Related
I tried to import a large sql file but its not getting imported.
And it shows the following error.
phpMyAdmin - Error
Incorrect format parameter
I have been using Xampp-php 5.6 in ubuntu16.04.
I have tried these links given below already but none of it worked.
https://www.webtrickshome.com/forum/how-to-fix-phpmyadmin-error-incorrect-format-parameter-that-appeared-while-importing-a-database
importing db phpMyAdmin - Error Incorrect format parameter
Importing large database file in MAMP phpMyAdmin
You can easily import using cmd promt
mysql -u username(of phpmyadmin) -p database_name < file_path/file_name.sql
you can also do the changes in php.ini file to increase upload size of phpmyadmin.
in php.ini of your PHP installation (note: depending if you want it for CLI, Apache, or Nginx, find the right php.ini to manipulate)
post_max_size=500M
upload_max_filesize=500M
memory_limit=900M
or set other values.
Restart/reload apache if you have apache installed or php-fpm for nginx if you use nginx.
Remote server?
increase max_execution_time as well, as it will take time to upload the file.
NGINX installation?
you will have to add: client_max_body_size 912M; in /etc/nginx/nginx.conf to the http{...} block
I was facing the same problem when I was trying to import a 90mb database. You can solve this problem by opening
xampp->phpMyadmin->libraries->config.default.php
after opening the file search for $cfg['ExecTimeLimit'] = 300;
Here you can set the time to 1000 or whatever you want after the equal sign. The default value is 300.
thanks for thi answer
post_max_size=500M
upload_max_filesize=500M
memory_limit=900M
There file format can be .sql.zip
Shown in the attached picture. It happened to me.
After reaching so many entries PhpMyAdmin started showing this warning:
Warning: a form on this page has more than 1000 fields. On submission, >some of the fields might be ignored, due to PHP's max_input_vars >configuration.
I have tried to change out the field from 1000 to 10000, then restarted php.ini.
[ ok ] Restarting php7.0-fpm (via systemctl): php7.0-fpm.service.
/etc/init.d/php7.0-fpm restart
Nothing seems to work so I can export mysql database. Please help me get this correct so I can get this database exported. Many thanks.
Solution Found.
First of, be sure that you are editing the right php.ini file. To do that you can check what it is with phpinfo().
Then restart php to reload php.ini, depending on how you installed it, it could be done like that :
brew services restart php72
Restart apache as well to be sure :
sudo apachectl -k restart
Then put the following statement in a test.php file :
echo ini_get('max_input_vars'); and check it.
At this point you will see it is correctly updated.
If you still have phpmyadmin showing error after that, you should then hard refresh your phpmyadmin page : it can be done with CMD+SHIFT+R on a Mac.
The reason for this is that phpmyadmin's local javascript file is gettting passed the value of max_input_vars from php and is responsible for deciding to display the error or not. So if the javascript local file isn't updated for caching reasons for example, then you just have to refresh it and problem gone : )
I tried to import a large sql file through phpMyAdmin...But it kept showing error
'MySql server has gone away'
What to do?
As stated here:
Two most common reasons (and fixes) for the MySQL server has gone away
(error 2006) are:
Server timed out and closed the connection. How to fix:
check that wait_timeout variable in your mysqld’s my.cnf configuration file is large enough. On Debian: sudo nano
/etc/mysql/my.cnf, set wait_timeout = 600 seconds (you can
tweak/decrease this value when error 2006 is gone), then sudo
/etc/init.d/mysql restart. I didn't check, but the default value for
wait_timeout might be around 28800 seconds (8 hours).
Server dropped an incorrect or too large packet. If mysqld gets a packet that is too large or incorrect, it assumes that something has
gone wrong with the client and closes the connection. You can increase
the maximal packet size limit by increasing the value of
max_allowed_packet in my.cnf file. On Debian: sudo nano
/etc/mysql/my.cnf, set max_allowed_packet = 64M (you can
tweak/decrease this value when error 2006 is gone), then sudo
/etc/init.d/mysql restart.
