I am using php7 in my project. I have enabled intl in php.ini file by un-comment the following line.
;extension=php_intl.dll
Then copied ic*.dll file from php folder to apache/bin folder. Also I have checked the Environment Variables.
All are correct, but still it shows error
PHP - INTL Extension is missing.
Please help me. How can i solve this.
Cause:
If you have installed the unbundled PHP version, the extension is not installed on the system. (unless you’ve installed it separately)
If you have the bundled PHP version, the extension might be existing but not enabled.
Make sure the php_intl.dll file exists within your php extensions directory
for separately installed PHP: C:\path\to\php\ext\
for xampp: C:\path\to\xampp\php\ext
(note: your drive letter might be different)
If the file exists:
Search for the config file (php.ini, usually in the same folder as the php executable) and open it
Make sure the line “extension=php_intl.dll” is existing and not commented
Restart the web server (usually apache)
Check if the extension is enabled using phpinfo()
If the file doesn’t exist:
Check your php version by running the “php -v” command
Download the PHP version that corresponds to yours from the PHP Downloads Page (TS/NTS, x86/x64)
To find thread safety for php, run: php -i | findstr “Thread” , source & more info.
Search for the php_intl.dll file in the ext folder in that version and copy it in your php\ext folder
Repeat the steps for the case in which the file exists
Edit: changed php7.0 occurrences with php7.x as the version may vary.
For more information about the solution, check link.
Apparently, the .dll file is missing from your system.
Please check this link to download and install your PHP intl extension. Also do check, whether they are pointing at the right directories.
Hope this will solve your problem.
Related
I have WAMPSERVER 3.0.6 64 bit.
I have updated PHP version 5.6.25 from 7.0.10.
I have installed updated version of Moodle 3.4 and have tried to run but getting the issue is following -
Intl extension is required to improve internationalization support, such as locale aware sorting and international domain names.
For resolving this issue I have tried so many tips but could not resolve this issue.
Even after doing the steps in moodle doc
if it is not working, Try to do this.
Change the directory to php folder(server/PHP/) and type the this command
deplister.exe ext\php_intl.dll
It list down all the .dll files in moodle.
If there is any file 'Notfound', Download missing dlls from : dllfiles.com
For 64-Bit windows you have to download 32-Bit file + 64-Bit file
Copy msvcp140.dll (32-bit file) into C:/Windows/SYSWOW64
Copy msvcp140.dll (64-bit file) into C:/Windows/System32
Check if it is using deplister.exe ext\php_intl.dll command.
Refresh and see the environment by Site Administration->Server -> Environment
Maybe this will be a late answer. Anyways, if someone stll looking for information, these steps could help:
open PHP.ini in edit mode using notepad or whatever editor
add:
extension= php_intl.dll
Then add:
[intl]
intl.default_locale = en_utf8
intl.error_level = E_WARNING
You may need to restart the webserver
It will work fine
In my case, I realized I did not have all the necessary .dll files. To check missing files go to xampp/php in your cmd terminal and type deplister.dll ext\php_intl.dll
See image
You will see list of all both available and missing files marked as Ok or Notfound
then download the files from here https://www.dll-files.com/search/?q=string. Extract the files and place the .dll file at windows/system32. Remember this requires administrative privileges.
I run a PHP script and get this error:
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/local/lib/php/extensions/no-debug-non-zts-20090626/ixed.5.2.lin' - /usr/local/lib/php/extensions/no-debug-non-zts-20090626/ixed.5.2.lin: cannot open shared object file: No such file or directory in Unknown on line 0
What does that mean?
It means there is an extension=... or zend_extension=... line in one of your php configuration files (php.ini, or another close to it) that is trying to load that extension : ixed.5.2.lin
Unfortunately that file or path doesn't exist or the permissions are incorrect.
Try to search in the .ini files that are loaded by PHP (phpinfo() can indicate which ones are) - one of them should try to load that extension.
Either correct the path to the file or comment out the corresponding line.
