I just compiled PHP 7.3.0 alpha1 from the source, OS X, and then I installed Apache 2.2.4, but my PHP files aren't executed - instead I just see the code written in the file.
Like this:
I looked in httpd.conf, and I wasn't loading libphp7.so, but the module was nowhere to be found in the PHP source folder, I tried using libphp7.so from another PHP installation but phpinfo(); would just show an old PHP version.
How do I get the libphp7.so after compiling PHP from source?
You can get the libphp7.so file when source compiling using apxs2.
You'll need to make sure you have the devel packages for aspx, mysql-devel package for mysql_config, and httpd-devel. For CentOS/RHEL you can just run the following
yum install httpd-devel
yum install libxml2-devel
yum install mysql-devel
For the configure I ran it with mysqlnd but if you want to run it with something else, you can change the with-mysqli/with-pdo-mysql. I also enabled cli but for the .so you'll need aspx2.
./configure --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --enable-cli --with-apxs2
You can also set a prefix when compiling and it should be installed under [PREFIX PATH]/libs/libphp7.so.
Related
macOS Mojave 10.14.3
PHP 7.1.23
Prestashop 1.7.5.1
I tried to install PHP intl extension on my local server in order to use Prestashop.
I added extension=php_intl.so to etc/php.ini
When I try to install Prestashop I get Intl extension is not loaded.
$ php -m | grep intl
When I do $ php -m | grep intl, I get:
PHP Warning: PHP Startup: Unable to load dynamic library
'/usr/local/lib/php/pecl/20160303/php_intl.so' - d
lopen(/usr/local/lib/php/pecl/20160303/php_intl.so, 9): image not found in Unknown on line 0
Warning: PHP Startup: Unable to load dynamic library '/usr/local/lib/php/pecl/20160303/php_intl.so' - dlopen
(/usr/local/lib/php/pecl/20160303/php_intl.so, 9): image not found in Unknown on line 0
intl
It seems that the file php_intl.so doesn't exist.
$ sudo pecl install intl
I also tried $ sudo pecl install intland I get:
make: *** [php_intl.lo] Error 1
ERROR:make' failed`
$ curl -s http://php-osx.liip.ch/install.sh | bash -s 7.1
I also tried $ curl -s http://php-osx.liip.ch/install.sh | bash -s 7.1 and it doesn't create the intl.so file.
How can I solve this problem?
Brew's PHP 7.1, 7.2 and 7.3 all have INTL enabled by default.
Most probably, you're just using your Mac OS' bundles version of PHP.
Run
ls -l $(which php)
to find out where the current PHP binary is located and whether it is symlinked to a Brew installation or not. In my case, for example:
lrwxr-xr-x 1 27 May 23 16:30 /usr/local/bin/php -> ../Cellar/php/7.3.5/bin/php
Meaning that my php is linked to Brew's 7.3.5 version.
If you are NOT using Brew's PHP, you'll see something like
-rwxr-xr-x 1 11169664 Mar 21 07:09 /usr/bin/php
Installing PHP through Brew
Find out whether you've already installed PHP:
brew list | grep php
If there is any output, and your version of PHP is present, go to step 2, or use step 1 to update PHP to the latest version.
1. Install Homebrew's PHP
brew install php#7.3
(or 7.2, 7.1). If Brew complains about not being able to find a formula, you might have messed with taps. Instead of php#7.3, you could try to supply the full path to the current php formula:
brew install https://raw.githubusercontent.com/Homebrew/homebrew-core/master/Formula/php.rb
Still not working, check whether you are running a recent version of Homebrew brew --version.
Homebrew 2.1.3-31-geaf2370
Homebrew/homebrew-core (git revision fd1ef; last commit 2019-05-25)
Homebrew/homebrew-cask (git revision 16d50; last commit 2019-05-26)
2. Link Homebrew's PHP
Now, to have php 'in your path', there are two options.
a) Either homebrew's version must be linked from its install location (/usr/local/bin/Cellar/php....) to a directory in your path (e.g., /usr/local/bin). To do this, run:
brew link --force php#7.3
If you are not able to link, this is typically caused by set permissions or System Integrity Protection. In the first case, try sudo chown "$USER":admin /usr/local/bin/php.
b) Or, add the /usr/local/opt/php#7.3 directory (opt-prefix) to your $PATH variable. E.g., for Bash:
echo 'export PATH="/usr/local/opt/php#7.3/bin:/usr/local/opt/php#7.3/sbin:$PATH"' >> ~/.bash_profile
source ~/.bash_profile
3. Validate installation
ls -l $(which php)
should show that php is linked to a Homebrew PHP installation in /usr/local/bin/Cellar.
php -v
should show the recently installed version of PHP. Try to restart your terminal if that's not the case.
php -i | grep -i intl
should show some information about the current install of intl.
