We have setup a Wordpress Website on IIS 10 which was working fine. But suddenly it stops working and i got this error
"FASTCGI process has failed frequently recently. Try the request again
in a while"
Restarting IIS fixed this problem.
Anybody tell me why this issue has occurred and how we can fix this ?
Thanks
Open command prompt as administrator and navigate to the php-cgi.exe
folder.
Execute any PHP file from your application to know the exact error. In my case, I created a simple phpinfo.php page and executed
following command.
C:\Program Files (x86)\PHP\v7.4.5>php-cgi.exe E:\Websites\mysite\phpinfo.php
It showed me the exact error saying 'vcruntime140.dll is not
compatible with this PHP build' & I have updated to 'Microsoft Visual C++ Redistributable for Visual Studio 2019'. You can download it from here.
Once you identified and resolved the error(point 3), you need to restart IIS server and run your website. It will work as expected.
If you're running PHP 8 turn track_errors Off in php.ini . Track_errors have been deprecated since 7.2 and can cause a fatal error in IIS
Finally, i found the solution to the issue, It is due to the low value given to "Rapid Fails PerMinute" - see above image posted by German Martin.
From Microsoft's website the default value for "Rapid Fails PerMinute" is 90 but i reduced it 10 and then the error "FASTCGI process has failed frequently recently...." started showing up.
Once i set it back to the default value of 90 , the error stopped. This is what worked for me, in my case.
You need to maximize "Instance MaxRequest" at FASTCGI Configuration. Just clic en IIS root -> FastCGI Settings, select you php-cgi.exe for WP and clic Edit. Then increise Instance MaxRequests
[IIS FastCGI Settings]
Related
I am getting a blank screen and nothing in the error logs for a php program I am trying to get up and running (it happens to be yourls). What do I need to do to get error logging enabled or to otherwise get an indicate of why the page is not loading (I know there are multiple postings on this but none of the fixes suggested in this posts seems to generate any output and don't seem to work for this specific implementation)?
I'm running php from this install: php-8.0.0-nts-Win32-vs16-x64.zip
I'm running Apache HTTPD from this install: httpd-2.4.46-o111i-x64-vc15.zip
Turns out this was a behavior of the yourls software I was trying to run. It had a flag that turned error logging/messaging off AND it was not compatable with php 8. I switched to php 7 and switched to the php.ini-development config (by renaming it to php.ini) and I am now seeing error messages (the driver for the database is missing).
I'm just beginning with Symfony 3 but I'm stuck with a built-in server issue.
I am using wamp64 v3.0.6 with PHP 7.1.9 (and PHPStorm as IDE) on Windows 7.
I ran the built-in server once and got a response from localhost:8000 correctly but then, just like [this issue][1], I get the following error message when I try to access localhost:8000 on subsequent tries :
Warning: Unknown: failed to open stream: No such file or directory in Unknown on line 0
Fatal error: Unknown: Failed opening required'C:\wamp64\www\projectname\vendor\symfony\symfony\src\Symfony\Bundle\WebServerBundle/Resources/router.php' (include_path='.;C:\php\pear') in Unknown on line 0
I've tried uninstalling symfony, wamp64 and PHPstorm to try to identify the problem.
After reinstalling wamp (without running the server) and symfony I've noticed the following :
When I run the built-in server for the first time and immediately access localhost:8000, it works fine. But then the server stops without my pressing CTRL-C. When I restart the server and try to access localhost:8000 I now get said error message.
I've tried creating a another project using PHP 7.0.23 with the same results : once the server crashes, I can no longer load my project.
I'm hoping someone can provide an answer as regarding this issue. I've spent the past few hours searching the web for an answer and have found none.
Thanks in advance.
Credit goes to Baig for this answer :
The source of the issue lies with the antivirus. To solve this, I've excluded the wamp directory (where symfony and my projects are also stored) from my antivirus and, voila, no more server crashes, everything works fine.
I can execute my php scrape file by typing in the address bar:
domain.com/scrape.php
However, I try to use cron job on my shared server on host gator by this command:
/usr/bin/php-cli public_html/scrape.php
I got this error message:
Fatal error: Call to undefined function GuzzleHttp\Handler\curl_reset() in /home4/username/public_html/vendor/guzzlehttp/guzzle/src/Handler/CurlFactory.php on line 78
I already update my php version to stable 5.6 or even 5.7 version also same error. I think that it should not be php version error because I still can execute the file from browser right ?
Also I cannot reboot server Apache because hostgator support said they cannot reboot it until the server is totally down...
Any help please ! Thank you !
I ran into this problem last week on my own server. As it turned out, my browser was looking at one installation of PHP and cron was looking at a 2nd installation of PHP. One way to check is to run a PHP script through your browser that executes phpinfo(). That will tell you what the browser is running. Have cron do the same and save the results. Compare the two and make sure they're pointing to the same installation of PHP. Don't just check versions. Check install paths and loaded modules. Cheers.
