I am running Ubuntu 16. I am fairly new to web design but I have set up a LAMP server on my Ubuntu machine and installed WordPress site. I wanted to try to mess around with PHP so I tried to install myphp.
I managed to do this and I realized that I had to install nginx also.
I did this, but my local host always diverts to a message "welcome to Nginx"
I tried to edit the configuration files but could not get it to work?
Is there a guide for installing Nginx and myphp to see phpMyAdmin, after you have already set up a WordPress site?
Like I said I am running Ubuntu 16.04.
You may need to delete the index.html file from the web root. The index.php file should remain.
On Ubuntu+nginx go to html directory using following command
cd /var/www/html/
then find out following index.nginx-debian.html and delete it or edit it as you want
To edit these file open into you editor or use Ubuntu default editor nano.
sudo nano /var/www/html/index.nginx-debian.html
To delete these file run following command.
sudo rm -rf /var/www/html/index.nginx-debian.html
these is the defautl nginx welcome page that why it appear after install, for more information check nginx default configuration file using following command.
sudo nano /etc/nginx/sites-available/default
Thanks
Related
I'm trying to uses Vagrant and VirtualBox to enhance the develop environment on my laptop. So I download the box of CentOS7.1 and installed PHP 7.0.1,apache 2.4.18,mysql 5.6.28. My friend reminded me to add intl extension for using CakePHP3.1.6.
While I finished all the install and configure things I add an test html file to the virtual machine. Then I access the virtual machine with 192.168.33.10 which is wrote in Vagrantfile. The html works perfectly fine. I put the CakePHP3.1.6 on the virtual machine but I cannot access properly.The page show me
dispatch( Request::createFromGlobals(), new Response() );
and nothing more. I don't know which I missed. Please help.
Check for php5.conf and php5.load symbolic links on /etc/apache2/mods-enabled, you can create them by using the following commands
cd /etc/apache2/mods-enabled
ln -s ../mods-available/php5.conf
ln -s ../mods-available/php5.load
I have installed macports and updated my path:
via docs:
http://guide.macports.org/#installing.shell.postflight
but now if I test any of the sites in my Sites folder, I get a 404.
so for instance if I go to localhost/~carey/test.php which is just a php_info, I get a 404
If I go to:
localhost/
I get the It Works! page
Am I missing a step to configure Macports to run apache from my Sites directory?
If I run $env from the command line I get:
TERM_PROGRAM=Apple_Terminal
SHELL=/bin/bash
TERM=xterm-256color
TMPDIR=/var/folders/rs/943jh19j31j3ld55yxqgf2mm0000gn/T/
Apple_PubSub_Socket_Render=/tmp/launch-NehzDd/Render
TERM_PROGRAM_VERSION=326
TERM_SESSION_ID=A329EAC2-AE9F-4460-BB1B-B35981BAE0ED
USER=carey
SSH_AUTH_SOCK=/tmp/launch-CgUaVv/Listeners
__CF_USER_TEXT_ENCODING=0x1F5:0:0
PATH=/opt/local/bin:/opt/local/sbin:/opt/local/bin:/opt/local/sbin:/opt/local/bin:/opt/local/sbin:/opt/local/bin:/opt/local/sbin:/opt/local/bin:/opt/local/sbin:/usr/local/mysql/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/git/bin
__CHECKFIX1436934=1
PWD=/Users/carey
LANG=en_US.UTF-8
SHLVL=1
HOME=/Users/carey
LOGNAME=carey
SECURITYSESSIONID=186b0
_=/usr/bin/env
and I can run any macport install, but I cannot configure the terminal to connect to my localhost in the browser.
So I think I have macports installed correctly, but I dont know how to make it run out of the /opt directory.
I also think this is relative to establishing the env variables, so apache knows to look to the /opt dir, but I don't know how to change it.
I am running Mavericks.
UPDATE
Following the docs recommended by eborisch here:
https://trac.macports.org/wiki/howto/MAMP
I have been able to setup the localhost directory, but still an issue.
Since I have multiple users on the machine, I had to comment out this line in httpd.conf:
Include conf/extra/httpd-userdir.conf
and added this to the httpd-userdir.conf file:
#
# Include user configurations
#
Include /private/etc/apache2/users/*.conf
which connects my Sites folder to the localhost.
I also needed to add this to the httpd.conf file to parse php files as php:
AddType application/x-httpd-php .php
Now, I have a file in my Sites dir called test.php, which has <?php phpinfo() ?>
and if I run localhost/~carey/test.php in the browser it works. phpinfo() returns that I am running php5.5.10 out of the /opt/ dir. So, all seems well. The problem is if I try to run any sites from folders in this directory. It just displays the directory tree, rather than treating it like a site.
