extensions/no-debug-non-zts-20100525/xdebug.so"
xdebug.remote_enable=1
xdebug.profiler_enable=1
xdebug.remote_handler=dbgp
xdebug.remote_mode=req
xdebug.remote_host=127.0.0.1
xdebug.remote_port=9000
xdebug.profiler_output_dir="/tmp"
when I run php -m I do not see it but I do see it in phpinfo
couldnt figure the exact answer but I went and downloaded the php.ini.default file from repo and set the following in the php ini
zend_extension ="/usr/lib/php/extensions/no-debug-non-zts-20100525/xdebug.so"
xdebug.remote_enable=On
xdebug.remote_host=localhost
xdebug.idekey=foo
xdebug.profiler_enable=On
and it worked. could of been because of remote host. who knows. it worked. this is the bare minimum configurations for mac and this is if your going by the follwing installations for xdebug on mac
http://kubyshkin.ru/posts/installing-php-xdebug-extension-on-mac-os-x-10-7-lion.html
I have setup a new dev environment using windows for the first time. I have WAMP installed and I am using netbeans as my IDE and have XDebug installed and reference in my php.ini file.
; XDEBUG Extension
zend_extension = "c:/wamp/bin/php/php5.4.12/zend_ext/php_xdebug-2.2.3-5.4-vc9-x86_64.dll"
which points to my xdebug.dll file.
When I try to debug within netbeans however, it is not stopping on any of my breakpoints. Any ideas of how to get it correctly debug by stopping at my breakpoints? Also just to verify that i am going to the page in question with my firefox browser so its not that I am not running the code
I added the following to my php.ini file and now debugging is stopping on my breakpoints in netbeans
xdebug.remote_autostart=on
xdebug.remote_enable=on
xdebug.remote_enable=1
xdebug.remote_handler="dbgp"
xdebug.remote_host="localhost"
xdebug.remote_port=9000
xdebug.remote_mode=req
xdebug.idekey="netbeans-xdebug"
After a good effort at trying to configure XDebug in PHPStorm on my mac, I still get the "waiting for incoming connection key..." I've seen this issue on the internet, but none of the solutions yielded success.
php.ini:
[xdebug]
zend_extension = /Applications/XAMPP/xamppfiles/lib/xedbug.so
xdebug.remote_enable=on
xdebug.remote_host=localhost
xdebug.remote_handler=dbgp
xdebug.remote_port=9000
Reference page for Xdebug setup: http://www.jetbrains.com/phpstorm/webhelp/configuring-xdebug.html
Check your php.ini config, the snippet you provide is not in line with the suggestions.
I had a similar issue - in my case I found a php.ini parse error by checking the apache error logs (in the console app). The error log may also help.
You might also make sure you have an "extensions_dir" directive in the php.ini pointing to the xdebug directory:
extension_dir = "/usr/lib/php/extensions/no-debug-non-zts-20100525"
This fixed my installation or in your case:
extension_dir = "/Applications/XAMPP/xamppfiles/lib"
My netbeans does not work the breakpoints using xdebug, my configuration looks correct, so I configured the first time I ran up to stop debugging the first time since then has never worked, someone had this problem? The version of my netbeans is 6.8 and the version of php is 2.5.2.
my php.ini:
zend_extension_ts = d:\wamp\bin\php\php5.2.5\ext\php_xdebug-2.0.2-5.2.5.dll
xdebug.remote_enable=on
xdebug.remote_handler=dbgp
xdebug.remote_host=localhost
xdebug.remote_port=9000
xdebug.idekey=netbeans-xdebug
xdebug.profiler_enable=1
In my case this line needed to be included in the php.ini:
xdebug.remote_autostart=on
Here is the configuration section for XDebug:
[xdebug]
xdebug.remote_enable = on
xdebug.remote_handler=dbgp
xdebug.remote_host=localhost
xdebug.remote_port=9000
xdebug.idekey="netbeans-xdebug"
xdebug.remote_autostart=on
xdebug.profiler_enable = on
xdebug.profiler_enable_trigger = on
xdebug.profiler_output_name = cachegrind.out.%t.%p
xdebug.profiler_output_dir = "d:/wamp/tmp"
Checklist for xdebug:
Check that xdebug is loaded in phpinfo(), and the runtime value matches expected configuration.
