I'm facing weird problem which a bit complicated to understand. So the situation is that:
we have 2 installs (actually more, but not relevant for now)
both installs places on same server (apache + nginx)
we update our code and therefore deploy to staging - first install works great, second one has problem.
the code is 100% percent the same
there is no influence of other plugin (wordpress) on the specific part of code
The relevant code is the following:
$track = new trackClass();
$track->store_parameters();
$parameters = unserialize($track->parameters);
class trackClass // this class sits on different file
{
public $parameters;
public function __construct() {
...
}
method...
method...
method ..
public function store_parameters()
{
...
}
}
Before we modify our code, the function store_parameters was private, now its public.
So when on the second install the code is running its raise an error that the store_paramters() function is private and not accessible (remind you that it happens only on the second install).
I tried another thing get_class_methods($track) and the response was all the methods except the store_parameters(). Again - weird.
Next step, put wp_die('test') in the top of the file of the class. Refreshing the page and all as usual (the file is definitely loaded). If I try to access the admin (wp-admin) the changes make difference - the page is killed, blank screen and 'test' on it.
Next step, remove this file completely from the server. Refreshing the page and nothing happen. Their is ajax request from the class file which run as usual, like the file is exists and everything is ok. Again, going to the admin page and the error is raised (require_once ... not found).
Its doesn't seems like its code or development problem. The code is same. I'm afraid that its something on the server side / environment (apache, nginx) but unfortunately I've no access to the linux, I only can chat with the support of the hosting company.
They are insists that is code problem. No matter the tests I wrote above.
What can cause this kind of problem? I'm losing my mind here with no lead, its like the file is stuck somewhere.
I'm having a multiplayer server that's using PHPSockets, and thus is written entirely in PHP.
Currently, whenever I'm making any changes to the PHP server-script I have to kill the script and then start it over again. This means that any users online is disconnected (normally not a problem because there aren't so many at the moment).
Now I am rewriting the server-script to use custom PHP classes and sorten things up a little bit (you don't want to know how nasty it looks today). Today I was thinking: "Shouldn't it be possible to make changes to the php source without having to restart the whole script?".
For example, I'm planning on having a main.php file that is including user.php which contains the class MyUser and game.php which contains the class MyGame. Now let's say that I would like to make a change to user.php and "reload" the server so that the changes to user.php goes into effect, without disconnecting any online users?
I tried to find other questions that answered this, the closest I got is this question: Modifying a running script and having it reload without killing it (php) , which however doesn't seem to solve the disconnection of online users.
UPDATE
My own solutions to this were:
At special occations, include the file external.php, which can access a few variables and use them however it'd like. When doing this, I had to make sure that there were no errors in the code as the whole server would crash if I tried accessing a method that did not exist.
Rewrite the whole thing to Java, which gave me the possibility of adding a plugin system using dynamic class reloading. Works like a charm. Bye bye PHP.
Shouldn't it be possible to make changes to the php source without having to restart the whole script?
[...]
I'm planning on having a main.php file that is including user.php
which contains the class MyUser
In your case, you can't. Classes can only be defined once within a running script. You would need to restart the script to have those classes redefined.
I am not too familiar with PHP but I would assume that a process is created to run the script, in doing so it copies the instructions needed to run the program and begins execution on the CPU, during this, if you were to "update" the instructions, you'd need to kill the process ultimate and restart it. Includes are a fancy way of linking your classes and files together but ultimately the processor will have that information separate from where the file of them are stored and it is ultimately different until you restart the process.
I do not know of any system in which you can create code and actively edit it and see the changes while that code is being run. Most active programs require restart to reload new source code.
Runkit will allow you to add, remove, and redefine methods (among other things) at runtime. While you cannot change the defined properties of a class or its existing instances, it would allow you to change the behavior of those objects.
I don't recommend this as a permanent solution, but it might be useful during development. Eventually you'll want to store the game state to files, a database, Memcache, etc.
How about storing your User object into APC cache while your main script loads from the cache and checks every so often for new opcode.
To include a function in the cache, you must include the SuperClosure Class. An example would be:
if (!apc_exists('area')) {
// simple closure
// calculates area given length and width
$area = new SuperClosure(
function($length, $width) {
return $length * $width;
}
);
apc_store('area', $area);
echo 'Added closure to cache.';
} else {
$func = apc_fetch('area');
echo 'Retrieved closure from cache. ';
echo 'The area of a 6x5 polygon is: ' . $func(6,5);
}
See here for a tutorial on APC.
