When i use php in cmd Windows console i got the following error:
C:\wamp64\bin\php\php5.6.25>php
PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.6.25/ext/php_bz2.dll' - No se puede encontrar el m¾dulo especificado.
in Unknown on line 0
[...]
And continues whit ALL the dll libraries. I Chek the rute and its ok. And when my wamp start a page whit php i dont get this error
For example i got the error when i type:
cd C:\wamp64\www\ServicioApp\scripts
php script_notificaciones.php
I run php --ini and search in the file, and i got:
extension_dir ="c:/wamp/bin/php/php5.6.25/ext/"
My guess is that WAMP (its Apache config) looks for php.ini in different location than command line invoked script - run php --ini in console to find it. You will need to check and fix (or disable) extension paths there.
Search for line with extension_dir - it should point to ext folder with extensions (dlls). You may need to switch to backslashes there:
extension_dir = "c:\wamp\bin\php\php5.6.25\ext"
I found the problem my rute was:
c:/wamp/bin/php/php5.6.25/ext/
And must be:
c:/wamp64/bin/php/php5.6.25/ext/
I miss the 64*
When i am trying to start Apache, the following error appears in the Apache error log:
PHP Fatal error: [ionCube Loader] The Loader must appear as the first
entry in the php.ini file in Unknown on line 0
From the error message itself its clear what is the error. Please do some research before posting on stackoverflow.
Zend extensions can be loaded directly from /etc/php.ini file or included from /etc/php.d/ directory.
In the following example, this ioncube line must appear before any Zend configuration sections. These sections usually begin with [Zend] so they should be easy to see:
zend_extension=/usr/lib/ioncube/php_ioncube_loader_lin_X.X.so
If extensions are loaded from /etc/php.d, they are loaded in alphabetical order. Usually the ioncube file is named /etc/php.d/ioncube.ini and zend is /etc/php.d/zend.ini. In this scenario, it should not present a problem.
Finally, make sure that ioncube is loaded only once. The following command should only return one result:
grep 'zend_extension.ioncube' /etc/php.ini /etc/php.d/
If you make any configuration changes, always be sure to restart Apache:
/etc/init.d/httpd restart
https://mediatemple.net/community/products/dv/204404974/resolve-apache-error:-%22php-fatal-error:-%5Bioncube-loader%5D%22
Came to this thread when looking for this error, as #Hari Swaminathan said.
If extensions are loaded from /etc/php.d, they are loaded in alphabetical order
I got the error on a docker setup. So naming ini file like 00-ioncube.ini solved the problem
This error occurs because of an incorrect extension order in PHP configuration. Read this website may help you.
You must load ioncube with higher priority.
Had the same issue on a docker local development
Was able to ADD a ioncube specific ini file and module file
# Add ioncube
ADD etc/ioncube_loader_lin_7.2.so $PHP_EXT_DIR/ioncube_loader_lin_7.2.so
# Add php overrides
ADD etc/docker-php-ext-ioncube.ini $PHP_INI_DIR/conf.d/docker-php-ext-ioncube.ini
Thanks #davidmpaz
On Mac OSX Mavericks using homebrew php55 whenever I run a a php command I get the following error message (everything runs fine it's just annoying)
PHP Warning: Module 'intl' already loaded in Unknown on line 0
I ran
php --ini
and the output was
php --ini
PHP Warning: Module 'intl' already loaded in Unknown on line 0
Warning: Module 'intl' already loaded in Unknown on line 0
Configuration File (php.ini) Path: /usr/local/etc/php/5.5
Loaded Configuration File: /usr/local/etc/php/5.5/php.ini
Scan for additional .ini files in: /usr/local/etc/php/5.5/conf.d
Additional .ini files parsed: /usr/local/etc/php/5.5/conf.d/ext-apcu.ini,
/usr/local/etc/php/5.5/conf.d/ext-igbinary.ini,
/usr/local/etc/php/5.5/conf.d/ext-intl.ini,
/usr/local/etc/php/5.5/conf.d/ext-memcached.ini,
/usr/local/etc/php/5.5/conf.d/ext-mongo.ini,
/usr/local/etc/php/5.5/conf.d/ext-uuid.ini,
/usr/local/etc/php/5.5/conf.d/ext-xdebug.ini
Checked in the php.ini file and the only place intl is loaded is at the top and it's commented out. The other files contents look something like:
extension="/usr/local/Cellar/php55/5.5.23/lib/php/extensions/no-debug-non-zts-20121212/intl.so"
where the contents after the last slash is the extension.