xdebug.remote_enable is on.
xdebug.extended_info should be on for breakpoints to work.
xdebug.remote_port must be same as ide and unused.
xdebug.remote_handler is dbgp.
xdebug.idekey should be set to same as ide's key if xdebug.remote_autostart is on.
Sometimes it help to set xdebug.remote_host to intranet IP or computer name instead of local ip 127.0.0.1. PHP must be allowed by Firewall to connect to this host and port.
Setting xdebug.remote_log to a file will help in checking what is wrong. Disable the log once debug is working.
Sample config:
[xdebug]
xdebug.extended_info=on
xdebug.remote_enable=on
xdebug.remote_handler=dbgp
xdebug.remote_host=localhost
xdebug.remote_port=9000
xdebug.remote_autostart=on
xdebug.idekey="netbeans-xdebug"
Checklist for NetBeans:
Firewall must allow Netbeans to listen for connection with configured host.
Tools -> Options -> PHP -> Debugging, check port. Also check session id if xdebug.remote_autostart is on.
Project type must be PHP.
Project Properties -> Source, web root must be correct.
Project Properties -> Run Configuration, index file need to be a php (or empty) for Ctrl+F5 to work.
Project Properties -> Run Configuration -> Advanced, debug url should be "Default" or "Ask Everytime".
Project Properties -> Run Configuration -> Advanced, path mapping must be correct. (e.g. empty if there are no mappings)
(Most default options work out of the box, so if you are desperate try to delete and recreate the project.)
False Instructions, tested on PHP 5.5 and xdebug 2.2:
PHP output_buffering does not need to be off. (But may help in debugging)
OPCache (Zend Cache) module can be loaded.
xdebug.profiler_enable can be enabled.
Please edit this answer if you found something new.
Check that you have the right version of Xdebug for your version of PHP (including Thread-safe/non-thread-safe and 64bit/32bit).
In some newer versions of PHP, you need to use zend_extension, not zend_extension_ts, regardless of whether you have the TS version of Xdebug.
(I am replying with an Answer since the formatting in comments wasn't working properly)
Same happened for me: worked once and then stopped. However, I reached a point in my config where it started working without problems and I can share.
First I moved on top of php.ini the ioncube loader:
[PHP]
zend_extension=/Applications/MAMP/bin/php5/zend/lib/ioncube_loader_dar_5.2.so
Then I put these lines in the xdebug config:
[xdebug]
zend_extension="/Applications/MAMP/bin/php5/lib/php/extensions/no-debug-non-zts-20060613/xdebug.so"
xdebug.default_enable=1
xdebug.remote_enable=1
xdebug.remote_handler=dbgp
xdebug.remote_host=localhost
xdebug.remote_port=9000
And commented out all the lines about Zend Optimizer
[Zend]
;zend_optimizer.optimization_level=15
;zend_extension_manager.optimizer=/Applications/MAMP/bin/php5/zend/lib/Optimizer-3.3.3
;zend_optimizer.version=3.3.3
I work on MAMP, this is why the paths to my libraries are referred to my MAMP folder.
Good luck
zend_extension = "C:\xampp\php\ext\php_xdebug-2.2.3-5.4-vc9.dll"xdebug.remote_enable = 1 xdebug.remote_handler = "dbgp"xdebug.remote_host = "localhost" xdebug.remote_port="9000" xdebug.remote_mode=req xdebug.trace_output_dir = "C:\xampp\tmp" xdebug.idekey="netbeans-xdebug"
this is working for me..
