<?php
if(isset($_POST["submit"]))
{
$adm=$_POST["admno"];
$phn=$_POST["phn1"];
include("model.php");
$db = new database;
$r=$db->register($adm);
while($row=mysql_fetch_array($r))
{
if($row["phn_no1"]==$phn || $row["phn_no2"]==$phn || $row["phn_no3"]==$phn)
{
$formatted = "".substr($phn,6,10)." ";
$password = $formatted + $adm;
echo $password;
$db->setpassword($adm,$password);
$pre = 'PREFIX';
$suf = '%20ThankYou';
$sms = $pre.$password.$suf;
session_start();
$ch = curl_init("http://www.perfectbulksms.in/Sendsmsapi.aspx? USERID=ID&PASSWORD=PASS&SENDERID=SID&TO=$phn&MESSAGE=$sms");
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_AUTOREFERER, true);
$result = curl_exec($ch);
curl_close($ch);
header("Location:password.php?msg=new");
}
else
{
header("Location:register.php?msg=invalid");
}
}
}
?>
this code is working perfect on my local host .. but when i put it on server ... it takes lots of time but the code in curl command is not working it only refers to next page ... i checked that curl is enabled .. if i use only sms api without curl command it sends sms immidiately.... but i want to run both header and also want to hide my sms api.... is there any alternate of this ???
Related
I have spent a couple of hours reading up on this but as so yet I find no clear solutions....I am using WAMP to run as my Local server. I have a successful API call set up to return data.
I would like to store that data locally, thus reducing the number of API call being made.
For simplicity I have created a cache.json file in the same folder as my PHP scripts and when I run the process I can see the file has been accessed as the time stamp updates.
But the file remains empty.
Based on research I suspect the issue may come down to a permission issue; I have gone through the folders and files and unchecked read only etc.
Appreciate if someone could validate that my code is correct and if it is hopefully point me in the the direction of a solution.
many thanks
<?php
$url = 'https://restcountries.eu/rest/v2/name/'. $_REQUEST['country'];
$cache = __DIR__."/cache.json"; // make this file in same dir
$force_refresh = true; // dev
$refresh = 60; // once an min (set short time frame for testing)
// cache json results so to not over-query (api restrictions)
if ($force_refresh || ((time() - filectime($cache)) > ($refresh) || 0 == filesize($cache))) {
$ch = curl_init();
curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_URL,$url);
$result=curl_exec($ch);
curl_close($ch);
$decode = json_decode($result,true);
$handle = fopen($cache, 'w');// or die('no fopen');
$json_cache = $decode;
fwrite($handle, $json_cache);
fclose($handle);
}
} else {
$json_cache = file_get_contents($cache); //locally
}
echo json_encode($json_cache, JSON_UNESCAPED_UNICODE);
?>
I managed to solve this by using file_put_contents(), not being an expert I do not understand why this works and the code above doesn't, but maybe this helps someone else.
adjusted code:
<?php
$url = 'https://restcountries.eu/rest/v2/name/'. $_REQUEST['country'];
$cache = __DIR__."/cache.json"; // make this file in same dir
$force_refresh = false; // dev
$refresh = 60; // once an min (short time frame for testing)
// cache json results so to not over-query (api restrictions)
if ($force_refresh || ((time() - filectime($cache)) > ($refresh) || 0 == filesize($cache))) {
$ch = curl_init();
curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_URL,$url);
$result=curl_exec($ch);
curl_close($ch);
$decode = json_decode($result,true);
$handle = fopen($cache, 'w');// or die('no fopen');
$json_cache = $result;
file_put_contents($cache, $json_cache);
} else {
$json_cache = file_get_contents($cache); //locally
$decode = json_decode($json_cache,true);
}
echo json_encode($decode, JSON_UNESCAPED_UNICODE);
?>
Recently tasked to monitor external webpage response/loading time via CACTI. I found some PHP scripts that were working (pageload-agent.php and class.pageload.php) using cURL. All was working fine until they requested it to be transferred from LINUX to Windows 2012R2 server. I'm having a very hard time modifying the scripts to work for windows. Already installed PHP and cURL and both working as tested. Here are the scripts taken from askaboutphp.
