I have been reading documentation and queries for several hours and I think I have a correct POST made with cURL.
It communicates correctly, because I receive the auth key and OK is validated, but then it doesn't receive any parameters from the post. I think some parameter must be missing, but I don't see anything in the documentation.
My code:
$data = "email=name#xxxx.com&template=3";
$url = "https://xxxx.net/xxx/aaa/bbb";
$ch = curl_init();
curl_setopt($ch, CURLOPT_HTTPHEADER, array(
"keyname: keyvalue"
));
curl_setopt($ch, CURLOPT_URL, $url);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_POSTFIELDS, $data );
curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false);
$result = curl_exec($ch);
Does anyone know if I should stick some more configuration??
I'm trying to submit a POST request with JSON data to an api endpoint. The endpoint requires a querystring passing the api credentials, but also requires the JSON data to be POSTed.
When I try to do this with PHP cURL as shown below, the querystring is apparently removed - thus the api is rejecting the request due to missing api key.
I can do this easily with Postman when testing access to the api endpoint.
How can I make the cURL request include both the querystring AND the JSON POST body?
Example code:
// $data is previously defined as an array of parameters and values.
$url = "https://api.endpoint.url?api_key=1234567890";
$ch = curl_init();
$json = json_encode($data);
curl_setopt($ch,CURLOPT_URL, $url);
curl_setopt($ch,CURLOPT_POST, true);
curl_setopt($ch,CURLOPT_POSTFIELDS, $json);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HTTPHEADER, [
'Content-Type: application/json',
'Content-Length: ' . strlen($json)
]
//execute post
$result = curl_exec($ch);
//close connection
curl_close($ch);
You are doing almost right.
Sometimes you need to relax SSL verification.
Otherwise, update php ca bundle:
https://docs.bolt.cm/3.7/howto/curl-ca-certificates
Add the following:
$headers = array(
"Content-type: application/json;charset=UTF-8",
"Accept-Encoding: gzip,deflate",
"Content-length: ".strlen($json),
);
$ch = curl_init();
curl_setopt($ch, CURLOPT_URL, $url);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_TIMEOUT, 300);
curl_setopt($ch, CURLOPT_POST, true);
curl_setopt($ch, CURLOPT_POSTFIELDS, $json);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_ENCODING, "identity, deflate, gzip");
curl_setopt($ch, CURLOPT_HTTPAUTH, CURLAUTH_ANY);
curl_setopt($ch, CURLINFO_HEADER_OUT, true);
curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false);
curl_setopt($ch, CURLOPT_SSL_VERIFYHOST, false);
$result = curl_exec($ch);
$httpcode = curl_getinfo($ch, CURLINFO_HTTP_CODE);
curl_close($ch);
Sometimes you need to change encoding too:
$result = utf8_decode($result);
And check the returning data.
I'm trying to get address using place_id in hindi but I'm getting some special characters. Please someone help me.
<?php
$url = 'https://maps.googleapis.com/maps/api/place/details/json?placeid=ChIJLbZ-NFv9DDkRzk0gTkm3wlI&language=hi&key=AIzaSyBt7SRPMKW4pWc06NwuzFNCErXxnIlyEIY';
$headers = array(
'Content-Type: application/json'
);
// OPEN CONNECTION
$ch = curl_init();
// Set the url, number of POST vars, POST data
curl_setopt($ch, CURLOPT_URL, $url);
curl_setopt($ch, CURLOPT_POST, false);
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
// Disabling SSL Certificate support temporarly
curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false);
//curl_setopt($ch, CURLOPT_POSTFIELDS, json_encode($fields));
// Execute post
$result = curl_exec($ch);
if(curl_errno($ch)){
echo curl_error($ch);
}
// Close connection
curl_close($ch);
$result=json_decode($result);
//pr($result);
echo "<pre>";print_r($result->result->formatted_address);
?>
I've been trying for a while now to call a REST API, but still with no luck.
I've tested the connection, propreties and credentials with WizTools, so I'm 100% all the data is correct and working. Only when I try to connect to the API using custom PHP, things go wrong.
I use Fiddler for debugging and all I see is a request to the local path of the file with the code. For some reason, the snippet isn't calling the REST endpoint... I would like to know how does it come and what do I do wrong...
The code is hosted local (dev.testing.com).
At first sight, I would think the code below is correct, so I'm wondering why I get a GET http://dev.testing.com/talent.php HTTP/1.1 result in Fiddler, while I should get a POST https://api.some_url.com/package/REST/service/criteria?api_key=my_Key HTTP/1.1..