If you're on Linux, you can find all loaded configuration files by typing this in shell:
php -r "print phpinfo();" | grep ".ini"
UPDATE:
As mentioned in comments, this can be even more accurate:
php -i | grep ini
phpStom with XAMPP
TL;DR Except from verifying that the files exist, you might need to add the drive letter to some records in your php.ini file
I suddenly started having a problem using phpStorm 7 for debugging php with xampp and xdebug. When trying to set intellij interperter to be xampps php I got a lot of the warnings like the one in the question, for example:
Unable to load dynamic library '/xampp/php/ext/php_bz2.dll'
For some reason I had to add my drive letter to the records of extension_dir and browscap in the php.ini file:
extension_dir = "\xampp\php\ext"
browscap = "\xampp\php\extras\browscap.ini"
to
extension_dir = "e:\xampp\php\ext"
browscap = "e:\xampp\php\extras\browscap.ini"
If you just want to make the error disappear, and you don't need the extension, then by all means comment the line out in php.ini. But if you actually want to fix the problem here is some additional info.
There are various causes for this based on the exact module, but there are also some general guidelines.
Open phpinfo() and look for extension_dir under the Core section. This is where your modules should be located.
For instance, /usr/lib/php/modules for Unix/Linux.
If the file does in fact exist, make sure permissions are adequate.
If the file does not exist, use the resources below to install it.
Installation on *nix (PEAR)
Installation of extensions on Windows
Loading .dll in Linux
I've encountered this warning message while I was trying to install a php-extension via the php.ini file;
until I figured out that you cannot load .dll extensions in Linux,
but you have to comment the extensions that you want to import ;extension= ... .dll and install it correctly via sudo apt-get install php-...
note: ... is the extension name you want to enable.
php -r "echo php_ini_loaded_file();"
Will show in CLI current ini loaded file, search there for Your extension, path to it is incorrect.
In my case, this message started to appear when I updated the php version to 7.4.
To solve it I had to look for the php.ini files found inside the php version folder (/etc/php/7.4/apache2/ && /etc/php/7.4/cli/) checking the lines where the extensions I could see that the extensions gd2 and intl were uncommented.
Note that you can also get this error if your PHP library doesn't have the "other" directory opening permission. In my particular case, I noticed this when using php -l to syntax check a script in my text editor. This meant that since my account was called "volomike", that account didn't have permission to run the libraries that the php command relied upon.
For instance, on Ubuntu 14.04, I had PHP5 installed automatically into the path /usr/lib/php5/20121212+lfs. However, because I was working in C++ in building some shared objects, I messed around with the directory permissions and screwed things up such that non-root accounts did not have the directory execute (directory open) permissions to view /usr/lib/php5/20121212+lfs. So, I typed the following command to rectify that problem:
sudo chmod o+x /usr/lib/php5/20121212+lfs.
Now when I do php -l example.php as a non-root user, it never gives me this "Unabled to load dynamic library" problem anymore.
I had the same problem on XAMPP for Windows when I try to install composer.
I did php -v and php throwing error :
Unable to load dynamic library '/xampp/php/ext/php_bz2.dll'
It took me a while until I realized that I need to setup my XAMPP. So I run setup_xampp.bat and php return to works like a charm.
I had this error on a number of modules when I had been running different versions of PHP side by side on my server. To sort this out, I needed to install the packages it couldn't find for that specific PHP version. So, for example, if I saw:-
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/20160303/xml.so'
I would install the library for the PHP version specifically:-
sudo apt-get install php7.1-xml
And then restart Apache. Fixed it for me. You can check your version like this:-
php -v
I had the same problem on XAMPP for Windows10 when I try to install composer.
Unable to load dynamic library '/xampp/php/ext/php_bz2.dll'
Then follow this steps
just open your current_xampp_containing_drive:\xampp(default_xampp_folder)\php\php.ini in texteditor (like notepad++)
now just find - is the current_xampp_containing_drive:\xampp exist?
if not then find the "extension_dir" and get the drive name(c,d or your desired drive) like.
extension_dir="F:\xampp731\php\ext" (here finded_drive_name_from_the_file is F)
again replace with finded_drive_name_from_the_file:\xampp with current_xampp_containing_drive:\xampp and save.
now again start the composer installation progress, i think your problem will be solved.
What I did was;
1 - I first find out what version of PHP I am using thru the function phpinfo()
<?php
phpinfo();
?>
2 - From there you will find the location of your configuration(php.ini) file
3 - Open that file
4 - Comment out the line similar to the image below
This might be a different value but it should be related to extension.
I am no expert but this process helped me solved similar problem.
In my case I got this error because I downloaded a thread-safe version of the dll (infixed with -ts-), but my installation of php was a non-thread-safe (infixed with -nts-). Downloading the right version of the dll, exactly matching my php installation version fixed the issue.
