I am trying to convert pdf to html in php using mgufrone library(https://github.com/mgufrone/pdf-to-html). I run this in my mac it's working alright.
But when I run in centos server, the .html file is created blank inside /vendor/gufy/pdftohtml-pdf/output folder.
In my mac local multiples files are created inside /output folder. But in server only a single file is created with empty content.
Please help.
Herein lies the problem:
sudo yum install poppler-utils
That installs an old version (0.12.4) which does not have pdftohtml command options like "-s" and "-fmt".
Go to this page https://medium.com/#jakebathman/building-poppler-utils-for-centos-6-5-really-e52eccffc6ae to guide you on how to get a later version of poppler-utils. I installed https://poppler.freedesktop.org/poppler-0.22.5.tar.gz instead of 0.13.4 as instructed.
All the best!
Related
I want to downgrade php version from 7.1.1 to 5.6 in xampp 7.1.1. But I can't find any option.
I think the most safest downgrade path from PHP7 to PHP5 in Xampp is:
Download a self-packaged version of Xampp with PHP5 from here (as of today this is xampp-win32-5.6.37-0-VC11.zip).
Rename the php folder to php7 in Xampp.
Now copy the php folder from xampp-win32-5.6.37-0-VC11.zip into your Xampp install folder.
Make a backup from .\xampp\apache\conf\extra\httpd-xampp.conf file.
Replace this file from xampp-win32-5.6.37-0-VC11.zip as well.
This way the config files (including php.ini) has settings from the Xampp team.
Before any changes, to verify changed Apache configs, you can compare both Xampp release folder at .\xampp\apache\conf with tools like Meld.
I should note that please download PHP 5 and 7 Xampp packages released at the same time.
Notify me if I miss something.
If you want to downgrade php from 7.1.1 to 5.6 in xampp follow the steps(For Windows):-
Go to https://sourceforge.net/projects/xampp/files/XAMPP%20Windows/5.6.36/
Download and extract the file xampp-win32-5.6.36-0-VC11.zip see the image
[image 1][1]
Delete php folder and apache folder present in C:\xampp
Copy php folder and apache folder from extracted file and paste it to C:\xampp
Add " C: " before \xampp\ to php ini file present in php folder.
Start your apache and MySQL and check php version. It will show php 5.6.36
Just delete this xampp, and download 5.6 version.
There is no option to downgrade XAMPP. XAMPP is hardcoded with specific PHP version to make sure all the modules are compatible and working properly. However if your project needs PHP 5.6, you can just install a older version of XAMPP with PHP 5.6 packaged into it.
Source: How to downgrade php from 5.5 to 5.3
Change the .htaccess code to switch to PHP 5.6:
AddHandler application/x-httpd-php56 .php
XAMPP is an integrated package and you can not downgrade or change one of its component such as php. (There are some solutions that you can use but there is little chances that everything work fine.)
You can download the package from these links:
https://www.apachefriends.org/download.html
https://sourceforge.net/projects/xampp/files/
You had better to download the old package form sourceforge.net.
You do not have to install another version of Xampp. I've managed to use PHP 5.6 on my Xampp PHP 7 version. Here is what you need to do to make it works:
Raname (backup) <XAMPP_DIR>\php to <XAMPP_DIR>\php~7
Copy (backup) <XAMPP_DIR>\apache\conf\extra\httpd-xampp.conf to <XAMPP_DIR>\apache\conf\extra\httpd-xampp~7.conf
Download PHP5 and unpack it to <XAMPP_DIR>\php
Edit <XAMPP_DIR>\apache\conf\extra\httpd-xampp.conf and change all php5 occurrences to php7. You need to change php7apache2_4.dll to php5apache2_4.dll, php7ts.dll to php5ts.dll and php7_module to php5_module
Ensure all your paths are correct like extension_dir in php.ini.
Restart Apache and voila.
If you want to downgrade php version, just simply edit yout .htaccess file.
Like you want to downgrade any php version to 5.6, just add this into .htaccess file
<FilesMatch "\.(php4|php5|php7|php3|php2|php|phtml)$">
etHandler application/x-lsphp56
</FilesMatch>
I know it might be late but I'm just adding to Lanti's answer since it's the most popular, I had the same problem as Wouter Vanherck in the comments and I can't comment yet.
What helped for me was instead of just replacing \xampp\apache\conf\extra\httpd-xampp.conf I replaced the whole apache folder. I basically did the same thing with it as with the php folder (steps 2 and 3).