<?php
// Set all the data
$service_url = "https://api.some_url.com/package/REST/service/criteria?api_key=my_Key";
$service_user = 'iiii_My_Username:text:FO';
$service_pass = 'password';
// Initialize the cURL
$ch = curl_init($service_url);
// Set service authentication
curl_setopt($ch, CURLOPT_FOLLOWLOCATION, TRUE);
curl_setopt($ch, CURLOPT_USERPWD, "{$service_user}:{$service_pass}");
// Composing the HTTP headers
$body = "<searchCriteriaSorting></searchCriteriaSorting>";
$headers = array();
$headers[] = 'Accept: application/xml';
$headers[] = 'Content-Type: application/xml; charset=UTF-8';
// Set the cURL options
curl_setopt($ch, CURLOPT_HTTPHEADER, $headers);
curl_setopt($ch, CURLOPT_POSTFIELDS, $body);
curl_setopt($ch, CURLOPT_POST, TRUE);
curl_setopt($ch, CURLOPT_VERBOSE, 1);
curl_setopt($ch, CURLOPT_HEADER, TRUE);
curl_setopt($ch, CURLINFO_HEADER_OUT, true);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, TRUE);
curl_setopt($ch, CURLOPT_ENCODING, '');
curl_setopt($ch, CURLOPT_TIMEOUT, 15);
//WARNING: this would prevent curl from detecting a 'man in the middle' attack
curl_setopt ($ch, CURLOPT_SSL_VERIFYHOST, 0);
curl_setopt ($ch, CURLOPT_SSL_VERIFYPEER, 0);
// Execute the cURL
$data = curl_exec($ch);
// Print the result
echo $data;
?>
I have the following php code
curl_setopt($ch, CURLOPT_URL, $URL);
curl_setopt($ch, CURLOPT_USERAGENT, $this->_agent);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
curl_setopt($ch, CURLOPT_AUTOREFERER, true);
curl_setopt($ch, CURLOPT_HEADER, 1);
curl_setopt($ch, CURLOPT_HTTPHEADER, $this->_headers);
curl_setopt($ch, CURLOPT_ENCODING , "gzip");
curl_setopt($ch, CURLOPT_VERBOSE, false);
curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 1);
curl_setopt($ch, CURLOPT_TIMEOUT, 120);
curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, false);
curl_setopt($ch, CURLOPT_SSL_VERIFYHOST, 0);
curl_setopt($ch, CURLOPT_COOKIEFILE, $this->_cookie_file_path);
curl_setopt($ch, CURLOPT_COOKIEJAR, $this->_cookie_file_path);
curl_setopt($ch, CURLOPT_POSTFIELDS, '{"folderId":"1","parameters":{"amount":3,"ascending":false,"offset":0,"sort":"date"}}');
curl_setopt($ch, CURLOPT_POST, 1);
But I don't understand why is not working . The API that I'm posting the JSON to says that the parameters were not received . Is there anything wrong in my code ? I think the whole trick is on the JSON parameters... I'm not sure how to send them as I couldn't see any "nave->value" pair with the http analyzer as it usually appears in simple forms ... just that JSON code without any "name".
You can try as follows.
Basically if we have a array of data then it should be json encoded using php json_encode. And you should also add content-type in header which can be defined in curl as curl_setopt($ch, CURLOPT_HTTPHEADER, array('Content-Type: application/json'));
$data = array("country"=>"US","states"=>array("MHASASAS"=>"MH","XYZABABA"=>"XYZ"));
$postdata = json_encode($data);
$ch = curl_init($URL);
curl_setopt($ch, CURLOPT_SSL_VERIFYHOST, 0);
curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, 0);
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_POSTFIELDS, $postdata);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 1);
curl_setopt($ch, CURLOPT_HTTPHEADER, array('Content-Type: application/json'));
$result = curl_exec($ch);
curl_close($ch);
you can use this and replace with
curl_setopt($ch, CURLOPT_POSTFIELDS, '{"folderId":"1","parameters":{"amount":3,"ascending":false,"offset":0,"sort":"date"}}');
use this
$Parameters = array(
'MerchantCode' => $MerchantCode,
'PriceValue' => $amount,
'ReturnUrl' => $callback,
'InvoiceNumber' => $resnum,
);
curl_setopt($curl, CURLOPT_POSTFIELDS, json_encode($Parameters));
If:you use post method,you should know that:
CURLOPT_POST TRUE to do a regular HTTP POST. This POST is the normal application/x-www-form-urlencoded kind, most commonly used by HTML forms.
