My first question post here, although I'm a long time user. My PHP skills aren't advanced. I'm using PHP7 BTW.
I've found similar questions to this one, but not with the tier element, and so none of the answers I've tried so far have worked. It's probably obvious to a more experienced PHP programmer.
I've got some data in the json format, and decoded it into the following array:
Array (
[soc] => 3421
[series] => Array (
[0] => Array ( [year] => 2013 [estpay] => 620 )
[1] => Array ( [year] => 2015 [estpay] => 580 )
)
)
The data source varies, and so some times there are more years data available and sometimes less. It will also change over time as new data is added.
I want to sort the array so that the most recent year is always first. As I mentioned earlier, I've tried a few of the solutions that have been posted on here for multidimensional arrays, but the data I'm using has the multidimensional array in a lower tier of the array, and so I haven't been able to work out how to change the example code for multidimensional arrays to work around this.
As I mentioned, I'm no PHP expert, so please make no assumptions on my skill level in any replies. Thanks for your help!
Assuming you're using PHP7, and as you said you want to order by year descending, then for each array that you want to sort, try the below:
usort($array, function ($a, $b) {
return $b['year'] <=> $a['year'];
});
Related
I want to check, if array A contains all the items from array B (may contain others, but must contain all), when both arrays are multidimensional, i.e. can contains different variable types.
I've seen a lot (particularly this, this, this, this, this and this, also this, this and this as well). I've read PHP doc. Everything, that I checked, fails with "Array to string conversion" notice. Especially wen using array_intersect() or array_diff().
I'm using strict error checking, so notices actually holds further execution of entire script and are something, I don't generally like and want to avoid. Is it possible in this case?
My array A is:
Array
(
[0] => content/manage/index
[Content] => Array
(
[title] =>
[type] => 5
[category] =>
[recommended] =>
[featured] =>
[status] =>
[views] =>
[last_access_date] =>
[creation_date] =>
[modification_date] =>
[availability_date] =>
[author_id] =>
)
)
My array B is:
Array
(
[0] => /content/manage/index
[Content] => Array
(
[type] => 1
)
)
So, is there any way I can if I can use array_intersect on multidimensional arrays containing different variable types without getting notice?
My problem (and question) came out of misunderstanding, what "Array to string conversion" notice really means. In my case, it was trying to tell me, that I'm trying to walk multidimensional array with functions designed to be used on single dimension array.
Understanding that led me to a solution within few seconds. There are many of them here, on SO, but the one given by deceze here looked the best for me. So I adopted it into the form of such function:
function recursiveArrayIntersect($array1, $array2)
{
$array1 = array_intersect_key($array1, $array2);
foreach($array1 as $key=>&$value)
{
if(is_array($value)) $value = recursiveArrayIntersect($value, $array2[$key]);
}
return $array1;
}
I adopted it to my project and my way of coding, but all the credits still goes to deceze (his answer here)!
Now I can find an intersection of virtually any array, no matter what kind of variable types it contain and no matter of, how deep it is (how many subarrays it contains).
I am trying to convert indexed array to normal array. Basically what get is:
Array ( [0] => 14 [1] => 19 [2] => 20 )
And I need is:
Array(14,19,20);
I tried over Google but not information found. I think this kind of function isn't available in PHP, is there any? please let me know!
Thanks,
Asif
You're chasing shadows:
Both of the arrays you've shown are equal.
There is no such thing as an unindexed array in PHP.
But if you really want to be sure, use $newArray = array_values($array)
This question already has answers here:
How to search by key=>value in a multidimensional array in PHP
(17 answers)
Closed 9 years ago.
What's the most efficient way to search an array element's sub arrays to check the value of a specific key? For example, given the following array, where I want to check both subarrays "msg" value, and if either is populated, return a boolean result:
[TGMN02] => Array
(
[2] => Array
(
[id] => 93143
[msg] =>
)
[3] => Array
(
[id] => 24876
[msg] =>
)
)
What I have at the moment is simply looping through and checking, which feels quite clunky.
I don't know about "most" efficient but this won't necessarily have to iterate through the whole array as it breaks the loop on the first value found, so technically more efficient.
function hasMsg($a){
foreach($a as $b)
if(!empty($b['msg'])) return true;
return false;
}
Okay... since some meager comments weren't accompanied by alternative suggestions - you could try using some PHP>5.3 - I really can't see how it would be any more efficient though - it must still loop through the array at some level (but I'm not 100% sure on the inner workings of the PHP interpreter - perhaps there is some internal magic that could speed things up), so this is probably purely aesthetic:
$hasMsg = !!(count(array_filter($a,function($b){ return !empty($b['msg']); })));
... if anything less efficient. There's nothing wrong with "looping" through an array - it's a tried and tested language construct that's been around since the dawn of digital time (almost).
First write some custom func and then try to use it with array_walk_recursive(array &$input , callable $funcname [, mixed $userdata = NULL ]) function. Php manual.
I have a very strange array sorting related problem in PHP that is driving me completely crazy. I have googled for hours, and still NOTHING indicates that other people have this problem, or that this should happen to begin with, so a solution to this mystery would be GREATLY appreciated!
To describe the problem/question in as few words as possible: When sorting an array based on values inside a multiple levels deeply nested array, using a foreach loop, the resulting array sort order reverts as soon as execution leaves the loop, even though it works fine inside the loop. Why is this, and how do I work around it?