After Windows 10 XAMPP now I installed LAMPP (XAMPP) on Ubuntu. Windows XAMPP had a lot less to configure compare to MAC (iOS) but now with Linux Ubuntu I had a few more since there are more going in Linux (a good thing).
I confused and activated mysqli.dll (and mysql.dll: erase "#" in /etc/php/7.2/cli/php.ini
I started to get the PHP Warning: PHP Startup: Unable to load dynamic library message related to dll. I commented out mysql(and i).dll in the same file but the message didn't go away up until I commented out " " in /opt/lampp/etc/php.ini.
Looks like XAMPP reads php.ini file from /etc/php/7.2/cli and makes modification in php.ini of /opt/lampp/etc. (;extension=php_pdo_mysql.dll after ";" restarted Apache and no more any message.
I encountered a similar error. The mistake I made was to use the "controller" name as "Pages" instead of "pages" in my url.
In Windows, it could be a wrong path in "System environment variables".
"Path" to the php.exe directory must be the good one.
'C:/PHP/5.2.13/ext\php_mcrypt1.dll'
I'd say there's some typo on your php.ini (the extra 1). Perhaps you're loading a different php.ini from what you expect (see the output of php.ini to make sure).
Other than that make sure that php_mcrypt.dll and PHP:
Were linked to the same VC runtime library (typically msvcrt.dll for VC6 or msvcrt90.dll for VC9) – use e.g. the dependency walker for this
Are both debug builds or both release builds
Both have ZTS enabled or ZTS disabled
For libraries that depend on further libraries (DLLs), make sure they are available (e.g. in the same directory as the extension)
PHP should give you meaning errors if any of the first three conditions above is not satisfied, but I wrote those anyway because I'm not sure for PHP 5.2.
From C:\xampp\php\php.exe I got
Unable to load dynamic library ''
C:\xampp\php\ext\php_.dll (The specified module could not be found.)
I solved by commenting out
C:\xampp\php\php.ini
;extension=
I had the same problem when I tried to use php with sql server, when I added the sqlsrv libraries ... it gave me the error, after several days of researching there, I understood that microsoft does not support x64 in this case so what I did was install laragon x86 and use the corresponding libraries. I hope it helps with something
Go to system env variable and set the php ext dir path as
C:\xampp\php\ext
basically it's finding the ext directory and then locating it's file but it's unable to find the files becuase php path is set as different.
I run a PHP script and get this error:
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/local/lib/php/extensions/no-debug-non-zts-20090626/ixed.5.2.lin' - /usr/local/lib/php/extensions/no-debug-non-zts-20090626/ixed.5.2.lin: cannot open shared object file: No such file or directory in Unknown on line 0
What does that mean?
It means there is an extension=... or zend_extension=... line in one of your php configuration files (php.ini, or another close to it) that is trying to load that extension : ixed.5.2.lin
Unfortunately that file or path doesn't exist or the permissions are incorrect.
Try to search in the .ini files that are loaded by PHP (phpinfo() can indicate which ones are) - one of them should try to load that extension.
Either correct the path to the file or comment out the corresponding line.
If you're on Linux, you can find all loaded configuration files by typing this in shell:
php -r "print phpinfo();" | grep ".ini"
UPDATE:
As mentioned in comments, this can be even more accurate:
php -i | grep ini
phpStom with XAMPP
TL;DR Except from verifying that the files exist, you might need to add the drive letter to some records in your php.ini file
I suddenly started having a problem using phpStorm 7 for debugging php with xampp and xdebug. When trying to set intellij interperter to be xampps php I got a lot of the warnings like the one in the question, for example:
Unable to load dynamic library '/xampp/php/ext/php_bz2.dll'
For some reason I had to add my drive letter to the records of extension_dir and browscap in the php.ini file:
extension_dir = "\xampp\php\ext"
browscap = "\xampp\php\extras\browscap.ini"
to
extension_dir = "e:\xampp\php\ext"
browscap = "e:\xampp\php\extras\browscap.ini"
If you just want to make the error disappear, and you don't need the extension, then by all means comment the line out in php.ini. But if you actually want to fix the problem here is some additional info.
There are various causes for this based on the exact module, but there are also some general guidelines.
Open phpinfo() and look for extension_dir under the Core section. This is where your modules should be located.
For instance, /usr/lib/php/modules for Unix/Linux.
