The code suppose show the image like this below
however the result is this below
this is my code here
simplegraph.php
<?php
// set up image canvas
$height = 200;
$width = 200;
$im = imagecreatetruecolor(width, height)($width, $height);
$white = imagecolorallocate ($im, 255, 255, 255);
$blue = imagecolorallocate ($im, 0, 0, 255);
// draw on image
imagefill($im, 0, 0, $blue);
imageline($im, 0, 0, $width, $height, $white);
imagestring($im, 4, 50, 150, 'Sales', $white);
// output image
header('Content-type: image/png');
imagepng ($im);
// clean up
imagedestroy($im);
?>
here is all files in
htdocs
This is probably because of this statement:
$im = imagecreatetruecolor(width, height)($width, $height);
The above is incorrect syntax. Change this to:
$im = imagecreatetruecolor($width, $height);
The image will show after this, because PHP is assuming, that width and height are constants, but they do not exist and it will give out error, and after that the ($width, $height) part will cause the syntax error. But that is the part that you actually need.
Related
So I have a 3x3 pixel image using imagecreate. I want to scale up the image with imagescale while maintaining the look of a 3x3 grid of "pixels". However, the pixels on the right and bottom edge are not the same size.
Here is my code and output image:
<?php
$image = imagecreate(3, 3);
imagecolorallocate($image, 0, 0, 255);
$red = imagecolorallocate($image, 255, 0, 0);
imagesetpixel($image, 0, 0, $red);
imagesetpixel($image, 1, 1, $red);
imagesetpixel($image, 2, 2, $red);
imagepng(imagescale($image, 200, 200, IMG_NEAREST_NEIGHBOUR));
header("Content-Type: image/png");
This is my output:
Notice how the bottom-right pixel is cut off. I kept playing with the numbers for the new dimensions and arrived at 256x256 at which point the pixels are all the same size.
This is the output after using 256x256:
My question is: How can I derive the dimensions to use for the resized image with the effect I described?
Bonus question: Is an alternative method which will allow me to resize to an arbitrary size and keep the pixels approximately the same size?
I would use imagecopyresampled to achieve this.
http://php.net/manual/en/function.imagecopyresampled.php
<?php
$width = 3;
$height = 3;
$image = imagecreate($width, $height);
imagecolorallocate($image, 0, 0, 255);
$red = imagecolorallocate($image, 255, 0, 0);
imagesetpixel($image, 0, 0, $red);
imagesetpixel($image, 1, 1, $red);
imagesetpixel($image, 2, 2, $red);
$new_width = 200;
$new_height = 200;
$dst = imagecreatetruecolor($new_width, $new_height);
imagecopyresampled($dst, $image, 0, 0, 0, 0, $new_width, $new_height, $width, $height);
imagepng($dst);
header("Content-Type: image/png");
I want to save my pngs, but my code does not allow me to create new pngs or overwrite the existing ones. Ideally every time the page is loaded the image would be saved.
<?php
$width = 640;
$height = 480;
$font = 23;
$string = "This is my text";
$im = #imagecreatetruecolor($width, $height);
imagesavealpha($im, true);
imagealphablending($im, false);
$white = imagecolorallocatealpha($im, 255, 255, 255, 127);
imagefill($im, 0, 0, $white);
$lime = imagecolorallocate($im, 0, 0, 51);
imagettftext($im, $font, 0, 0, $font - 3, $lime, "./DroidSerif-Bold.ttf", $string);
$im = imagecreatefrompng("test.png");
imagedestroy($im);
?>
imagecreateFROMpng as it names indicates creates an image object by reading a .PNG file. In order to save the image as a PNG, you must use the imagepng function:
...
imagettftext($im, $font, 0, 0, $font - 3, $lime, "./DroidSerif-Bold.ttf", $string);
imagepng($im, "test.png");
imagedestroy($im);
I've tried a few times but I can't seem to get 2 centered lines of text at the bottom of this image on the transparent background
Any suggestions?
