I am using Bitnami MAMP Stack 5.6.34. And installed it as root user so it loads at port 80. I am trying to install laravel 4.2 using composer and it shows that:
Mcrypt PHP extension required error.
and also while I try to use
php artisan
it does not work. Mcrypt is installed as it shows Enabled while I output phpinfo() function. But it still does not show up when I try using
php -m | grep mcrypt
I have modified php.ini file as follows:
mcrypt.algorithms_dir= /Applications/mampstack/common/lib/libmcrypt
mcrypt.modes_dir= /Applications/mampstack/common/lib/libmcrypt
But it does not work and still shows:
Mcrypt PHP extension required error.
But when I cd into mampstack and then use
sudo ./use_mampstack
then in the terminal I don't get any error while using composer install and can also use php artisan command as it finds that Mcrypt is enabled.
How can I get rid the Mcrypt error and load it with installed php
Bitnami Engineer here. I just installed Laravel in a fresh Bitnami installation in Mac OS X. These are the steps I followed
cd installdir/frameworks
curl -LO "https://github.com/laravel/laravel/archive/v4.2.11.zip"
unzip v4.2.11.zip
mv laravel-4.2.11 laravel
cd laravel
composer install
php artisan --version
Then, configure Apache using the similar config files (httpd-prefix.conf and httpd-app.conf) than the other frameworks or the ones at installdir/docs/demo. You will only need to modify the different paths in those files and include the httpd-prefix.conf file in the installdir/apache2/conf/bitnami/bitnami-apps-prefix.conf file. Restart Apache at the end to load this configuration.
I hope this helps
Related
I'm having trouble getting the IMAP PHP module working on my mac. Trying to run Laravel app using MAMP. When I run the command composer install I get this error message below. Seem that IMAP is not installed or enabled.
The requested PHP extension IMAP is missing from your system
I tried a few things to resolve this issue but kept running into a loop.
I ran => brew install kabel/php-ext/php#7.2-imap
I ran => composer require webklex/laravel-imap
php -i | grep imap
PHP 7.1.23 (cli)
Mojave 10.14.5
I'm using MAMP
In your php.ini you will find a line like this ;extension=imap
remove ;
extension=imap
save your php.ini, restart apache and try again
macOS Mojave 10.14.3
PHP 7.1.23
Prestashop 1.7.5.1
I tried to install PHP intl extension on my local server in order to use Prestashop.
I added extension=php_intl.so to etc/php.ini
When I try to install Prestashop I get Intl extension is not loaded.
$ php -m | grep intl
When I do $ php -m | grep intl, I get:
PHP Warning: PHP Startup: Unable to load dynamic library
'/usr/local/lib/php/pecl/20160303/php_intl.so' - d
lopen(/usr/local/lib/php/pecl/20160303/php_intl.so, 9): image not found in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library '/usr/local/lib/php/pecl/20160303/php_intl.so' - dlopen
(/usr/local/lib/php/pecl/20160303/php_intl.so, 9): image not found in Unknown on line 0
intl
It seems that the file php_intl.so doesn't exist.
$ sudo pecl install intl
I also tried $ sudo pecl install intland I get:
make: *** [php_intl.lo] Error 1
ERROR:make' failed`
$ curl -s http://php-osx.liip.ch/install.sh | bash -s 7.1
I also tried $ curl -s http://php-osx.liip.ch/install.sh | bash -s 7.1 and it doesn't create the intl.so file.
How can I solve this problem?
Brew's PHP 7.1, 7.2 and 7.3 all have INTL enabled by default.
Most probably, you're just using your Mac OS' bundles version of PHP.
Run
ls -l $(which php)
to find out where the current PHP binary is located and whether it is symlinked to a Brew installation or not. In my case, for example:
lrwxr-xr-x 1 27 May 23 16:30 /usr/local/bin/php -> ../Cellar/php/7.3.5/bin/php
Meaning that my php is linked to Brew's 7.3.5 version.
If you are NOT using Brew's PHP, you'll see something like
-rwxr-xr-x 1 11169664 Mar 21 07:09 /usr/bin/php
Installing PHP through Brew
Find out whether you've already installed PHP:
brew list | grep php
If there is any output, and your version of PHP is present, go to step 2, or use step 1 to update PHP to the latest version.
