good day!
I installed arcanist with:
git clone https://github.com/phacility/libphutil.git
git clone https://github.com/phacility/arcanist.git
but when I'm doing arc help, I get error like this:
$ arc help
PHP CONFIGURATION ERRORS
You need to install the cURL PHP extension, maybe with 'apt-get
install php5-curl' or 'yum install php53-curl' or something similar.
but I can run this: curl " XXXX ", it's ok. and curl_init() also is run . with phpinfo()， I can see curl enable. But I don't know why get this error when I'm doing arc command.
Can you help me? Thanks!
and system information:
my php version : 5.6.3
vagrant box on mac
You need to make sure curl extension is enabled for CLI SAPI (likely in /etc/php5/cli/conf.d/ folder). CLI and web (mod-php or fpm) configurations are separate, so it very well may happen that extension is enabled when PHP is used through web server, but disabled when you run in as a CLI executable.
Related
Basically my question says it all.
I'd like to be able to inspect the state of the variables of my script, set breakpoints etcétera, without the need to install Nginx, apache or PHP-FPM?
Is this doable, if not what would be my options?
Ok so parting from this article I've managed to use xdebug.
I installed PHP 5.5 on Mac OS X 10.10 using homebrew
Install PHP if it has not been installed, make sure to install it with the xdebug extension;
in my case I used$ brew install php55-xdebug or if you have pecl and php already installed use $ pecl install xdebug.
You can check if the extension is installed by executing $ php -m | grep xdebug.
If you use VIM as your "IDE", I'd recommend to install the vim pathogen plugin, then install the xdebugger vim plugin; which I've modified to be pathogen compatible.
$ cd ~/.vim/bundle && git clone https://github.com/Triztian/xdebugger.git
Next we have to enable the xdebugger extension; to do so first you need to find out which php.ini file is being loaded, you can check that by running $ php -i | grep "File => /". After you've found the correct init file you must add the follwing lines at the end:
xdebug.remote_enable=On
xdebug.remote_autostart=On
If using PHP's built-in development server, you can use the -c argument to specify a php.ini file.
Now, start the php development server (in my case $ php -S localhost:8080 -c /usr/local/etc/php/5.5/php.ini) and open VIM. After VIM is open press <f5> so that the xdebugger starts listening for a connection; on your browser navigate to localhost:8080/index.php (or any php script) so that it triggers the xdebugger connection if everything has been setup correctly.
You should no be in a debugging session, look at the plugin's readme to see how it works.
You can use php built in web server. It was mean't to be used for development.
I'll make this quick.
I installed Oracle 11g (with appropriate database, users, etc), Apache 2.4.6, and PHP 5.5.4 on a Fedora 19 system.
I wanted to connect PHP to Oracle. What I really wanted to do was to download MDB2_Driver_oci8, which I thought would be easy, but before I can do such a thing, PHP needs to have that plug-in enabled, so here's what I did:
Tried to install oci8 via the following: pecl install oci8
When that didn't exactly work the first few times, I figured out I, for some reason, needed "Development tools" - via yum groupinstall "Development Tools"
Then I figured out later that PHP actually doesn't do oci8 - it's PHP Devel. So, I had to install that too, via yum install php-devel.
And then, I finally got to install oci8. It asked for the Oracle Directory, and that was that. But it said the following:
Configuration option 'php_ini' is not set to php.ini location
You should add 'extensions=oci8.so' to php.ini
First, I did a locate oci8.so - found it in /usr/lib64/php/modules/
Second, I added what it told me to, to the php.ini file.
Third, I checked the usual php_info() test page - no mention of OCI8. Uh-oh.
Fourth, running both php -i and php -m listed oci8 as one of the modules. Weird.
In desperation, I went ahead and downloaded the MDB2_Driver_oci8. Maybe that will fix things. Nope.
When I loaded my PHP Webpage, it returned the following:
Error message: extension oci8 is not compiled into PHP
As well as: MDB2 error: not found
Strange. And then I decided to check the error logs:
PHP Startup - unable to load dynamic library '/usr/lib64/php/modules/oci8.so' - libclntsh.so.11.1: cannot open shared object file: No such file or directory in Unknown on line 0
And now I'm stuck. I tried going into the php.ini, and found that the extension_dir was commented out. I put it back in, which only seemed to break stuff.
Things of note:
I followed this (link) guide on how to configure PHP and install oci8.