Edit:
Notice that MySQL option files do not have their commands already available as comments (like in php.ini for instance). So you must type any change/tweak in my.cnf or my.ini and place them in mysql/data directory or in any of the other paths, under the proper group of options such as [client], [myslqd], etc. For example:
[mysqld]
wait_timeout = 600
max_allowed_packet = 64M
Then restart the server. To get their values, type in the mysql client:
> select ##wait_timeout;
> select ##max_allowed_packet;
For me this solution didn't work out so I executed
SET GLOBAL max_allowed_packet=1073741824;
in my SQL client.
If not able to change this with MYSql service running, you should stop the service and change the variable in "my.ini" file.
For example:
max_allowed_packet=20M
If you are working on XAMPP then you can fix the MySQL Server has gone away issue with following changes..
open your my.ini file
my.ini location is (D:\xampp\mysql\bin\my.ini)
change the following variable values
max_allowed_packet = 64M
innodb_lock_wait_timeout = 500
If you are running with default values then you have a lot of room to optimize your mysql configuration.
The first step I recommend is to increase the max_allowed_packet to 128M.
Then download the MySQL Tuning Primer script and run it. It will provide recommendations to several facets of your config for better performance.
Also look into adjusting your timeout values both in MySQL and PHP.
How big (file size) is the file you are importing and are you able to import the file using the mysql command line client instead of PHPMyAdmin?
If you are using MAMP on OS X, you will need to change the max_allowed_packet value in the template for MySQL.
You can find it at: File > Edit template > MySQL my.cnf
Then just search for max_allowed_packet, change the value and
save.
I had this error and other related ones, when I imported at 16 GB SQL file. For me, editing my.ini and setting the following (based on several different posts) in the [mysqld] section:
max_allowed_packet = 110M
innodb_buffer_pool_size=511M
innodb_log_file_size=500M
innodb_log_buffer_size = 800M
net_read_timeout = 600
net_write_timeout = 600
If you are running under Windows, go to the control panel, services, and look at the details for MySQL and you will see where my.ini is. Then after you edit and save my.ini, restart the mysql service (or restart the computer).
If you are using HeidiSQL, you can also set some or all of these using that.
I solved my issue with this short /etc/mysql/my.cnf file :
[mysqld]
wait_timeout = 600
max_allowed_packet = 100M
The other reason this can happen is running out of memory. Check /var/log/messages and make sure that your my.cnf is not set up to cause mysqld to allocate more memory than your machine has.
Your mysqld process can actually be killed by the kernel and then re-started by the "safe_mysqld" process without you realizing it.
Use top and watch the memory allocation while it's running to see what your headroom is.
make a backup of my.cnf before changing it.
I got same issue with
$image_base64 = base64_encode(file_get_contents($_FILES['file']['tmp_name']) );
$image = 'data:image/jpeg;base64,'.$image_base64;
$query = "insert into images(image) values('".$image."')";
mysqli_query($con,$query);
In \xampp\mysql\bin\my.ini file of phpmyadmin we get only
[mysqldump]
max_allowed_packet=110M
which is just for mysqldump -u root -p dbname . I resolved my issue by replacing above code with
max_allowed_packet=110M
[mysqldump]
max_allowed_packet=110M
I updated "max_allowed_packet" to 1024M, but it still wasn't working. It turns out my deployment script was running:
mysql --max_allowed_packet=512M --database=mydb -u root < .\db\db.sql
Be sure to explicitly specify a bigger number from the command line if you are donig it this way.
If your data includes BLOB data:
Note that an import of data from the command line seems to choke on BLOB data, resulting in the 'MySQL server has gone away' error.
To avoid this, re-create the mysqldump but with the --hex-blob flag:
http://dev.mysql.com/doc/refman/5.7/en/mysqldump.html#option_mysqldump_hex-blob
which will write out the data file with hex values rather than binary amongst other text.
PhpMyAdmin also has the option "Dump binary columns in hexadecimal notation (for example, "abc" becomes 0x616263)" which works nicely.