<?php
$filePath = "adopt.png"; //full path to your png, including filename and extension
$img = #imagecreatefrompng($filePath);
$width = imagesx($img);
$height = imagesy($img);
//create new image and fill with background color
$backgroundImg = #imagecreatetruecolor($width, $height);
imagecopy($backgroundImg, $img, 0, 0, 0, 0, 100, 130);
$color = imagecolorallocatealpha($backgroundImg, 0, 0, 0, 127); //fill transparent back
imagefill($backgroundImg, 0, 0, $color);
//save as png
header( "Content-type: image/png" );
imagepng( $backgroundImg );
imagedestroy( $backgroundImg );
?>
This process works. Without your code I can only regurgitate the example from the manual to you. http://php.net/manual/en/function.imagestring.php. But it works, I have used the imagestring function. It accepts co-ordinates for the text so I can not see why it would not work for you.
<?php
// Create a 100*30 image
$im = imagecreate(100, 30);
// White background and blue text
$bg = imagecolorallocate($im, 255, 255, 255);
$textcolor = imagecolorallocate($im, 0, 0, 255);
// Write the string at the top left
imagestring($im, 5, 0, 0, 'Hello world!', $textcolor);
// Output the image
header('Content-type: image/png');
imagepng($im);
imagedestroy($im);
?>
I have an image and I'm trying to watermark the image using text.
I have done with code part, but no image see been viewed with watermark text.
Here is the code below:
$imagetobewatermark="images/muggu.png";
list($width,$height)=getimagesize($imagetobewatermark);
$imagetobewatermark=imagecreatetruecolor($width,$height);
$mark=imagecreatefrompng($imagetobewatermark);
imagecopy($imagetobewatermark,$mark,0,0,0,0,$width,$height);
$wartermarktext="Muggu";
$font="../font/century gothic.ttf";
$fontsize="15";
$white = imagecolorallocate($imagetobewatermark, 255, 255, 255);
imagettftext($imagetobewatermark, $fontsize, 0, 20, 10, $white, $font, $watermarktext);
header("Content-type:image/png");
imagepng($imagetobewatermark);
imagedestroy($imagetobewatermark);
Tell me If I'm wrong.
Thank you.
One problem I can see straight away is that the $imagetobewatermark variable starts off as a string, then becomes a new blank image object (not an existing image), and when you subsequently create the mark image object, it's not going to work because $imagetobewatermark is no longer a string.
Try:
$imagetobewatermark=imagecreatefrompng("images/muggu.png");
$watermarktext="Muggu";
$font="../font/century gothic.ttf";
$fontsize="15";
$white = imagecolorallocate($imagetobewatermark, 255, 255, 255);
imagettftext($imagetobewatermark, $fontsize, 0, 20, 10, $white, $font, $watermarktext);
header("Content-type:image/png");
imagepng($imagetobewatermark);
imagedestroy($imagetobewatermark);
EDIT:
I failed to notice a typo in your text variable $wartermarktext, which should be $watermarktext.
Correct this and it should work.
You had some spellings wrong and did not use the ressource. Here corrected:
$imagetobewatermark = "muggu.png";
list ($width, $height) = getimagesize($imagetobewatermark);
$res = imagecreatetruecolor($width, $height);
$mark = imagecreatefrompng($imagetobewatermark);
//make sure here to use the ressource, not the filepath
imagecopy($res, $mark, 0, 0, 0, 0, $width, $height);
$watermarktext = "Muggu";
//$font = "../font/century gothic.ttf";
//I copied it to my local test folder
$font = "GOTHIC.TTF";
$fontsize = "15";
//make sure here to use the ressource, not the filepath
$white = imagecolorallocate($res, 255, 255, 255);
//make sure here to use the ressource, not the filepath
imagettftext($res, $fontsize, 0, 20, 10, $white, $font, $watermarktext);
header("Content-type:image/png");
//make sure here to use the ressource, not the filepath
imagepng($res);
//make sure here to use the ressource, not the filepath
imagedestroy($res);
you have to give Public/Absolute Path for Font arial.ttf.