If you're using webservers and/or PHP FPM, this is the time to restart those services. (Or restart your system, if you don't know how to do that and cannot figure out).
Possible issues
If you still get warnings about missing extensions (Unable to load dynamic library, etc.), then your php.ini is messed up.
Find the current location of php's ini
$ php -i | grep \.ini
Configuration File (php.ini) Path => /usr/local/etc/php/7.3
Loaded Configuration File => /usr/local/etc/php/7.3/php.ini
Scan this dir for additional .ini files => /usr/local/etc/php/7.3/conf.d
Additional .ini files parsed => /usr/local/etc/php/7.3/conf.d/ext-opcache.ini
....
Edit /usr/local/etc/php/7.3/php.ini and find the offending extension load (e.g., extension="myext.so"). Comment out those that cannot be found.
Homebrew permissions
Some argue that it's a good idea to chown /usr/local.
sudo chown -R "$USER":admin /usr/local
This will make installing things here, by hand and through Homebrew, a lot easier, but also a bit less secure too, since non-root processes are now allowed to write here too.
Your web-application is using a different version of PHP.
Make sure that it doesn't... The configuration of this depends on the used webserver. A first step would be to output the current PHP configuration in your web-application with <?php phpinfo();.
This explains steps for Apache.
Another way to get a webserver + PHP stack running quicly is using Laravel Valet.
Installing additional extensions
To install additional PHP extensions, use PEAR.
pear -V
should output the current PEAR and PHP version.
PEAR Version: 1.10.9
PHP Version: 7.3.5
Zend Engine Version: 3.3.5
Now, to install an extension, for example, PHP's yaml extension:
pear install yaml
I have seen a lot of answers about this problem and anyone helped me, but the last (of course). This is for XAMPP´s use.
Xcode is needed.
Download the version of php you use in xampp from php.net.
Extract it and open the extracted folder in a terminal using cd.
Change to subfolder ext/intl.
Run these commands to build the extension:
/Applications/XAMPP/bin/phpize
./configure --enable-intl --with-php-config=/Applications/XAMPP/bin/php-config --with-icu-dir=/Applications/XAMPP/xamppfiles/
make
sudo make install (password required)
Delete all files you downloaded and also the extracted folders.
Add to php.ini file in xampp/etc folder line
extension="intl.so"
Original link: https://community.apachefriends.org/viewtopic.php?p=255061&sid=27afc55649dfe6ea7b0824cb0bb8486b
Since php 7 it's not necessary load the extension php_intl.so, what do you need to do?, edit your php.ini and delete or comment the line that is loading the extension php_intl.so, after this reload your apache and try again.
There might be an issue with brew
You could try to use this as mentioned there:
brew tap kyslik/homebrew-php
brew install kyslik/php/php71-intl
i tried all but intl not working in mac so please uninstall xampp and install mamp it will work
So, on Pecl Official site ( https://pecl.php.net/package/intl ), it's clear that Intl package is not maintained anymore and has been superseded. Since PHP 5.3.0 you don't need to use Pecl to install intl extension, it's bundled with PHP.
But, it's missing on native instalation of PHP 7.1.24 on Mac OS Mojave.
if you wanna use only native apache and php pre-installed instead of using homebrew, do this:
Download PHP 7.1 from php.net, install XCode Command Line Tools, ICU (http://site.icu-project.org/), Autoconf, reinstall the developer tools header files, and finally install Intl extension using phpize.
Important: you'll have to disable SIP.
I need to add curl to my PHP, I read multiple articles which recommended just sudo apt-get install php5-curl
But when I try it I get error as below
Error:
The following packages have unmet dependencies:
dropbox : Depends: python-gtk2 (>= 2.12) but it is not going to be
installed
php5-curl : Depends: php5-common (= 5.4.45-1~dotdeb+6.1) but
5.4.31-1~dotdeb.0 is to be installed
So I go a bit deeper and try to install it manualy, so I basicly download curl from curl website with: wget http://curl.haxx.se/download/curl-7.36.0.tar.gz
and then just unpack it and just ./configure and sudo make and after that sudo make install
Dispite the fact i didnt get any error It also didnt help.
From error I see that I have older version of my PHP than one in repository but I really have no clue what I can do now.
Is here anyone who can help me?
If you're stuck with that version of PHP, you can build the cURL extension yourself and then activate it with PHP. Normally, cURL is compiled into the PHP binary but you can also run it as a dynamic extension.