Note that there is a long-standing bug (as of December 2015) which means that GEOM columns are not converted:
Back up a table with a GEOMETRY column using mysqldump?
so using a program like PhpMyAdmin seems to be the only workaround (the option noted above does correctly convert GEOM columns).
If it takes a long time to fail, then enlarge the wait_timeout variable.
If it fails right away, enlarge the max_allowed_packet variable; it it still doesn't work, make sure the command is valid SQL. Mine had unescaped quotes which screwed everything up.
Also, if feasible, consider limiting the number of inserts of a single SQL command to, say, 1000. You can create a script that creates multiple statements out of a single one by reintroducing the INSERT... part every n inserts.
i got a similar error.. to solve this just open my.ini file..here at line no 36 change the value of maximum allowed packet size ie. max_allowed_packet = 20M
Make sure mysqld process does not restart because of service managers like systemd.
I had this problem in vagrant with centos 7. Configuration tweaks didn't help. Turned out it was systemd which killed mysqld service every time when it took too much memory.
I had similar error today when duplicating database (MySQL server has gone away...), but when I tried to restart mysql.server restart I got error
ERROR! The server quit without updating PID ...
This is how I solved it:
I opened up Applications/Utilities/ and ran Activity Monitor
quit mysqld
then was able to solve the error problem with
mysql.server restart
I am doing some large calculations which involves the mysql connection to stay long time and with heavy data. i was facing this "Mysql go away issue". So i tried t optimize the queries but that doen't helped me then i increased the mysql variables limit which is set to a lower value by default.
wait_timeout
max_allowed_packet
To the limit what ever suits to you it should be the Any Number * 1024(Bytes). you can login to terminal using 'mysql -u username - p' command and can check and change for these variable limits.
For GoDaddy shared hosting
On GoDaddy shared hosting accounts, it is tricky to tweak the PHP.ini etc files. However, there is another way and it just worked perfectly for me. (I just successfully uploaded a 3.8Mb .sql text file, containing 3100 rows and 145 cols. Using the IMPORT command in phpMyAdmin, I was getting the dreaded MySQL server has gone away error, and no further information.)
I found that Matt Butcher had the right answer. Like Matt, I had tried all kinds of tricks, from exporting MySQL databases in bite-sized chunks, to writing scripts that break large imports into smaller ones. But here is what worked:
(1) CPANEL ---> FILES (group) ---> BACKUP
(2a) Under "Partial Backups" heading...
(2b) Under "Download a MySQL Database Backup"
(2c) Choose your database and download a backup (this step optional, but wise)
(3a) Directly to the right of 2b, under heading "Restore a MySQL Database Backup"
(3b) Choose the .SQL import file from your local drive
(3c) True happiness will be yours (shortly....) Mine took about 5 seconds
I was able to use this method to import a single table. Nothing else in my database was affected -- but that is what step (2) above is intended to protect against.
Notes:
a. If you are unsure how to create a .SQL import file, use phpMyAdmin to export a table and modify that file structure.
SOURCE:
Matt Butcher 2010 Article
If increasing max_allowed_packet doesn't help.
I was getting the same error as you when importing a .sql file into my database via Sequel Pro.
The error still persisted after upping the max_allowed_packet to 512M so I ran the import in the command line instead with:
mysql --verbose -u root -p DatabaseName < MySQL.sql
It gave the following error:
ASCII '\0' appeared in the statement, but this is not allowed unless option --binary-mode is enabled
I found a couple helpful StackOverflow questions:
Enable binary mode while restoring a Database from an SQL dump
Mysql ERROR: ASCII '\0' while importing sql file on linux server
In my case, my .sql file was a little corrupt or something. The MySQL dump we get comes in two zip files that need to be concatenated together and then unzipped. I think the unzipping was interrupted initially, leaving the file with some odd characters and encodings. Getting a fresh MySQL dump and unzipping it properly worked for me.
Just wanted to add this here in case others find that increasing the max_allowed_packet variable was not helping.
