Fragmenting incoming data with PHP Json - php

The form of the incoming json data:
{
"statusCode": 200,
"message": "success",
"result": [
{
"longitude": -87.06687,
"start_location_latitude": 20.63589,
"start_location_longitude": -87.06687,
"end_location_latitude": 20.63589,
"end_location_longitude": -87.06687,
"highlights": [
{
"title": "Oh Yes...Mezcal Shots",
"url": "https://phoenix-cdn.azureedge.net/phoenix-blob-public-exps/1396_Mezcal_Shot.jpg"
},
{
"title": "Playa Del Carmen Beachfront",
"url": "https://phoenix-cdn.azureedge.net/phoenix-blob-public-exps/1396_Playa_Del_Carmen-Beach_Punta_Esmeralda.jpg"
},
{
"title": "Visit the Market",
"url": "https://phoenix-cdn.azureedge.net/phoenix-blob-public-exps/1396_Playa_Del_Carmen.jpg"
}
]
}
]
}
This incoming data is combined into a single line.
https://phoenix-cdn.azureedge.net/phoenix-blob-public-exps/1396_Mezcal_Shot.jpghttps://phoenix-cdn.azureedge.net/phoenix-blob-public-exps/1396_Playa_Del_Carmen-Beach_Punta_Esmeralda.jpghttps://phoenix-cdn.azureedge.net/phoenix-blob-public-exps/1396_Playa_Del_Carmen.jpg
But what I want to do is to get the first 4 of these data, for example, by throwing them into separate variables and using them. However, I was never able to do that.
My code:
foreach($UnlockData as $highlights)
{
foreach($highlights as $SingleImage)
{
if(strlen($SingleImage['url']) > 3) {
echo $SingleImage['url'];
}
}
}

This will return the first 4 highlights from each entry in result. I am using the json object vs array because I find using it as objects makes for easier to read code.
<?php
$json = json_decode($incomingJSON);
foreach ($json->result as $result) {
$ctr = 0 ;
foreach($result->highlights as $highlight) {
if (strlen($highlight->url) < 5) continue;
echo "<P>" . $highlight->title. " - " . $highlight->url;
$ctr ++;
if ($ctr>3) break;
}
}

If there is ever only one result then just get all the url from highlights (not clear why the strlen):
$urls = array_column($array['result'][0]['highlights'], 'url');
foreach($urls as $url) {
if(strlen($url) > 3) {
echo $url;
}
}
If there are multiple result then get all the highlights and then get all the url from that:
$urls = array_column(array_column($array['result'], 'highlights'), 'url']);

Related

Inserting multiple arrays into same array section

I have a problem when I try to insert using one loop arrays into a specific place in the JSON. The app is designed to create a dictionary with main terms and their subterms (synonyms) . I succeeded to create the main terms but I can't add subterms. one entry contains main term and their translations and then subterms are encapsulated in "Subterms" sections with translations.
The final JSON file format I need is :
{
"glossary":{
"0":{
"id":4,
"English":{
"term":"accountability ",
"definition":"An obligation or willingness to use power"
}
},
"Subterms":[
{
"id":1,
"English":{
"term":"behavior change communication",
"definition":"The strategic use of communication approaches"
}
}
]
}
I want to insert multiple Arrays with a loop (in the example above is just English) into "Subterms" but no matter what I try is not letting me access that position.
PHP code:
<?PHP
$posts = array();
$subterms = array();
................
for($i = 0; $i < $val['maxentry']; $i++)
{
if ($i==1)
{
$dataheadenglish = $db->getRecFrmQry($queryheadenglish);
$headenglish = array (
'term'=> $dataheadenglish[0]['term'],
'definition'=> $dataheadenglish[0]['definition'],
)
$posts[] = array(
'id' => intval($dataheadenglish[0]['row']),
'English'=> $headenglish,
);
}
else
{
$dataenglish= $db->getRecFrmQry($queryenglish);
if(!empty($dataenglish))
{
$english= array (
'term'=> $dataenglish[0]['term'],
'definition'=> $dataenglish[0]['definition'],
);
}else $english=array();
// same for all languages to be inserted
$subterms[] = array(
'English'=> $english,
'Arabic'=> $arabic,
'Turkmen'=> $turk,
);
}
}
?>
I tried with :
$posts['Subterms'] = $subterms;
$posts['Subterms'][] = $subterms;
array_push($posts["Subterms"],$subterms);
but the subterms appears before posts(aka headterm)
{
"glossary": {
"Subterms": [
{
"English": [],
"Arabic": {
"term": "\u0627\u0644\u0645\u0633\u0627\u0621\u0644\u0629",
"definition": "",
"source": "",
}
},
"Kurdish_Badhini": [],
"Kurdish_Kurmanji": [],
"Kurdish_Sorani": [],
"Turkmen": []
}
],
"0": {
"English": {
"term": "accountability ",
"definition": "An obligation or willingness to use power responsibly and be held accountable for one's actions, both as individuals and as organizations.",
},
It should appear part of "0"
Thank you
In the beginning you showed a pattern of JSON you need, but at the end you said 'It should appear part of "0"'. Based on you example of JSON, I'll assume you wanted to say "past of".
If it got it right, the Subterms are being put before the "0" because it's exactly what you are telling it to do.
You are testing if $i is equal to 1, and because your for is starting with $i=0, your else will be happening before your if, so your subterms are being put in the array first.
if ($i==1) // because of this
{
// your code
}
else
{
// your code
}
My suggestion is to change this test from $i==1 to $i==0, so your if will happen first.