class.pageload.php
<?php
class PageLoad {
var $siteURL = "";
var $pageInfo = "";
/*
* sets the URLs to check for loadtime into an array $siteURLs
*/
function setURL($url) {
if (!empty($url)) {
$this->siteURL = $url;
return true;
}
return false;
}
/*
* extract the header information of the url
*/
function doPageLoad() {
$u = $this->siteURL;
if(function_exists('curl_init') && !empty($u)) {
$ch = curl_init($u);
curl_setopt($ch, CURLOPT_HEADER, true);
curl_setopt($ch, CURLOPT_ENCODING, "gzip");
curl_setopt($ch, CURLOPT_FOLLOWLOCATION, true);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_NOBODY, false);
curl_setopt($ch, CURLOPT_FRESH_CONNECT, false);
curl_setopt($ch, CURLOPT_USERAGENT, "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1)");
$pageBody = curl_exec($ch);
$this->pageInfo = curl_getinfo($ch);
curl_close ($ch);
return true;
}
return false;
}
/*
* compile the page load statistics only
*/
function getPageLoadStats() {
$info = $this->pageInfo;
//stats from info
$s['dest_url'] = $info['url'];
$s['content_type'] = $info['content_type'];
$s['http_code'] = $info['http_code'];
$s['total_time'] = $info['total_time'];
$s['size_download'] = $info['size_download'];
$s['speed_download'] = $info['speed_download'];
$s['redirect_count'] = $info['redirect_count'];
$s['namelookup_time'] = $info['namelookup_time'];
$s['connect_time'] = $info['connect_time'];
$s['pretransfer_time'] = $info['pretransfer_time'];
$s['starttransfer_time'] = $info['starttransfer_time'];
return $s;
}
}
?>
pageload-agent.php
#! /usr/bin/php -q
<?php
//include the class
include_once 'class.pageload.php';
// read in an argument - must make sure there's an argument to use
if ($argc==2) {
//read in the arg.
$url_argv = $argv[1];
if (!eregi('^http://', $url_argv)) {
$url_argv = "http://$url_argv";
}
// check that the arg is not empty
if ($url_argv!="") {
//initiate the results array
$results = array();
//initiate the class
$lt = new PageLoad();
//set the page to check the loadtime
$lt->setURL($url_argv);
//load the page
if ($lt->doPageLoad()) {
//load the page stats into the results array
$results = $lt->getPageLoadStats();
} else {
//do nothing
print "";
}
//print out the results
if (is_array($results)) {
//expecting only one record as we only passed in 1 page.
$output = $results;
print "dns:".$output['namelookup_time'];
print " con:".$output['connect_time'];
print " pre:".$output['pretransfer_time'];
print " str:".$output['starttransfer_time'];
print " ttl:".$output['total_time'];
print " sze:".$output['size_download'];
print " spd:".$output['speed_download'];
} else {
//do nothing
print "";
}
}
} else {
//do nothing
print "";
}
?>
Thank you. any type of assistance is greatly appreciated.
I have two php file: 1- get.php 2- send.php. Consider the user clicks on the buy button and requests to connect in the payment gateway page. the send.php for the user is as follows:
<?php
session_start();
if(isset($_SESSION['login_user'])) {
$username = $_SESSION['login_user'];
function send($url,$api,$amount,$redirect){
$ch = curl_init();
curl_setopt($ch,CURLOPT_URL,$url);
curl_setopt($ch,CURLOPT_POSTFIELDS,"api=$api&amount=$amount&redirect=$redirect");
curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, FALSE);
curl_setopt($ch,CURLOPT_RETURNTRANSFER,true);
$res = curl_exec($ch);
curl_close($ch);
return $res;
}
$url = 'http://payment.com/payment-test/gateway-send';
$api = 'adxcv-zzadq-polkjsad-opp13opoz-1sdf455aadzmck1244567';
$amount = 1000;
$redirect = urlencode('http://localhost/get.php');
$result = send($url,$api,$amount,$redirect);
if($result > 0 && is_numeric($result)){
$go = "http://payment.com/payment-test/gateway-$result";
//save the username and the get_id in a table.
