my web that I have coded not uploaded as I expected it show me the directory instead of my page.
when you work in Zamp software, you create a folder in the htdocs folder and then drop your projects in it. For example, if the folder name in the htdocs folder is test and the project name is one, you should go to localhost / test / one. php When you go to this path, the project runs directly. There is another way that you went this way. Write localhost / index, which you opened correctly. Now look for the name of your project in this section and click on it. But if there is no project or the project does not load, there is something wrong with your workplace. Example of code errors and your work path I hope this article has helped you
Related
I am completely new to web-dev and wamp, I have to use it for a college project to build a website using php. I installed the newest version of wamp. I cloned my project repository into the www folder.
When I run "localhost" in the browser, I get the generic wamp page and I can see my project folder on the bottom of the page under the "Projects" heading
when I click on the project it does not open and I get a 404 not found error. This is not the same issue a thousands other people have written about, where when they uses the path "localhost/projectname" they get access to their project but when they just click their project the path is "projectname" and they dont see their project. I have read tons of posts with people that have that problem and I do not think I have the same issue becase when I click on my project link on the wamp hompage, I get the complete path "http://localhost/PaperCloudBackend/" and this shows a 404 error
Keep in mind that all I have done with wamp so far is:
1) install it
2) clone repo into www folder
3) opened browser with localhost
4) clicked on my project name
I would really like a concise answer to why this is happening so I can learn the root cause, and also a solution to the problem because i have not contributed to my team codebase at all and I have not been able to solve this issue after 1 week.
Thanks
I assume that its an .htaccess error which is clashing . If you have .htaccess in your project then check it if you have given the correct url in the .htaccess rule or you can delete the file(.htaccess) and run the project in your browser.
Another problem that you should check is there any index file is present in the root of the folder you are trying to access.
I hope this might help you.
Currently thats also happed with me on window8.1, To prevent this open the index.php file from root directory wamp/www/index.php.
Change
$suppress_localhost = true;
To
$suppress_localhost = false;
Hope this will help you to fix the problem.
Please make sure that index file exist in your "PaperCloudBackend" directory as it is the entry point of execution.
I have xampp but dont know how to test my website. the whole site is in C:\brutal doom\web Tester\Phoenix TKD. Do you know how to do this and if so how. Would be helped with pictures.
first coppy your site folder to your c:\xampp\htdocs
then open your xampp control panel and start the first two options
then go to http://localhost/your-site-folder-name-here
and you should see your website
1.First Create a folder in C:\xampp\htdocs\Phoenix
2.Copy your all website data & past to C:\xampp\htdocs\Phoenix folder.
3.Then go to http://127.0.0.1/Phoenix /index.php
We recently have adquired the credentials to fully play with our website hosted outside.
So we need to mount it locally on a XAMPP stack to fully deploy the site and asociated database.
It've been already done, and everything seems to work properly except for the images in the site.
It is a DRUPAL site. Some images are "full path coded", so they work as we can expect, but major of them are just relative path coded.
Now, I've everything mounted on localhost. Let's say the folder with the site it's called "web".
Then i've everything on:
c:/xampp/htdocs/web/.......
So I access to it via: http://localhost/web/
I've tested that all the non viewing images, if I append the "http://localhost/web/" on the 'src="/site/..."' they are accessible and look right.
So, is there a way to via .htaccess add the "http://localhost/web/" on those URLs who hasn't it? It doesn't only happens with images, it's just related with all the links, urls, srcs, whatever which is just "relative pathed".
I've already tried the "RewriteBase /web", but it doesn't work.
Need help to solve this so, please.
In summarize, the site online is just mounted on the root, so everything works, fully or just relativetly pathed. But in my case, I've got the development site inside a folder, so I need it to work too!
Much appreciated.
If this is a Drupal 7 site (might work for Drupal 6) make sure you have a tmp directory set. Go to admin/config/media/file-system and look for the temporary directory. Also confirm that you have this directory on your root, which for XAMPP is the htdocs folder.
This might be a file permission that can be caused by incorrect .htaccess settings (This link may help: https://www.drupal.org/node/2140629) in the folder set as your temporary directory.