Solution is tested in Laravel 5.8.
you can use this solution. here [ $SourceFile , $DestinationFile ] are Absolute Path of local directory. $imgUrl is HTTP based URL. Watermark will be placed at the top of the image.
function watermarkImage ($SourceFile, $WaterMarkText, $DestinationFile,$imgUrl) {
list($width, $height) = getimagesize($SourceFile);
$image_p = imagecreatetruecolor($width, $height);
$image = imagecreatefromjpeg($SourceFile);
imagecopyresampled($image_p, $image, 0, 0, 0, 0, $width, $height, $width, $height);
$black = imagecolorallocate($image_p, 255, 255, 255);
$font = public_path('fonts/arial.ttf');
$font_size = 8;
imagettftext($image_p, $font_size, 0, 10, 20, $black,$font , $WaterMarkText);
if ($DestinationFile <> '') {
imagejpeg ($image_p, $DestinationFile, 100);
} else {
header('Content-Type: image/jpeg');
imagejpeg($image_p, null, 100);
};
imagedestroy($image);
imagedestroy($image_p);
return $imgUrl;
}
Try this.
$imagetobewatermark = "images/muggu.png";
$watermarktext = "Muggu";
list($width, $height) = getimagesize($imagetobewatermark);
$image_p = imagecreatetruecolor($width, $height);
$image = imagecreatefrompng($imagetobewatermark);
imagecopyresampled($image_p, $image, 0, 0, 0, 0, $width, $height, $width, $height);
$font = "../font/century gothic.ttf";
$font_size = 15;
$white = imagecolorallocate($image_p, 255, 255, 255);
imagettftext($image_p, $font_size, 0, 20, 20, $white, $font, $watermarktext);
header("Content-Type: image/png");
imagepng($image_p, null, 0);
imagedestroy($image);
imagedestroy($image_p);
Try this code, It helps you to provide the watermark for the images.
<?php
header('Content-type: image/jpeg'); //SET THE FORMATE OF THE IMAGE
$jpg_image = imagecreatefromjpeg('images.jpg'); //GIVE LINK FOR SPECIFIED IMAGE
$color = imagecolorallocate($jpg_image, 500, 500, 500); //GIVE COLOR TO WATERMARK TEXT
$font_location = 'BROADW.TTF'; //WATERMARK FONT
$text = "http://www.sanwebtutorials.blogspot.in/"; //WATERMARK TEXT
$x=200; //X CO-ORDINATE
$y=800; //Y CO-ORDINATE
$size=21; //SIZE OF TEXT
imagettftext($jpg_image,$size, 0, $x, $y, $color, $font_location, $text); //PRINT TEXT ON IMAGE
imagejpeg($jpg_image); //SEND IMAGE TO BROWSER
imagedestroy($jpg_image); //DESTROY THE MEMORY
?>
What is the best way to replace transparent colors with white in gif and png images with php?
// get transparent color indexes
$trsp = ImageColorsForIndex($image, ImageColorTransparent($image));
// get transparent color set
$delete = imagecolorallocate($image, $trsp['red'], $trsp['green'], $trsp['blue']);
// replace
imagecolorset($image, $delete, 255, 255, 255);
does not working.
I don't really use GD all that much - I prefer ImageMagick. The following method works, but I'm not sure if it is the most efficient:
// Get the original image.
$src = imagecreatefrompng('trans.png');
// Get the width and height.
$width = imagesx($src);
$height = imagesy($src);
// Create a white background, the same size as the original.
$bg = imagecreatetruecolor($width, $height);
$white = imagecolorallocate($bg, 255, 255, 255);
imagefill($bg, 0, 0, $white);
// Merge the two images.
imagecopyresampled(
$bg, $src,
0, 0, 0, 0,
$width, $height,
$width, $height);
// Save the finished image.
imagepng($bg, 'merged.png', 0);