Simple solution use $MyUser instead of MyUser
require MyUserV1.php;
$MyUser = 'MyUserV1';
$oldUser = new $MyUser('your name');
//Some time after
require MyUserV2.php;
$MyUser = 'MyUserV2';
$newUser = new $MyUser('your name');
Every declared class stay in memory but become unused when the last MyUserV1 logout
you can make them inherit from an abstract class MyUser for using is_a
You cannot include again a file with the same class, but you can do so with an array. You can also convert from array to class, if you really need to do so. This only applies to data, though, not to behavior (methods).
I don't know much about these things with the games on PC but you can try to get all the variables from your database for the user and then update the text fields or buttons using those variables
In web is using AJAX (change data without refreshing the page).Isn't one for programming?
I have found that one common reason for the error is an exception being thrown from within an exception handler. I'm quite sure this doesn't happen in the application I'm trying to debug... But I've put all the initialization processing lines at the top of index.php in a try/catch.*
It can apparently also happen because some things cannot be serialized to be stored in a session. At most this application stores arrays into the session (quite a bit), but I'm confident that it doesn't store anything too out of the ordinary in it.
Someone commented that it happened to them because their primary key needed to be CHAR(32) instead of INT(11). The PK's in this app are all INTs.
Other suggestions are that it could be a problem with PHP 5.3.3 fixed in 5.3.6, full disk, and a need to typecast a SimpleXML value. We do happen to be running PHP 5.3.3, but upgrading would have to be a last resort in this case. It hasn't always been doing this.
UPDATE/NOTE: I actually can't reproduce the error myself, only see it happening in the logs, see below paragraph for where I believe the error is happening...
* From the error logs, it seems likely that at least one place it is happening is index.php. I am deducing this only because it is indicated in some entries by a referring URL. The try/catch code is currently only around the "top" initialization portion of the script, below that is mostly the HTML output. There is some PHP code in the output (pretty straightforward stuff though), so I may need to test that. Here is the catch part, which is not producing any output in the logs:
} catch (Exception $e) {
error_log(get_class($e)." thrown. Message: ".$e->getMessage(). " in " . $e->getFile() . " on line ".$e->getLine());
error_log('Exception trace stack: ' . print_r($e->getTrace(),1));
}
Would really appreciate any tips on this!
EDIT: PHP is running as an Apache module (Server API: Apache 2.0 Handler). I don't think there are any PHP accelerators in use, but it could just be that I don't know how to tell. None of the ones listed on Wikipedia are in phpinfo().
As far as I can tell the MPM is prefork. This is the first I'd ever looked into the MPM:
# ./httpd -l
Compiled in modules:
core.c
prefork.c
http_core.c
mod_so.c
The problem
In short you have a exception thrown somewhere, you have no idea where and up until now you could not reproduce the error: It only happens for some people, but not for you. You know that it happens for other people, because you see that in the error logs.
Reproduce the problem
Since you have already eliminated the common reasons you will need to reproduce the error. If you know which parameter will cause the error it should be easy to locate the error.
Most likely it is enough if you know all the POST/GET parameters.
If you can't reproduce with just these, you need to know additional request headers. Such as user agent, accept-encoding,...
If you still can't reproduce, then it becomes very difficult: The error may depend on a state (a session), the current time, the source ip address or the like.
The custom log method
Let's start simple: To get all parameters you can write in the very beginning of the affected php file something like:
file_put_contents("/path/to/some/custom_error_log", date()."\n".print_r(get_defined_vars(), true), FILE_APPEND | LOCK_EX);
Don't forget that the custom_error_log file must be writable to your php application. Then, when the error occurs in the error log, find the corresponding lines in your custom_error_log file. Hopefully there are not to many requests per second so that you can still identify the request. Maybe some additional parameters in the error log like source ip can help you identify the request (if your error log shows that).
From that data, reconstruct a request with the same POST/GET parameters.
The tcpdump method
The next option that is very simple as well, but requires you to have root-access on your target machine is to install tcpflow. Then create a folder, cd into that folder and simply execute (as root) tcpflow "port 80". The option (port 80) is a pcap filter expression. To see all you can do with that, see man pcap-filter. There is a lot what these filter expressions can do.