This may also be a document root error. You can change that by editing the DocumentRoot setting in C:\xampp\apache\conf\httpd.conf.
This stackoverflow link may help if none of the above suggestions bear fruit: https://drupal.stackexchange.com/questions/30113/configuring-the-temporary-directory
For some reason when I create a project in netbeans and go to run the project it also loads the xxamp index file and not the project index file that is apart of the codeigniter installation.
http://screencast.com/t/qOSH80wPgvf
Edit:
Here is my file tree I have right now set up for my project. Why Netbeans creates an important files folder I have no idea for my CI project. I have edited the index file to have the application and system variable to both have the ../system or applicaton as its value. I have changed the Web Root inside the project properties to have a value of public_html and I have also changed the value of the Index File field to say index.php.
After doing this and running the project I would expect to get the default Welcome to Codeigniter page and I don't. I am receiving a message that shows the following. Any ideas on why this is?
Object not found!
The requested URL was not found on this server. If you entered the URL manually please check your spelling and try again.
If you think this is a server error, please contact the webmaster.
Error 404
localhost
Apache/2.4.4 (Win32) OpenSSL/0.9.8y PHP/5.4.16
Projects
- MyFirstProject
- Source Files
- application
- public_html
- assets
index.php
- system
- Test Files
- Important Files
- Include Path
I've tried doing some additional research on the topic and have yet to come up with a solution.
Edit 2:
Any ideas from anyone?
Your problem is likely related to your choice of folder layout. Which I assume you do, for "security reasons". That said, NetBeans isn't a server. Its an IDE, so you can't manipulate it the same way you would the server.
Most servers by default define your "root" folder as "public_html" or "www" as far as where it looks by default to serve files for public consumption. Through the use of PHP you can tell the index.php that comes with CodeIgniter to look up one directory outside of the defined root and have it read the file(s) accordingly.
However, to setup a project in netbeans and have all files and folder accounted for accordingly you need to tell it that all your files start in whatever folder they reside. So it can load all the files and read from them respectively. This in essence and in respect to server logic is telling it that the folder that houses
application
public_html
system
is the define root path. So inadvertantly by breaking out of the design of codeigniter and placing the core files outside of what would be your defined root on the server is breaking your project. There is not an index.php depicted in your listing above at the same level that those folders are in. If there is, its the index.php for xxamp that keeps loading for you by default.
What you need to do is stop trying to implement your "security measures" and put them in the right order. Or.. not include that folder in your project telling it the one with assets and index.php is the root path. If netbeans is smart enough it will find the files and folders outside like the server will.
Right click on your project and go to properties. Make sure that in the run configuration the URL is correct and the index file is properly set up and matches your directory in xxamp.
after downloading codeigniter open index.php file and there set your path correctly to your
application folder because i think you putted your index.php inside public_html folder so
the path which is set by default in index.php is not working and can not find application folder, try to fix it and it will work fine your problem is not with netbeans.
So I have this project in PHP where I have some include files next to the wwwroot (or doc-root) folder instead of under the wwwroot folder. I need however to run/debug this project. in the project properties I can select a index file (index.php) but it's under the doc-root folder, so the Project URL makes http://myprojectmachine/doc-root/index.php instead of ..://myprojectmachine/index.php. Manually typing in the index file doesn't work as NetBeans states the file isn't found. How can I overcome this in an elegant way?
I just had the same problem yesterday. You can select the correct document root by right-clicking on your project, selecting Properties and clicking the Browse button next to "Web root" in the Sources panel.
you can set the project URL when you create the project, which is the best time to do it if you think of it. It's the bottom option on the page where you choose the directory for the code.
Although, since you've already created it, you can easily change it in the project properties. I'm not 100% sure if this will work if you're doing it on your local machine; the only web-based projects I have open right now I'm working on through SFTP in NetBeans, but changing the settings to local web server, it shows the same option:
In the Projects pane, right-click on the project, and select Properties
Go to Run Configuration in the left-hand side of the window
You should see Project URL as the third option, here you set what you want as the root URL for the project. So you would simply have http://myprojectmachine/