Have been using MAMP Pro for a fair while - version 3 primarily, upgraded to 4 a while ago.
I haven't had any unusual issues at all, but today the Apache service failed to start, telling me to check the error logs. The logs were blank unfortunately... I've made no system configuration changes, no changes to MAMP/MAMP Pro. Shut down my system yesterday, started today, it no longer works...
I've tried numerous suggestions found via Stack Overflow and Google without any success.
Even after completely uninstalling and re-installing MAMP Pro I am unable to get the service to start.
Nothing appears in the logs...
When starting it manually on the command line it comes up with a PHP related error:
$ Applications/MAMP/bin/apache2/bin/apachectl start
httpd: Syntax error on line 135 of /Applications/MAMP/conf/apache/httpd.conf: Cannot load /Applications/MAMP/bin/php/php5.2.17/modules/libphp5.so into server: dlopen(/Applications/MAMP/bin/php/php5.2.17/modules/libphp5.so, 10): image not found
The confusing thing is that I don't have PHP 5.2.17 specified anywhere, at all - according to MAMP Pro it should be using PHP 7.0.12.
If I add PHP 5.2.17 to MAMP using the appropriate MAMP Pro dialogs, Apache still fails to start via the MAMP Pro interface. I can now start it manually from the command line however, but none of my virtual hosts/etc seem to be loaded.
apachectl -V tells me it's using /Applications/MAMP/conf/apache/httpd.conf, but there is nothing in that file that has any reference to any of the configs generated in /Library/Application Support/appsolute/MAMP PRO/conf
It also looks like hosts entries aren't added to /etc/hosts.
Even if I tell /Applications/MAMP/conf/apache/httpd.conf to do nothing but include /Library/Application Support/appsolute/MAMP PRO/conf/httpd.conf (and manually add entries to /etc/hosts) it still doesn't seem to work at all...
I and my colleagues are at a complete loss, especially given it was working yesterday...
Has anyone had any issues like this?
I managed to fix the similar issue you had.
My Apache server was working fine and then following updating to 4.0.6 I experienced similar issues.
There were 2 things I did to fix the issue. I was getting the same error where it couldn't find a php file in 5.2.17. After fixing that by adding 5.2.17 to MAMP I experienced an apache error regarding user permissions.
(22)Invalid argument: getpwuid: couldn't determine user name from uid 4294967295, you probably need to modify the User directive
File > Edit Template > Revert ALL Templates to Default Settings.
Save & restarted the servers and all worked finally and all my hosts had retained as well.
I had previously entered a custom line in my httpd.conf file that for countless versions had copied across fine however it looks like the folder structure had changed and so couldn't locate it causing the unusual error about User permissions. I have since re-entered the custom line with the correct structure and all working fine again.
Hope this helps.
For some unknown reason I cannot start WAMP server - The icon stays yellow no matter what:
Checked port 80, and it's not used.
No Skype, no Firewall.
Tried MANY solutions I suggested here in stackoverflow - absolutely nothing.
Tried to uninstall and reinstall - it worked for 10 minutes, then it didn't work again.
The only thing I'm changing is to include Virtual Hosts under httpd.conf. Checked every solution I could find on the net - nothing is working for me.
Maybe, just maybe it's because I previously installed PHP 5.5 apart from WAMP? If I go to PHP > PHP Extensions > then I can see there's a problem in php_opcache and php_enchant. When I click on them I get an error message that says: Could not execute menu item (internal error). [Execption] Could not perform service action: the service has not been started. The PHP Version I installed is 5.5.15. The PHP WAMP is 5.5.12... I don't have a clue how to uninstall PHP, and I couldn't find anything about that on the net.
PHP Error log says: PHP Warning: PHP Startup: Unable to load dynamic library 'c:/wamp/bin/php/php5.5.12/ext/php_intl.dll' - %1 is not a valid Win32 application. in Unknown on line 0
EDIT - It seems like the cause for the problem is me trying to include Virtual Host via httpd.conf file. When I excluded, like in default, WAMP is online again. Any suggestion of how to include virtual host and still get WAMP get online?
It looks like you're running on a corrupt install have you tried reinstalling the software?
Alternatively i would recommend using Xampp which basically offers the same service as Wampp only with a bit more ease of access (also allowing for Mecury mail service and an FTP server for remote access).
The problem with php_intl can be corrected easily, see this answer
In order to find out what Apache is complaining about with the Virtual Hosts definition look at the Windows Event Log or, launch a command window and
cd \wamp\bin\apache\apachex.y.z\bin
httpd -t
This should give you filename and line number where your errors are.
Try changing that port number anyway. Mine stays yellow if the port number is set to 80, even though WAMP says it's not being used by any other program.