<?php
$busno=3;
$busname = 'Bus3';
$startdate='09/03/2017';
$enddate='09/11/2017';
$value1 = value_table::where('Start Date', $startdate)->get();
$value1 = value_table::where('End Date', $enddate)->get();
I want to check that the start date & end date should not conflict with any date in the table.
Is there any chance to check it with a single query?
$value1 = value_table::where('Start Date', $startdate)->where('End Date', $enddate)->get();
1) If you need to check if one pair of dates is not contained within another then do this:
$value = value_table::where('Start date',">=",$endDate) //starts after your end date
->orWhere('End date',"<=",$startDate) //Ends before the other start date
2) To check if a pair of dates is fully contained within another pair of dates do this:
$value = value_table::where('Start date',"<",$startDate)
->where('End date',">",$endDate);
3) To check if a pair of dates is partially contained within another pair then do this:
$value = value_table::where(function ($q) {
$q->where('Start date',"<",$startDate);
$q->where('End date',">", $startDate); //$startDate within
})->orWhere(function ($q) {
$q->where('Start date',"<",$endDate);
$q->where('End date',">", $endDate); //$endDate within
});
I think you should try this like:
$value1 = value_table::whereDate('Start Date', $startdate)
->whereDate('End Date', $enddate)
->get();
OR
$value1 = value_table::where('Start Date', $startdate)
->orWhere('End Date', $enddate)
->get();
Related
Consider:
$tglA = $request->tglA;
$tglB = $request->tglB;
$group = $request->group;
$barangId = $request->barangId;
$kodeMerk = $request->kodeMerk;
$interval = DateInterval::createFromDateString('1 day');
$tglTotal = new DatePeriod($tglA, $interval, $tglB);
if($group == 'true') {
if(empty($request->departemenId)) {
$scoreboard = HistoryPenjualan::select('kodeSales', 'departemenId', DB::raw('SUM(score) as totalScore'))
->whereBetween('tgl', [$tglA, $tglB])
->groupBy('departemenId')
->orderBy('totalScore', 'desc')
->get();
}
How can I sum the score value of the same date of whereBetween date range and then not show the duplicated date?
You can try to GROUP BY DATE(tgl):
$scoreboard = HistoryPenjualan::select('kodeSales', 'departemenId', DB::raw('SUM(score) as totalScore'))
->whereBetween('tgl', [$tglA, $tglB])
->groupBy('departemenId', DB::raw('DATE(tgl)'))
->orderBy('totalScore', 'desc')
->get();
I've got a query in my Laravel project that returns a collection of data from my database between two dates, it's then grouped by the hour (but I can change this to my liking), I'd now like to return the "dates" for data before they existed in the database as a way of building up a list of dates that I can display in my web page, eve though there will be no data for these days, my chart would look consistent.
As an example:
I want to see the past 30 days of data as a history, but the first 20 days of this period have no data yet, I still need to return the date keys for these days, except with just no data in them.
My current code is as follows (I'm using Carbon):
$uptimeData = UptimeChecks::where('user_id', 1)
->where('monitor_id', 1)
->where('checked_at', '>=', '2021-01-01 00:00:00')
->where('checked_at', '<=', '2021-01-30 23:59:59')
->orderBy('checked_at', 'asc')
->select('event', 'checked_at')
->get();
$from = Carbon::now()->subDays(60);
$period = CarbonPeriod::create($from, '2021-01-30 23:59:59');
$dates = $period->toArray();
foreach ($dates as $key => $date) {
$dates[$key] = Carbon::parse($date)->format('Y-m-d');
}
$uptimeData = collect($uptimeData);
$uptimeData = $uptimeData->merge($dates);
$uptimeDataTimeline = $uptimeData->groupBy(function ($item, $key) {
if (isset($item->checked_at)) {
$date = Carbon::parse($item->checked_at);
} else {
$date = Carbon::parse($item);
}
return $date->format('Y-m-d');
});
Even though there would be no entries to display a "checked_at" column, can this be spoofed with the date for that day with no data?
Update 03/05 # 20:30
I've updated my description to reflect the latest attempt to solve this problem, I appear to have constructed what I need, however, have some issues:
Where I'm looping over my $dates is there a way to build up some structure within each item so I don't have to do if/else checks on all my variables and keys?
For some reason, the "fake" dummy dates are being added after the real data, e.g: 1st Jan, 2nd Jan, 30th Dec ... how can I reverse this?
One way to achieve this is by creating a collection of the dates for the time period you want, and then merging the results of a query grouped by date into it.
