What's the best way of searching an array for a number within a range? e.g. between 1000 and 1500.
<?php
$numbers = array(1105,2140,3170);
$needle = **value between 1000 and 1500**;
if (in_array($needle, $numbers)) {
echo "Match found";
} else {
echo "Match not found";
}
?>
In this case, this would return 'Match found' as 1105 is between 1000 and 1500.
Can I set a range for the $needle variable?
What's the best way of searching an array for a number within a range. To answer this, there are 2 approaches as mentioned below:
Approach #1:
You can use a simple foreach loop to get all values from your unordered data which lie in the range.
<?php
$numbers = array(1105,2140,3170);
$start = 1000;
$end = 1500;
$result = [];
foreach($numbers as $num){
if($num >= $start && $num <= $end) $result[] = $num;
}
print_r($result);
Demo: https://3v4l.org/D1Rfu
Approach #2:(recommended for future lookups)
You can sort your data and use binary search to get the starting point of where your numbers start falling in the range of start and end for faster lookups. Then, you can just look from that index till the index you get a higher number or reach the end of the array.
<?php
$numbers = array(1105,2140,3170,1000,1500,1501);
$start = 1000;
$end = 1500;
$start_index = -1;
sort($numbers);
$low = 0; $high = count($numbers) - 1;
while($low <= $high){
$mid = intval(($low + $high) / 2);
if($numbers[$mid] > $end){
$high = $mid - 1;
}else if($numbers[$mid] < $start){
$low = $mid + 1;
}else{
$start_index = $mid;
$high = $mid - 1;
}
}
$result = [];
for($i = $start_index; $i < count($numbers); ++$i){
if($numbers[$i] > $end) break;
$result[] = $numbers[$i];
}
print_r($result);
Demo: https://3v4l.org/WcgXv
Yes, you can create a range and use it as the "needle", but not using in_array. You can create a range and compute the intersection of the numbers array. To just check for any match:
$numbers = array(1105, 2140, 3170);
$needle = range(1000, 1500);
if (array_intersect($numbers, $needle)) {
echo "Match found";
} else {
echo "Match not found";
}
Or to get the possible match(es):
$numbers = array(1105, 2140, 3170);
$needle = range(1000, 1500);
$result = array_intersect($numbers, $needle);
Or you can filter out the ones not in the range:
$numbers = array(1105, 2140, 3170);
$min = 1000;
$max = 1500;
$result = array_filter($numbers, function($v) use($min, $max) {
return $v >= $min && $v <= $max;
});
You will get an empty array if there are no matches in either case. Also, you don't state what you want if there is more than one, but you'll get an array in either case so you could use current for one or min and/or max instead:
$one = current(array_intersect($numbers, $needle));
$min = min(array_intersect($numbers, $needle));
$max = max(array_intersect($numbers, $needle));
There is no built-in function for these purpose. So create a function that will help you.
function searchOnRange(array $stack, $min=0, $max=0)
{
// Loop through each value of array
foreach($stack as $value){
// CHeck value is between the given range
if(($value >= $min) && ($value <= $max)){
echo "Match found - ".$value;
} else {
echo "Match not found - ".$value;
}
}
}
$numbers = array(1105,2140,3170);
searchOnRange($numbers, 1000, 1500);
Related
I need to get 50 random numbers out of range 1-100 without repeating. The current way i do is :
$array = array();
while (count($array) <= 50) {
$temp = random_int(1,100);
if (!in_array($temp, $array))
$array[] = $temp;
}
However, the looping is too many because I need to generate for more than 100,000 times.
Is there other ways that I can get a 50 random non-repeating numbers without looping ?
For example:
$number= range(1,100);
$array = array_slice(shuffle($number),0,50);
I can't use shuffle because it uses pseudo random number.