If the file does in fact exist, make sure permissions are adequate.
If the file does not exist, use the resources below to install it.
Installation on *nix (PEAR)
Installation of extensions on Windows
Loading .dll in Linux
I've encountered this warning message while I was trying to install a php-extension via the php.ini file;
until I figured out that you cannot load .dll extensions in Linux,
but you have to comment the extensions that you want to import ;extension= ... .dll and install it correctly via sudo apt-get install php-...
note: ... is the extension name you want to enable.
php -r "echo php_ini_loaded_file();"
Will show in CLI current ini loaded file, search there for Your extension, path to it is incorrect.
In my case, this message started to appear when I updated the php version to 7.4.
To solve it I had to look for the php.ini files found inside the php version folder (/etc/php/7.4/apache2/ && /etc/php/7.4/cli/) checking the lines where the extensions I could see that the extensions gd2 and intl were uncommented.
Note that you can also get this error if your PHP library doesn't have the "other" directory opening permission. In my particular case, I noticed this when using php -l to syntax check a script in my text editor. This meant that since my account was called "volomike", that account didn't have permission to run the libraries that the php command relied upon.
For instance, on Ubuntu 14.04, I had PHP5 installed automatically into the path /usr/lib/php5/20121212+lfs. However, because I was working in C++ in building some shared objects, I messed around with the directory permissions and screwed things up such that non-root accounts did not have the directory execute (directory open) permissions to view /usr/lib/php5/20121212+lfs. So, I typed the following command to rectify that problem:
sudo chmod o+x /usr/lib/php5/20121212+lfs.
Now when I do php -l example.php as a non-root user, it never gives me this "Unabled to load dynamic library" problem anymore.
I had the same problem on XAMPP for Windows when I try to install composer.
I did php -v and php throwing error :
Unable to load dynamic library '/xampp/php/ext/php_bz2.dll'
It took me a while until I realized that I need to setup my XAMPP. So I run setup_xampp.bat and php return to works like a charm.
I had this error on a number of modules when I had been running different versions of PHP side by side on my server. To sort this out, I needed to install the packages it couldn't find for that specific PHP version. So, for example, if I saw:-
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/20160303/xml.so'
I would install the library for the PHP version specifically:-
sudo apt-get install php7.1-xml
And then restart Apache. Fixed it for me. You can check your version like this:-
php -v
I had the same problem on XAMPP for Windows10 when I try to install composer.
Unable to load dynamic library '/xampp/php/ext/php_bz2.dll'
Then follow this steps
just open your current_xampp_containing_drive:\xampp(default_xampp_folder)\php\php.ini in texteditor (like notepad++)
now just find - is the current_xampp_containing_drive:\xampp exist?
if not then find the "extension_dir" and get the drive name(c,d or your desired drive) like.
extension_dir="F:\xampp731\php\ext" (here finded_drive_name_from_the_file is F)
again replace with finded_drive_name_from_the_file:\xampp with current_xampp_containing_drive:\xampp and save.
now again start the composer installation progress, i think your problem will be solved.
What I did was;
1 - I first find out what version of PHP I am using thru the function phpinfo()
<?php
phpinfo();
?>
2 - From there you will find the location of your configuration(php.ini) file
3 - Open that file
4 - Comment out the line similar to the image below
This might be a different value but it should be related to extension.
I am no expert but this process helped me solved similar problem.
In my case I got this error because I downloaded a thread-safe version of the dll (infixed with -ts-), but my installation of php was a non-thread-safe (infixed with -nts-). Downloading the right version of the dll, exactly matching my php installation version fixed the issue.
After Windows 10 XAMPP now I installed LAMPP (XAMPP) on Ubuntu. Windows XAMPP had a lot less to configure compare to MAC (iOS) but now with Linux Ubuntu I had a few more since there are more going in Linux (a good thing).
I confused and activated mysqli.dll (and mysql.dll: erase "#" in /etc/php/7.2/cli/php.ini
I started to get the PHP Warning: PHP Startup: Unable to load dynamic library message related to dll. I commented out mysql(and i).dll in the same file but the message didn't go away up until I commented out " " in /opt/lampp/etc/php.ini.
Looks like XAMPP reads php.ini file from /etc/php/7.2/cli and makes modification in php.ini of /opt/lampp/etc. (;extension=php_pdo_mysql.dll after ";" restarted Apache and no more any message.