For instance if I run,
localhost/~carey/mysite
it just returns:
Index of /~carey/mysite
Parent Directory
2005/
2006/
index.php
../
If I run
localhost/~carey/mysite/index.php
it runs that file correctly (ie looks correct in the browser)
Seems like an .htaccess issue, but not sure how I would resolve that globally for each folder in the Sites directory
any suggestions?
Probably better served on https://lists.macosforge.org/mailman/listinfo/macports-users/ the macports mailing list. But some basics:
Is the osx web server running? (Web sharing under the sharing control panel?) If so, turn it off, or configure the two to use different ports.
Is the macports apache2 installed? (sudo port install apache2)
Is it running? (sudo port load apache2)
Have you edited its configuration (/opt/local/apache2/conf/httpd.conf)?
See https://trac.macports.org/wiki/howto/MAMP for instructions on getting things up and running.
I was struggling with apache2 already installed in ubuntu so I decided to return back to lampp..I have unistalled apache 2 mysql server and phpmyadmin.
The problem is that when I type sudo which php
I get nothing...
So I cannot request e.g. sudo composer create-project laravel/laravel.....
since php is missing for root user..
Although when I type which php I get /opt/lampp/bin/php..
Is it possible to make the root user use the same path..?
You can do this:
Switch to root user
sudo su -
Edit the .bashrc
vi ~/.bashrc
And add a new path to the current one:
export PATH=$PATH:/opt/lampp/bin
This is my first time behind Ubuntu: I followed this tutorial to install Apache, PHP, SQL and phpMyAdmin. http://www.howtoforge.com/ubuntu_lamp_for_newbies
I got no errors and everything is working smooth. I then downloaded composer.phar and laravel I ran php composer.phar install and php composer.phar update. No errors here either I then changed apache config to have DirectoryROot at var/www/public.
And enabled rewrite mod: sudo a2enmod rewrite
Standard installation procedure however visiting localhost gives 0 php error messages only shows: Whoops, looks like something went wrong.
Apache error logs show nothing, access log only shows the 500 error. What am I missing I went over the entire procedure 3 times.
I solved the problem.
1) Open Terminal
2) Navigate to your laravel root folder CD var/www
3) Execute sudo chmod -R 777 *
This solved the problem but be careful with this. Make sure your permissions are properly set when you move from local to live.
I am newbie in PHP. I have successfully installed PHP on Ubuntu, now I want start my first program. I am using gPHPEdit as IDE.
Where should I save .php files that I create? And how to run/test them?
Make sure you have LAMP installed. Do a sudo tasksel and select lamp then hit enter, its gotta be the most simple *amp install ever made. Its a good idea to install phpmyadmin: sudo apt-get install phpmyadmin. After that just copy the files to /var/www/ and then they will show up on http://localhost. I recommended using Eclipse PDT or the Netbeans build for PHP.
You should pick up a book or start following some good tutorials on the web.
If you are just scripting using php, you can save them anywhere and run the php on the terminal using the php command line interpreter.
If you are trying write web scripts (and I think you are), you need to install and configure a web server (typically apache) and save your scripts in the server's document root (typically /var/www). Also, I highly recommend you to read up a little about servers and HTTP and figure out how all this works on the inside before learning to building websites in php.
If you cannot save or copy to var/www/html, to run your php scripts on your browser. If you are using Ubuntu 14.04.
I followed these steps and it worked for me.
Execute sudo su on the terminal.
Enter your password
Execute sudo subl /etc/apache2/sites-available/000-default.conf on your terminal to open this file. Note you can change the subl to any text editor to open the file e.g sudo nano /etc/apache2/sites-available/000-default.conf.
Change DocumentRoot /var/www/html to /home/user/yoursubdir
Save the file and close it.
Execute sudo subl /etc/apache2/apache2.conf on your terminal to open this file.
Add the following to end of the file
<Directory /home/user/>
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
Save and Close the file.
Execute sudo service apache2 restart
Go to your browser, type the URL of your script e.g 127.0.1.1/directory/document.php.
I hope this helps.
remove the index.html file from /var/www/
$ sudo rm index.html
create a new php file there:
$ sudo gedit /var/www/index.php
write in it:
<?php
print_r(phpinfo());
?>
Restart your Apache2 Server :
$ sudo service apache2 restart
OR
$ sudo /etc/init.d/apace2 restart
and point to yout localhost and /index.php
if err arises visit : http://www.allaboutlinux.eu/how-to-run-php-on-ubuntu/
https://www.php.net/manual/en/features.commandline.webserver.php
this is an easy way to test your files in php.
$ cd ~/public_html
$ php -S localhost:8000
then you can go to your browser and enter localhost:8000/myfile.php.