Is there other ways to achieve what I need, or ways that could shorten time.
pre fill a array of numbers and pick from them, and then remove it.
it prevents the unnecessary random generations you have
$numbers = [];
for ($i = 1; $i <= 100; $i++) {
$numbers[] = $i;
}
$randomNumbers = [];
for ($i = 1; $i <= 50; $i++) {
$r = rand(0, count($numbers) - 1);
$randomNumbers[] = $numbers[$r];
array_splice($numbers, $r, 1);
}
This would be my approach:
This gives you 50 numbers in any case, and they are defenitely different from each other. PLUS: you dont have to prefill some other array:
$start = microtime(true);
for($i = 0; $i <= 100000; $i++){
$arr = [];
while(sizeof($arr) < 50){
$num = rand(1, 100);
$arr[$num] = $num;
}
if(array_unique($arr) !== $arr || sizeof($arr) !== 50 ){
print("FAIL");
}
//print(array_unique($arr) == $arr ? "true" : "false");print("<br>");
//print(sizeof($arr));print("<br>");
//print_r(array_count_values ($arr));print("<br>");
//print_r($arr);print("<br>");
}
$time_elapsed_secs = microtime(true) - $start;
print($time_elapsed_secs);print("<br>");
Running this 100000 times takes about 0.4sec for me.
The actual generation is done in this part:
$arr = [];
while(sizeof($arr) < 50){
$num = rand(1, 100);
$arr[$num] = $num;
}
We can do in 2 steps:
$x = 0;
$arr = [];
while($x < 50){
$tmp = rand(1, 100);
if(!in_array($tmp, $arr)){
$arr[] = $tmp;
$x++;
}
}
I am trying to display possibilities for additions of specific numbers but have not been getting the right results.
<?php
$num3 = 20;
$set = null;
$balance = $num3;
$dig = mt_rand(1,5);
for($i = $balance; $i > 0; $i -= $dig ){
echo $dig.'<br>';
if($i < 1){
$set .= $i;
$balance = 0;
}
else{
$set .= $dig.'+';
$dig = mt_rand(1,5);
}
}
echo $set.'='.$num3;
?>
Here are some of the outputs:
2+5+1+4+5+3+=20
1+4+3+5+3+=20
3+1+1+2+3+4+4+1+3+=20
Appreciate any pointers. Thank in advance...
Ok, even though the requirement isn't completely clear, here's an approach:
(edit: demonstrating prevention of endless loop)
$max_loops = 1000;
$balance = 20;
$found = [];
while($balance > 0 && $max_loops-- > 0) {
$r = mt_rand(1, 5);
if ($balance - $r >= 0) {
$found[] = $r;
$balance -= $r;
}
}
echo implode(' + ', $found) . ' = '.array_sum($found);
Note: This code has a small risk of getting caught in an endless loop... though it's doubtful that it'll ever happen :)
Edit: Now the loop contains a hard-limit of 1000 iterations, after which the loop will end for sure...
To provoke an endless loop, set $balance = 7 and modify mt_rand(4, 5).
You can use a recursive function for this:
function randomAddends($target, $maxAddend = 5, $sum = 0, $addends = [])
{
// Return the array of addends when the target is reached
if ($target <= $sum) {
return $addends;
}
// generate a new random addend and add it to the array
$randomAddend = mt_rand(1, min($maxAddend, $target - $sum));
$addends[] = $randomAddend;
// make the recursive call with the new sum
return randomAddends($target, $maxAddend, $sum + $randomAddend, $addends);
}
Alright so I am trying to find out how to get a number that is closer to result
For example
$number_1 = 100
$number_2 = 150
$result = 130
In this case number_2 is 20 away therefore its closer than number_1. Now I could simply substract number_2 and number_1 from result and see what is closer but I dont want to do it since I have to do bunch of if statements to check maybe number_2 is bigger than result and so on...
Question: How do I find out which number is closer to result in a fast & efficient way & how to check if their distance to result is same?
Give this a try:
<?php
$nums = [
100, 150, 200, 225, 6, 17
];
function closestNumber($numToMatch, array $numbers)
{
$distances = [];
foreach ($numbers as $num) {
if ($num == $numToMatch) {
$distances[$num] = 0;
} elseif ($num < $numToMatch) {
$diff = $numToMatch - $num;
$distances[(string)$num] = $diff;
} else {
$diff = $num - $numToMatch;
$distances["$num"] = $diff;
}
}
asort($distances);
$keys = array_keys($distances);
return $keys[0];
}
echo closestNumber(130, $nums);
We create an array of distances, and then calculate and sort them, finally returning the closest match, being the first element in the sorted array. Have a try of it here: https://3v4l.org/SeqZR
Loop through an array:
$number[0] = 100;
$number[1] = 150;
$baseNumber = 130;
for ($i=0;$i < count($number);$i++) {
$difference[$i] = abs($number[$i] - $baseNumber);
}
$index = array_search(min($difference), $difference);
echo $number[$index];
This will give you the value with the smallest difference in the array.