./configure --with-oci8 doesn't work. Fedora says no such directory.
As both the webpage files and the actual server reside on the same PC, I did not install the Oracle Client files.
The extension_dir is commented out by default in the php.ini.
This is just one of my problems in a long line of problems concerning the replication of an already existing and working, but dying, setup. It seems whenever I want to solve a problem, I have to do X first. And by doing X, I uncover another problem, which I have to solve by doing Y, which has its own problems, etc, etc.
Any help would be much appreciated. Thanks.
I know this question is a bit old - but I'm writing this here incase others come looking for the solution.
PHP Extensions Directory
To get your PHP extensions directory, run this command
php-config --extension-dir
ORACLE configuration
When you run the config command for oracle, you need to provide it with your Oracle Home directory (this assumes you have installed ORACLE XE):
./configure -with-oci8=shared,$ORACLE_HOME/xe
SELinux policy
You need to adapt your SELinux policy to support what you are trying to achieve. Disabling it completely is not recommended.
On your Fedora system, try running:
which audit2allow
If you receive an error that indicates it cannot find audit2allow then you need to install this package:
yum install policycoreutils-python
Once you have this package, you can pipe your audit log files into audit2allow to have it create your policy file:
grep httpd /var/log/audit/audit.log | audit2allow -m httpd > http.te
This will create the file http.te that is human readable for you to review what the policy additions are that it will make to your SELinux configuration. If you are OK with the modifications, then run these commands (note the capital M in the following command vs. the lowercase m previously)
grep httpd /var/log/audit/audit.log | audit2allow -M httpd
semodule -i httpd.pp
This may take a few seconds to run - you can verify the policy has been installed by running:
semodule -l | grep httpd
You will need to restart httpd so that it can try to load the oci8.so plugin
service httpd restart
HTH
After reading a lot on the internet, I found this page, that indicates I should disable SELinux, and reboot.
That did the trick.
I'm trying to set up a cronjob which requires curl, and I'm calling it directly from crontab with
* * * * * /usr/bin/php myurl/my_cron.php
The problem is, it looks like the curl module isn't installed for my phpcli.
It works just fine when I hit the url from my browser, but when I run
php -q myfile.php
from the command line, it returns
PHP Fatal error: Call to undefined function curl_init() in my_cron.php on line 20
When I run php -m the curl module does not show up. However when I go to the browser and dump the php_info(), the module shows up and says its correctly installed.
The other kicker is i've been trying to install curl with apt-get onto the server (Ubuntu 12.04 php 5.4), it seems to take down my PHP as it begins to simply attempt to download the index.php file wherever I try to browse to.
Here are the attempts I've made to install curl that have taken down PHP:
sudo apt-get install php-curl
sudo apt-get install curl libcurl3 libcurl3-dev php5-curl
After each of these I restarted the apache2 server and still no dice, it attempted to download the file instead of opening the page.
How can I install php5-curl to just the cli, so that my server can run it and I don't have to go through a browser?
The other possibility is I could run the cronjobs through wget from the crontab file, but I've heard that's not the best option and potentially unreliable.
Any help is much appreciated. Thanks!
I had the same issue. But, finally I solved it by running the following command.
sudo apt-get install php7.0-curl
Restart the server after installing. This answer may not be useful for the user who asked because he asked it two months ago. But, this may be useful for the users who reading this in the future.
Here's how I've fixed this on ubuntu 14.04 when curl was working in php files run through apache, but not when called from the cli.
ssh to your server and cd to /
find / -name 'curl.so'
Run the above find command to locate where the curl binary is hanging out at. If you can't find the file, you might need to install curl and run the find command again.
apt-get install php5-curl
You'll now want to edit the php.ini being used for php files run from the cli (it's different than the one used by apache), and is likely at /etc/php5/cli/php.ini
nano /etc/php5/cli/php.ini
You can also run
php -i | grep 'php.ini'
To get the file path, just to be sure.
In your php.ini file search for [curl] by pressing ctrl + w
You'll now want to add the extension to the file and it should look something like the following, though your path to the curl.so file and such might be a little different:
[curl]
; A default value for the CURLOPT_CAINFO option. This is required to be an
; absolute path.