Now the error is fixed and Apache starts just fine.
Using WAMP is perforce option if we want to use more then one version of php.
It is very easy to do, all you need to do is
1) download 5.6 from [1]: https://sourceforge.net/projects/xampp/files/XAMPP%20Windows/5.6.36/, the run the setup and install in folder "xampp"
2) download 7.6 from [https://sourceforge.net/projects/xampp/files/XAMPP%20Windows/7.4.2/xampp-portable-windows-x64-7.4.2-0-VC15-installer.exe/download][1] and run the setup in "xampp2"
NOte: after that you now have separate xampp installed in your system. all you do now is to run each xampp as a separate entity. Alway quite the 5.6 if you want to run 7.6
This solution is Only for local system / localhost on windows:
The simplest way to install xampp 5.6.X version as per your requirement in other windows drive then run xampp 5.6.X services from it's control panel for php 5.6 version.
NOTE: If you already have xampp (any other version) on your system then please close that xampp's services then start xampp 5.6.x services otherwise this solution will not work.
You can download your required (xampp 5.6 as per question) xampp version from below link:
https://sourceforge.net/projects/xampp/files/XAMPP%20Windows/
I have used this solution many times, it worked like charm. I hope this will also help you. Thank you to ask this question.
i was trying the same, so i downloaded the .7zip version of XAMPP with php 5.6.33 from
https://sourceforge.net/projects/xampp/files/XAMPP%20Windows/5.6.33/
then followed the steps below:
1. rename c:\xampp\php to c:\xampp\php7
2. raname C:\xampp\apache\conf\extra\httpd-xampp.conf to httpd-xampp7.OLD
3. copy php folder from XAMPP_5.6 7zip archive to c:\xampp\
4. copy file httpd-xampp.conf from XAMPP_5.6 7zip archive to C:\xampp\apache\conf\extra\
open xampp control panel and start Apache and then visit ( i am using port 82 instead of default 80)
http://localhost
and then click PHPInfo to see if it is working as expected.
Opening localhost shows dashboard
Opening phpinfo shows version 5.6
As the topic sentence says. I'm using atom with linter-php in ubuntu with an xampp setup. PHP is located in the opt/lampp/bin folder when you've installed xampp in ubuntu 16 but atom isn't accepting it. "unable to get version" and "spawn php ENOENT." Anyone out there using this same setup? Which path did you use for the php executable? Alternatively: Should i just install php in the standard file directory outside of xampp as well and direct linter there?
This may have been a bit of a hack approach to fixing this issue but i just installed php7.0 outside of xampp again and directed the linter path there. Actually didn't have to direct it at all. As soon as i installed php from the terminal, the issue was fixed.
I am attempting to configure PHP and Mongo DB to connect with one another and I'm having some troubles. Before I say the problem let me recap what I have so far.
I am using MAC OS X 10.6.8
I have mongo DB installed and working stand-alone.
I have enabled PHP on the default Mac OS Apache web server. It is working and the server recognizes PHP ( it is not allowing inline PHP scripts in HTML files...not sure if this an issue)
"Web sharing" works just fine.
I have installed pear via this url: curl -O http://pear.php.net/go-pear.phar
I have the pear folder and files accessible and have launched o-pear.php from a web browser.
I have gone through the step-by-step install process ( and removed any red displayed errors ).
Presumably Pear is now installed.
It says at the bottom of the install front end:
Note: To use PEAR without any problems you need to add your PEAR
Installation path (/Users/myname/Sites/PEAR) to your
include_path.
Using a .htaccess file or directly edit httpd.conf would be working
solutions for Apache running servers, too.
I am not sure what the code is I need to add for the httaccess rewrite.
As of this moment
Terminal does not recognize the pear command.
When I launch the pear "front end" from a web browser I get:
Fatal error: No PEAR.php in supplied PEAR directory: /Users/myname/Sites/PEAR in /Users/myname/Sites/index.php on line 24
Thank you.
That is all.
Create a new PHP file called phpinfo.php. Add the content <?php phpinfo(); ?> there. Run the script from within your webbrowser.
You should see a big page with PHP configuration information. Watch out for include_path. This is where your webserver/PHP module/process searches for include files.
You will also find Loaded Configuration File. This is the PHP configuration file being used. Open that file in any editor, and search for include_path again. Add /Users/myname/Sites/PEAR to the end of the include_path.
