So, I was trying to setup mysite.com/blog initially, but got pretty fed up with it, so i setup blog.mysite.com instead.
It successfully loads the index file: index.htm, but if i try to access a file info.php it fails saying: 502 bad gateway, i checked /var/log/nginx/error.log and it says:
2016/12/17 09:24:13 [error] 1042#0: *4 connect() failed (111:
Connection refused) while connecting to upstream, client: x.xx.xx.xx,
server: blog.mysite.com, request: "GET /info.php HTTP/1.1", upstream:
"fastcgi://127.0.0.1:9000", host: "blog.mysite.com"
I installed php via: sudo apt-get install php5-fpm php5-mysql from this tutorial: link
My nginx config in /etc/nginx/sites-enabled/myblog is:
server {
listen 80;
root /home/www/flask-deploy/myblog;
fastcgi_index index.php;
index index.html index.htm index.nginx-debian.html;
server_name blog.mysite.com www.blog.mysite.com;
location / {
try_files $uri $uri/ =404;
}
location ~ \.php$ {
try_files $uri =404;
fastcgi_split_path_info ^(.+\.php)(/.+)$;
#fastcgi_pass unix:/var/run/php-fpm.sock;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
include fastcgi_params;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
}
}
What am I doing wrong?
Thank you so much!
First of all, your nginx config has bad path to php-fpm.sock. (You error.log is right ;) )
1) Which PHP version are you using? Use:
php -v
2) Be sure php-fpm is installed it is very important for nginx
sudo apt-get install php-fpm
3) Set correct path to php-fpm
For example, I use PHP7.0 and my path is:
fastcgi_pass unix:/run/php/php7.0-fpm.sock;
Some my projects are running on PHP5.6 and path is:
fastcgi_pass 127.0.0.1:9000;
4) Restart nginx and php-fpm (php5.6-fpm, php7.0-fpm...)
sudo service nginx restart
sudo service php5.6-fpm restart
Related
I am running my php code in docker with Nginx and fastcgi
I am exposing port 9999 of my docker container
So to invoke my application I do:
http://localhost:9999/index.php
I also have a localdomain: example.com which is pointing to 127.0.0.1 in /etc/hosts.
So I can invoke my application using example.com:9999/index.php
Strange thing I noticed is, when I use localhost url, I am getting an error on my browser
Resource interpreted as Stylesheet but transferred with MIME type application/octet-stream: "http://localhost:9999/css/login.css?v=1".
I don't get the above error if I inovke it using example.com
Can somebody explain why is the strange behavior happening?
The nginx config is as follows:
events {
multi_accept on;
worker_connections 65535;
}
http {
# MIME
default_type application/octet-stream;
include /etc/nginx/mime.types;
# logging
access_log /var/log/nginx/access.log;
error_log /var/log/nginx/error.log warn;
server {
listen 80 default_server;
server_name _;
index index.php;
root /code/Public;
location / {
try_files $uri /index.php$is_args$args;
}
location ~ \.php {
try_files $uri =404;
fastcgi_split_path_info ^(.+\.php)(/.+)$;
include fastcgi_params;
fastcgi_param SCRIPT_FILENAME $realpath_root$fastcgi_script_name;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
fastcgi_index index.php;
fastcgi_pass 127.0.0.1:9000;
}
}
}
This is my Dockerfile config:
FROM phpdockerio/php73-fpm
RUN apt-get update
RUN apt-get install -y php7.3-memcache
RUN apt-get install -y php7.3-curl
RUN apt-get install -y nginx
ADD docker/nginx.conf /etc/nginx/
CMD ["sh", "-c", "service nginx restart ; /usr/sbin/php-fpm7.3 -O"]
FYI: I am using slim-framework. here is the reference doc for setting up nginx
I am trying to configure CentOS 7.3, Nginx and PHP 7.3, but I am getting:
502 Bad Gateway
nginx/1.10.3
This is site.com.conf:
server {
listen 80;
server_name server IP;
root /var/www/site.com/public;
index index.php index.html index.htm;
location ~ \.php$ {
try_files $uri =404;
fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $request_filename;
include fastcgi_params;
}
}
If I upload static HTML to the public directory, I can see it, but if I try to load PHP files, i see that error.