I'm not sure where else to look.
Any help is appreciated
I think you have loaded Xdebug probably twice in php.ini.
check the php.ini, that not have set xdebug.so for the values extension= and zend_extension=.
Check also /etc/php5/apache2 and /etc/php5/cli/. You should not load in each php.ini in these directories the extension xdebug.so. Only one file, php.ini should load it.
Note: Inside the path is the string /etc/php5. The 5 is the version of PHP. So if you use another version, you always get a different path, like php7.
I had the same issue on mac i.e. Warning: Module 'pdo_pgsql' already loaded in Unknown on line 0.
Here's how I solved it.
Locate the folder conf.d, mine was in the directory
/usr/local/etc/php/7.0/conf.d.
In this folder, there's a file called ext-pdo_pgsql.ini.
Type sudo nano ext-pdo_pgsql.ini to edit it.
There should be a line extension="/usr/local/opt/php70-pdo-pgsql/pdo_pgsql.so". Comment it
out by adding semi-colon to the beginning of the line i.e.
;extension="/usr/local/opt/php70-pdo-pgsql/pdo_pgsql.so".
Save the file. (I usually run control + O, control + M).
Exit the file (control + X).
Hope this helps someone.
To fix this problem, you must edit your php.ini (or extensions.ini) file and comment-out the extensions that are already compiled-in. For example, after editing, your ini file may look like the lines below:
;extension=pcre.so
;extension=spl.so
Source: http://www.somacon.com/p520.php
You should have a /etc/php2/conf.d directory (At least on Ubuntu I do) containing a bunch of .ini files which all get loaded when php runs. These files can contain duplicate settings that conflict with settings in php.ini. In my PHP installation I notice a file conf.d/20-intl.ini with an extension=intl.so setting. I bet that's your conflict.
In my case I had uncoment the ;extension=php_curl.so in php.ini, but Ubuntu was already calling this extension somewhere else.
To find this "somewhere else", on php.ini will informe. On my case:
/etc/php/7.1/apache2/conf.d/20-curl.ini was the path.
So now we edit this file (terminal):
sudo nano /etc/php/7.1/apache2/conf.d/20-curl.ini
Comment the ;extension=php_curl.so
Save file and restart apache:
sudo systemctl restart apache2
solved by commenting extension=curl
For issue related to code igniter project upload,
go to the base directory index.php and add this code:
if ($_SERVER['SERVER_NAME'] == 'local_server_name') {
define('ENVIRONMENT', 'development');
} else {
define('ENVIRONMENT', 'production');
}
if (defined('ENVIRONMENT')){
switch (ENVIRONMENT){
case 'development':
error_reporting(E_ALL);
break;
case 'testing':
case 'production':
error_reporting(0);
break;
default:
exit('The application environment is not set correctly.');
}
}
define('ENVIRONMENT', isset($_SERVER['CI_ENV']) ? $_SERVER['CI_ENV'] : 'development');
For shared hosting, in cPanel I unchecked the Module in question under "Select PHP Version" > "Extensions" and the error disappeared for PHP 7.4.
I had the same issue after upgrading from Fedora Server 24 (PHP 5) to 25 (PHP 7). After investigation, I found that /etc/php.d/ had two different .ini files loading extension=geoip.so.
Previous version of distros had this file named 50-geoip.ini but the recent was changed to 40-geoip.ini, and I suspect that in the version-upgrade process the old hasn't been removed, while the new one has been created.
That was the actual case of the issue. After removing stray 50-geoip.ini from /etc/php.d/ and restarting httpd it just worked flawlessly.