;curl.cainfo =
extension=/usr/lib/php5/20131226/curl.so
After doing the above, I was able to use curl in php scripts run from the cli.
first find the version of your php cli by:
php -v
for example if it was version 7 then:
sudo apt-cache search php7
this will give you the proper module names for your current version:
php7.0-curl - CURL module for PHP <---- the name of curl module.
php7.0-dev - Files for PHP7.0 module development
php7.0-gd - GD module for PHP
php7.0-gmp - GMP module for PHP
php7.0-json - JSON module for PHP
php7.0-ldap - LDAP module for PHP
php7.0-mysql - MySQL module for PHP
.
.
so on
so to add curl support, copy the name of curl module from the list above then do the following:
sudo apt-get install php7.0-curl
If you are using the command-line interface ('cli') for php5, instead of
php -q myfile.php
please use:
php5 -q myfile.php
php5-curl seems to enable the curl module for the cli php5 and not php and both (can) load different configurations and modules.
I use ubuntu 14.04 and php 5.3. After upgrading to php 5.6.29 I also has problem with php curl. My directory structure after updating to php 5.6.29:
/etc/php5 - old version (5.3)
/etc/php/5.6 - new version
The next command
sudo apt-get install php5-curl
didn't help (looks like it connects to old php version - 5.3).
I have found next article: php 5.6 for magento
It advice to use command
apt-get -y install php5.6-curl
instead of
apt-get -y install php5-curl
It works for me!
The first thing you should always check is your php.ini file. You should have a php.ini file in your web root. Curl is installed by default on most web servers; I haven't found a web server with PHP that hasn't already had curl installed. Its not always enabled, though.
Check your your php.ini file and search for php_curl.dll, it should look like this:
;extension=php_curl.dll
Just remove the semicolon (;) from before "extension" and save the file. It should work right away. According to your phpinfo.php its already installed, so it likely just needs to be enabled.
A similar question can be found here if you're interested: Call to undefined function curl_init()
In case someone reached here to find windows version of running curl.
Open php.ini and remove the ; before extension=php_curl.dll around line 656.
I am pretty much sure what Apache loads is C:\wamp\bin\apache\Apache2.2.17\bin\php.ini therefore you may find curl working from browser.
But when php is run from command line then it may show unknown function curl_init();
Run php -r "echo php_ini_loaded_file();" in the command line to see which ini file is being loaded.
Usually its found inside C:\wamp\bin\php\php5.3.5\php.ini its a different file from what Apache is using. So open it and then remove the ; before extension=php_curl.dll around line 656.
Hope it helps someone.
After I tried for hours to find the good path for PHP-CLI, i finally found it. But my proud was soon gone again.
Still i got the following error:
The following requirements were not met. As a result video uploads have been disabled.
Unable to locate path to PHP-CLI
I have tried much different paths
bin/php
usr/local/lib
usr/local/lib/php
usr/local/bin/php (this is the good one I thought).
Still getting the same error as above. Whats happening? My server is not running in Safe Mode and my exec() are enabled via the php.ini file.
Please help me..
Edit:
Paul
Q: Have you tried any "fully qualified paths", e.g. "/bin/php" (not
just "bin/php")?
A: I have tried both solutions, no result.
Q: Are you sure php-cli is installed on your system (it's typically a
seperate package from the Apache PHP plug-in)? EXAMPLE: apt-get
install php5-common libapache2-mod-php5 php5-cli.
A: I tried this in the SSH of my server, its a CentOS server so he didn't found the comment
#Peter:
If you installed PHP through your OS package manager, the path would
probably be /usr/bin/php, which appears to be the only one you didn't
try
I tried that one now, i didn't help, still the same error:
Edit2
#Dev-null
You have found and what? Just knowing where >is located will not fix it, have you changed some >code or environment variable PATH to make it
A: its an input field where i need to put the path in. I haven't changed any code, because PHP version 5.3.17 (CLI) installed on my CentOS server. So no need to change some code just for the path, right?
Edit
My PHP info, PHP 5.3.17 (CLI) Check the image below..
Edit
When I do rpm -q php-cli I get PHP-CLI not installed and when I want to install i get No package php-cli available. See image below.
Edit
Result of /bin/php -v below.
CentOS ships the PHP command-line interpreter in the php-cli package. So you first need to verify whether it's installed or not:
rpm -q php-cli
If installed, you can list all its files:
rpm -ql php-cli
... and filter out potential binaries:
rpm -ql php-cli | grep /bin/
You can get further details in the Using RPM chapter of the deployment guide.