Restart your webserver. PEAR now should work.
If you need to install the MongoDB PHP extension, go for pecl install mongo from command line.
All the guides for installing PEAR on wampserver, such as the Symfony guide, say I am to run a go-pear.bat script within some PEAR directory.
I am on wampserver 2.1 and there is no PEAR directory and no go-pear batch script to be found.
Is this just different because I have a newer version? Is there somewhere I can download these missing installation scripts?
It's not installed per default on all setups.
But you can download the plain go-pear script for that: http://pear.php.net/go-pear
Either invoke it with php.exe go-pear or run it through your webserver as regular .php script. (It has a nice installation GUI!)
Rather new to pear myself, but my answer to a similar question:
Running Wampserver 2.2 on Win7 Professional 64bit working with PHP 5.3.8 I have found a few issues with standard way of installing with go-pear. I downloaded the go-pear.phar and ran that via cmd with no deprecated errors etc.
you could also just go to the pear site, download the zips and unzip them in the correct local folders (wamp/bin/php)
we've just solved a similar problem like this, where a copy of a live site set up on a local machine was hitting errors because PEAR was not installed. The installation process was hitting errors so we just downloaded and unzipped PEAR and the required modules directly into the correct directory.
problem solved.
Firts export in the PATH system, add you folder with php, p.e. if you have php 5.4.x in your wamp system:
PATH=...;C:\wamp\bin\php\php5.4.x;
Create a new folder p.e.:
C:\wamp\bin\php\pear\
If your php version is 5.3 or or newer you can use pyrus.phar.
Using pyrus.phar to install pear
php pyrus.phar install pear/PEAR-1.9.4
Export you PATH again:
PATH=....;C:\wamp\bin\php\pear;
you can use pear.bat, or pear.
pear.bat <arguments>
Check: for more information:
http://pear.php.net/manual/en/installationpyrus.introduction.php
http://pear2.php.net/
This worked for me on windows 7:
http://www.steptoinstall.com/install-pear-wamp-server-windows-7-8.html
NOTE: Make sure you open command prompt window in administration mode.
I downloaded the 32bit wamp and this includes the pear files. However it is best to install 1.9.2 by downloading go-pear.phar manually, as the default one didn't seem to work.
How it worked for me is,
I went to the PEAR official site and clicked on this link which brings you to go-pear.phar source. Then I saved the file by right clicking on the web page, under my php7.4 ( this is the PHP version I have set on my ENV variables ) folder.
Next opened up the command line as admin and did CD to that folder and ran the following command php go-pear.phar.
This started the PEAR installation process and asked few questions. At the end I was asked to double click on "PEAR_ENV" reg file which was inside the php folder and done.
Hope this will helpful for someone.
I am using MAMP and would like to use mongo with PHP. I am stuck because the version of MAMP I'm using is the latest version I can find, and it's running PHP 5.2.11. The only Mongo PHP install I can find for OSX is for PHP 5.3.
Is there any way to get mongo working with PHP using MAMP?
For MAMP 2.1.2 and PHP 5.4.10
Download MongoDB php driver .
copy mongo.so to
/Applications/MAMP/bin/php/php5.4.10/lib/php/extensions/no-debug-non-zts-20100525/
and using temrinal
cd /Applications/MAMP/bin/php/php5.4.10/lib/php/extensions/no-debug-non-zts-20100525/ && wget https://github.com/downloads/stennie/mongo-php-driver/mongo.so
open
/Applications/MAMP/bin/php/php5.4.10/conf/php.ini
Find ; Extensions
add
extension=mongo.so
Restart MAMP.
Above steps will install MongoDB driver 1.2.10.
To install latest Mongodb driver using PECL
install autoconf using homebrew or Mac Ports
brew install autoconf
Download php 5.4.10 source from php.net.
rename uncompressed php source folder from php-5.4.10 to php and paste it in this folder
/Applications/MAMP/bin/php/php5.4.10/include/
using the terminal open php folder and run ./configure
cd /Applications/MAMP/bin/php/php5.4.10/include/php/ && ./configure
Add MAMP bin to your ~/.bash_profile
echo "export PATH=/Applications/MAMP/bin/php/php5.4.10/bin:$PATH" >> ~/.bash_profile
source ~/.bash_profile
install latest mongo
pecl install mongo
restart MAMP server :).