I deleted the 20-mongo.ini file in /etc/php5/cli/conf.d and this solved the problem.
I figured this out by printing the PHP configuration and searching by xml.ini. Notice in the following output how xml is loaded twice (first as 20-xml.ini and then as xml.ini):
$ php -i | grep xml
/etc/php.d/20-simplexml.ini,
/etc/php.d/20-xml.ini,
/etc/php.d/20-xmlwriter.ini,
/etc/php.d/30-xmlreader.ini,
/etc/php.d/xml.ini
xmlrpc_error_number => 0 => 0
xmlrpc_errors => Off => Off
libxml Version => 2.9.1
libxml
mbstring.http_output_conv_mimetypes => ^(text/|application/xhtml\+xml) => ^(text /|application/xhtml\+xml)
xml
libxml2 Version => 2.9.1
xmlreader
xmlwriter
libxslt compiled against libxml Version => 2.9.1
There are two "php_intl.dll" files inside php.ini file on 872 and 968 number lines. if php warning module 'intl' already loaded in unknown on line 0 this message is focused on your CLI. Then you should have to remove the semiclone prefixes on line 872. I expect this will done.....
Just for the record as it might help others who are on shared hosting (cPanel).
I had error on shared hosting php7.2:
Module 'imagick' already loaded in Unknown on line 0
In the beginning hosting provider said it was my bad configuration (running Yii2.16). But after I showed them, that all Internet related this issue to server configuration -they started to listen to me. After I proved, that there was no error on php7.1 they started to search for the error.
As they told to me - the error was due to configuration in PERL modules or PEAR package, but they did not told me the real issue.
So, if you are on shared hosting - talk to you provider and experiment with PHP versions (if you can change them).
Comment out these two lines in php.ini
;extension=imagick.so
;extension="ixed.5.6.lin"
it should fix the issue.
In Windows 10, I fix this by comment like this
;extension=php_sockets.dll
Run php --ini and notice file path on Loaded Configuration File.
Then run command like cat -n /etc/php/7.2/cli/php.ini | grep intl to find if the extension is commented or not.
Then update loaded configuration file by commenting line by adding ; such as ;extension=intl
This can happen when you install php-intl package and also enable the same extension on php.ini file.
If you are on shared hosting, just apply the default php settings. Cpanel overrides php settings to default.
I am using WAMP in Windows 10 with PHP 7.2.10. I was able to solve it through commenting the line extension=ftp in php.ini inside wamp64\bin\php\php7.2.10 .
I am unsure but my guess why this happens is that my php.ini inside wamp64\bin\apache\apache2.4.35\bin already loads this module.
Be sure to restart all services of WAMP after doing so.
I had the same issue so I commented the extension=mysqli as I included this to run sql server. Check if you have uncommented this extension=mysqli if so, place ; in php.ini
I resolved this issue by removing php.ini file from extension=grpc commenting like this ;extension=grpc
I had a similar problem, the problem was that the extension intl was duplicated.
You can check in file C:/xampp/php/php.ini and find "intl". In my case extension=intl is already present and I scrolled again and found a second intl "extension=php_intl.dll".
The extension must one to execution can't execution extension intl again. This will show error like this "Module 'intl' already loaded".
I fixed it by commenting out extension=php_intl.dll using ";" like this ;extension=php_intl.dll. and restarted the apache service.
I get this error on my production server (CentOS 5.4 and php 5.3.5) :
Warning: include_once(PharData.php): failed to open stream: No such
file or directory in /var/www/ZendFramework/library/Zend/Loader.php on
line 146
Warning: include_once(): Failed opening 'PharData.php' for inclusion
(include_path='/var/www/fw:/var/www/vmms:/var/www/ZendFw/library:.:/usr/share/pear:/usr/share/php')
in /var/www/ZendFw/library/Zend/Loader.php on line 146
Fatal error: Class 'PharData' not found in
/var/www/vm/app/Backup.php on line 40
And this is the code which fail :
$phar = new PharData($imageBackupFile);
$phar->buildFromDirectory($imageDir);
Logger::info("Image directory backed up to: $imageBackupFile");
This code is working fine on my own computer.