If the package is not installed:
yum install php-cli
More info at Installing New Software with yum.
All this answer assumes that nobody broke the package system by installing software manually. If that happened, there's no way to tell what changes were made to the system.
Edit #1: I've just seen your last edit where php-cli is up and running. Then, if you want to know the path you just need to type this:
which php
Edit #2: You seem to have up to 4 binaries called php in your path. I still think that the proper reliable way to find the php-cli binary is running rpm -ql php-cli but given that php finds it on the path I'm pretty sure that it's located at /bin/php and you can verify it by running:
/bin/php -v
Run that exact command—don't remove any slashes or append -cli.
If your script, whatever it looks like, cannot find it, it's either doing it wrong or it's missing the appropriate permissions.
try the following to find it:
sudo find / -name php-cli
You most likely want php instead of php-cli though.
None of the solutions on this page found the installed versions of PHP that were present in my own elusive search for php-cli. The solution for me was to use the following command:
locate bin/php
This listed all php versions and I could then replace php with, for example:
/usr/bin/php71-cli
To access the command line interface version of php rather than the default cgi one. I then alias my instructions like so:
alias composer='/usr/bin/php71-cli bin/composer.phar'
I installed "drush" for my drupal website.
when I tried to run "drush":
[root#server /]# drush
/usr/share/drush/drush.launcher: line 132: /usr/bin/php-cli: No such file or directory
[root#server /]#
php-cli was not in my default directory /usr/bin
Solution was to copy my "php"-file to "php-cli" file (no rename!!, just copy)
[root#server /]# cp php php-cli
weird, but still working!
I am trying to use the new facebook api and it requires libcurl PHP. I used
sudo apt-get install php5-curl
sudo apachectl -k restart
And it didn't work. I get the same error and the phpinfo() page says nothing about libcurl.
The source of this problem is probably that I built some of the tools from source (apache2, php), but then I got bored so installed a lot of the extensions with the package manager. But I'm not exactly how to go about diagnosing the point of failure.
The apt-get install for curl definitely worked, and can be found in
/usr/lib/php5/20060613/curl.so
I think a lot of my confusion stems from not knowing which files go where, and what purpose they have. Any help would be appreciated, and please tell me if I need to provide more information.
edit:
The specific error I get is:
Exception: Facebook needs the CURL PHP extension.
from line
if (!function_exists('curl_init')) {
throw new Exception('Facebook needs the CURL PHP extension.');
}
Ubuntu: 9.10
PHP: 5.2.13
Loaded Configuration File: /etc/php5/apache2/php.ini
In general it's a bad idea to mix and match software from your distribution's package manager with stuff you've built yourself. The package manager will not know anything about the stuff you've built yourself and so can get confused.
Not only that but who's to say the stuff from the package manager is even binary compatible with the stuff you've built yourself? If you build it all yourself then at least you know it will all be compatible.
Sounds to me like you should uninstall the extensions and build them yourself. If you can't or don't want to do that then go back and install apache and friends through your package manager but I would recommend having patience and going for the former option.
Answer of Questions
What version of Ubuntu?
What version of PHP?
How is Apache and PHP set up?
What ini files does phpinfo() say is parsed? (should be near the top)
Perhaps apt failed to properly modify your php.ini file to load the curl extension?
Check out your php.ini and see if you have line like:
extension=curl.so
or maybe:
extension=/usr/lib/php5/20060613/curl.so
To check if php-curl is installed please follow these steps:
Create a file in your web server (in Ubuntu it would be in /var/www folder), name it info.php
Open that file and type this command:
<?php phpinfo(); ?>
Save that file
Open your favorite browser and open that file (ex: http://localhost/info.php)
Now you will see the Information about your PHP installation
Search for Curl, and if you cannot find it, it mean your php doesn’t have curl installed.
To install php-curl please follow these steps:
Open your terminal and type this command:
sudo apt-get install curl libcurl3 libcurl3-dev php5-curl php5-mcrypt
After it finish open php.ini file (mine is at /etc/php5/apache2/php.ini ) and add this command: extension=curl.so
Save the file and restart apache with this command:
/etc/init.d/apache2 restart
Check the PHP information page again, you will find PHP-CURL installed
That’s it
Source: http://www.ivankristianto.com/os/ubuntu/howto-install-curl-in-php-apache/379/