Here's how I was able to get it to work w/ mulitple PHP-FPM homebrew installations.
I used this excellent article for the multiple installations:
https://echo.co/blog/os-x-1010-yosemite-local-development-environment-apache-php-and-mysql-homebrew
In the comments of that post you'll see recommended how to install xdebug, bottom line:
brew install php56-xdebug
You have to install xdebug for each verions of PHP you have installed. Homebrew will make a xdebug.ini file for each version of php you installed. Each will have a path like:
/usr/local/etc/php/<version # i.e. "5.6">/conf.d/ext-xdebug.ini
This article installs DNSMasq which runs on xdebug's default port (9000), so you'll need to change the xdebug port to something else (9001 works fine.)
Edit the above mentioned ext-xdebug.ini file (or files if you installed more than one version of php.) Here's what works for me:
[xdebug]
zend_extension="/usr/local/opt/php56-xdebug/xdebug.so"
; General config
; Dumps local variables on exception
xdebug.show_local_vars=On
; Dump server variables
xdebug.dump.SERVER=*
; Dump global variables
xdebug.dump_globals=On
xdebug.collect_params=4;
; Tracing
;xdebug.auto_trace=On
;xdebug.trace_output_dir= /opt/local/php_traces/
xdebug.show_mem_delta=On
xdebug.collect_return=On
; Debugging. You might need to specify your host with some additional options
xdebug.remote_enable=1
: from http://devzone.zend.com/1147/debugging-php-applications-with-xdebug/
xdebug.remote_host="localhost"
xdebug.remote_port=9001
xdebug.remote_handler="dbgp"
The first two lines are all that is in the original homebrew file.
BTW - when I installed multiple PHP versions, this ext-xdebug.ini file was only created for the first PHP version I installed. I simply copied this file to the other PHP version locations, and changed the "php56-xdebug" part of the path in line 2 to reflect the proper php version.
Notice "xdebug.remote_port=9001"
Then in Netbeans (I'm using 8.02 Mac osX10.10.3) I use the following settings.
Go to Preferences->PHP->Debugging
Debugger Port: 9001
Stop at First Line: (unchecked)
Watches & Balloon Evaluation: (checked - there's a warning but it works fine for me.)
Also worth noticing is that in order for xdebug to show up using phpinfo() (or command line php -i) I need to restart apache with:
launchctl unload -Fw ~/Library/LaunchAgents/homebrew.mxcl.php56.plist
sudo apachectl restart
launchctl load -Fw ~/Library/LaunchAgents/homebrew.mxcl.php56.plist
For some reason my setup requires me to run this every time I startup. Kind of a pain, but I incorporated it in a shell command to easily switch between versions.
One more hint: part of brew info php56 says:
OS X 10.8 and newer come with php-fpm pre-installed, to ensure you are using
the brew version you need to make sure /usr/local/sbin is before /usr/sbin
in your PATH:
PATH="/usr/local/sbin:$PATH"
Until I added this to my .profile_bash file, changes I made to each version's php-fpm.conf file were not recognized. Everything else seemed to work so it was confusing.
Hope this saves someone else time & trouble.
If you are still stuck you could try the following:
Download a new version of xdebug via the wizard (http://www.xdebug.org/wizard.php) and if you follow the instructions maybe you will be lucky.
Switching off the firewall might help.
Use a different port in netbeans, for instance in my case using 9001 in netbeans and 9000 in xdebug worked.
Add to php.ini file: xdebug.idekey=netbeans-xdebug.
Find out if you have a xdebug.ini file and add the xdebug related php.ini lines to that file.
Always make sure that you restart your apache service to test everything.
In my case - host is on another server, Net-beans 11 - I need to open terminal to remotehost
Window -> IDE Tools -> Terminal -> Remote Terminal
P.S. If u type export XDEBUG_CONFIG="idekey=netbeans-xdebug" in that terminal, and start debugging session, u can debug console scripts