header("Location: $go");
}}
esle {echo "found an error in connecting to payment gateway";} ?>
Now, the user goes to the payment gateway page and he does operation payment successfully. Now the payment gateway page from the bank sends trans_id and id_get to the get.php file and the get.php file is as follows:
function get($url,$api,$trans_id,$id_get){
$ch = curl_init();
curl_setopt($ch,CURLOPT_URL,$url);
curl_setopt($ch,CURLOPT_POSTFIELDS,"api=$api&id_get=$id_get&trans_id=$trans_id");
curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, FALSE);
curl_setopt($ch,CURLOPT_RETURNTRANSFER,true);
$res = curl_exec($ch);
curl_close($ch);
return $res;
}
$url = 'http://payment.com/payment-test/gateway-result-second';
$api = 'adxcv-zzadq-polkjsad-opp13opoz-1sdf455aadzmck1244567';
$trans_id = $_POST['trans_id'];
$id_get = $_POST['id_get'];
$result = get($url,$api,$trans_id,$id_get);
if($result == '1') {
//find the `$id_get`value in the table and put the `trans_id` within the same raw that the id_get is
echo "successfully"; }
else {echo "Unsuccessfully";}
The problem in the get.phpis the echo does not know that sends the messages to which user.And If I use the session in the top of the get.phpfile, as the result the session_start() gets a session from the payment gateway website.
I just have installed logstash, configured its config file with input, filter and output and finally have run it. Is it possible to test if logstash pushes log data by writing some PHP script? Can someone provide me some php script that can catch log data, sending from logstash?
Run the following to get the list of logs in your elasticsearch index :
$date = date("Y.m.d");
$host = "127.0.0.1";
$port = "9200";
$index = "logstash-".$date;
$type = "*";
$log = array();
$query = '{"query":{"match_all":{}}}';
$curl = curl_init();
if ($curl) {
curl_setopt($curl,CURLOPT_URL, $host."/".$index."/".$type."/_search");
curl_setopt($curl, CURLOPT_PORT, $port);
curl_setopt($curl, CURLOPT_CUSTOMREQUEST, "POST");
curl_setopt($curl, CURLOPT_POSTFIELDS, $query);
curl_setopt($curl, CURLOPT_RETURNTRANSFER, 1);
$result = curl_exec($curl);
if (curl_errno($curl)) {
echo curl_error($curl); //error
}
curl_close($curl);
if (!$result) {
//error
}
$arr=(json_decode($result, true));
$logs = $arr['hits']['hits'];
// If any logs were found
if (count($logs)>0) {
foreach ($logs as $q) {
// load the data in the $data array
$log[] = $q["_source"];
echo "<pre>";
print_r($log);
echo "</pre>";
}
}
}
?>
Cheers.
Do you have use Elasticsearch to store the log data? After you have store the logs in elasticsearch, you can use restful api to get the logs by php.
You must install Elasticsearch PHP client to communicate with elasticsearch server.