Now tcpflow will record all tcp connections on port 80, reconstruct the full data exchange by combining the packages belonging to one connection and dump this data to a file, creating two new files per connection, one for incoming data and one for outgoing data. Now find the files for a connection that caused an error, again based on the timestamp in your error log and by the last modified timestamp of the files. Then you get the full http request headers. You can now reconstruct the HTTP request completely, including setting the same accept-encoding, user-agent, etc. You can even pipe the request directly into netcat, replaying the exact request. Beware though that some arguments like a sessionid might be in your way. If php discovers that a session is expired you may just get a redirect to a login or something else that is unexpected. You may need to exchange things like the session id.
Mocking more things
If none of this helps and you can't reproduce the error on your machine, then you can try to mock everything that is hard to mock. For example the source ip adress. This might make some stunts necessary, but it is possible: You can connect to your server using ssh with the "-w" option, creating a tunnel interface. Then assign the offending ip adress to your own machine and set routes (route add host ) rules to use the tunnel for the specific ip. If you can cable the two computers directly together then you can even do it without the tunnel.
Don't foget to mock the session which should be esiest. You can read all session variables using the method with print_r(get_defined_vars()). Then you need to create a session with exactly the same variables.
Ask the user
Another option would be actually ask the user what he was doing. Maybe you can follow the same steps as he and can reproduce.
If none of this helps
If none of that helps... well... Then it gets seriously difficult. The IP-thing is already highly unlikely. It could be a GEO-IP library that causes the error on IPs from a specific region, but these are all rather unlikely things. If none of the above helped you to reproduce the problem, then you probably just did not find the correct request in all the data generated by the custom_log_file-call / tcpflow. Try to increase your chances by getting a more accurate timestamp. You can use microtime() in php as a replacement for date(). Check your webserver, if you can get something more accurate than seconds in your error log. Write your own implementation of "tail", that gives you a more accurate timestamp,... Reduce the load on the system, so that you don't have to choose from that much data (try another time of day, load of users to different servers,...)
circle the problem once you can reproduce
Now once you can reproduce it should be a walk in the park to find the actual cause. You can find the parameter that causes the error by trial and error or by comparing it to other requests that caused an error, too, looking for similarities. And then you can see what this parameter does, which libraries access it, etc. You can disable every component one by one that uses the parameter until you can't reproduce anymore. Then you got your component and can dive into the problem deeper.
Tell us what you found. I am curious ;-).
I had such an error, too. Found out that I returned a sql object in my session class (that was used by the session_handler) instead of returning nothing or at least not the sql object. First look into your _write and _read methods, if you too return some incorrect stuff.
Notice: ... Unknown on line 0 - How to find correct line, it's NOT "line 0"
I realize this question has already been answered, but I'll add this since it may help someone:
I managed to (unintentionally) produce errors without a stack frame from a function which used its own error handler to maintain control of execution while calling a potentially "dangerous" function, like this:
// Assume the function my_error_handler() has been defined to convert any
// PHP Errors, Warnings, or Notices into Exceptions.
function foo() {
// maintain control if danger() crashes outright:
set_error_handler('my_error_handler');
try {
// Do some stuff.
$r = danger();
} catch (Exception $e) {
$r = 'Bad Stuff, Man!';
}
restore error_handler();
return $r;
}
The "untraceable failure" would happen at the end of the program execution if the logic in "Do some stuff" returned from foo() directly, bypassing the call to restore_error_handler(). What I took away from the experience is this:
PHP maintains a stack of error handlers which gets deeper/taller with each call to set_error_handler().
Bad Stuff can happen if you push error handlers onto the stack and don't clean up after yourself before the program exits "normally".
This was a tough bug to isolate - I basically narrowed the problem down to the above function and then stared at it until my eyes bled.
So how would I have tracked this down, knowing what I know now? Since I don't know of any way to inspect the PHP error handler "stack" directly, I'm thinking it might make sense to use a Singleton object to encapsulate all set/restore operations for PHP error handlers. At least then it would be possible to inspect the state of the Singleton before exiting the program normally, and if "dangling" error handlers are detected to generate a sensible failure/warning message before PHP freaks out.
Instead of wrapping code in a try/catch block, what happens when you register an exception handler? Clearly your try/catch block is not catching the exception, thus resulting in the errors logged to Apache. By registering a handler, you can be sure any uncaught exception is handled.
Also, if you're using namespaces in your application, make sure you write \Exception in your catch block (or include the Exception class via a use statement).