PHP need to count how many instaneces of specific value in array

I have a JSON file which structure looks like this (very simplified):
[
{
"customerId": "M12345",
"houses": [
{
"id": "OBJ12345_1731321200",
"status": {
"id": "4",
"name": "Sold"
}
],
"plots": [
{
"id": "OBJ12345_1771637082",
"status": {
"id": "4",
"name": "Sold"
}
],
"projects": [],
"farms": [],
"commercialPropertys": [],
"condominiums": [],
"foreignProperties": [],
"premises": []
}
]
I have figured out how to count how many "houses" or "plots" there is:
$content = file_get_contents('estateList/estateList.json');
$GetEstateList = json_decode($content);
count($GetEstateList[0]["houses"]);
count($GetEstateList[0]["plots"]);
BUT Trying to figure out using php how to count how many objects which have a condition status(id:4)
I think you will need to use a loop in order to count the objects, i would use a foreach loop, bellow is an example :
$count = 0;
foreach ( $GetEstateList[0] as $key => $value){
if (isset($value['status']) && $value['status']['id'] === "4") {
$count++;
}
}
First, you need to enter the GetEstateList array, then you need to do a cycle for each type (for now types showed are plots and houses), then you need another cycle, because each type is an array of elements and can have more than one estate.
So, try this code:
// Counter variable for condition expressed after (status == 4)
$counter = 0;
// Enter the array and get `customerId`, `houses` and `plots`,
// but we only need the types of estate, so only `houses` and `plots`, in this case
foreach ( $GetEstateList as $estate_array => $array_attr ) {
// We only need `houses` and `plots` (increasing algorithm performance)
if ( $array_attr == "houses" || $array_attr == "plots" ) {
// We're checking all types of estates (all `houses` and all `plots`)
foreach ( $array_attr as $type => $parameter ) {
// So, we can get `status` of every estate
if ( $parameter == "status") {
// And finally we can get `id` for each estate `status`
if ( $parameter["id"] == "4" ) {
$counter++;
}
}
}
}
}
Notice: the code above cannot work if the written JSON structure is too different from the original.
I figured it out myself...
Maybe not the "correct" way but it works! :)
Feel free to comment on any improvement or modifications...
$StatusCount = 0;
foreach ($GetEstateList[0] as $GetEstateType) {
foreach ($GetEstateType as $GetEstate) {
if ($GetEstate["status"]["id"] == "4") {
$StatusCount++;
}
}
}

PHP Json see if value exist

I've been looking all over the interwebz for a simple answer but can't find any. So, the question is:
I'm going to decode some JSON to see if a value exists; though, I don't think I'm doing it right. I want to check if the value of appid: 730 exists.
Here's the JSON:
{
response: {
game_count: 106,
games: [
{
appid: 10,
playtime_forever: 67
},
{
appid: 730,
playtime_forever: 0
},
{
appid: 368900,
playtime_forever: 0
},
{
appid: 370190,
playtime_forever: 0
},
]
}
}
This is what I want:
$json = file_get_contents('JSON URL HERE');
$msgArray = json_decode($json, true);
if (appid: 730 exists) {
...
}
Thanks, hope I explained enough.
Firstly, you have invalid json. See the comment in the string deceleration below (this might be a typo in your question).
$json = '{
"response": {
"game_count": 106,
"games": [
{
"appid": 10,
"playtime_forever": 67
},
{
"appid": 730,
"playtime_forever": 0
},
{
"appid": 368900,
"playtime_forever": 0
},
{
"appid": 370190,
"playtime_forever": 0
} // <------ note the lack of `,`
]
}
}';
$arr = json_decode($json, true);
foreach($arr['response']['games'] as $game) {
if($game['appid'] === 730) { // I would strictly check (type) incase of 0
echo "exists"; // or do something else
break; // break out if you dont care about the rest
}
}
example
We're just looping through the games array and checking its appid. Then we just do something and then break the loop to prevent overhead.
I find this solution quite straight forward:
$r='{
"response": {
"game_count": 106,
"games": [
{
"appid": 10,
"playtime_forever": 67
},
{
"appid": 730,
"playtime_forever": 0
},
{
"appid": 368900,
"playtime_forever": 0
},
{
"appid": 370190,
"playtime_forever": 0
}
]
}
}';
function find($arr, $id) {
if(!empty($arr))
foreach ($arr as $key => $value) {
if( isset( $value->appid ) && $value->appid == $id )
return true;
}
return false;
}
$obj = json_decode($r);
if( isset($obj) && isset($obj->response) ) {
if( isset($obj->response->games) && !empty($obj->response->games) )
$arr = $obj->response->games;
else
$arr = array();
} else {
echo "NOT valid found\n";
}
$appid = 730;
if( find($arr, $appid) )
echo "Appid $appid found\n";
else
echo "Appid $appid NOT found\n";
It is very convenient to parse and validate the results coming from other Web Services before accessing their data, so we avoid and development time.
I hope it is what you are looking for.
json_decode()
is actually going to return the decoded JSON. JSON is a string, decoded JSON is an array of objects.
You will need to iterate over that array of objects to inspect each.
$msgArray = json_decode($json);
foreach($msgArray->response->games as $game) {
if($game->appid == 730) {
// it exists
}
}
try this
$json = file_get_contents('JSON URL HERE');
$msgArray = json_decode($json, true);
foreach($msgArray['response']['games'] as $key => $value){
if ($value['appid'] == 730) {
//do something
}else{
// do else
}
}