idk maybe that ?
dist_1 = fabs(result - number_1)
dist_2 = fabs(result - number_2)
if there is more than three values :
an asc list
find the index of result (dichotomic search)
check left & right index
This should work -
$number_1 = 100;
$number_2 = 150;
$number_3 = 160;
$number_4 = 170;
$number_5 = 180;
$result = 130;
// A array to store all the elements
$arr = array($number_1, $number_2, $number_3, $number_4, $number_5, $result);
sort($arr); // sort the array in asc
$pos = array_search($result, $arr); // find the result element
if($pos === 0)
{// if element is the first then closest is second
$closest = $arr[1];
}
elseif ($pos === (count($arr) - 1))
{// if last then closest is 2nd last
$closest = $arr[$pos - 1];
}
else
{// calculate the difference and set closest
$prev = $arr[$pos] - $arr[$pos - 1];
$next = $arr[$pos + 1] - $arr[$pos];
$closest = ($prev >= $next) ? $arr[$pos + 1] : $arr[$pos - 1];
}
echo $closest;
Output
150
Working code
Let's say I have this array
$number = [2,1,4,3,6,2];
First pair the elements on an array by two's and find their difference
so this is the output in the first requirement
$diff[] = [1,1,4];
Second sum all the difference
this is the final output
$sum[] = [6];
Conditions:
the array size is always even
the first element in a pair is always greater than the second one, so their is no negative difference
What I've done so far is just counting the size of an array then after that I don't know how to pair them by two's. T_T
Is this possible in php? Is there a built in function to do it?
One line:
$number = [2,1,4,3,6,2];
$total = array_sum(array_map(function ($array) {
return current($array) - next($array);
}, array_chunk($number, 2)));
echo $total;
This should work fine:
<?
$number = array(2,1,4,3,6,2);
for($i=0;$i<count($number); $i+=2){
$dif[] = $number[$i] - $number[$i+1];
}
print_r($dif);
$sum = 0;
foreach ($dif as $item){
$sum += $item;
}
echo 'SUM = '.$sum;
?>
Working CODE
If you want all the different stages kept,
$numbers = [2,1,4,3,6,2];
$diff = [];
for($i=0,$c=count($numbers);$i<$c;$i+=2)
{
$diff[] = $numbers[$i]-$numbers[$i+1];
}
$sum = array_sum($diff);
Else, to just get the total and bypass the diff array:
$numbers = [2,1,4,3,6,2];
$total = 0;
for($i=0,$c=count($numbers);$i<$c;$i+=2)
{
$total += $numbers[$i]-$numbers[$i+1];
}
I have got this far it gives the required solution.
$arr = array(2,1,4,3,6,2);
$temp = 0;
$diff = array();
foreach ($arr as $key => $value) {
if($key % 2 == 0) {
$temp = $value;
}
else {
$diff[] = $temp - $value;
}
}
print_R($diff);
print 'Total :' . array_sum($diff);
Note : Please update if any one knows any pre-defined function than can sorten this code.
Please check and see if this works for you.
<?php
$sum=0;
$number = array(2,1,4,3,6,2);
for ($i=0;$i<=count($number);$i++) {
if ($i%2 == 1 ) {
$sum = $sum + $number[$i-1] - $number[$i];
}
}
print $sum;
?>
Well with your conditions in mind I came to the following
$number = [2,1,4,3,6,2];
$total = 0;
for($i = 0; $i < count($number); $i+=2) {
$total += $number[$i] - $number[$i + 1];
}
Try this one:
$number = array(2,1,4,3,6,2);
$diff = array();
$v3 = 0;
$i=1;
foreach($number as $val){
if ($i % 2 !== 0) {
$v1 = $val;
}
if ($i % 2 === 0) {
$v2 = $val;
$diff[] = $v1-$v2;
$v3+= $v1-$v2;
}
$i++;
}
print $v3;//total value
print_r($diff); //diff value array
I've recently send my CV to one company that was hiring PHP developers. They send me back a task to solve, to mesure if I'm experienced enough.