I have /var/run/php-fpm/php-fpm.sock.
The solution was to change listen.owner and listen.groups in /etc/php-fpm.d/www.conf to nginx:
listen.owner = nginx
listen.group = nginx
Then restart with service php-fpm restart.
You can check for errors with: systemctl status php-fpm.service.
I installed Nginx & PHP using this guide here:
Nginx install guide
yum install php php-mysql php-fpm
edited /etc/php-fpm.d/www.conf
listen = /var/run/php-fpm/php-fpm.sock
listen.owner = nobody
listen.group = nobody
listen.owner = nobody
listen.group = nobody
ran:
systemctl start php-fpm
/etc/nginx/conf.d/default.conf
server {
listen 80;
server_name <my servers IP here - removed>;
# note that these lines are originally from the "location /" block
root /usr/share/nginx/html;
index index.php index.html index.htm;
location / {
try_files $uri $uri/ =404;
}
error_page 404 /404.html;
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root /usr/share/nginx/html;
}
location ~ \.php$ {
try_files $uri =404;
fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}
}
I then tested
http://<my server ip>/phpinfo.php
and it worked!
I then installed pear
yum install php-pear
but now php files don't work, the browser tries to download them instead of running them.
I've tried:
rebooting the server
restarting nginx
restarting php-fpm
checking all the config files to make sure they as the same as above.
I'm completely stuck. I don't know what to check to get php work again. This is the first time I've installed Nginx. I've looked around on the net for answers and on here.
I'm running Centos 7
help :)
UPDATE:
I've tried a much more shortened config file:
server {
listen 80;
server_name <my servers IP here - removed>;
# note that these lines are originally from the "location /" block
root /usr/share/nginx/html;
index index.php index.html index.htm;
location ~ \.php$ {
fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;
fastcgi_index index.php;
include fastcgi_params;
}
}
but that didn't work either.
I also tried:
fastcgi_pass 127.0.0.1:9000;
instead of:
fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;
but that didn't work too.
UPDATE 2
i found out that if I go to:
http://my ip/phpinfo.php - it works!
but if I go to:
http://domainname/phpinfo.php - it tries to download the PHP file instead of running it.
How do I make php files run while using the domain name instead of the IP?
According your second update, you have problem with Listen directive. nginx listen only IP-address or Domain name that mentioned in Listen directive. Maximillian gives you right answer. It you put listen 80 in your configuration file, you'll solve your problem, but there would be wotk only one site, with this listen. If you would like to configure PHP on your domain you could configure listen yourdomain.com:80.
Have you tried to edit
/etc/nginx/sites-enabled/default ?
Then you need to edit it as follows.
server {
listen 80 default_server;
listen [::]:80 default_server ipv6only=on;
root /usr/share/nginx/html;
index index.php index.html index.htm;
location ~ \.php$ {
try_files $uri =404;
fastcgi_split_path_info ^(.+\.php)(/.+)$;
fastcgi_pass unix:/var/run/php-fpm.sock;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}
}
afterward, you have to restart php-fpm and nginx
service nginx restart && service php-fpm restart
Try with below config for location,
location ~ .php$ {
root html;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME /usr/share/nginx/html/$fastcgi_script_name;
include fastcgi_params;
}
And do clear cache beforehand.
For your 2nd update try below in server block,
listen 127.0.0.1:8000; #your ip with port
server_name example.com; #domain name
Recently I also need to setup linux and php environment, so I strictly follow your step to setup it.
I encounter this two issue when I setup the LEMP environment,
a. nginx issue, post and answer
b. php-fpm issue, post and answer
I don't encounter the issue you face, so I show the environment for you, you may compare with yours.