1. Install Homebrew's PHP
brew install php#7.3
(or 7.2, 7.1). If Brew complains about not being able to find a formula, you might have messed with taps. Instead of php#7.3, you could try to supply the full path to the current php formula:
brew install https://raw.githubusercontent.com/Homebrew/homebrew-core/master/Formula/php.rb
Still not working, check whether you are running a recent version of Homebrew brew --version.
Homebrew 2.1.3-31-geaf2370
Homebrew/homebrew-core (git revision fd1ef; last commit 2019-05-25)
Homebrew/homebrew-cask (git revision 16d50; last commit 2019-05-26)
2. Link Homebrew's PHP
Now, to have php 'in your path', there are two options.
a) Either homebrew's version must be linked from its install location (/usr/local/bin/Cellar/php....) to a directory in your path (e.g., /usr/local/bin). To do this, run:
brew link --force php#7.3
If you are not able to link, this is typically caused by set permissions or System Integrity Protection. In the first case, try sudo chown "$USER":admin /usr/local/bin/php.
b) Or, add the /usr/local/opt/php#7.3 directory (opt-prefix) to your $PATH variable. E.g., for Bash:
echo 'export PATH="/usr/local/opt/php#7.3/bin:/usr/local/opt/php#7.3/sbin:$PATH"' >> ~/.bash_profile
source ~/.bash_profile
3. Validate installation
ls -l $(which php)
should show that php is linked to a Homebrew PHP installation in /usr/local/bin/Cellar.
php -v
should show the recently installed version of PHP. Try to restart your terminal if that's not the case.
php -i | grep -i intl
should show some information about the current install of intl.
If you're using webservers and/or PHP FPM, this is the time to restart those services. (Or restart your system, if you don't know how to do that and cannot figure out).
Possible issues
If you still get warnings about missing extensions (Unable to load dynamic library, etc.), then your php.ini is messed up.
Find the current location of php's ini
$ php -i | grep \.ini
Configuration File (php.ini) Path => /usr/local/etc/php/7.3
Loaded Configuration File => /usr/local/etc/php/7.3/php.ini
Scan this dir for additional .ini files => /usr/local/etc/php/7.3/conf.d
Additional .ini files parsed => /usr/local/etc/php/7.3/conf.d/ext-opcache.ini
....
Edit /usr/local/etc/php/7.3/php.ini and find the offending extension load (e.g., extension="myext.so"). Comment out those that cannot be found.
Homebrew permissions
Some argue that it's a good idea to chown /usr/local.
sudo chown -R "$USER":admin /usr/local
This will make installing things here, by hand and through Homebrew, a lot easier, but also a bit less secure too, since non-root processes are now allowed to write here too.
Your web-application is using a different version of PHP.
Make sure that it doesn't... The configuration of this depends on the used webserver. A first step would be to output the current PHP configuration in your web-application with <?php phpinfo();.
This explains steps for Apache.
Another way to get a webserver + PHP stack running quicly is using Laravel Valet.
Installing additional extensions
To install additional PHP extensions, use PEAR.
pear -V
should output the current PEAR and PHP version.
PEAR Version: 1.10.9
PHP Version: 7.3.5
Zend Engine Version: 3.3.5
Now, to install an extension, for example, PHP's yaml extension:
pear install yaml
I have seen a lot of answers about this problem and anyone helped me, but the last (of course). This is for XAMPP´s use.
Xcode is needed.
Download the version of php you use in xampp from php.net.
Extract it and open the extracted folder in a terminal using cd.
Change to subfolder ext/intl.
Run these commands to build the extension:
/Applications/XAMPP/bin/phpize
./configure --enable-intl --with-php-config=/Applications/XAMPP/bin/php-config --with-icu-dir=/Applications/XAMPP/xamppfiles/
make
sudo make install (password required)
Delete all files you downloaded and also the extracted folders.
Add to php.ini file in xampp/etc folder line
extension="intl.so"
Original link: https://community.apachefriends.org/viewtopic.php?p=255061&sid=27afc55649dfe6ea7b0824cb0bb8486b
Since php 7 it's not necessary load the extension php_intl.so, what do you need to do?, edit your php.ini and delete or comment the line that is loading the extension php_intl.so, after this reload your apache and try again.
There might be an issue with brew
You could try to use this as mentioned there:
brew tap kyslik/homebrew-php
brew install kyslik/php/php71-intl
i tried all but intl not working in mac so please uninstall xampp and install mamp it will work
So, on Pecl Official site ( https://pecl.php.net/package/intl ), it's clear that Intl package is not maintained anymore and has been superseded. Since PHP 5.3.0 you don't need to use Pecl to install intl extension, it's bundled with PHP.