The task goes like that:
You have an array with 10k unique elements, sorted descendant. Write function that generates this array and next write three different functions which inserts new element into array, in the way that after insert array still will be sorted descendant. Write some code to measure speed of those functions. You can't use PHP sorting functions.
So I've wrote function to generate array and four functions to insert new element to array.
/********** Generating array (because use of range() was to simple :)): *************/
function generateSortedArray($start = 300000, $elementsNum = 10000, $dev = 30){
$arr = array();
for($i = 1; $i <= $elementsNum; $i++){
$rand = mt_rand(1, $dev);
$start -= $rand;
$arr[] = $start;
}
return $arr;
}
/********************** Four insert functions: **************************/
// for loop, and array copying
function insert1(&$arr, $elem){
if(empty($arr)){
$arr[] = $elem;
return true;
}
$c = count($arr);
$lastIndex = $c - 1;
$tmp = array();
$inserted = false;
for($i = 0; $i < $c; $i++){
if(!$inserted && $arr[$i] <= $elem){
$tmp[] = $elem;
$inserted = true;
}
$tmp[] = $arr[$i];
if($lastIndex == $i && !$inserted) $tmp[] = $elem;
}
$arr = $tmp;
return true;
}
// new element inserted at the end of array
// and moved up until correct place
function insert2(&$arr, $elem){
$c = count($arr);
array_push($arr, $elem);
for($i = $c; $i > 0; $i--){
if($arr[$i - 1] >= $arr[$i]) break;
$tmp = $arr[$i - 1];
$arr[$i - 1] = $arr[$i];
$arr[$i] = $tmp;
}
return true;
}
// binary search for correct place + array_splice() to insert element
function insert3(&$arr, $elem){
$startIndex = 0;
$stopIndex = count($arr) - 1;
$middle = 0;
while($startIndex < $stopIndex){
$middle = ceil(($stopIndex + $startIndex) / 2);
if($elem > $arr[$middle]){
$stopIndex = $middle - 1;
}else if($elem <= $arr[$middle]){
$startIndex = $middle;
}
}
$offset = $elem >= $arr[$startIndex] ? $startIndex : $startIndex + 1;
array_splice($arr, $offset, 0, array($elem));
}
// for loop to find correct place + array_splice() to insert
function insert4(&$arr, $elem){
$c = count($arr);
$inserted = false;
for($i = 0; $i < $c; $i++){
if($elem >= $arr[$i]){
array_splice($arr, $i, 0, array($elem));
$inserted = true;
break;
}
}
if(!$inserted) $arr[] = $elem;
return true;
}
/*********************** Speed tests: *************************/
// check if array is sorted descending
function checkIfArrayCorrect($arr, $expectedCount = null){
$c = count($arr);
if(isset($expectedCount) && $c != $expectedCount) return false;
$correct = true;
for($i = 0; $i < $c - 1; $i++){
if(!isset($arr[$i + 1]) || $arr[$i] < $arr[$i + 1]){
$correct = false;
break;
}
}
return $correct;
}
// claculates microtimetime diff
function timeDiff($startTime){
$diff = microtime(true) - $startTime;
return $diff;
}
// prints formatted execution time info
function showTime($func, $time){
printf("Execution time of %s(): %01.7f s\n", $func, $time);
}
// generated elements num
$elementsNum = 10000;
// generate starting point
$start = 300000;
// generated elements random range 1 - $dev
$dev = 50;
echo "Generating array with descending order, $elementsNum elements, begining from $start\n";
$startTime = microtime(true);
$arr = generateSortedArray($start, $elementsNum, $dev);
showTime('generateSortedArray', timeDiff($startTime));
$step = 2;
echo "Generating second array using range range(), $elementsNum elements, begining from $start, step $step\n";
$startTime = microtime(true);
$arr2 = range($start, $start - $elementsNum * $step, $step);
showTime('range', timeDiff($startTime));
echo "Checking if array is correct\n";
$startTime = microtime(true);
$sorted = checkIfArrayCorrect($arr, $elementsNum);
showTime('checkIfArrayCorrect', timeDiff($startTime));
if(!$sorted) die("Array is not in descending order!\n");
echo "Array OK\n";
$toInsert = array();
// number of elements to insert from every range
$randElementNum = 20;
