Hello i am learning Laravel and trying to modifying vhost file of my xampp server for laravel practice project, but its not working.
code of vhost file is
<VirtualHost *:80>
DocumentRoot "D:/xampp/htdocs/laravel5Prc/public"
ServerAdmin admin#localhost
ServerName laravel5.prc
ServerAlias laravel5.prc
<Directory "D:/xampp/htdocs/laravel5Prc/public">
AllowOverride All
Options Indexes FollowSymLinks
Require local
# if you want access from other pc's on your local network
#Require ip 192.168.1.121
# Only if you want the world to see your site
#Require all granted
</Directory>
</VirtualHost>
i have taken this code from this url
How to enable Virtual Host on Xampp for Laravel?
its not working form me, anyone please guide me what am i doing wrong in it ?
I'm strongly recommend you to use Laravel's vagrant box called Homestead instead of xampp, it's really amazing! You can read about it here. It's much more flexible and easier to understand than anything else.
I was using php-7.3.2 and had similar problem. This is not the solution to the problem, but an alternative. I went back to php-7.1.25 and ran again. I'm still going to check out what the problem is with version 7.3 and laravel, but maybe this will help some people who come here with the same problem.
This is what you should do, add or uncomment this below at the top of the xampp vhost file
NameVirtualHost *:80
Change this to you valid assumed domain and add the Directory index
ServerName laravel5.test
ServerAlias laravel5.test
DirectoryIndex index.php
And then go to the this folder C:\Windows\System32\drivers\etc\hosts in windows and add your domain of choice for example see this below
127.0.0.2 laravel5.test
127.0.0.3 anotherdomain.test
**** Please note don't use the localhost or 127.0.0.1 created by default to set yours's
you should create you own e.g. (127.0.0.2, 127.0.0.3, 127.0.0.4) in that order
After then restart you xampp server you should be good to go
**** I notice your Document and Directory has this "D:/xampp/htdocs/laravel5Prc/public"
change the D to C and please I would advise your laravel project should be outside the xampp folder, you can use the Document folder for this.
//Open C:\Windows\System32\drivers\etc\hosts
127.0.0.1 laravel5.prc
//Open xampp/apache/conf/extra/httpd-vhosts.conf
<VirtualHost *:80>
ServerAdmin webmaster#dummy-host2.example.com
DocumentRoot "C:/xampp/htdocs/laravel5Prc/public"
ServerName laravel5.prc
ErrorLog "logs/dummy-host2.example.com-error.log"
CustomLog "logs/d`enter code here`ummy-host2.example.com-access.log" common
</VirtualHost>
why you don't use
php artisan serve
to run laravel on localhost.
from https://laravel.com/docs/5.4/
Related
I am trying to create a new virtual host for one of my domains. I use XAMPP as my local test environment, and in the htdocs folder i have a folder with me website.
So i have this structure:
htdocs/mysite
I wanna be able to create a virtual host for mysite. So i have done the following:
httpd-hosts in apache
<VirtualHost *:80>
DocumentRoot "C:/xampp/htdocs/mySite"
ServerName mySite.test
ServerAlias *.mySite.test
</VirtualHost>
<VirtualHost *:443>
DocumentRoot "C:/xampp/htdocs/mySite"
ServerName mySite.test
ServerAlias *.mySite.test
SSLEngine on
SSLCertificateFile "crt/mySite.test/server.crt"
SSLCertificateKeyFile "crt/mySite.test/server.key"
</VirtualHost>
I also installed an SSL certificate, but that is not my issue.
Then i changed the:
host file
127.0.0.1 mySite.test
So i restart everything, and this happens:
i try to go to mySite.test => Does NOT work, cannot find it.
If i go to mySite.test.localhost => it works.
Maybe this is working as intended? However, the weird issue is then that i cannot access my "regular" localhost anymore. If i try to go to localhost/dashboard to get the default dashboard, it goes to mySite again?
So it is like what i have done have completely "replaced" the localhost somehow? Yet, i always have to include it in my url adress, i cannot just say mySite.test?