When you downloaded, compiled, and installed cURL, this installed the curl program and libraries but has nothing to do with PHP.
You can follow these steps to build a cURL PHP extension for your system:
Go to http://php.net/releases and download the source code for the version of PHP you are currently running
Extract to a temporary location
From the command line, cd to php-5.x.x/ext/curl
Run the following commands:
phpize
./configure --with-curl=/usr/local (/usr/local should be correct, but you can try leaving it blank, or specify the --prefix you used when you installed cURL.
make && make install
After make install runs, it should say something like:
Installing shared extensions: /usr/lib/php5/20121212/
This is where it will place curl.so
Now, edit your php.ini file that PHP uses and add:
extension=curl.so
Restart your webserver &/or PHP, check that cURL is loaded.
Note: If you don't have the phpize (it should have come with PHP) you might need to just build PHP to a temporary location and copy phpize to /usr/bin so you have it.
Hope that helps.
You need to update your PHP version and then install curl.
Do apt-get update to get the latest definitions, then apt-get upgrade to upgrade all packages, then apt-get install php5-curl.
Can anyone provide me a guide to install old version of php 5.3.26 on centos 6.5?
I have installed httpd through yum install -y httpd.
Go there :
https://github.com/php/php-src/tree/PHP-5.3.26
Download as zip.
Unzip on your server.
Now, configure your PHP. This is where you customize your PHP
with various options, like which extensions will be enabled. Do a
./configure --help for a list of available options. In our example
we'll do a simple configure with Apache 1 and MySQL support. Your
path to apxs may differ from our example.
./configure --with-mysql --with-apxs=/www/bin/apxs
And compile : make && make install
There are plenty of informations about this in the INSTALL file in the folder you unzipped
I have began installing pecl on MAMP. I have added the correct php version to the path and when which php it says /Applications/MAMP/... which is correct.
I have downloaded the Server Components and libraries moved them to a new folder in my php and run the ./configure everything seems to run ok and looked through all the checks being performed while installing and unpacking.
It gets to the last line and says;
configure: error: Please specify the install prefix of iconv with --with-iconv=<DIR>
Where should I set the <DIR> for the iconv?
Just make another folder and point it at that?
I am only trying to get the mongo pecl installed.
The information I have followed is here http://www.lullabot.com/blog/article/installing-php-pear-and-pecl-extensions-mamp-mac-os-x-107-lion
Wait wait wait wait. Why are you rebuilding your PHP installation to install the MongoDB driver?
You don't have to do that.
Just run e.g.:
/Applications/MAMP/bin/php/php7.1.1/bin/pecl install mongo
Assuming thats the full path to the pecl command part of your MAMP installation.
You might need to replace /php7.1.1/ with your current and active MAMP php version.
Working on this right now and found a workaround to just disable iconv with ./configure --without-iconv which not the best solution of course, but works for me.
Edit: Downloaded libiconv-1.14 package, and after running ./configure , make, make install, PHP configure runs fine.
This did it for me:
$ ./configure --with-iconv=/usr/lib/
First needed to install libxml2 and libxslt via homebrew though:
$ brew install libxml2
$ brew install libxslt
How do I install mbstring with PHP on CentOS 6.2
I've tried:
$ sudo yum install php-mbstring
Loaded plugins: fastestmirror, security
Loading mirror speeds from cached hostfile
* base: mirror.net.cen.ct.gov
* extras: centos.aol.com
* updates: mirrors.seas.harvard.edu
Setting up Install Process
No package php-mbstring available.
Error: Nothing to do
But no packages were found?
do the following:
sudo nano /etc/yum.repos.d/CentOS-Base.repo
under the section updates, comment out the mirrorlist line (put a # in front of the line), then on a new line write:
baseurl=http://centos.intergenia.de/$releasever/updates/$basearch/
now try:
yum install php-mbstring
(afterwards you'll probably want to uncomment the mirrorlist and comment out the baseurl)
If you have cPanel hosting you can use Easy Apache to do this through shell. These are the steps.
Type the Easy Apache PathType the path for Easy Apache
root#vps#### [~]# /scripts/easyapache
Do not say yes to the "cPanel update available".
Continue through the screens with defaults till you get to the "Exhaustive options list".
Page down till you see the Mbstring extension listed and select it.
Continue through the Steps and Save the Apache PHP build.
Apache and PHP will now rebuild to include the mbstring extension. Wait for the process to finish ~10 to 30 minutes. Once the process is finished you should see the Mbstring extension in the phpinfo now.