None of the solutions regarding packet size or timeouts made any difference for me. I needed to disable ssl
mysql -u -p -hmyhost.com --disable-ssl db < file.sql
https://dev.mysql.com/doc/refman/5.7/en/encrypted-connections.html
I tried to import a large sql file through phpMyAdmin...But it kept showing error
'MySql server has gone away'
What to do?
As stated here:
Two most common reasons (and fixes) for the MySQL server has gone away
(error 2006) are:
Server timed out and closed the connection. How to fix:
check that wait_timeout variable in your mysqld’s my.cnf configuration file is large enough. On Debian: sudo nano
/etc/mysql/my.cnf, set wait_timeout = 600 seconds (you can
tweak/decrease this value when error 2006 is gone), then sudo
/etc/init.d/mysql restart. I didn't check, but the default value for
wait_timeout might be around 28800 seconds (8 hours).
Server dropped an incorrect or too large packet. If mysqld gets a packet that is too large or incorrect, it assumes that something has
gone wrong with the client and closes the connection. You can increase
the maximal packet size limit by increasing the value of
max_allowed_packet in my.cnf file. On Debian: sudo nano
/etc/mysql/my.cnf, set max_allowed_packet = 64M (you can
tweak/decrease this value when error 2006 is gone), then sudo
/etc/init.d/mysql restart.
Edit:
Notice that MySQL option files do not have their commands already available as comments (like in php.ini for instance). So you must type any change/tweak in my.cnf or my.ini and place them in mysql/data directory or in any of the other paths, under the proper group of options such as [client], [myslqd], etc. For example:
[mysqld]
wait_timeout = 600
max_allowed_packet = 64M
Then restart the server. To get their values, type in the mysql client:
> select ##wait_timeout;
> select ##max_allowed_packet;
For me this solution didn't work out so I executed
SET GLOBAL max_allowed_packet=1073741824;
in my SQL client.
If not able to change this with MYSql service running, you should stop the service and change the variable in "my.ini" file.
For example:
max_allowed_packet=20M
If you are working on XAMPP then you can fix the MySQL Server has gone away issue with following changes..
open your my.ini file
my.ini location is (D:\xampp\mysql\bin\my.ini)
change the following variable values
max_allowed_packet = 64M
innodb_lock_wait_timeout = 500
If you are running with default values then you have a lot of room to optimize your mysql configuration.
The first step I recommend is to increase the max_allowed_packet to 128M.
Then download the MySQL Tuning Primer script and run it. It will provide recommendations to several facets of your config for better performance.
Also look into adjusting your timeout values both in MySQL and PHP.
How big (file size) is the file you are importing and are you able to import the file using the mysql command line client instead of PHPMyAdmin?
If you are using MAMP on OS X, you will need to change the max_allowed_packet value in the template for MySQL.
You can find it at: File > Edit template > MySQL my.cnf
Then just search for max_allowed_packet, change the value and
save.
I had this error and other related ones, when I imported at 16 GB SQL file. For me, editing my.ini and setting the following (based on several different posts) in the [mysqld] section:
max_allowed_packet = 110M
innodb_buffer_pool_size=511M
innodb_log_file_size=500M
innodb_log_buffer_size = 800M
net_read_timeout = 600
net_write_timeout = 600
If you are running under Windows, go to the control panel, services, and look at the details for MySQL and you will see where my.ini is. Then after you edit and save my.ini, restart the mysql service (or restart the computer).
If you are using HeidiSQL, you can also set some or all of these using that.
I solved my issue with this short /etc/mysql/my.cnf file :
[mysqld]
wait_timeout = 600
max_allowed_packet = 100M
The other reason this can happen is running out of memory. Check /var/log/messages and make sure that your my.cnf is not set up to cause mysqld to allocate more memory than your machine has.
Your mysqld process can actually be killed by the kernel and then re-started by the "safe_mysqld" process without you realizing it.
Use top and watch the memory allocation while it's running to see what your headroom is.
make a backup of my.cnf before changing it.