make php variable from plain text get file

currently i am using the below code to get a file from a site which tells me the current server status of a game server. the file is in plain text format and out puts the following depending on server status:
ouput:
{ "state": "online", "numonline": "185" }
or
{ "state": "offline" }
or
{ "state": "error" }
file get code:
<?php
$value=file_get_contents('http:/example.com/server_state.aspx');
echo $value;
?>
I would like to turn the 'state' and 'numonline' into their own variables so i could output them using a if, like:
<?php
$content=file_get_contents('http://example.com/server_state.aspx');
$state <--- what i dont know how to make
$online <--- what i dont know how to make
if ($state == online) {
echo "Server: $state , Online: $online";
} else {
echo "Server: Offline";
)
?>
but i have no idea how to turn the 'state' and 'numonline' from the plain text into a variable of their own ($state and $online), how would i go about doing this?
Your data is JSON. Use json_decode to parse it into a usable form:
$data = json_decode(file_get_contents('http:/example.com/server_state.aspx'));
if (!$data) {
die("Something went wrong when reading or parsing the data");
}
switch ($data->state) {
case 'online':
// e.g. echo $data->numonline
case 'offline':
// ...
}
Use json_decode function:
$value = '{ "state": "online", "numonline": "185" }';
$json = json_decode($value, true);
print_r($json);
if ($json['state'] == 'online') {
echo "Server: " . $json['state'] . " , Online: " . $json['numonline'];
} else {
echo "Server: Offline";
}
Output:
Array
(
[state] => online
[numonline] => 185
)
I would like to turn the 'state' and 'numonline' into their own variables:
Maybe you are looking for extract,
Example:
$value = '{ "state": "online", "numonline": "185" }';
$json = json_decode($value, true);
extract($json);
//now $state is 'online' and $numonline is 185

PHP parsing a line from within a Json API page

I am trying to convert this script over from finding one set of variables eg(playtime_forever) to finding another variable eg(backpack_value)
if (!empty($data->response->games)) {
foreach ($data->response->games as $game) {
if ($game->appid == $game_id) {
$playtime = $game->playtime_forever;
if (($playtime < 5940) && ($playtime > 1)) {
$fh = fopen("final.".$timestamp.".txt", 'a') or die("Can't open file");
...
The page it originally parsed looked like this
http://pastebin.com/rnnCsijd
but will now be this. Pulled from here
http://backpack.tf/api/IGetUsers/v2/?&steamids=76561197992146126&format=json%27;
{
"response": {
"success": 1,
"current_time": 1369669066,
"players": {
"0": {
"steamid": "76561197992146126",
"success": 1,
"backpack_value": 36412.71,
"backpack_update": 1369630863,
"name": ":HIT: Bobo the Monkey Boy",
"notifications": 0
}
}
}
}
A small change but I am unable to make the script do what I want. If you could explain how to go about this and the steps behind it, it would be great. I have been trying for a while but I am unable to finish the script
To get the profiles as per your comment, use this code:
$profiles = array(); //init array so we can use $profiles[] later
$limitValue = 1000; //Limit value of backpack_value
foreach($data->response->players as $player) { // Loop thrugh all the players
if ($player->backpack_value < $limitValue) { // Check the backpack_value
$profiles[] = $player; // Assign the required players to a new array
}
}
var_dump($profiles); // Dump the array to browser for debugning

Categories