#see http://php.net/manual/en/function.curl-setopt.php
So:you can do like this:
$ar_form = array('name'=>'PHPJungle','age'=>66,'gender'=>'male');
$poststr = http_build_query($ar_form ); # important
$options[CURLOPT_HTTPGET] = false;
$options[CURLOPT_POST] = true;
$options[CURLOPT_POSTFIELDS] = $poststr ; //default type:application/x-www-from-urlencoded
curl_setopt_array ( $ch, $options );
# #todo your other codes
This is my class I have used for a long time.The class is based on PHP cURL.
It supports GET/POST，HTTP/HTTPS.
#see https://github.com/phpjungle/iHttp/
You can post a json data with curl like so:
Using Command Prompt:
curl -X POST -H "Content-Type: application/json" -d '{"folderId":"1","parameters":{"amount":3,"ascending":false,"offset":0,"sort":"date"}}' $url
Using PHP:
$data = array("folderId"=>"1","parameters"=>array("amount"=>3,"ascending"=>false,"offset"=>0,"sort"=>"date"));
$postdata = json_encode($data);
OR
$postdata = '{"folderId":"1","parameters":{"amount":3,"ascending":false,"offset":0,"sort":"date"}}';
$ch = curl_init($url);
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_POSTFIELDS, $postdata);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
curl_setopt($ch, CURLOPT_HTTPHEADER, array('Content-Type: application/json'));
$result = curl_exec($ch);
curl_close($ch);
print_r($result);
You haven't set the content type, so the post data is being sent as form data. Try setting the content type to application/json.
If that doesn't work, try wrapping the json string with an array.
$link = "http://test.domain/myquery";
$json = '{"folderId":"1","parameters":{"amount":3,"ascending":false,"offset":0,"sort":"date"}}';
$postdata = json_decode($json);
echo openurl($link, $postdata);
This works as json decode converts a json string into array.
function openurl($url, $postvars = "") {
$ch = curl_init();
curl_setopt($ch, CURLOPT_URL, $url);
curl_setopt($ch, CURLOPT_POST, 1);
curl_setopt($ch, CURLOPT_POSTFIELDS, $postvars);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
curl_setopt($ch, CURLOPT_TIMEOUT, '3');
$content = trim(curl_exec($ch));
curl_close($ch);
return $content;
}
if your API endpoint using body for send request using json data may be you can use Guzzle the doc is here doc.
use GuzzleHttp\Client;
$client = new Client();
$request = $this->client->post($url,array(
'content-type' => 'application/json'
),array());
$request->setBody($json_data);
$response = $request->send();
return $response;
hope this work.
You can do it make by steps:
$data = array(
'folderId'=>"1","parameters"=>array(
"amount"=>"3","ascending"=>false,"offset"=>0,"sort"=>"date"
)
);
$data_string = http_build_query($data);
$ch = curl_init();
curl_setopt($ch,CURLOPT_URL, $url);
curl_setopt($ch,CURLOPT_POST, count($data));
curl_setopt($ch,CURLOPT_POSTFIELDS, $data_string);
curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 1);
curl_setopt($ch, CURLOPT_SSL_VERIFYPEER, 0);
curl_setopt($ch, CURLOPT_HEADER, 0);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, 1);
$result = curl_exec($ch);
curl_close($ch);
$result = json_decode($result,true);
I don't know if you need the header. I think that by default it is already application/x-www-form-urlencode
If it doesn't work, try changing the $data values in array. Think it helps. :)
I'm not sure, that this is the solution but this works for me when posting json, change the json from
'{"folderId":"1","parameters":{"amount":3,"ascending":false,"offset":0,"sort":"date"}}'
to
"{'folderId':'1','parameters':{'amount':3,'ascending':false,'offset':0,'sort':'date'}}"
The only change i made was the double quotes are now on the outside, that works for me but I'm obviously posting to a different server
Only other help I could offer is to download a network debugging tool such as Fiddler or Charles proxy and monitor the requests sent/received, it could be a case that something else is wrong in your code.
Hope i helped :)
first of all
please check the curl http status code
$http_code= curl_get_info($exec_res,CURL_HTTP_CODE);
then modify this request header set with post header API server add a recorder to log those request info.