For more detailed steps see the article
Installing the mbstring extension with Easy Apache
Please check your /etc/yum.conf file, maybe it is exclude php packages.
You should remove php* from this line so you can download php-* packages:
exclude= courier* dovecot* exim* filesystem httpd* mod_ssl* mydns* php*
It's seems your server having some scripts like cPanel
*Make sure you update your linux box first
yum update
In case someone still has this problem, this is a valid solution:
centos-release : rpm -q centos-release
Centos 6.*
wget http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
rpm -ivh epel-release-6-8.noarch.rpm
wget http://rpms.famillecollet.com/enterprise/remi-release-6.rpm
rpm -Uvh remi-release-6*.rpm
Centos 5.*
wget http://ftp.jaist.ac.jp/pub/Linux/Fedora/epel/5/x86_64/epel-release-5-4.noarch.rpm
rpm -ivh epel-release-5-4.noarch.rpm
wget http://rpms.famillecollet.com/enterprise/remi-release-5.rpm
rpm -Uvh remi-release-5*.rpm
Then just do this to update:
yum --enablerepo=remi upgrade php-mbstring
Or this to install:
yum --enablerepo=remi install php-mbstring
Find out php version - php -v
Search for php extensions available - yum search php-
Install using - yum install ea-php56-php-mbstring.x86_64
Then httpd -k restart
Package name - ea-php-php-mbstring.x86_64
yum install php-mbstring (as per http://php.net/manual/en/mbstring.installation.php)
I think you have to install the EPEL repository http://fedoraproject.org/wiki/EPEL
None of above works for godaddy server centOS 6, apache 2.4, php 5.6
Instead, you should
Install the mbstring PHP Extension with EasyApache
check if you already have it by, putty or ssh
php -m | grep mbstring
[if nothing, means missing mbstring]
Now you need to goto godaddy your account page,
click manager server,
open whm ----- search for apache,
open "easy apache 4"(my case)
Now you need customize currently installed packages,
by
click "customize" button on top line next to "currently installed package..."
search mbstring,
click on/off toggle next to it.
click next, next, .... privision..done.
Now you should have mbstring
by check again at putty(ssh)
php -m | grep mbstring [should see mbstring]
or you can find mbstring at phpinfo() page
As yum install php-mbstring then httpd -k restart didn't do it for me, I think these options should be compiled, as documented here:
Now, configure and build PHP. This is where you customize PHP with
various options, like which extensions will be enabled. Run
./configure --help for a list of available options. In our example
we'll do a simple configure with Apache 2 and MySQL support.
If you built Apache from source, as described above, the below example
will match your path for apxs, but if you installed Apache some other
way, you'll need to adjust the path to apxs accordingly. Note that
some distros may rename apxs to apxs2.
cd ../php-NN
./configure --with-apxs2=/usr/local/apache2/bin/apxs --with-mysql --enable-mbstring
make
make install
If you decide to change your configure options after installation,
you'll need to re-run the configure, make, and make install steps. You
only need to restart apache for the new module to take effect. A
recompile of Apache is not needed.
Note that unless told otherwise, 'make install' will also install
PEAR, various PHP tools such as phpize, install the PHP CLI, and more.
Though this page says it's optional:
--enable-mbstring
Allows multibyte character string support. This is optional, as slower custom code will be used if not available.
I have experienced the same issue before. In my case, I needed to install php-mbstring extension on GoDaddy VPS server. None of above solutions did work for me.
What I've found is to install PHP extensions using WHM (Web Hosting Manager) of GoDaddy. Anyone who use GoDaddy VPS server can access this page with the following address.
http://{Your_Server_IP_Address}:2087
On this page, you can easily find Easy Apache software that can help you to install/upgrade php components and extensions. You can select currently installed profile and customize and then provision the profile. Everything with Easy Apache is explanatory.
I remember that I did very similar things for HostGator server, but I don't remember how actually I did for profile update.
Edit:
When you have got the server which supports Web Hosting Manager, then you can add/update/remove php extensions on WHM. On godaddy servers, it's even recommended to update PHP ini settings on WHM.
sudo yum install php<version>w-mbstring
ex.
sudo yum install php56w-mbstring
If none of the above help you out, and you have the option, try obtaining one of the rpm files eg:
wget http://rpms.famillecollet.com/enterprise/6/remi/x86_64/php-mbstring-5.4.45-2.el6.remi.x86_64.rpm
then using rpm, install it ignoring the depenecies like so:
rpm -i --nodeps php-mbstring-5.4.45-2.el6.remi.x86_64.rpm
Hope that helps out.