I am configuring website outside the htdocs and I did all changes what are describe here Virtual Host.
But partially it done but routes are not working. Only Home page showing. rest of page showing Object not found!.
like
<VirtualHost *:81>
DocumentRoot "C:\DevlopmentApps\VirtualMarket"
ServerName sjb.localhost
<Directory C:\DevlopmentApps\VirtualMarket>
Options Indexes
AllowOverride none
Require all granted
</Directory>
Now
http://sjb.localhost:81/sjb is working
http://sjb.localhost:81/sjb/find/ not working
Now i figure out some thing that other should be aware with.
If want to configure outside the htdocs the need to do following steps in the follwong link
Virtual host
Here is some thing Deprecated. https://stackoverflow.com/questions/9110179/adding-virtualhost-fails-access-forbidden-error-403-xampp-windows-7?answertab=votes#tab-top
<Directory ..........>
# AllowOverride All # Deprecated
# Order Allow,Deny # Deprecated
# Allow from all # Deprecated
# --New way of doing it
Require all granted
</Directory>
Now one thing which fixed my issue is
Options All
AllowOverride All
Require all granted
Related
I'm new to Linux and PHP and I'm trying to access a Laravel app from another device.
Server is running a Centos and it's IP is 192.168.1.250 and my Laravel directory is /var/www/html/vls.
At first it was showing directory listing when I wen to 192.168.1.250/vls in my browser. After some search I added these lines to httpd.con:
<Directory /var/www/html/vls>
Options Indexes FollowSymLinks
AllowOverride All
Require all granted
</Directory>
<VirtualHost *:80>
DocumentRoot "/var/www/html/vls/public"
ServerName vls.dev
<Directory /var/www/html/vls/>
AllowOverride All
Order deny,allow
Allow from all
Require all granted
</Directory>
</VirtualHost>
Now when I go to 192.168.1.250/vls it shows index.php content as text in browser.
I even followed the solution described here:
How to stop laravel directory browsing
But then it showed directory listing of /public directory.
Any help is appreciated in advance.
EDIT:
If I make a directory and place an index.php code that includes some PHP code it works fine. But Laravel app doesn't work and shows index.php code on the browser.
Change your dir from <Directory /var/www/html/vls/> to <Directory /var/www/html/vls/public>
I am running a page based on Flask and Apache2/MOD_Wsgi and am wanting to also deploy a page using PHP (a IDE called Codiad). Flask as my main page ( enjay.work ) and I want Codiad to run on enjay.work/codiad
Unfortunately I have the most basic understanding of Apache config and don't know at all how to find what I need.
Here is what I have so far:
<virtualhost *:80>
ServerName enjay.work
DocumentRoot /home/nathan/www/enjay
WSGIDaemonProcess enjay user=nathan group=www-data threads=5 home=/home/nathan/www
WSGIScriptAlias / /home/nathan/www/enjay/enjay.wsgi
<Directory /Codiad>
Options indexes FollowSymlinks MultiViews
AllowOverride All
Require all granted
Allow from all
</Directory>
<Directory />
WSGIProcessGroup enjay
WSGIApplicationGroup %{GLOBAL}
WSGIScriptReloading On
Require all granted
</Directory>
</virtualhost>
now when I navigate to enjay.work/Codiad I get a 404 page. for the php project I am adding to my site I followed these directions (loosly)
I can get just the python to work, or just the PHP to work, when I combine the two Config files I get the Python page but the path that should return the PHP gives me a 404
Change the configuration for your PHP page to point directly at the project (in this case /home/nathan/www/enjay/Codiad) then above that configuration add an alias for the web address you want
Alias /Codiad "/home/nathan/www/enjay/Codiad"
<Directory /home/nathan/www/enjay/Codiad>
**Existing Config**
</Directory>
I think it should be like this.
<Directory /home/nathan/www/enjay>
Options indexes FollowSymlinks MultiViews
AllowOverride All
Require all granted
Allow from all
</Directory>
Having issues with XAMPP and access forbidden problems.
Started using laravel, complete noob to anything MVC but thought I'd give it a go.
Started having issues with page routing, index page works fine, yet non of my routes work, all come up with a 404 error.
Have a little search around the internet, find out it could be due to my xampp/Apache config.
Had a play with the
Allow from all
and
Require all granted
options, but no dice.