I am trying to create a php gotomeating api implementation. I successfully got the access_token but for any other requests I get error responses. This is my code:
<?php
session_start();
$key = '#';
$secret = '#';
$domain = $_SERVER['HTTP_HOST'];
$base = "/oauth/index.php";
$base_url = urlencode("http://$domain$base");
$OAuth_url = "https://api.citrixonline.com/oauth/authorize?client_id=$key&redirect_uri=$base_url";
$OAuth_exchange_keys_url = "http://api.citrixonline.com/oauth/access_token?grant_type=authorization_code&code={responseKey}&client_id=$key";
if($_SESSION['access_token']) CreateForm();else
if($_GET['send']) OAuth_Authentication($OAuth_url);
elseif($_GET['code']) OAuth_Exchanging_Response_Key($_GET['code'],$OAuth_exchange_keys_url);
function OAuth_Authentication ($url){
$_SESSION['access_token'] = false;
header("Location: $url");
}
function CreateForm(){
$data = getURL('https://api.citrixonline.com/G2M/rest/meetings?oauth_token='.$_SESSION['access_token'],false);
}
function OAuth_Exchanging_Response_Key($code,$url){
if($_SESSION['access_token']){
CreateForm();
return true;
}
$data = getURL(str_replace('{responseKey}',$code,$url));
if(IsJsonString($data)){
$data = json_decode($data);
$_SESSION['access_token'] = $data->access_token;
CreateForm();
}else{
echo 'error';
}
}
/*
* Helper functions
*/
/*
* checks if a string is json
*/
function IsJsonString($str){
try{
$jObject = json_decode($str);
}catch(Exception $e){
return false;
}
return (is_object($jObject)) ? true : false;
}
/*
* CURL function to get url
*/
function getURL($url,$auth_token = false,$data=false){
// Initialize session and set URL.
$ch = curl_init();
curl_setopt($ch, CURLOPT_URL, $url);
// Set so curl_exec returns the result instead of outputting it.
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false);
if($auth_token){
curl_setopt($curl, CURLOPT_HTTPHEADER, array('Authorization: OAuth oauth_token='.$auth_token));
}
if($data){
curl_setopt($ch, CURLOPT_POST,true);
$d = json_encode('{ "subject":"test", "starttime":"2011-12-01T09:00:00Z", "endtime":"2011-12-01T10:00:00Z", "passwordrequired":false, "conferencecallinfo":"test", "timezonekey":"", "meetingtype":"Scheduled" }');
echo implode('&', array_map('urlify',array_keys($data),$data));
echo ';';
curl_setopt($ch, CURLOPT_POSTFIELDS,
implode('&', array_map('urlify',array_keys($data),$data))
);
}
// Get the response and close the channel.
$response = curl_exec($ch);
/*
* if redirect, redirect
*/
$code = curl_getinfo($ch, CURLINFO_HTTP_CODE);
if ($code == 301 || $code == 302) {
preg_match('/<a href="(.*?)">/', $response, $matches);
$newurl = str_replace('&','&',trim(array_pop($matches)));
$response = getURL($newurl);
} else {
$code = 0;
}
curl_close($ch);
return $response;
}
function urlify($key, $val) {
return urlencode($key).'='.urlencode($val);
}
to start the connect process you need to make a request to the php file fith send=1. I tryed diffrent atempts to get the list of meetings but could not get a good response.
Did anybody had prev problems with this or know of a solution for this?
Edit:
This is not a curl error, the server responds with error messages, in the forums from citrix they say it should work, no further details on why it dosen't work, if I have a problem with the way I implemented the oauth or the request code. The most comon error I get is: "error code:31305" that is not documented on the forum.
[I also posted this on the Citrix Developer Forums, but for completeness will mention it here as well.]
We are still finalizing the documentation for these interfaces and some parameters which are written as optional are actually required.
Compared to your example above, changes needed are:
set timezonekey to 67 (Pacific time)
set passwordrequired to false
set conferencecallinfo to Hybrid (meaning: both PSTN and VOIP will be provided)
Taking those changes into account, your sample data would look more like the following:
{"subject":"test meeting", "starttime":"2012-02-01T08:00:00",
"endtime":"2012-02-01T09:00:00", "timezonekey":"67",
"meetingtype":"Scheduled", "passwordrequired":"false",
"conferencecallinfo":"Hybrid"}
You can also check out a working PHP sample app I created: http://pastebin.com/zE77qzAz