This may be a little late but one issue I discovered when moving a site from a local to a remote server. I was using Concrete5 cms had developed my site locally(windows 8 in xampp) and then uploaded to a remote server running Cent 0S
Windows mysql by default is case insensitive and created a lower case database. Once this was uploaded to the remote server I received the "Exception thrown without a stack frame in Unknown on line 0?"
I then corrected the database tables case and my site started working again.
For us, this error was due to inadvertently serializing SimpleXML objects.
If you are using SimpleXML objects with 5.3.3, make sure you are are casting the node values to whatever you need (e.g. string) if you are serializing the values in the session.
Before:
$token = $response->Token->Value;
/* token saved in session, results in line 0 error */
After:
$token = (string) $response->Token->Value;
/* token saved in session, no error */
I had completely the same error. A very spacial case: if you connect an unnamed function (closure) hook to an object instance's hook point. After that you try to serialize this object.
I had the same error after filling the Illuminate Eloquent model's Fillable property incorrectly. Note the last 3 elements of the array, one is missing a coma.
protected $fillable = [
'budget',
'routestatus' ,
'userroutenumber'
'totalmovingseconds',
'totalidleseconds'
];
I had the same error, it appeared upgrading server from centos 5 to centos 6 and downgrading PHP from 5.4 to 5.3. Actual issue was PHP apc, not configured properly. Check your APC. I was using Symfony2, so you might find some help at Symfony Unable to allocate memory for pool
one simple way to produce this error is an old server with register_globals = On. then you only need two lines of code:
<?php
$_SESSION["my_var"] = "string";
$my_var = new MyClass(); //could be any class, i guess
?>
as soon as you reload this page once, you'll get the Exception thrown without a stack frame in Unknown on line 0 - error. seems like there is a conflict between the instance of the class and the (session) variable.
at least this is how i got this annoying error which is so hard to debug.
This problem occurred for me when I changed the namespace on a few Symfony bundles. Deleting the files in the the symfony cache directory fixed the issue.
Likely you have a corrupt/inconsistent table in the database. Try dumping the database. If you get a error that's the time. Repair that table and the issue should go away.
It is for this reason why clean install works. The clean install is just that clean.
mysqlcheck should work but if it does not show and issue still do above.
When using Magentos log facility Mage::log() it sometimes causes a white screen. No error messages are outputted either to the screen or any of the log files (var/log/system.log, var/log/exception.log )
This seems to happen only when I'm trying to log a very large object. for example when I'm trying this
Mage::log(Mage::helper('catalog/category')->getStoreCategories());
inside a block controller it causes a white screen.
the same happens when I'm trying to log the current product in app/design/frontend/enterprise/default/template/catalog/product/view/media.phtml
using
Mage::log($_product);
Usually Mage::log() works fine and writes everything to the system.log file.
I was wondering if this has happened to anybody else or if anybody has an idea about why this is happening?
Mage::log works a lot like print_r, private and protected values are printed too which includes extensive resource details. You can avoid these by using the purpose made Varien_Object::debug method.
Mage::log($_product->debug());
debug is also preferred because it detects recursion which not all versions of PHP do.
I guess it happens to everyone.
Try not to log large objects.
In case you need I would advice you to use die.
for example like this
$object = ...;
die($object);
or
die('pre html tag'.print_r($object,true).'pre html tag');
Hi Guys I am getting a blank page and also redirect to assigned role page after clicking Add New User --> System --> Permissions --> User --> Add New User.I checked log, report,exception error file, didn't find any error even it enabled. I cannot add new user.Can someone please point me in the right direction, that would be great.
Thanks in advance.
The error has been fixed by changing content of core function getRowUrl in app\code\core\Mage\Adminhtml\Block\Widget\Grid.php
The core function :
public function getRowUrl($item)
{
$res = parent::getRowUrl($item);
return ($res ? $res : '#');
}
Replaced with:
public function getRowUrl($item)
{
return $this->getUrl('*/*/edit', array('id' => $item->getId()));
}
It worked great.
This is a type of question I have asked before and it was shut down for being to vague.
I know how frustrated you feel since it is impossible to find a solution on the net.
My experience has since taught me that if I get a blank page, it probably means my working environment, webserver, IDE etc has just got too heavy.
My advice:
Restart your apache server
check Firefox is not eating too much memory in the Task Manager
Likewise with your IDE.
Also watch out for the resources being used by the JAVA JAR used by your IDE
Turn off XDebug since it has memory leaks.
Setup a cron to restart apache every hour.
Dont forget to clear the cache too!