This is my vhosts entry:
<VirtualHost *:80>
DocumentRoot "C:\Users\xxx\Desktop\Projects\xxx\Website-3.0\Website\public"
ServerName gw3.dev
<Directory "C:\Users\xxx\Desktop\Projects\xxx\Website-3.0\Website\public">
Allow from all
Require all granted
Options Indexes
</Directory>
</VirtualHost>
and this is what I edited in the httpd.conf file.
<Directory />
Require all granted
Options FollowSymLinks
AllowOverride All
Allow from all
</Directory>
Made sure that the root directory is not read only.
Yet all I get are 403 - forbidden access errors.
Running Windows 10, fyi.
Not really sure where I'm going wrong here. Is there something I'm missing?
This section
<Directory />
Require all granted
Options FollowSymLinks
AllowOverride All
Allow from all
</Directory>
Provides the basic security for the disk that Apache is installed on. Basic practice is deny access to everything and then allow access to only those directories that Apache should have access to. Also you are using Pache 2.2. and 2.4 syntax together, bad.
So change that back to :-
<Directory />
AllowOverride none
Require all denied
</Directory>
In the definition of the virtual host you are using both Apache 2.2 and 2.4 syntax. Thats not a good idea it can cause Apache to get confused. Also you are using the DOS back slash and that should be the unix forward slash.
So try this
<VirtualHost *:80>
DocumentRoot "C:/Users/xxx/Desktop/Projects/xxx/Website-3.0/Website/public"
ServerName gw3.dev
<Directory "C:/Users/xxx/Desktop/Projects/xxx/Website-3.0/Website/public">
AllowOverride All
Options Indexes FollowSymLinks
Require all granted
</Directory>
</VirtualHost>
If you dont actually intend to allow anybody in the universe to access this site then you can use
Require local
Or if you want to access the site from another device in your local network you could try
Require ip 192.168.1
Note use of only 3 of the 4 quartiles of the IPV4 ip address. This allows access from any ip in that subnet.
Also make sure that you have added gw3.dev to your HOSTS file for both IPV4 and IPV6 addresses
127.0.0.1 gw3.dev
::1 gw3.dev
Retart Apache and try that.
You need
AllowOverride All
too in vhost
also dont forget to reboot the server
I installed Wamp Server on Windows 8. I then installed a php web application.
I can access it by going http:// localhost/webapp or http:// localhost/phpmyadmin
I want to be able to access this web app from different computers on the same network.
The problem is when I try to visit my web app via this http:// 192.168.133.221/webapp (which is my local ip address) or http:// mypc/webapp (which is my PC's name) - I get the following error
403 Forbidden You don't have permission to access /fengoffice on this
server.
I have disabled both windows firewall and Kaspersky's firewall but still getting the same error.
Any advise?
Salim was on the right track, but he is rather giving away all the crown jewels.
Do not make this change to httpd.conf as it is not necessary to open the wamp home folder up to the world! As this would allow access to your new site, but also any other site you may then want to develop in another folder below c:\wamp\www.
<Directory "C:/wamp/www">
Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride All
Order allow,deny
Allow from all
</Directory>
Replace it with the original, like this
<Directory "C:/wamp/www">
Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride All
Order Deny,Allow
Deny from all
</Directory>
To allow your one site to be accessed from just your internal network, do this. Under the previous section add a new <Directory> block. ( change the folder name webapp as appropriate for your directory name )
<Directory "C:/wamp/www/webapp">
Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride All
Order Deny,Allow
Deny from all
Allow from 127.0.0.1 localhost ::1
Allow from 192.168.133
</Directory>
This will allow access from the PC running WAMP AND any ip address on your subnet i.e. all the PC's inside your router. BUT NOT THE WORLD!
You can be more specific if you want and add as many individual IP address's as are required by:
Allow from 192.168.133.1 192.168.133.2 192.168.133.3
Now to allow access to phpMyAdmin from your internal network we use the same idea in the config for phpMyAdmin
Edit c:\wamp\alias\phpmyadmin.conf and make simpliar changes.