Here's an example:
$from = '2021-01-01';
$to = '2021-01-31';
$period = CarbonPeriod::create($from, $to);
$dates = collect($period->toArray())->mapWithKeys(function ($date) {
return [$date->format('Y-m-d') => []];
});
// $dates = ['2021-01-01' => [], '2021-01-02' => [], ...etc]
$uptimeChecks = UptimeChecks::query()
->where('user_id', 1)
->where('monitor_id', 1)
->whereBetween('checked_at', [$from, $to])
->orderBy('checked_at', 'asc')
->select('event', 'checked_at')
->get();
$uptimeDates = $uptimeChecks->groupBy(function ($item, $key) {
return $item->checked_at->format('Y-m-d');
});
// $uptimeDates = ['2021-01-02' => ['event1', 'event2'], ...etc]
$uptimeData = $dates->merge($uptimeDates);
// $uptimeData = ['2021-01-01' => [], '2021-01-02' => ['event1', 'event2'], ...etc]
This assumes you are casting the checked_at field to a date in your UptimeChecks Model.
I have a query that is pulling my data from the table based on the created_at column. I am trying to fill in the missing months for the year. So for example, I have data for February, but thats it. How Do i fill in an amount of 0 for January then March-December?
My query to pull out based on the full month name is as follows
$servers = Stat::where('type','servers')->orderBy('created_at', 'asc')->whereYear('created_at', '=', date("Y"))
->select(DB::raw("SUM(amount) as total"))
->get()
->groupBy(function($val) {
return Carbon::parse($val->created_at)->format('F');
});
In this case, I get my February and the total amount. I'd like the rest of the amounts that don't exist to be 0, or fill in the correct info if it exists later in the year.
You are using sum() for the whole year, and using groupBy method on collection, so there is only one month.
You need to group by month like this:
$servers = Stat::where('type','servers')
->orderBy('created_at', 'asc')
->whereYear('created_at', '=', date("Y"))
->groupBy(DB::raw("MONTH(created_at)"))
->selectRaw("SUM(amount) as total, create_at")
->get()
->groupBy(function($val) {
return $val->created_at->format('F');
});
and you can use CarbonPeriod to create an initial month array, and then merge to the servers:
$all_month = array();
$period = \Carbon\CarbonPeriod::create('2020-01-01', '1 month', '2021-12-31');
foreach ($period as $p) {
$m = $p->format('F');
if (isset($servers[$m])) {
$all_month []= [$m => $servers[$m]->first()->total];
} else {
$all_month []= [$m => 0];
}
}
I am new to Laravel and not really sure how to do this.
I record dates in my database as start_day in my times table.
Date is persisted with the following format: 2019-10-03
Right now all I have is:
$months = DB::table('times')->where('start_day', '=', 2019)
How should I select data for each month of the year?
use whereYear
use Carbon\Carbon;
$months = DB::table('times')->whereYear('start_day', (string) Carbon::now()->year)->get();
If you want to select months only then
$months = DB::table('times')->select(DB::raw('MONTH(start_day) month')->whereYear('start_day', (string) Carbon::now()->year)->get();
You need to change the where() to whereYear() to search by year.
$months = DB::table('times')->whereYear('start_day', '=', 2019)
write
$month = array():
for($i=1;$i<=12;$i++){
$month[] = DB::table('times')->whereYear('start_day','2019')->whereMonth('start_day',$i)->get();
}
OR
$month = array():
for($i=1;$i<=12;$i++){
$month[] = DB::table('times')->where([['YEAR(start_day)', '=', 2019],['MONTH(start_day)','=',(int)$i]])->get();
}
you can try monthly , weekly , yearly in this format
$weeklyNumberOfSales = Sale::whereBetween('order_date', [Carbon::now()->startOfWeek(), Carbon::now()->endOfWeek()])
->sum('qty');
$monthlyNumberOfSales = Sale::whereMonth('order_date',Carbon::now()->format('m'))
->sum('qty');
$yearlyNumberOfSales = Sale::whereYear('order_date',Carbon::now()->format('Y'))
->sum('qty');
model name Sale .
'order_date' and 'qty' are the field name
I want to count data from exist table which the date is today. And everyday it counts automaticaly.
I have pembayaran table that include 'tanggal' column as date and 'total' column as number that i will count.
I've tried this code. But it always give me '0'. Did i forget something?
Controller
public function index(){
$today = date('Y-m-d');
$where = array('tanggal' => $today);
$getpem = $this->aruskas_m->selectX('pembayaran',$where)->result();
$jumlah =0;
foreach ($getpem as $row) {
$jumlah += $row->total;
}
$data['kasmasuk'] = $jumlah;
$this->load->view('laporan/aruskas_v', $data);
}
Change
$where = array('tanggal' => $today);
to
$where = array('date(tanggal)='. $today);
Please make sure your date field's format is exactly like this Y-m-d format. Otherwise you have to change the date format of $today perfectly matching with tanggal field in your condition $where = array('tanggal' => $today);