Here's a tutorial how to do it: http://www.davidgolding.net/mongodb/installing-mongodb-on-mamp-1-9-5.html
Post was removed so here's the tutorial:
Appsolute launched MAMP version 1.9.5 today, so I thought it’d be a great time to add MongoDB to it and improve my NoSQL skills.
Prepare MAMP for MongoDB files
Create a new folder at Applications/MAMP/db/mongo with three additional subfolders named bin, data, and tmp. Provide these folders with chmod 0755 access permissions. These folders will be the main runtime location for Mongo once MAMP gets it running.
Download MongoDB
Grab the latest Mac OS install package of MongoDB. My server setup called for OS X 64-bit, version 1.6.5. It’ll have a directory named bin. Drop the files from this folder into the /Applications/MAMP/db/mongo/bin folder you already created.
Download Mongo Driver for PHP
I’m running PHP 5.3 (why use MongoDB with any earlier version of PHP?), so I’ll need the mongo.so extension to get PHP and Mongo working together. This is available at the MongoDB GitHub repository, under the PHP 5.3 for Mac binary. After unpacking the downloaded file, place the mongo.so extension file in the /Applications/MAMP/bin/php5.3/lib/php/extensions folder.
Update: An alternative is to place the mongo.so file in the /Applications/MAMP/bin/php5.3/lib/php/extensions/no-debug-non-zts-20090626 folder and avoid having to edit the php.ini file. It appears that MAMP 1.9.5 already has the extension=mongo.so line in the extensions block of the php.ini file, even though version 1.9.5 doesn’t come bundled with Mongo.
4. Create Startup Routines for MAMP
Lastly, you’ll need to create the startup routines so that MAMP will launch Mongo along with MySQL and Apache. Create a new file at /Applications/MAMP/bin/startMongo.sh and place in it the following code:
# /bin/sh
/Applications/MAMP/db/mongo/bin/mongod --dbpath /Applications/MAMP/db/mongo/data --logpath /Applications/MAMP/db/mongo/mongodb.log --pidfilepath /Applications/MAMP/db/mongo/tmp/mongo.pid --fork --logappend
When called, this script will launch Mongo using the MAMP-relative paths rather than Mongo’s system defaults.
Create another file at /Applications/MAMP/bin/stopMongo.sh and place the shutdown method:
# /bin/sh
/bin/kill `cat /Applications/MAMP/db/mongo/tmp/mongo.pid`
This works like the previous script, except it kills the mongo.pid process, effectively shutting down Mongo.
To have MAMP automatically call these Mongo startup scripts, open the /Applications/MAMP/bin/start.sh and /Applications/MAMP/bin/stop.sh files, and insert the following lines above the startMysql.sh lines, respectively:
1
/Applications/MAMP/bin/startMongo.sh
1
/Applications/MAMP/bin/stopMongo.sh
Now MAMP will automatically launch Mongo upon startup.
The only thing left to do is tell PHP to run the mongo.so extension. If you’re running MAMP Pro, edit the php.ini file by selecting File > Edit Template > PHP 5.3 php.ini, otherwise you’ll need to lookup the path the php.ini file from the MAMP startup screen, under “phpInfo” and “Loaded Configuration File.”
Insert the following line in the php.ini file/template, save the file, then restart MAMP.
1
extension="/Applications/MAMP/bin/php5.3/lib/php/extensions/mongo.so"
Mongo should now run in the background on MAMP, which you can connect with from PHP using the main connection routines listed on the PHP site. Welcome to NoSQL on MAMP!
MAMP is now at version 2.2, which comes with PHP v 5.5.3. I managed to get Mongodb working had to jump through a few hoops to get there.
Start with a clean install of MAMP 2.2, make sure that's working.
1. I made this the system version of PHP, (not sure if necessary at this stage).
Find out the default version of php you are using, with the terminal command
$ which php
/usr/bin/php
Then back this up
$ sudo mv /usr/bin/php /usr/bin/php.bak
Then create a symlink to the MAMP latest version of php
$ sudo ln -s /Applications/MAMP/bin/php/php5.5.3/bin/php /usr/bin/php
Check this has been updated
$ which php
/Applications/MAMP/bin/php/php5.5.3/bin/php
2. Installing Mongo
$ cd /Applications/MAMP/db
$ curl http://downloads.mongodb.org/osx/mongodb-osx-x86_64-2.4.6.tgz > mongodb.tgz
$ tar -zxvf mongodb.tgz
$ rm mongodb.tgz
$ mv mongodb* mongo
$ mkdir mongo/data/db
Test to make sure mongo is working
$ ./mongo/bin/mongod --dbpath /Applications/MAMP/db/mongo/data/db
Should output some code, ending in 'waiting for connections on port 27017' press Ctrl + C to quit for now.