<Directory "c:/wamp/apps/phpmyadmin4.0.6/">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
Order Deny,Allow
Deny from all
Allow from 127.0.0.1 ::1 localhost
Allow from 192.168.133
</Directory>
This way when you decide to open up your router to the world ( port forward port 80 ) so your site is visible to friends/the world you can change the section of code that relates to your sites folder i.e. C:/wamp/www/webapp but external users will not be able to access your wamp homepage or more inportantly your phpMyAdmin and therefore ALL your databases.
And one final thing, you will also have to change the MYSQL userid that you are using ( probably root, although it would be better to create another userid ) so that it is allowed access from a PC that is not on the main WAMP PC.
This may help you with that Add host to mysql user
EDIT: Apache 2.4.x Equivalents
No longer required
Order Deny,Allow
Replece:
Allow from 127.0.0.1 ::1 localhost
with
Require local
Replace:
Allow from 192.168.133
with
Require ip 192.168.133
Replece:
Allow from all
with
Require all granted
Without 127.0.0.1 from all IP address your Apache server is forbidden to access.
Open httpd.conf(Apachee config file) file from where you have installed Wamp Server and see in this file
<Directory "C:/wamp/www/">
Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride all
Order Deny,Allow
Deny from all
Allow from 127.0.0.1
</Directory>
And
<Directory "c:/wamp/apps/phpmyadmin3.4.5/">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
Order Deny,Allow
Deny from all
Allow from 127.0.0.1
</Directory>
C:/wamp/www will be as your installed location
Change it to
<Directory "C:/wamp/www">
Options Indexes FollowSymLinks Includes ExecCGI
AllowOverride All
Order allow,deny
Allow from all
</Directory>
And
<Directory "c:/wamp/apps/phpmyadmin3.4.5/">
Options Indexes FollowSymLinks MultiViews
AllowOverride All
Order allow,deny
Allow from all
</Directory>
And restart service.
I just installed WAP 2.2 d, on my local machine. It runs on Wndows 7 Starter. The installation was done smoothly. Then when I hit the URL localhost/phpmyadmin it gave me a message
**Forbidden**
You don't have permission to access /phpmyadmin/on this server.
Then after doing some research on this issue I found one solution as to make the change in file wamp/alias/phpmyadmin.conf
The initial lines were
<Directory "c:/wamp/apps/phpmyadmin3.4.10.1/">
Options Indexes FollowSymLinks MultiViews
Order Deny, Allow
Deny from all
Allow from 127.0.0.1
</Directory>
I changed these line to following lines:
<Directory "c:/wamp/apps/phpmyadmin3.4.10.1/">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
Order Allow, Deny
Allow from all
</Directory>
Then the phpMyadmin started working properly at URL localhost/phpmyadmin
After that I copied my directory 'XYZ' containing small project of PHP. Hit the URL localhost/XYZ, then it was expected to run the index.php file from the folder XYZ but it's still giving me the error
**Forbidden**
You don't have permission to access /XYZ on this server.
Can you help me to resolve this issue and run the system properly. Except above change to wamp/alias/phpmyadmin.conf I've not done any change to any of configuration file. Thanks in advance.
You must allow access to your XYZ directory in Apache configuration file httpd.conf:
<Directory "c:/wamp/apps/XYZ">
Options Indexes FollowSymLinks MultiViews
AllowOverride all
Order Allow, Deny
Allow from all
</Directory>
The reason for this problem is most likely because W7 has IPV4 and IPV6 enabled.
Apache is happy to listen to both ranges of port numbers, and by default does.
A better more secure solution would be:
<Directory "c:/wamp/apps/phpmyadmin3.4.10.1/">
Options Indexes FollowSymLinks MultiViews
Require local
</Directory>
Require local is like saying Allow from 127.0.0.1 localhost ::1 i.e. both IP Address ranges alias's for this PC.
Also if you do as you did and Allow from all when you decide to show a friend what you have done and open you router so the world can see your new site, they will also be given access to phpMyAdmin making a hackers life really easy
Secondly, you do not make the change suggested by #user4035, instead edit the httpd.conf and look for this section
<Directory "d:/wamp/www/">
Where is says,
Order Deny,Allow
Deny from all
Allow from 127.0.0.1
Change it in the same way as above, to
Require local
For the same security reason as above. When the time comes to show the world your site you can add the
<Directory "c:/wamp/apps/XYZ">
Options Indexes FollowSymLinks MultiViews
Require all granted
</Directory>
To allow anybody to see just that website but nothing else.