Here is sample code for my problem, which should hopefully be a little more clear than the sentence above:
$top_level_array = array('key_1' => array('sub_array' => array('sub_sub_array_1' => array(1),
'sub_sub_array_2' => array(3),
'sub_sub_array_3' => array(2)
)
)
);
function mycmp($arr_1, $arr_2)
{
if ($arr_1[0] == $arr_2[0])
{
return 0;
}
return ($arr_1[0] < $arr_2[0]) ? -1 : 1;
}
foreach($top_level_array as $current_top_level_member)
{
//This loop will only have one iteration, but never mind that...
print("Inside loop before sort operation:\n\n");
print_r($current_top_level_member['sub_array']);
uasort($current_top_level_member['sub_array'], 'mycmp');
print("\nInside loop after sort operation:\n\n");
print_r($current_top_level_member['sub_array']);
}
print("\nOutside of loop (i.e. after all sort operations finished):\n\n");
print_r($top_level_array);
The output of this is as follows:
Inside loop before sort operation:
Array
(
[sub_sub_array_1] => Array
(
[0] => 1
)
[sub_sub_array_2] => Array
(
[0] => 3
)
[sub_sub_array_3] => Array
(
[0] => 2
)
)
Inside loop after sort operation:
Array
(
[sub_sub_array_1] => Array
(
[0] => 1
)
[sub_sub_array_3] => Array
(
[0] => 2
)
[sub_sub_array_2] => Array
(
[0] => 3
)
)
Outside of loop (i.e. after all sort operations finished):
Array
(
[key_1] => Array
(
[sub_array] => Array
(
[sub_sub_array_1] => Array
(
[0] => 1
)
[sub_sub_array_2] => Array
(
[0] => 3
)
[sub_sub_array_3] => Array
(
[0] => 2
)
)
)
)
As you can see, the sort order is "wrong" (i.e. not ordered by the desired value in the innermost array) before the sort operation inside the loop (as expected), then is becomes "correct" after the sort operation inside the loop (as expected).
So far so good.
But THEN, once we're outside the loop again, all of a sudden the order has reverted to its original state, as if the sort loop didn't execute at all?!?
How come this happens, and how will I ever be able to sort this array in the desired way then?
I was under the impression that neither foreach loops nor the uasort() function operated on separate instances of the items in question (but rather on references, i.e. in place), but the result above seems to indicate otherwise? And if so, how will I ever be able to perform the desired sort operation?
(and WHY doesn't anyone else than me on the entire internet seem to have this problem?)
PS.
Never mind the reason behind the design of the strange array to be sorted in this example, it is of course only a simplified PoC of a real problem in much more complex code.
Your problem is a misunderstanding of how PHP provides your "value" in the foreach construct.
foreach($top_level_array as $current_top_level_member)
The variable $current_top_level_member is a copy of the value in the array, not a reference to inside the $top_level_array. Therefore all your work happens on the copy and is discarded after the loop completes. (Actually it is in the $current_top_level_member variable, but $top_level_array never sees the changes.)
You want a reference instead:
foreach($top_level_array as $key => $value)
{
$current_top_level_member =& $top_level_array[$key];
EDIT:
You can also use the foreach by reference notation (hat tip to air4x) to avoid the extra assignment. Note that if you are working with an array of Objects, they are already passed by reference.
foreach($top_level_array as &$current_top_level_member)
To answer you question as to why PHP defaults to a copy instead of a reference, it's simply because of the rules of the language. Scalar values and arrays are assigned by value, unless the & prefix is used, and objects are always assigned by reference (as of PHP 5). And that is likely due to a general consensus that it's generally better to work with copies of everything expect objects. BUT--it is not slow like you might expect. PHP uses a lazy copy called copy on write, where it is really a read-only reference. On the first write, the copy is made.
PHP uses a lazy-copy mechanism (also called copy-on-write) that does
not actually create a copy of a variable until it is modified.
Source: http://www.thedeveloperday.com/php-lazy-copy/
You can add & before $current_top_level_member and use it as reference to the variable in the original array. Then you would be making changes to the original array.
foreach ($top_level_array as &$current_top_level_member) {
I'm using cakephp and am getting back a "double array" where it is giving me 2 arrays where it should be 1, I have looked into the issue as far as cakephp and can't figure it out and just want to move past this for now so I am wondering if anyone knows how to unset a second array if a variable has 2 arrays.. below is the print_r of the array, its just one variable that has this, which I find odd.. so I want to make it so there is not a 2nd set of duplicate values, if I do an array_push it pushes both values for that index into the resulting new array index so that won't work
one variable is equal to the following:
Array ( [0] => 42 [1] => 62 ) Array ( [0] => 42 [1] => 62 )
EDIT:
This is not an issue of my printing out the array twice accidentally, as I said above, with a foreach array_push of the variable, i end up with this, which is odd:
Array ( [0] => 4242 [1] => 6262 )
EDIT:
This is the cakephp database call that I am using, I know I didn't ask this in regards to cakephp but since some people think this is impossible i am posting this just so you can see what it does if you want
$specificfields_array = $this->Mymodel->find('list', array('fields' =>'Mymodel.id'),
'conditions' => array('emailgroup' => $categorynumber, 'sent' => '0');));
EDIT:
This is what a "foreach" array_push is:
$mynewarray = array();
foreach ($specificfields as $specificfields_current) {
array_push ($mynewarray, $specificfields_current);
}
A variable cannot "have two arrays". It can be one array that has two arrays nested. The scenario you describe is impossible (probably there are two print_r there or there is a < character hiding stuff – check the HTML source).
Can you post the controller, the model and the view file with your print_r calls to the http://bin.cakephp.org/ site and post the links back here so we can see all of your code?