I encountered a similar error. The mistake I made was to use the "controller" name as "Pages" instead of "pages" in my url.
In Windows, it could be a wrong path in "System environment variables".
"Path" to the php.exe directory must be the good one.
'C:/PHP/5.2.13/ext\php_mcrypt1.dll'
I'd say there's some typo on your php.ini (the extra 1). Perhaps you're loading a different php.ini from what you expect (see the output of php.ini to make sure).
Other than that make sure that php_mcrypt.dll and PHP:
Were linked to the same VC runtime library (typically msvcrt.dll for VC6 or msvcrt90.dll for VC9) – use e.g. the dependency walker for this
Are both debug builds or both release builds
Both have ZTS enabled or ZTS disabled
For libraries that depend on further libraries (DLLs), make sure they are available (e.g. in the same directory as the extension)
PHP should give you meaning errors if any of the first three conditions above is not satisfied, but I wrote those anyway because I'm not sure for PHP 5.2.
From C:\xampp\php\php.exe I got
Unable to load dynamic library ''
C:\xampp\php\ext\php_.dll (The specified module could not be found.)
I solved by commenting out
C:\xampp\php\php.ini
;extension=
I had the same problem when I tried to use php with sql server, when I added the sqlsrv libraries ... it gave me the error, after several days of researching there, I understood that microsoft does not support x64 in this case so what I did was install laragon x86 and use the corresponding libraries. I hope it helps with something
Go to system env variable and set the php ext dir path as
C:\xampp\php\ext
basically it's finding the ext directory and then locating it's file but it's unable to find the files becuase php path is set as different.
I followed the manual, I mpved the php_mongo.dll into the PHP extension folder,
and added extension=php_mongo.dll to the php.ini file and it's given me an error when I try and you rockmango that "To make things right, you must install php_mongo module. Here for installation documents on PHP.net." but I have alread done this any solutions? I am running the lattest version of PHP and mongodb
Check php --ini shows the correct config file being used.
Check php -i (phpinfo) and make sure the module is actually loaded.
Double check you have the right flavour of the module for your version of PHP. (VC6, VC8, VC9, TS, NTS, etc.)
I got my mongo module (1.2.9) for PHP 5.4 32bit on windows from stealth35. It works like a charm.
Often there are multiple PHP locations with different php.ini files.
If you are worried about working in mod_php (through apache) or as a fastcgi then create a file with the following contents.
<?php phpinfo();
Then visit that file in a browser. It will have all the settings and modules listed that are currently being loaded. It will also tell you which php.ini file and modules directory being used.
Please make sure that the ini listed is the one you added mongo dll line.
I am just curious about the process of installing an extension because I am trying to install php's uploadprogress extension on Ubuntu. I have a default php installation in my usr/ directory, but I have a XAMPP server set up (separate php apache mysql package) in another location in /opt. This is the installation I use for testing.
When I use the command pecl install uploadprogress, the extension installs automatically to the /usr directory. As a test I took the uploadprogress.so file out of the /usr directory php location and put it in the opt location where my XAMPP installation is. I then modified the php.ini for my XAMPP installation and put the extension in. When I ran phpinfo() it showed uploadprogress as installed, however when uploading a file, the uploadprogress function returns null.
My question is, when a php extension is installed, what processes are done, and what files are created and modified? If I manually download the uploadprogress.tgz and manually compile, it still installs to the default directory of /usr/local/php5/ext and I figure there must be more done then just a .so file created in the extension directory. How can I change the location that the extension installs to? I want to have the extension available to my other XAMPP installation in /opt.
My question is, when a php extension is installed, what processes are done, and what files are created and modified?
That depends on the extension, but normally there is the building and compilation of the extension. Temporary files are created, the configuration could getting modified and the actual module file (.so/.dll) is getting written (at least).
Keep in mind that some modules require certain settings in php.ini before they work. If you have copied over only the .so file then you should copy over the relevant part of the php.ini as well.
How can I change the location that the extension installs to?
You normally compile it for the location you want to install it to. If the default location is not the location you want it to be, you can try to specify the output directory in the build process, and there is php-config.
You want to run configure --help to see what options it gives to you to compile the extension and to look for the install directory path option. Maybe this answer helps you with pecl How do you change the default Pear/PECL build folder from /var/tmp?. A .so file is a special standalone library. It's stripped from any linkage and is basically an object file.