// some ranges of elements to insert near begining, middle and end of generated array
// start value => end value
$ranges = array(
300000 => 280000,
160000 => 140000,
30000 => 0,
);
foreach($ranges as $from => $to){
$values = array();
echo "Generating $randElementNum random elements from range [$from - $to] to insert\n";
while(count($values) < $randElementNum){
$values[mt_rand($from, $to)] = 1;
}
$toInsert = array_merge($toInsert, array_keys($values));
}
// some elements to insert on begining and end of array
array_push($toInsert, 310000);
array_push($toInsert, -1000);
echo "Generated elements: \n";
for($i = 0; $i < count($toInsert); $i++){
if($i > 0 && $i % 5 == 0) echo "\n";
printf("%8d, ", $toInsert[$i]);
if($i == count($toInsert) - 1) echo "\n";
}
// functions to test
$toTest = array('insert1' => null, 'insert2' => null, 'insert3' => null, 'insert4' => null);
foreach($toTest as $func => &$time){
echo "\n\n================== Testing speed of $func() ======================\n\n";
$tmpArr = $arr;
$startTime = microtime(true);
for($i = 0; $i < count($toInsert); $i++){
$func($tmpArr, $toInsert[$i]);
}
$time = timeDiff($startTime, 'checkIfArraySorted');
showTime($func, $time);
echo "Checking if after using $func() array is still correct: \n";
if(!checkIfArrayCorrect($tmpArr, count($arr) + count($toInsert))){
echo "Array INCORRECT!\n\n";
}else{
echo "Array OK!\n\n";
}
echo "Few elements from begining of array:\n";
print_r(array_slice($tmpArr, 0, 5));
echo "Few elements from end of array:\n";
print_r(array_slice($tmpArr, -5));
//echo "\n================== Finished testing $func() ======================\n\n";
}
echo "\n\n================== Functions time summary ======================\n\n";
print_r($toTest);
Results can be found here: http://ideone.com/1xQ3T
Unfortunately I was rated only 13 points out of 30 for this task (don't know how it was calculated or what exactly was taken in account). I can only assume that's because there are better ways to insert new element into sorted array in PHP. I'm searching this topic for some time now but couldn't find anything good. Maby you know of better approach or some articles about that topic?
Btw on my localhost (PHP 5.3.6-13ubuntu3.6 with Suhosin-Patch, AMD Athlon(tm) II X4 620) insert2() is fastest, but on ideone (PHP 5.2.11) insert3() is fastest.
Any ideas why? I suppose that array_splice() is tuned up somehow :).
//EDIT
Yesterday I thought about it again, and figured out the better way to do inserts. If you only need sorted structure and a way to iterate over it and your primary concern is the speed of insert operation, than the best choise would be using SplMaxHeap class. In SplMaxHeap class inserts are damn fast :) I've modified my script to show how fast inserts are. Code is here: http://ideone.com/vfX98 (ideone has php 5.2 so there won't be SplMaxHeap class)
On my localhost I get results like that:
================== Functions time summary ======================
insert1() => 0.5983521938
insert2() => 0.2605950832
insert3() => 0.3288729191
insert4() => 0.3288729191
SplMaxHeap::insert() => 0.0000801086
It may just be me, but maybe they were looking for readability and maintainability as well?
I mean, you're naming your variables $arr, and $c and $middle, without even bothering to place proper documentation.
Example:
/**
* generateSortedArray() Function to generate a descending sorted array
*
* #param int $start Beginning with this number
* #param int $elementsNum Number of elements in array
* #param int $dev Maximum difference between elements
* #return array Sorted descending array.
*/
function generateSortedArray($start = 300000, $elementsNum = 10000, $dev = 30) {
$arr = array(); #Variable definition
for ($i = 1; $i <= $elementsNum; $i++) {
$rand = mt_rand(1, $dev); #Generate a random number
$start -= $rand; #Substract from initial value
$arr[] = $start; #Push to array
}
return $arr;
}