I got same issue with
$image_base64 = base64_encode(file_get_contents($_FILES['file']['tmp_name']) );
$image = 'data:image/jpeg;base64,'.$image_base64;
$query = "insert into images(image) values('".$image."')";
mysqli_query($con,$query);
In \xampp\mysql\bin\my.ini file of phpmyadmin we get only
[mysqldump]
max_allowed_packet=110M
which is just for mysqldump -u root -p dbname . I resolved my issue by replacing above code with
max_allowed_packet=110M
[mysqldump]
max_allowed_packet=110M
I updated "max_allowed_packet" to 1024M, but it still wasn't working. It turns out my deployment script was running:
mysql --max_allowed_packet=512M --database=mydb -u root < .\db\db.sql
Be sure to explicitly specify a bigger number from the command line if you are donig it this way.
If your data includes BLOB data:
Note that an import of data from the command line seems to choke on BLOB data, resulting in the 'MySQL server has gone away' error.
To avoid this, re-create the mysqldump but with the --hex-blob flag:
http://dev.mysql.com/doc/refman/5.7/en/mysqldump.html#option_mysqldump_hex-blob
which will write out the data file with hex values rather than binary amongst other text.
PhpMyAdmin also has the option "Dump binary columns in hexadecimal notation (for example, "abc" becomes 0x616263)" which works nicely.
Note that there is a long-standing bug (as of December 2015) which means that GEOM columns are not converted:
Back up a table with a GEOMETRY column using mysqldump?
so using a program like PhpMyAdmin seems to be the only workaround (the option noted above does correctly convert GEOM columns).
If it takes a long time to fail, then enlarge the wait_timeout variable.
If it fails right away, enlarge the max_allowed_packet variable; it it still doesn't work, make sure the command is valid SQL. Mine had unescaped quotes which screwed everything up.
Also, if feasible, consider limiting the number of inserts of a single SQL command to, say, 1000. You can create a script that creates multiple statements out of a single one by reintroducing the INSERT... part every n inserts.
i got a similar error.. to solve this just open my.ini file..here at line no 36 change the value of maximum allowed packet size ie. max_allowed_packet = 20M
Make sure mysqld process does not restart because of service managers like systemd.
I had this problem in vagrant with centos 7. Configuration tweaks didn't help. Turned out it was systemd which killed mysqld service every time when it took too much memory.
I had similar error today when duplicating database (MySQL server has gone away...), but when I tried to restart mysql.server restart I got error
ERROR! The server quit without updating PID ...
This is how I solved it:
I opened up Applications/Utilities/ and ran Activity Monitor
quit mysqld
then was able to solve the error problem with
mysql.server restart
I am doing some large calculations which involves the mysql connection to stay long time and with heavy data. i was facing this "Mysql go away issue". So i tried t optimize the queries but that doen't helped me then i increased the mysql variables limit which is set to a lower value by default.
wait_timeout
max_allowed_packet
To the limit what ever suits to you it should be the Any Number * 1024(Bytes). you can login to terminal using 'mysql -u username - p' command and can check and change for these variable limits.
For GoDaddy shared hosting
On GoDaddy shared hosting accounts, it is tricky to tweak the PHP.ini etc files. However, there is another way and it just worked perfectly for me. (I just successfully uploaded a 3.8Mb .sql text file, containing 3100 rows and 145 cols. Using the IMPORT command in phpMyAdmin, I was getting the dreaded MySQL server has gone away error, and no further information.)
I found that Matt Butcher had the right answer. Like Matt, I had tried all kinds of tricks, from exporting MySQL databases in bite-sized chunks, to writing scripts that break large imports into smaller ones. But here is what worked:
(1) CPANEL ---> FILES (group) ---> BACKUP
(2a) Under "Partial Backups" heading...
(2b) Under "Download a MySQL Database Backup"
(2c) Choose your database and download a backup (this step optional, but wise)
(3a) Directly to the right of 2b, under heading "Restore a MySQL Database Backup"
(3b) Choose the .SQL import file from your local drive
(3c) True happiness will be yours (shortly....) Mine took about 5 seconds
I was able to use this method to import a single table. Nothing else in my database was affected -- but that is what step (2) above is intended to protect against.