PharData should be included by default in php 5.3+ ...
Thanks for your help!
UPDATE :
I am using the Zend Auto loader feature to load the good php files using this code :
require_once("Zend/Loader/Autoloader.php");
$autoloader = Zend_Loader_Autoloader::getInstance()->setFallbackAutoloader(true);
Zend autoloader is doing the include_once(PharData.php).
Just because Phar is bundled by default in PHP 5.3 doesn't mean that it's necessarily included in your install. When you build PHP with ./configure, you can pass the --disable-phar to disable the Phar extension.
To confirm this, run the following script:
<?php
phpinfo();
?>
One of the first sections to appear will be the Configure Command section. Review this section to see if the --disable-phar switch is present, and if there is a Phar section to the page in general.
If it's not present, you'll need to contact your host to have it enabled. There's a decent chance, however, that they won't do it for you since it could impact other users depending on how their servers are set up. If this is on your own machine, you'll need to either rebuild PHP without that switch, or install Phar manually from PECL (no idea if this would still work in 5.3, but I don't see why it wouldn't).
I am getting both modules listed as installed / configured when I use:
php -m
or if I use:
php -i
but when I use:
$m = new Memcache;
// or
$m = new Memcache();
// or
$m = new Memcached();
//or
$m = new Memcached;
I get the following error:
Fatal error: Class 'Memcached' not found
I am running on a Mac - OS X (10.5.7) with default install of apache & php. Additionally, I have memcached running as a daemon on 127.0.0.1:11211 and libmemcache as required by the php-memcached library. I have restarted apache tons of times and even done a machine restart.
Does anyone know why the modules/extensions show up in the command line but not in my phpinfo()? I am literally stumped, after 3 hours of googling, I am just about ready to give up.
Also, please note, my phpinfo() outputs my ini files as follows AND they are both the exact same file:
Configuration File (php.ini) Path: /etc
Loaded Configuration File: /private/etc/php.ini
UPDATE:
Apache is failing to load the extension.
[Fri May 14 04:22:26 2010] [warn]
Init: Session Cache is not configured
[hint: SSLSessionCache] PHP Warning:
PHP Startup: Unable to load dynamic
library
'/usr/lib/php/extensions/no-debug-non-zts-20060613/memcached.so'
- (null) in Unknown on line 0 PHP Warning: PHP Startup: Unable to load
dynamic library
'/usr/lib/php/extensions/no-debug-non-zts-20060613/memcache.so'
- (null) in Unknown on line 0
Does anyone know why or how this would happen? Both of the files referenced above DEFINITELY ARE there. Should I move this question to server fault?
Your webserver is probably using mod_php, which is a seperate bit of code from the standalone (CLI) interpreter. If they are both using the same ini file, and the memcache extension is configured in the ini file, then it sounds like for some reason, the mod_php is failing to load the extension - check your webserver error_log for startup errors.
It may be that the mod_php was compiled without memcache support (most extensions need to have a stub file linked into the php code, even though the bulk of the code is not linked until run time). Or it may be a permissions problem on the shared object file. Or your webserver may be running chroot, and unable to find the extension (which would also mean that although the ini files appear to have the same path, this is relative to different roots).
HTH
C.
because both versions use different php.ini
place your php.ini into location noted in the phpinfo() outout
I would suspect that the issue revolves around permissions. When you run php from comand line, it runs as the user invoking it. When run as an apache module, it runs as "nobody".
I would assume that the memcached.so file, or the directory it's in does not have proper permissions.
I stumpled upon this post and was having the exact same problem with an extension in my php -i but not in phpinfo(). Mine was a permissions problem because of selinux on a CentOS machine. I had to change ownership and permissions and now it is working as expected.
Set php path in environment variables as given below.
Right-click on "My Computer"
Properties
Advanced Tab > Environment Variables
Under System variables, scroll down to find "Path", select and click on Edit.
Add path to your php install on the end (make sure to precede with semi-colon ";"). Example: ";C:\php7"
Click Ok.