3. Now we can create a script to start/stop mongod automatically from the MAMP GUI. This inspiration came from a previous answer, by Alexandru Rada, but didn't quite work how he explained - I think this is to do with being a newer MAMP version.
In /Applications/MAMP/bin create a file called startMongo.sh and insert the following
# /bin/sh
/Applications/MAMP/db/mongo/bin/mongod --dbpath /Applications/MAMP/db/mongo/data/db --logpath /Applications/MAMP/logs/mongodb.log --pidfilepath /Applications/MAMP/tmp/mongo/mongo.pid --fork --logappend
I also created the mongo tmp folder at /Applications/MAMP/tmp/mongo
In the same bin directory create a file called stopMongo.sh and insert the following:
# /bin/sh
/bin/kill `cat /Applications/MAMP/tmp/mongo/mongo.pid`
Make these files executable
$ chmod 775 /Applications/MAMP/bin/startMongo.sh /Applications/MAMP/bin/stopMongo.sh
Now update the startApache.sh and stopApache.sh scripts to include our new files respectively.
Use the Activity Monitor in /Applications/Utilities and search for mongod. When you now start MAMP you should see the process mongod is started. When you stop or quit MAMP you should see this process is automatically killed.
4. We still need to install the mongo-php driver, which is also a pain. To do this I added the MAMP bin directory to my bash $PATH variable. To do this I had to edit the hidden file ~/.profile - but be aware that your $PATH might be loaded from somewhere else.
export PATH=$PATH:/Applications/MAMP/bin/php/php5.5.3/bin:/Applications/MAMP/db/mongo/bin
Note that each element is separated by a :. Quit terminal and re-open, then $ echo $PATH to check your new directories have been added to the path. You could also try $ which pecl or $ which mongod.
We still need some extras from PHP php.net download the same php stable version and unzip it. Create the folder 'include' at /Applications/MAMP/bin/php/php5.5.3/include . Drag the unzipped stable version of php to the include folder, and rename it to just 'php'.
$ cd /Applications/MAMP/bin/php/php5.5.3/include/php
$ ./configure
Now at last, we can hopefully run
$ sudo pecl install mongo
5. Now we just need to update our php config file to add the mongo.so extension.
Open /Applications/MAMP/bin/php/php5.5.3/conf/php.ini in a text editor, under the 'extensions' section, add in
extension=mongo.so
Quit and re-open MAMP!
Mac OS X 10.6 Snow Leopard (with the newest updates) has PHP 5.3 installed along with Apache.
You can enable the installed Apache in System Preferences, Sharing, Web Sharing (there is a help icon (?) which shows you details on using the system's web server).
See also this StackOverflow question:
Easiest way to activate PHP and MySQL on Mac OS 10.6 (Snow Leopard)?
Here's the way I did it and it was fairly simple.
First, read what Mongo says # http://www.mongodb.org/display/DOCS/PHP+Language+Center
When you run sudo pecl install mongo it's going to install it for the standard OSX PHP installation to use, so if for some reason you're using the built-in Apache installation.
Like you, I like using MAMP. I didn't want to go through figuring how to download Mongo into MAMP, so I just creating a symbolic link in the MAMP PHP Extensions folder and put the extension line in the MAMP php.ini. Restarted MAMP Apache and everything worked beautifully!
A couple things to note, after installing Mongo, note the extensions folder it installed it into then check MAMP php.ini to see where it has its extensions set to be. You'll notice the ending is very similar.
For MAMP PRO 2.0.5
You may compile your own mongo.so (http://m-schmidt.eu/2011/11/06/develop-mongodb-web-apps-with-mamp-under-mac-os-x/) or download compiled (http://www.davidgolding.net/mongodb/installing-mongodb-on-mamp-1-9-5.html).
I'd like compile.
After steps mongo.so don't include to php configuration, because in MAMP PRO php.ini placed in
/Applications/MAMP PRO/MAMP PRO.app/Contents/Resources
I using php5.3.6.ini file for my configuration.