I am pretty new to do virtual hosts, so please let me know what i am missing here.
thanks all
i have an issue that i want to run my laravel project without cmd command php artisan serve , i want something like usually in php project localhost/projectName , when i do all the steps like changing hosts in System32/driver/etc/hosts
and changing E:\wamp\bin\apache\apache2.4.33\conf\extra\httpd-vhosts.conf with all recommended option i restart wamp but when i put on the url projectname.dev the cercle above browser still Spins and nothing displays in the browser!!!!
someone has any idea
the configurations is
<VirtualHost *:80>
ServerAdmin webmaster#ahssanstore.dev
DocumentRoot "E:\wamp\www\AhssanStore\public"
ServerName ahssanstore.dev
ServerAlias www.ahssanstore.dev
ErrorLog logs/ahssanstore.dev-error.log
CustomLog logs/ahssanstore.dev-access.log common
<Directory "E:\wamp\www\AhssanStore\public">
AllowOverride all
Require all granted
</Directory>
</VirtualHost>
and in C:\Windows\System32\drivers\etc
i add 127.0.0.1 ahssanstore.dev
and i restart wamp and after that i navigate to localhost/ahssanstore.dev
For windows, you can try use Laragon.
For those that have an Ubuntu Dev Server (with the possibility of other projects in your /var/www) I did the following to make it work.
Rename your-app/server.php to your-app/index.php
Copy .htaccess from your-app/public/ to your-app/
PS: If anyone knows that this creates some problems down the line please advice.
Done
Sometimes, servername: 'projectname.dev' doesn't work (I'm used to meet like this). Try changing 'projectname.me' instead 'project.dev'.
For VirtualHost configuration, you only need to set two lines:
<VirtualHost *:80>
DocumentRoot "E:\wamp\www\AhssanStore\public"
ServerName ahssanstore.dev
</VirtualHost>
Just Sharing my knowledge. Hope it also works!
I want to access my site via testing.dev instead of localhost:8000.
How can I achieve this?
<VirtualHost *:8000>
DocumentRoot "C:/Websites/test"
ServerName www.testing.dev
ServerAlias testing.dev
</VirtualHost>
I googled the problem, but they all speak of a httpd-vhost.conf file, but I don't seem to have one in my project.
Where / how can I find it? FYI, I'm using the built in webserver (bin/console server:run)
Tried this already
I found a httpd-vhost.conf in my xampp folder (don't use xampp tho)
Hello I'm trying to run project using newest symfony on my localhost.
What i already did:
I added this to my vhosts file in Xampp.
<VirtualHost *:80>
ServerAdmin webmaster#dummy-host.example.com
DocumentRoot "F:\Programy\XAMP\htdocs\Anka\web"
ServerName Anka
DirectoryIndex app_dev.php
ErrorLog "logs/vark.local-error.log"
CustomLog "logs/vark.local-access.log" common
</VirtualHost>
I added this in my hosts file in Windows\System32...
127.0.0.1 Anka
This is what i see after typing
anka\
In my browser.
My localhost website
And when i click on web i see this:
web
Can somebody help me what else i should do to see normal Symfony index page?
Try http://anka/app_dev.php or http://anka/web/app_dev.php
Also You can Change the directory to this one with the application and run:
php bin/console server:run
Then access http://localhost:8000/ in your browser
Like this:
https://symfony.com/doc/current/setup.html#running-the-symfony-application
First of all - ServerName value is case-sensitive, to Apache is not really recognizing request as this VirtualHost and you're getting listing of root directory.
Use http://Anka url, or change ServerName Anka to ServerName anka and 127.0.0.1 Anka into 127.0.0.1 anka.
Next thing is that you have some errors in your code and PHP cannot find AnkaBundle\AnkaBundle class. You're probably missing an autoloader, but that's only my guess. Not enough information to be sure.
Do I need to update my host file and apache httpd.conf files manually whenever I create a new zf project using command.
For ex: if my new project is zendi.
in host file:
127.0.0.1 localhost zendi
in httpd.conf:
NameVirtualHost 127.0.0.1
<VirtualHost 127.0.0.1>
DocumentRoot "C:\wamp\www"
ServerName localhost
</VirtualHost>
<VirtualHost 127.0.0.1>
DocumentRoot "C:\wamp\www\zendi\public"
ServerName zendi
ErrorLog "C:\wamp\logs\apache_error.log"
<Directory "C:\wamp\www\zendi\public" >
Options Indexes FollowSymLinks
AllowOverride all
Order deny,allow
Allow from all
</Directory>
</VirtualHost>
If you are using PHP 5.4, then you can use the built-in web server, and you don't even need Apache.
http://php.net/manual/en/features.commandline.webserver.php
If you need to use virtual host for your newly created zf application then the answer is YES you need to configure it manually command line project creation doesn't configure it for you. But if you don't need to have virtual server for every application you create then you can skip the process and go with direct url:
localhost/zendi/public
(But it is often considered good practice to have virtual hosts configured for the projects that you'll be working for a while)