Notes:
a. If you are unsure how to create a .SQL import file, use phpMyAdmin to export a table and modify that file structure.
SOURCE:
Matt Butcher 2010 Article
If increasing max_allowed_packet doesn't help.
I was getting the same error as you when importing a .sql file into my database via Sequel Pro.
The error still persisted after upping the max_allowed_packet to 512M so I ran the import in the command line instead with:
mysql --verbose -u root -p DatabaseName < MySQL.sql
It gave the following error:
ASCII '\0' appeared in the statement, but this is not allowed unless option --binary-mode is enabled
I found a couple helpful StackOverflow questions:
Enable binary mode while restoring a Database from an SQL dump
Mysql ERROR: ASCII '\0' while importing sql file on linux server
In my case, my .sql file was a little corrupt or something. The MySQL dump we get comes in two zip files that need to be concatenated together and then unzipped. I think the unzipping was interrupted initially, leaving the file with some odd characters and encodings. Getting a fresh MySQL dump and unzipping it properly worked for me.
Just wanted to add this here in case others find that increasing the max_allowed_packet variable was not helping.
None of the solutions regarding packet size or timeouts made any difference for me. I needed to disable ssl
mysql -u -p -hmyhost.com --disable-ssl db < file.sql
https://dev.mysql.com/doc/refman/5.7/en/encrypted-connections.html
Currently, when I visit localhost/phpmyadmin, I am seeing the following error:
ERROR: Token Mismatch (In tooltip)
Incorrect format parameter
I will explain the changes I did step by step:
I had xampp of version 1.7.1 installed.
To upgrade it to latest, I renamed Xampp folder in c:// to "xampp_1" and took the group database backup in .sql format.
From this link, I downloaded php_oauth-1.2.3-5.6-ts-vc11-x86.zip and copied the php_oauth.dll to c://xampp/php/ext/ and then in php.ini, I mentioned extension=php_oauth.dll.
After this, I ran Apache server and Mysql through Xampp.
then tried to import the sql backup file through CLI as follows:
mysql -u root < localhost.sql
I got some error in command prompt. (I will update this soon)
Then later when I visited localhost/phpmyadmin, I am seeing this page:
In my case this worked:
logout
clear url (remove all after ?, wspecially token=blablabla must be removed)
remove all cookies
refresh
login
This can't fix the problem basically as the same error may appear in any time
Find php.ini in the xampp
1- post_max_size: 128M (give a size for example 128)
2- upload_max_filesize : 64M (for example 64)
post_max_size must be larger than upload_max_filesize to fix the problem.
Reason: You are getting this error because size of your filename.sql is greater than maximum upload limit. (By default you can import upto Max:2,048KiB)
Solution:
Navigate to xampp\php\php.ini
Find upload_max_filesize and increase it to desired upload side (e.g. upload_max_filesize=128M) and save
Restart xampp
Adding solution as a answer text so that the question drops from the Unanswered Questions list. Original answer is provided by the question author in a reply/comment on his original question text:
I uninstalled both 1.7.1 and 5.6.3 and then re-installed 5.6.3. That
did the trick.
The problem is with the Post Maximum size, open the PHP.ini file and find the
post_max_size=8M and increase it up to post_max_size=128M,
1.PHP.ini ->increase the post_max_size parameter from 8M up to 128M,
that's it.
I found a perfect solution in the following tool:
BigDump: Staggered MySQL Dump Importer
which allowed me to change the connection charset to match that of the dumpfile. Works fine without any installs/re-installs.
set this database and ini file
SET GLOBAL max_allowed_packet=1073741824;
max_allowed_packet = 64M
then: use CLI (cmd)
goto ->xamp->mysql->bin
copy the path n set in Cmd
use below command to dumb db
mysql.exe -u root -p db_name< "C:\Users\path\file.sql"