But, it's missing on native instalation of PHP 7.1.24 on Mac OS Mojave.
if you wanna use only native apache and php pre-installed instead of using homebrew, do this:
Download PHP 7.1 from php.net, install XCode Command Line Tools, ICU (http://site.icu-project.org/), Autoconf, reinstall the developer tools header files, and finally install Intl extension using phpize.
Important: you'll have to disable SIP.
Currently, I have cloned a project. I have PHP 7 on Ubuntu 14.04 64-bit.
The ImageMagick library is installed using the following command
sudo apt-get install php-imagick
But when I try image manipulation through this library, it throws the following exception
(1/1) NotSupportedException
ImageMagick module not available with this PHP installation.
How can I install this software with the latest PHP version?
Note: I am using Laravel 5.4 in this project.
You have to add extension=imagick.so in your php.ini file.
Location:
You can do some thing like this for the fastest way:
php -i | grep 'php.ini'
The result is like that:
Loaded Configuration File => /usr/local/lib/php.ini
Or call <?php phpinfo(); ?> from some php file to get this information :)
PS: Source
I had the same problem on my computer, and what solved it was:
Instead of installing sudo apt install php-imagick, I installed sudo apt install php7.4-imagick (or whatever version your PHP installation is).
This, in combination with Maraboc's answer did the trick for me.
I installed the php redis extension. But when I run the test code, I got the following error:
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626+lfs/redio.so' - /usr/lib/php5/20090626+lfs/redio.so: cannot open shared object file: No such file or directory in Unknown on line 0
PHP Fatal error: Class 'Redis' not found in /var/www/test/redisTest.php on line 2
My php version is 5.3.10, I installed the new version of phpredis.
May I get your help?
THANKS!
The install steps are:
git clone https://github.com/nicolasff/phpredis.git
cd phpredis
phpize
make
make install
Then add a config file in /etc/php5/fpm/confi.d to load redis.so
I use PHP 5.3 and installing PHP-Redis using below steps worked just fine for me:
Install pecl extensionsudo pecl install redis
In php.ini, you may need set extension_dir to correct value. (can be usr/lib64/php/modules as above command placed the redis.so in this directory). In my case, I didn't set this.
Add below line to php.ini:extension=redis.so
Restart Apache/PHP-FPM
To verify if you have got redis installed you can do this
php -m | grep redis
Create a file PHP with echo phpinfo(); in it and see if the module is showing up. If you do not see the module then it is not being loaded correctly.
In the PHP5.3 and Amazon Linux AMI (Same as Centos OS 5)
install libs
yum install php-pear php-devel make gcc wget
install redis
cd /opt/
mkdir /opt/redis
wget https://redis.googlecode.com/files/redis-2.6.14.tar.gz "or last version"
tar -zxvf redis-2.6.14.tar.gz
cd redis-2.6.14
make
make install
install php-redis by pecl
pecl install redis
configuration option "php_ini" is not set to php.ini location
You should add "extension=redis.so" to php.ini
reload the web service httpd
service httpd reload
verify that the extension has been installed
php -m
[PHP Modules]
bz2
...
**redis**
...
[Zend Modules]
Download the proper library file according to your server environment( ex. x86). also, check for your PHP is thread-safe or not and download the Redis library accordingly. then place the library file inside the extension folder. you need to mention the library inside your php.ini as given below.
extension=redis.dll
then restart the server once, and check it's working properly or not.
if you have command line PHP, you can check it in the command line PHP as,
php r("print_r(get_loaded_extensions());")
I'm having a terribly difficult time getting the command "pg_connect()" to work properly on my Mac. I'm currently writing a PHP script (to be executed from console) to read a PostgreSQL database and email a report.
I've gone into my php.ini file and added
extension=pgsql.so
But, I'm met with the following error.
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/extensions/no-debug-non-zts-20090626/php_pgsql.so' - dlopen(/usr/lib/php/extensions/no-debug-non-zts-20090626/php_pgsql.so, 9): image not found in Unknown on line 0
PHP Fatal error: Call to undefined function pg_connect() in... (blah file here)
When running phpinfo(), I see nothing about PostgreSQL, so what is my issue here?
The PHP version that comes bundled with OS X doesn't include PostgreSQL. You'll have to compile the extension yourself. Here are some instructions:
Find your version of PHP: php -v.