Centos Version
vi /etc/centos-release
CentOS Linux release 7.3.1611 (Core)
Mysql version
mysql -u root -p
//enter password
Server version: 5.5.52-MariaDB MariaDB Server
Php version
php -v
PHP 5.4.16 (cli) (built: Nov 6 2016 00:29:02)
Pear info
pear list // refer to this post
Installed packages, channel pear.php.net:
=========================================
Package Version State
Archive_Tar 1.3.11 stable
Console_Getopt 1.3.1 stable
PEAR 1.9.4 stable
Structures_Graph 1.0.4 stable
XML_Util 1.2.1 stable
Nginx config file
vi /etc/nginx/conf.d/default.conf
server {
listen 80;
server_name 192.168.236.129;
# note that these lines are originally from the "location /" block
root /usr/share/nginx/html;
index index.php index.html index.htm;
location / {
try_files $uri $uri/ =404;
}
error_page 404 /404.html;
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root /usr/share/nginx/html;
}
location ~ \.php$ {
try_files $uri =404;
fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
include fastcgi_params;
}
}
info.php vi /usr/share/nginx/html/info.php
<?php phpinfo(); ?>
I'm getting a 502 Bad Gateway error with PHP7 and nginx 1.9.9 installed on Ubuntu 14.04 when I try to access any .php files. .html files load as expected.
I've updated the default.conf to:
server {
listen 80 default_server;
root /usr/share/nginx/html;
index index.html index.htm index.php;
server_name localhost;
location / {
try_files $uri $uri/ /index.php$is_args$args;
}
location ~ \.php$ {
fastcgi_split_path_info ^(.+\.php)(/.+)$;
fastcgi_pass unix:/run/php/php7.0-fpm.sock;
fastcgi_index index.php;
include fastcgi_params;
}
}
I've updated php.ini with cgi.fix_pathinfo = 0 and then rebooted the server, and am still getting the 502 error with all .php files. I have checked to ensure php7.0-fpm.sock is installed and in the proper location.
This is the error I'm getting from the nginx log 2016/01/19 19:14:54 [error] 1466#1466: *1 open() "/usr/share/nginx/html/xmlrpc.php" failed (2: No such file or directory), client: 85.159.237.13, server: localhost, request: "POST /xmlrpc.php HTTP/1.0", host: "my.ip.address"
I've searched for the answer for quite a while and I'm out of ideas. Does anyone have any suggestions?
This is mostly because your nginx and php7.0-fpm were not run under the same user. Edit nginx.conf and change "user nginx" to "user www-data"
By the way, "client: 85.159.237.13", that was a script boy, I think.
I don't know why I got this error every time I tried to open the page:
2013/04/06 17:52:19 [error] 5040#0: *1 connect() failed (111: Connection refused) while connecting to upstream, client: 127.0.0.1, server: localhost, request: "GET /info.php HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "localhost:8080"
I resolved it, it was a configuration file issue, I added:
location ~ .php$ {
try_files $uri =404;
fastcgi_split_path_info ^(.+\.php)(/.+)$;
fastcgi_pass unix:/var/run/php5-fpm.sock;
fastcgi_index index.php;
include fastcgi_params;
}
For me the problem was my php-fpm service wasn't running. You can check it by running:
service php-fpm status
and start it by running
service php-fpm start
Sometimes php-fpm might have broken instances running, preventing a restart. This command is a clean way to clear them out and restart php-fpm
killall -9 php-fpm; service php-fpm restart
update your configurations as mentioned before:
location ~ .php$ {
try_files $uri =404;
fastcgi_split_path_info ^(.+\.php)(/.+)$;
fastcgi_pass unix:/var/run/php5-fpm.sock;
fastcgi_index index.php;
include fastcgi_params;
}
but don't forget to restart both nginx server and php-fpm after updating
sudo /etc/init.d/nginx restart
sudo /etc/init.d/php-fpm restart
I found I had this same issue with PHP7 running in Docker on a Debian Jessie (8.3) instance.
running command 'ps -aux' showed that php-fpm wasn't running
running 'php-fpm -D' brought it up as deamonized process.
Rerunning 'ps -aux' showed that php-fpm was indeed running
Refreshing my test page showed me the servers PHP info.
Added 'php-fpm -D' to my start.sh script so that things started every time the container is loaded.
Hope this helps someone.
Use fastcgi_pass unix:/var/run/php5-fpm.sock; only nginx and php install same server. If nginx and php install in other server you must use fastcgi_pass ip server:port;