Download the version of PHP that matches yours: curl -O http://us.php.net/distributions/php-5.3.3.tar.gz. (This example downloads PHP 5.3.3 but this must match your version)
Extract the archive you downloaded: tar -xzvf php-5.3.3.tar.gz
Change to the PostgreSQL's extension directory: cd php-5.3.3/ext/pgsql/
Type phpize.
Type ./configure.
Type make.
Type sudo make install.
Add the extension to you php.ini file by adding extension=pgsql.so. (You may already have done this)
Restart Apache.
Update for OS X Mountain Lion
Apple has removed autoconf from the newer versions of XCode so the procedure above will fail at #5. To solve that problem:
Type /usr/bin/ruby -e "$(/usr/bin/curl -fksSL https://raw.github.com/mxcl/homebrew/master/Library/Contributions/install_homebrew.rb)".
Type sudo chown -R $USER /usr/local/Cellar.
Type brew update.
Type brew install autoconf.
That should install autoconf and allow you to install the module using the instructions above.
If you use home brew, you can solve this with a command as simple as:
brew install php55-pdo-pgsql
for other php version, search with:
brew search pgsql
This worked for me with OSX 10.9.4 «Mavericks»
Install sources
Download the PHP source code. Unlike on Mountain Lion, you don’t get any headers preinstalled to link against so need to put it in /usr/include/php. Mavericks ships with PHP 5.4.17, but the latest 5.4.x source from php.net should do:
tar -jxvf php-5.4.20.tar.bz2
sudo mkdir -p /usr/include
sudo mv php-5.4.20 /usr/include/php
Configure PHP
cd /usr/include/php
./configure --without-iconv
sudo cp /etc/php.ini.default /etc/php.ini
Building a module
I needed the pdo_pgsql module - the same pattern should apply to just about any module assuming you have the necessary dependencies installed:
cd ext/pdo_pgsql
In my case I had the following error:
Cannot find autoconf. Please check your autoconf installation and the
$PHP_AUTOCONF environment variable. Then, rerun this script. ERROR:
`phpize' failed
So I had to use this command:
brew install autoconf
Then:
phpize
After that I tried to do:
./configure
but I had the next problem:
checking for pg_config... not found configure: error: Cannot find
libpq-fe.h. Please specify correct PostgreSQL installation path
So the solution was to specify correct PostgreSQL installation path:
./configure --with-pdo-pgsql=/Library/PostgreSQL/9.3/
make
sudo make install
That copies pdo_pgsql.so to /usr/lib/php/extensions/no-debug-non-zts-20100525.
Then simply add
extension=pdo_pgsql.so to /etc/php.ini
Run php -m to confirm everything went to plan.
For those who installed php7/ngix/postgres with homebrew
You can install the PostgreSQL module with:
brew install php70-pdo-pgsql
After that, you have to restart the php service:
brew services restart php70
OS X El Capitan users can simply upgrade their version of PHP 5.6. This is a one liner that will do that.
curl -s http://php-osx.liip.ch/install.sh | bash -s 5.6
For php56 via brew:
brew install php56-pdo-pgsql
PostgreSQL by default is installed in a unusual place on MAC OS X:
/Library/PostgreSQL/9.3
Given the location above you can type this:
./configure --with-pgsql=/Library/PostgreSQL/9.3
I killed the whole day trying to make it work on El Capitan after I made an upgrade yesterday and it turned out that I forgot to modify httpd.conf and change the path from the default php module (version 5.5.27) to the one I installed (version 5.6.14). This should be done in httpd.conf by modifying your default LoadModule php5_module path to LoadModule php5_module /usr/local/opt/php56/libexec/apache2/libphp5.so.
Just decided to leave it here as the potential solution for those who upgrade their OS or just the PHP version and face the same problem.
For those of you having openssl error while make here is the solution
OSX uses openssl 0.98 while installer is searching for 1.0.0
refer this link for instructions
psycopg2 installation error - Library not loaded: libssl.dylib
I downloaded PostgreSQL for Mac, and used the stack builder after installation to standup the entire EnterpriseDB Apache/PHP stack end-to-end. I mention this as a possible time saving option, probably not ideal for all situations. Should work OK if the apache and postgres shipped with Mac OS X were never started.
To keep existing apache hosted applications (i.e. pre-PostgreSQL install legacy) stable, I would just install the newer EnterpriseDB apache on port 81 (stackbuilder will prompt for new port if legacy apache instance is already running). Then, use mod_proxy in httpd.conf for the apache running on port 80 to provide seamless user experience to applications hosted on PostgreSQL.